Abundance of amoA genes of ammonia-oxidizing archaea and bacteria in activated sludge of full-scale wastewater treatment plants

In this study, the abundance and sequences of amoA genes of ammonia-oxidizing archaea (AOA) and bacteria (AOB) were determined in seven wastewater treatment plants (WWTPs) whose ammonium concentrations in influent and effluent wastewaters varied considerably (5.6-422.3 mgN l⁻¹ and 0.2-29.2 mgN l⁻¹, respectively). Quantitative real-time PCR showed that the comparative abundance of AOA and AOB amoA genes differed among the WWTPs. In all three industrial WWTPs, where the influent and effluent contained the higher levels of ammonium (36.1-422.3 mgN l⁻¹ and 5.3-29.2 mgN l⁻¹, respectively), more than four orders of magnitude higher numbers of AOB amoA genes than AOA amoA genes arose (with less than the limit of detection of AOA amoA genes). In contrast, significant numbers of AOA amoA genes occurred in all municipal WWTPs (with ammonium levels in the influent and effluent of 5.6-11.0 mgN l⁻¹ and 0.2-3.0 mgN l⁻¹, respectively). Statistical analysis suggested that compared to other plants’ parameters, the ammonium levels in the plants’ effluent showed correlation with the highest p value to the abundance of AOA amoA genes.     

Quartz crystal microbalance (QCM) affinity biosensor for genetically modified organisms (GMOs) detection

A DNA piezoelectric sensor has been developed for the detection of genetically modified organisms (GMOs). Single stranded DNA (ssDNA) probes were immobilised on the sensor surface of a quartz crystal microbalance (QCM) device and the hybridisation between the immobilised probe and the target complementary sequence in solution was monitored. The probe sequences were internal to the sequence of the 35S promoter (P) and Nos terminator (T), which are inserted sequences in the genome of GMOs regulating the transgene expression. Two different probe immobilisation procedures were applied: (a) a thiol-dextran procedure and (b) a thiol-derivatised probe and blocking thiol procedure. The system has been optimised using synthetic oligonucleotides, which were then applied to samples of plasmidic and genomic DNA isolated from the pBI121 plasmid, certified reference materials (CRM), and real samples amplified by the polymerase chain reaction (PCR). The analytical parameters of the sensor have been investigated (sensitivity, reproducibility, lifetime etc.). The results obtained showed that both immobilisation procedures enabled sensitive and specific detection of GMOs, providing a useful tool for screening analysis in food samples.     

Ultrasensitive DNA sensor based on gold nanoparticles/reduced graphene oxide/glassy carbon electrode

We have designed a simple and novel electrochemical biosensor based on glassy carbon electrode (GCE) for DNA detection. GCE was modified with reduced graphene oxide (RGO) and gold nanoparticles (AuNPs) by the electrochemical method, which is helpful for immobilization of thiolated bioreceptors. The electrode modification processes were characterized by scanning electron microscopy (SEM) and electrochemical methods. Then a single-stranded DNA (ssDNA) probe for BRCA1 5382 insC mutation detection was immobilized on the modified electrode for a specific time. The experimental conditions, such as probe immobilization time and target DNA (complementary DNA) hybridization time and temperature with probe DNA, were optimized using electrochemical methods. The electrochemical response for DNA hybridization and synthesis was measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods. The calibration graph contains two linear ranges; the first part is in the range of 3.0 × 10⁻²⁰ to 1.0 × 10⁻¹² M, and the second segment part is in the range of 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ M. The biosensor showed excellent selectivity for the detection of the complementary sequences from noncomplementary sequences, so it can be used for detection of breast cancer.     

Studies on the interaction of copper complexes of (-)-epicatechin gallate and (-)-epigallocatechin gallate with calf thymus DNA

The interaction of copper complexes of (−)-epicatechin gallate (ECG) and (−)-epigallocatechin gallate (EGCG) with calf thymus DNA (ct-DNA) was investigated by UV-visible (UV-Vis), fluorescence and circular dichroism along with melting studies. It was observed that both copper complexes quench the fluorescence intensity of ethidium bromide bound ct-DNA upon binding, resulting in a ground state complex formation by a static quenching process. The binding constants evaluated from fluorescence data were supported by the UV-Vis study. The values ranged from 0.84 to 1.07 × 10⁵ M⁻¹ and 1.14 to 1.04 × 10⁵ M⁻¹ for Cu(II)-ECG and Cu(II)-EGCG, respectively for the temperature range 21-42 °C with two binding sites. Thermodynamic parameters obtained are suggestive of the involvement of different modes of interaction during binding for each complex although both were found to be intercalating in nature. Circular dichroism studies and variations in the melting temperature reveal unwinding of the ct-DNA helix with conformational changes due to binding.     

Electrochemical biosensor for the detection of cauliflower mosaic virus 35 S gene sequences using lead sulfide nanoparticles as oligonucleotide labels

Lead sulfide (PbS) nanoparticles were synthesized in aqueous solution and used as oligonucleotide labels for electrochemical detection of the 35 S promoter from cauliflower mosaic virus (CaMV) sequence. The PbS nanoparticles were modified with mercaptoacetic acid and could easily be linked with CaMV 35 S oligonucleotide probe. Target DNA sequences were covalently linked on a mercaptoacetic acid self-assembled gold electrode, and DNA hybridization of target DNA with probe DNA was completed on the electrode surface. PbS nanoparticles anchored on the hybrids were dissolved in the solution by oxidation of HNO₃ and detected using a sensitive differential pulse anodic stripping voltammetric method. The detection results can be used to monitor the hybridization reaction. The CaMV 35 S target sequence was satisfactorily detected with the detection limit as 4.38 × 10⁻¹² mol/L (3σ). The established method extends nanoparticle-labeled electrochemical DNA analysis to specific sequences from genetically modified organisms with higher sensitivity and selectivity.     

Purification of polymerase chain reaction (PCR)-amplifiable DNA from compost piles containing bovine mortalities

Livestock production systems utilize composting as a method of disposal of livestock mortalities, but there is limited information on the rate and extent of carcass decomposition. Detection of specific DNA fragments by PCR offers a method for investigating the degradation of carcasses and other biological materials during composting. However, the purity of extracted DNA is critical for successful PCR analysis. We applied a method to purify DNA from compost samples and have tested the method by analyzing bovine and plant DNA targets after 0, 4, and 12 month of composting. The concentration of organic matter from composted material posed a particular challenge in obtaining pure DNA for molecular analysis. Initially extracted DNA from composted piles at day 147 was discoloured, and PCR inhibitors prevented amplification of target plant or bovine gene fragments. Bovine serum albumin improved detection by PCR (25–50 μl final volume) through the removal of inhibitors, but only when concentrations of humic acids in extracted DNA were 1.0 ng μl⁻¹ or less. Optimal purification of DNA from compost was achieved by chromatography using Sepharose 4B columns. The described DNA purification protocol enabled molecular monitoring of otherwise cryptic bovine and plant target genes throughout the composting process. The assay could likely be used to obtain PCR-amplifiable DNA that could be used for the detection of microbial pathogens in compost.     

PCR-Free Detection of Genetically Modified Organisms Using Magnetic Capture Technology and Fluorescence Cross-Correlation Spectroscopy

The safety of genetically modified organisms (GMOs) has attracted much attention recently. Polymerase chain reaction (PCR) amplification is a common method used in the identification of GMOs. However, a major disadvantage of PCR is the potential amplification of non-target DNA, causing false-positive identification. Thus, there remains a need for a simple, reliable and ultrasensitive method to identify and quantify GMO in crops. This report is to introduce a magnetic bead-based PCR-free method for rapid detection of GMOs using dual-color fluorescence cross-correlation spectroscopy (FCCS). The cauliflower mosaic virus 35S (CaMV35S) promoter commonly used in transgenic products was targeted. CaMV35S target was captured by a biotin-labeled nucleic acid probe and then purified using streptavidin-coated magnetic beads through biotin-streptavidin linkage. The purified target DNA fragment was hybridized with two nucleic acid probes labeled respectively by Rhodamine Green and Cy5 dyes. Finally, FCCS was used to detect and quantify the target DNA fragment through simultaneously detecting the fluorescence emissions from the two dyes. In our study, GMOs in genetically engineered soybeans and tomatoes were detected, using the magnetic bead-based PCR-free FCCS method. A detection limit of 50 pM GMOs target was achieved and PCR-free detection of GMOs from 5 µg genomic DNA with magnetic capture technology was accomplished. Also, the accuracy of GMO determination by the FCCS method is verified by spectrophotometry at 260 nm using PCR amplified target DNA fragment from GM tomato. The new method is rapid and effective as demonstrated in our experiments and can be easily extended to high-throughput and automatic screening format. We believe that the new magnetic bead-assisted FCCS detection technique will be a useful tool for PCR-free GMOs identification and other specific nucleic acids.     

An electrochemical DNA biosensor based on gold nanorods decorated graphene oxide sheets for sensing platform

A simple electrochemical sensor for sensitive and selective DNA detection was constructed based on gold nanorods (Au NRs) decorated graphene oxide (GO) sheets. The high-quality Au NRs–GO nanocomposite was synthesized via the electrostatic self-assembly technique, which is considered a potential sensing platform. Differential pulse voltammetry was used to monitor the DNA hybridization event using methylene blue as an electrochemical indicator. Under optimal conditions, the peak currents of methylene blue were linear with the logarithm of the concentrations of complementary DNA from 1.0 × 10⁻⁹ to 1.0 × 10⁻¹⁴ M with a detection limit of 3.5 × 10⁻¹⁵ M (signal/noise = 3). Moreover, the prepared electrochemical sensor can effectively distinguish complementary DNA sequences in the presence of a large amount of single-base mismatched DNA (1000:1), indicating that the biosensor has high selectivity.     

Growth, reproductive and photosynthetic responses to copper in the yellow-horned poppy, Glaucium flavum Crantz.

Glaucium flavum Crantz. is found in an anthropized coastal grassland at the joint estuary of the Tinto and Odiel rivers (SW Spain), growing under the influence of high levels of copper contamination derived from nearby petrochemical industries, with no obvious adverse affects on the performance of the plant. In addition, this species exhibits a series of ecological characteristics which may render it appropriate for use in the phytoremediation of contaminated areas. Nonetheless, the response of G. flavum to elevated copper concentrations has not been studied. A greenhouse experiment was conducted to investigate the effects of a range of Cu concentrations (0 to 47 mmol l⁻¹) on the growth, reproduction and photosynthetic performance of G. flavum, by measuring relative growth rate, fruit and seed production, chlorophyll fluorescence parameters, gas exchange and photosynthetic pigment concentrations. We also determined total copper, nitrogen, phosphorous, sulphur, calcium and magnesium concentrations. G. flavum survived with concentrations of up to 730 mg Cu kg⁻¹ DW in the leaves, when treated with 30 mmol Cu l⁻¹ (2000 mg l⁻¹). Quantum efficiency of PSII, net photosynthesis rate, as well as leaf Ca and Mg concentrations were all negatively affected by Cu concentrations greater than 9 mmol l⁻¹ in the nutrient solution. Our results indicate that the reduction in photosynthetic performance may be attributed to the adverse effect of excess Cu on the photosynthetic apparatus of the plant, both directly, via a decrease in pigment concentrations, and indirectly, via interference of Cu with Ca ions of PSII. Growth and seed production were only slightly affected by leaf tissue concentrations as high as 230 mg Cu kg⁻¹ dry mass, which suggests that this species could play an important role in phytoremediation of Cu-contaminated soils.     

Melting behavior and ligand binding of DNA intramolecular secondary structures

We use a variety of biophysical techniques to determine thermodynamic profiles, including hydration, for the unfolding of DNA stem-loop motifs (hairpin, a three-way junction and a pseudoknot) and their interaction with netropsin and random cationic copolymers. The unfolding thermodynamic data show that their helix-coil transition takes place according to their melting domains or sequences of their stems. All hairpins adopted the B-like conformation and their loop(s) contribute with an immobilization of structural water. The thermodynamic data of netropsin binding to the ^5′-AAATT-^3′/TTTAA site of each hairpin show affinities of ~ 10^6- 7 M^− 1, 1:1 stoichiometries, exothermic enthalpies of − 7 to − 12 kcal mol^− 1 (− 22 kcal mol^− 1 for the secondary site of the three-way junction), and water releases. Their interaction with random cationic copolymers yielded higher affinities of ~ 10⁶ M^− 1 with the more hydrophobic hairpins. This information should improve our current picture of how sequence and loops control the stability and melting behavior of nucleic acid molecules.     

Ethanol production from sweet sorghum juice using very high gravity technology: Effects of carbon and nitrogen supplementations

Ethanol production from sweet sorghum juice by Saccharomyces cerevisiae NP01 was investigated under very high gravity (VHG) fermentation and various carbon adjuncts and nitrogen sources. When sucrose was used as an adjunct, the sweet sorghum juice containing total sugar of 280 g l⁻¹, 3 g yeast extract l⁻¹ and 5 g peptone l⁻¹ gave the maximum ethanol production efficiency with concentration, productivity and yield of 120.68 ± 0.54 g l⁻¹, 2.01 ± 0.01 g l⁻¹ h⁻¹ and 0.51 ± 0.00 g g⁻¹, respectively. When sugarcane molasses was used as an adjunct, the juice under the same conditions gave the maximum ethanol concentration, productivity and yield with the values of 109.34 ± 0.78 g l⁻¹, 1.52 ± 0.01 g l⁻¹ h⁻¹ and 0.45 ± 0.01 g g⁻¹, respectively. In addition, ammonium sulphate was not suitable for use as a nitrogen supplement in the sweet sorghum juice for ethanol production since it caused the reduction in ethanol concentration and yield for approximately 14% when compared to those of the unsupplemented juices.     

Development of melting temperature-based SYBR Green I polymerase chain reaction methods for multiplex genetically modified organism detection

Commercialization of several genetically modified crops has been approved worldwide to date. Uniplex polymerase chain reaction (PCR)-based methods to identify these different insertion events have been developed, but their use in the analysis of all commercially available genetically modified organisms (GMOs) is becoming progressively insufficient. These methods require a large number of assays to detect all possible GMOs present in the sample and thereby the development of multiplex PCR systems using combined probes and primers targeted to sequences specific to various GMOs is needed for detection of this increasing number of GMOs. Here we report on the development of a multiplex real-time PCR suitable for multiple GMO identification, based on the intercalating dye SYBR Green I and the analysis of the melting curves of the amplified products. Using this method, different amplification products specific for Maximizer 176, Bt11, MON810, and GA21 maize and for GTS 40-3-2 soybean were obtained and identified by their specific Tm. We have combined amplification of these products in a number of multiplex reactions and show the suitability of the methods for identification of GMOs with a sensitivity of 0.1% in duplex reactions. The described methods offer an economic and simple alternative to real-time PCR systems based on sequence-specific probes (i.e., TaqMan chemistry). These methods can be used as selection tests and further optimized for uniplex GMO quantification.     

Synergistic production of L-arabinose from arabinan by the combined use of thermostable endo- and exo-arabinanases from Caldicellulosiruptor saccharolyticus

The optimum conditions for the production of l-arabinose from debranched arabinan were determined to be pH 6.5, 75 °C, 20 g l⁻¹ debranched arabinan, 42 U ml⁻¹ endo-1,5-α-l-arabinanase, and 14 U ml⁻¹ α-l-arabinofuranosidase from Caldicellulosiruptor saccharolyticus and the conditions for sugar beet arabinan were pH 6.0, 75 °C, 20 g l⁻¹ sugar beet arabinan, 3 U ml⁻¹ endo-1,5-α-l-arabinanase, and 24 U ml⁻¹ α-l-arabinofuranosidase. Under the optimum conditions, 16 g l⁻¹l-arabinose was obtained from 20 g l⁻¹ debranched arabinan or sugar beet arabinan after 120 min, with a hydrolysis yield of 80% and a productivity of 8 g l⁻¹ h⁻¹. This is the first reported trial for the production of l-arabinose from the hemicellulose arabinan by the combined use of endo- and exo-arabinanases.     

Denitrifying sulfide removal and carbon methanogenesis in a mesophilic, methanogenic culture

The inhibitory effects of 90-189 mg l⁻¹ of sulfide and 25-75 mg-N l⁻¹ of nitrate on methanogenesis were investigated in a mixed methanogenic culture using butyrate as carbon source. In the initial phase of 90 mg l⁻¹ S²⁻ test, autotrophic denitrification of nitrate occurred with sulfide as the electron donor. Then the sulfate-reducing strains converted the produced sulfur back to sulfide via heterotrophic oxidation pathway. Methanogenesis was not markedly inhibited when 90 mg l⁻¹ of sulfide was dosed alone. When 25-75 mg-N l⁻¹ of nitrate was presented, initiation of methanogenesis was seriously delayed. Nitrogen oxides (NO_x), the intermediates for nitrate reduction via denitrification pathway, inhibited methanogenesis. The 90 mg l⁻¹ of sulfide favored heterotrophic dissimilatory nitrate reduction to ammonia (DNRA) pathway for nitrate reduction. Possible ways of maximizing methane production from an organic carbon-rich wastewater with high levels of sulfide and nitrate were discussed.     

Anaerobic degradation of tetrachlorobisphenol-A in river sediment

This study investigated the anaerobic degradation of tetrachlorobisphenol-A (TCBPA) in sediment samples collected at three sites along the Erren River in southern Taiwan. TCBPA anaerobic degradation half-lives (t_1/2) in the sediment were 12.6, 16.9 and 21.7 d at concentrations of 50, 100, and 250 ??g g⁻¹, respectively. TCBPA (50 ??g g⁻¹) anaerobic degradation half-lives (t_1/2) in the sediment were 10.1, 11.8, 11.0, 11.6, 10.8, 9.1, 8.5, 18.2, 19.3, and 16.1 d by the addition of yeast extract (5 mg l⁻¹), cellulose (0.96 mg l⁻¹), sodium chloride (1%), brij 30 (130 mg l⁻¹), brij 35 (43 mg l⁻¹), rhamnolipid (55 ??M), surfactin (91 ??M), phthalic esters (2 mg l⁻¹), nonylphenol (2 mg l⁻¹), and heavy metals (2 mg l⁻¹), respectively. The degradation rate of TCBPA was enhanced by the addition of yeast extract, cellulose, sodium chloride, brij 30, brij 35, rhamnolipid, or surfactin. However, it was inhibited by the addition of phthalic esters, nonylphenol, or heavy metals. Also noted was the presence of dichlorobisphenol-A and bisphenol-A, two intermediate products resulting from the anaerobic degradation of TCBPA accumulated in the sediments.     

Actinoplanes utahensis ZJB-08196 fed-batch fermentation at elevated osmolality for enhancing acarbose production

Acarbose, a potent α-glucosidase inhibitor, is as an oral anti-diabetic drug for treatment of the type two, noninsulin-dependent diabetes. Actinoplanes utahensis ZJB-08196, an osmosis-resistant actinomycete, had a broad osmolality optimum between 309 mOsm kg⁻¹ and 719 mOsm kg⁻¹. Utilizing this unique feature, an fed-batch culture process under preferential osmolality was constructed through intermittently feeding broths with feed medium consisting of 14.0 g l⁻¹ maltose, 6.0 g l⁻¹ glucose and 9.0 g l⁻¹ soybean meal, at 48 h, 72 h, 96 h and 120 h. This intermittent fed-batch culture produced a peak acarbose titer of 4878 mg l⁻¹, increased by 15.9% over the batch culture.     

Butyric acid fermentation in a fibrous bed bioreactor with immobilized Clostridium tyrobutyricum from cane molasses

Butyrate fermentation by immobilized Clostridium tyrobutyricum was successfully carried out in a fibrous bed bioreactor using cane molasses. Batch fermentations were conducted to investigate the influence of pH on the metabolism of the strain, and the results showed that the fermentation gave a highest butyrate production of 26.2 g l⁻¹ with yield of 0.47 g g⁻¹ and reactor productivity up to 4.13 g l⁻¹ h⁻¹ at pH 6.0. When repeated-batch fermentation was carried out, long-term operation with high butyrate yield, volumetric productivity was achieved. Several cane molasses pretreatment techniques were investigated, and it was found that sulfuric acid treatment gave better results regarding butyrate concentration (34.6 ± 0.8 g l⁻¹), yield (0.58 ± 0.01 g g⁻¹), and sugar utilization (90.8 ± 0.9%). Also, fed-batch fermentation from cane molasses pretreated with sulfuric acid was performed to further increase the concentration of butyrate up to 55.2 g l⁻¹.     

Lactic acid production by Lactobacillus sp. RKY2 in a cell-recycle continuous fermentation using lignocellulosic hydrolyzates as inexpensive raw materials

Continuous lactic acid fermentations were conducted using lignocellulosic hydrolyzates and corn steep liquor as inexpensive raw materials. Lactic acid concentrations decreased with increases in the dilution rate, whereas the residual substrate concentrations increased. However, lactic acid yields were maintained at more than 0.90 g g⁻¹ over all cases experimented. The cell-recycle cultivation system exerted positive effects on fermentation efficiency, including volumetric productivity, which is attributable to the retention of cells in the bioreactor. The cell-recycle continuous fermentation of lignocellulosic hydrolyzates yielded a lactic acid productivity of 6.7 g l⁻¹ h⁻¹ for a dilution rate of 0.16 h⁻¹ using 30 g l⁻¹ of corn steep liquor and 1.5 g l⁻¹ of yeast extract as nutrients. The productivity (6.7 g l⁻¹ h⁻¹) acquired by the cell-recycle continuous fermentation of lignocellulosic hydrolyzates was 1.6 times higher than the lactic acid productivity yielded in the continuous fermentation without cell-recycle system.