Three D structures of chitosan

Crystal structures of two polymorphs of chitosan, tendon (hydrated) and annealed (anhydrous) polymorphs, have been reported. In both crystals, chitosan molecule takes up similar conformation (Type I form) to each other, an extended two-fold helix stabilized by intramolecular O3-O5 hydrogen bond, which is also similar to the conformation of chitin or cellulose. Three chitosan conformations other than Type I form have been found in the crystals of chitosan-acid salts. In the salts with acetic and some other acids, called Type II salts, chitosan molecule takes up a relaxed two-fold helix composed of asymmetric unit of tetrasaccharide. This conformation seems to be unstable because no strong intramolecular hydrogen bond like Type I form. Type II crystal changes to the annealed polymorph of chitosan by a spontaneous water-removing action of the acid. Chitosan molecule in its hydrogen iodide salt prepared at low temperature takes a 4/1 helix with asymmetric unit of disaccharide. The fourth chitosan conformation was found to be a 5/3 helix in chitosan salts with medical organic acids having phenyl group such as salicylic or gentisic acids. Similar conformation of chitosan molecule in the aspirin (acetylsalicylic acid) salt was suggested by a solid-sate NMR measurement.     

Crystalline behavior of chitosan organic acid salts.

The crystal structures of chitosan acid salts were studied by X-ray diffraction measurements on a fiber diagram and a new procedure to obtain an anhydrous polymorph of chitosan was found. The salts prepared by immersing a chitosan into a mixture of acid solution and isopropanol were classified into two types (Types I and II) depending on their conformation. Molecular conformation of the Type I salt retains the extended 2-fold helical structure of the original chitosan, but that of Type II salt is a twisted 2-fold helix. All the Type II salts changed to the anhydrous "Annealed" polymorph of chitosan when soaking in 75% aqueous isopropanol, but when the Type I salts were immersed in the solution, they returned to the hydrated "Tendon" polymorph which is that of the original chitosan. The strange transformation observed in Type II salt may be related to the stability of the molecular conformation of chitosan in the salt.     

Two different molecular conformations found in chitosan type II salts

The type II structure of chitosan acidic salts prepared from crab tendon in solid state was studied using an X-ray fiber diffraction technique together with the linked-atom least-squares (LALS) technique. The cylindrical Patterson method was applied to confirm the molecular conformation of the chitosan. It was shown that there are two different helical conformations for type II salts. One is the relaxed twofold helix having a tetrasaccharide as an asymmetric unit as found in chitosan.HCl salt, which was previously reported as a conformation of chitosan.HCOOH salt. The other is the fourfold helix having a disaccharide as an asymmetric unit newly found in chitosan.HI salt.     

Crystalline Behavior of Chitosan Organic Acid Salts

The crystal structures of chitosan acid salts were studied by X-ray diffraction measurements on a fiber diagram and a new procedure to obtain an anhydrous polymorph of chitosan was found. The salts prepared by immersing a chitosan into a mixture of acid solution and isopropanol were classified into two types (Types I and II) depending on their conformation. Molecular conformation of the Type I salt retains the extended 2-fold helical structure of the original chitosan, but that of Type II salt is a twisted 2-fold helix. All the Type II salts changed to the anhydrous “Annealed” polymorph of chitosan when soaking in 75% aqueous isopropanol, but when the Type I salts were immersed in the solution, they returned to the hydrated “Tendon” polymorph which is that of the original chitosan. The strange transformation observed in Type II salt may be related to the stability of the molecular conformation of chitosan in the salt.     

Conformational Behavior of Chitosan in the Acetate Salt: An X-Ray Study

A well-defined X-ray fiber pattern of chitosan acetate was obtained by immersing a tendon chitosan, prepared from a crab tendon chitin by a solid-state N-deacetylation, in an aqueous acetic acid-isopropanol solution at 110°C. This pattern was very similar to that of chitosan salts with some inorganic acids, such as HF, HCl, and H₂SO₄, in which chitosan chains form an 8/5 helix, indicating that chitosan acetate also take up this conformation. This information may give an influential clue to the chitosan conformation in the aqueous acetic acid solution, the most popular solvent for chitosan. However, after one month of storage of the chitosan acetate, the fiber pattern, the density and its IR spectrum changed to those of the anhydrous polymorph of chitosan, suggesting that the acetic acid was removed accompanied with water molecules from the crystal during storage and that the polymorph can be obtained not only by annealing chitosan, but also through the chitosan acetate.     

Plausible molecular and crystal structures of chitosan/HI type II salt

Chitosan/HI type II salt prepared from crab tendon was investigated by X-ray fiber diffraction. Two polymer chains and 16 iodide ions (I(-)) crystallized in a tetragonal unit cell with lattice parameters of a = b = 10.68(3), c (fiber axis) = 40.77(13) A, and a space group P4(1). Chitosan forms a fourfold helix with a 40.77 A fiber period having a disaccharide as the helical asymmetric unit. One of the O-3... O-5 intramolecular hydrogen bonds at the glycosidic linkage is weakened by interacting with iodide ions, which seems to cause the polymer to take the 4/1-helical symmetry rather than the extended 2/1-helix. The plausible orientations of two O-6 atoms in the helical asymmetric unit were found to be gt and gg. Two chains are running through at the corner and the center of the unit cell along the c-axis. They are linked by hydrogen bonds between N-21 and O-61 atoms. Two out of four independent iodide ions are packed between the corner chains while the other two are packed between the corner and center chains when viewing through the ab-plane. The crystal structure of the salt is stabilized by hydrogen bonds between these iodide ions and N-21, N-22, O-32, O-61, O-62 of the polymer chains.     

Salt-assisted acid hydrolysis of chitosan to oligomers under microwave irradiation

The effect of inorganic salts such as sodium chloride on the hydrolysis of chitosan in a microwave field was investigated. While it is known that microwave heating is a convenient way to obtain a wide range of products of different molecular weights only by changing the reaction time and/or the radiation power, the addition of some inorganic salts was shown to effectively accelerate the degradation of chitosan under microwave irradiation. The molecular weight of the degraded chitosan obtained by microwave irradiation was considerably lower than that obtained by traditional heating. Moreover, the molecular weight of degraded chitosan obtained by microwave irradiation assisted under the conditions of added salt was considerably lower than that obtained by microwave irradiation without added salt. Furthermore, the effect of ionic strength of the added salts was not linked with the change of molecular weight. FTIR spectral analyses demonstrated that a significantly shorter time was required to obtain a satisfactory molecular weight by the microwave irradiation-assisted inorganic salt method than by microwave irradiation without inorganic salts and conventional technology.     

Spinning of hydroalcoholic chitosan solutions

We investigated the spinning of hydroalcoholic chitosan solutions. The dope composition was optimized in order to obtain a continuous alcogel fiber by water evaporation on heating the extruded hydroalcoholic solution. This alcogel fiber was then neutralized in aqueous alkali baths and washed in water to eliminate the residual alcohol and salts before final drying. Depending on the alcohol content in the filament at the neutralization step, on specific alcohol–chitosan interactions and on the nature and concentration of the coagulation base, the process yielded semicrystalline chitosan fibers with different proportions of anhydrous and hydrated allomorphs. Contrarily to the classical annealing method, the formation of mainly anhydrous crystals was obtained without significant molecular weight decrease by neutralizing the polymer in hydrophobic conditions. The control of allomorph content was shown to be related to the hydrophobicity of the solvent (alcohol fraction) at the neutralization step.     

Molecular and crystal structures of chitosan/HI type I salt determined by X-ray fiber diffraction

The three-dimensional structure of chitosan/HI type I salt was determined by the X-ray fiber diffraction technique and linked-atom least-squares refinement method. Two polymer chains and four iodide ions (I(-)) crystallized in a monoclinic unit cell with dimensions a = 9.46(2), b = 9.79(2)], c (fiber axis)=10.33(2)A, beta = 105.2(2) degrees and a space group P2(1). Chitosan chains adopted an extended twofold helical conformation that was stabilized by O-3...O-5 hydrogen bonds, and the O-6 atom adopted nearly gt orientation. Polymer chains zigzag along the b-axis and directly connect to each other by N-2...O-6 hydrogen bonds. Two columns of iodide ions were shown to pack at the bending points of the zigzag sheets, and their locations are closely related to those of water columns in the hydrated chitosan. The iodide ions stabilized the salt structure by forming hydrogen bonds with the N-2 and O-6 atoms of the polymer chains together with an electrostatic interaction between N-2 and the iodide ions.     

Spectrophotometric quantification of lactic bacteria in alginate and control of cell release with chitosan coating

Lactococcus lactis ssp. cremoris was entrapped within a Ca-alginate matrix, and an in situ spectrophotometric method for monitoring cell population in calcium alginate beads described. The intracapsular cell population can be estimated by measuring the optical density of beads containing cells, using cell-free beads as reference, or by measuring absorbance of a liquified bead suspension. Alginate beads, and beads coated with chitosan type I, II, and I and II mixtures, were examined for cell release. Lower viscosity chitosan (type I) coatings reduced cell release by a factor of 100 from10⁵ cfu ml⁻¹ to 10³ cfu ml⁻¹ after 6 h of fermentation. Reuse of chitosan I coated alginate beads also showed a reduction in cell release by a factor of 100. Cell loading and initial cell growth within the beads greatly affected cell release. Reducing the initial cell release would lower the overall levels of cell release throughout the fermentation. Compared to non-immobilized cultures, a 20–40% reduction in the lactic acid production rate was observed for alginate beads and chitosan I coated alginate beads, respectively. This reduction can be compensated for by increasing the intracapsular cell loading during immobilization, or before the onset of fermentation.     

Topography of nucleic acid helices in solutions. The interaction specificities of optically active amino acid derivatives

The synthesis and interactions of the d- and l-enantiomers of the amino acid amide derivatives [Formula: see text] (I) and lysyl dipeptides [Formula: see text] (II) with poly rI.poly rC, poly rA.poly rU and calf thymus DNA is reported. The following results were found. (1) The degree of stabilization of the helices as measured by the T(m) (;melting' temperature) of the helix-coil transition was dependent on the nature of the amino acid. (2) For the poly rI.poly rC helix, the l-enantiomers of salts (I) and (II) stabilized more than the d-enantiomers. The same was true for calf thymus DNA in the presence of salts (II) and for poly rA.poly rU in the presence of salts (II) and the proline derivatives of salts (I). (3) As R increased in size and became more apolar, the amount of stabilization of the poly rI.poly rC helix in the presence of salts (I) decreased. On the other hand, the amount of stabilization increased with more polar substituents. An attempt was then made to determine whether the difference in stabilization of the double-stranded helices at the T(m) in the presence of the l- and d-enantiomers of salts (I) is due to the interaction with the helix, the random coil or both. A new method was developed for determining the binding of small ions to polyions that involves a competition between an insoluble polystyrene ion-exchange resin and the soluble polyion for the counterion. Dissociation constants are obtained for the complexes of single- and double-stranded helices with the salts (I). The results are illuminating and indicate that with certain helices, i.e. poly rA.poly rU, the interactions of salts (I) with the single strands may not be ignored. It is concluded that the high optical specificity found in Nature, i.e. d-ribose in nucleic acids and l-amino acids in proteins, cannot be attributed solely to monomer-polymer interactions described by Gabbay (1968).     

Forming and removing stain precipitates on ultrathin sections

Stain precipitates resulting from the use of lead or uranyl salts, or both, on ultrathin sections can be classified as belonging to one of three morphological types: I) extremely electron-dense particles caused by prolonged use of lead salts only, II) amorphous networks formed following double staining with either aqueous or alcoholic uranyl and lead salts, and III) crystalline needles sometimes resulting from double staining with alcoholic uranyl and lead salts. It has been found, however, that either acetic acid or aqueous uranyl acetate can be used to remove type I and type II precipitates from sections, and that oxalic acid and alcoholic uranyl solution will remove type II precipitates. Unfortunately, type III precipitates are unaffected by any agents tested so far.     

Forming and Removing Stain Precipitates on Ultrathin Sections

Stain precipitates resulting from the use of lead or uranyl salts, or both, on ultrathin sections can be classified as belonging to one of three morphological types: I) extremely electron-dense particles caused by prolonged use of lead salts only, II) amorphous networks formed following double staining with either aqueous or alcoholic uranyl and lead salts, and III) crystalline needles sometimes resulting from double staining with alcoholic uranyl and lead salts. It has been found, however, that either acetic acid or aqueous uranyl acetate can be used to remove type I and type II precipitates from sections, and that oxalic acid and alcoholic uranyl solution will remove type II precipitates. Unfortunately, type III precipitates are unaffected by any agents tested so far.     

A material decoy of biological media based on chitosan physical hydrogels: application to cartilage tissue engineering

The cartilage tissue has a limited self-regenerative capacity. Tissue-engineering represents a promising trend for cartilage repair. The present study was aimed to develop a biomaterial formulation by combining fragments of chitosan hydrogel with isolated rabbit or human chondrocytes. We first reported the properties of the constructs elaborated with rabbit chondrocytes and pure chitosan physical hydrogels with defined molecular weight, acetylation degree and polymer concentration. Morphological data showed that chondrocytes were not penetrating the hydrogels but tightly bound to the surface of the fragments and spontaneously formed aggregates of combined cell/chitosan. A significant amount of neo-formed cartilage-like extracellular matrix (ECM) was first accumulated in-between cells and hydrogel fragments and furthermore was widely distributed within the neo-construct. The optimal biological response was obtained with hydrogel fragments concentrated at 1.5% (w/w) of polymer made from a chitosan with a degree of acetylation between 30 and 40%. Such hydrogels were then mixed with human chondrocytes. The phenotype of the cells was analyzed by using chondrocytic (mRNA expression of mature type II collagen and aggrecan as well as secretion of proteoglycans of high molecular weight) and non chondrocytic (mRNA expression of immature type II collagen and type I collagen) molecular markers. As compared with human chondrocytes cultured without chitosan hydrogel which rapidly dedifferentiated in primary culture, cells mixed with chitosan rapidly loose the expression of type I and immature type II collagen while they expressed mature type II collagen and aggrecan. In these conditions, chondrocytes maintained their phenotype for as long as 45 days, thus forming cartilage-like nodules. Taken together, these data suggest that a chitosan hydrogel does not work as a scaffold, but could be considered as a decoy of cartilage ECM components, thus favoring the binding of chondrocytes to chitosan. Such a biological response could be described by the concept of reverse encapsulation.     

Biochemistry of fish antifreeze proteins

Four distinct macromolecular antifreezes have been isolated and characterized from different marine fish. These include the glycoprotein antifreezes (Mr 2.5-33 K), which are made up of a repeating tripeptide (Ala-Ala-Thr)n with a disaccharide attached to the threonyl residues, and three antifreeze protein (AFP) types. Type I is an alanine-rich, amphiphilic, alpha-helix (Mr 3-5 K); type II is a larger protein (Mr 14 K) with a high content of reverse turns and five disulfide bridges; and type III is intermediate in size (Mr 6-7 K) with no distinguishing features of secondary structure or amino acid composition. Despite their marked structural differences, all four antifreeze types appear to function in the same way by binding to the prism faces of ice crystals and inhibiting growth along the a-axes. It is suggested that type I AFP binds preferentially to the prism faces as a result of interactions between the helix macrodipole and the dipoles on the water molecules in the ice lattice. Binding is stabilized by hydrogen bonding, and the amphiphilic character of the helix results in the hydrophobic phase of the helix being exposed to the solvent. When the solution temperature is lowered further, ice crystal growth occurs primarily on the uncoated, unordered basal plane resulting in bipyramidal-shaped crystals. The structural features of type I AFP that could contribute to this mechanism of action are reviewed. Current challenges lie in solving the other antifreeze structures and interpreting them in light of what appears to be a common mechanism of action.     

Alkaline chitosan solutions

Rigid and transparent hydrogels were obtained upon pouring chitosan salt solutions into saturated ammonium hydrogen carbonate. Incubation at 20 degrees C for 5 days yielded chitosan carbamate ammonium salt, Chit-NHCO(2)(-)NH(4)(+) a chemical species that either by hydrolysis or by thermal treatment decomposed to restore chitosan in free amine form. Chitosans of different degrees of acetylation, molecular sizes and origins (squid and crustaceans) were used as hydrochloride, acetate, glycolate, citrate and lactate salts. Their hydrogels obtained in ammonium hydrogen carbonate yielded chitosan solutions at pH values as high as 9.6, from which microspheres of regenerated chitosans were obtained upon spray-drying. These materials had a modest degree of crystallinity depending on the partial acylation that took place at the sprayer temperature (168 degrees C). Citrate could cross-link chitosan and impart insolubility to the microspheres. Chloride on the contrary permitted to prepare microspheres of chitosan in free amine form. By the NH(4)HCO(3) treatment, the cationicity of chitosan could be reversibly masked in view of mixing chitosan with alginate in equimolar ratio without coacervation. The clear and poorly viscous solutions of mixed chitosan carbamate and alginate were spray-dried at 115 degrees C to manufacture chitosan-alginate microspheres having prevailing diameter approx 2 micron.     

Morphological and surface properties of electrospun chitosan nanofibers

Nonwoven fiber mats of chitosan with potential applications in air and water filtration were successfully made by electrospinning of chitosan and poly(ethyleneoxide) (PEO) blend solutions. Electrospinning of pure chitosan was hindered by its limited solubility in aqueous acids and high degree of inter- and intrachain hydrogen bonding. Nanometer-sized fibers with fiber diameter as low as 80 +/- 35 nm without bead defects were made by electrospinning high molecular weight chitosan/PEO (95:5) blends. Fiber formation was characterized by fiber shape and size and was found to be strongly governed by the polymer molecular weight, blend ratios, polymer concentration, choice of solvent, and degree of deacetylation of chitosan. Weight fractions of polymers in the electrospun nonwoven fibers mats were determined by thermal gravimetric analysis and were similar to ratio of polymers in the blend solution. Surface properties of fiber mats were determined by measuring the binding efficiency of toxic heavy metal ions like chromium, and they were found to be related with fiber composition and structure.     

Use of novel cationic bile salts in cholesterol crystallization and solubilization in vitro

Unnatural bile salts have been synthesized with a cationic group at the side chain of natural bile acids. These cationic bile salts aggregate in water and aqueous salt solutions in a manner similar to their natural counterparts. The critical micellar concentrations of the cationic bile salts were measured using a fluorescence method. Cationic bile salts aggregated at a concentration lower than natural deoxycholic acid. Since dihydroxy bile salt micelles are well known for cholesterol dissolution/removal, the dissolution in the cationic micelles has been evaluated. The cationic analogs dissolve approximately 70 mg/dL of cholesterol, which is comparable to taurochenodeoxycholate micelle under identical bile salt concentrations. Cholesterol dissolution in cationic bile salt micelle enhanced upon adding various amounts of PC. Cholesterol crystallization was studied in model bile at various cationic bile salt concentrations. The addition of 5, 15 and 30 mM of the cationic bile salts attenuated the crystallization process, without influencing the crystal observation time or decreasing the final amount of crystals formed. All these effects were comparable to those observed with cholic acid. These findings suggest that cationic bile salts have physico-chemical properties analogous to those of natural anionic bile salts, and thus may have therapeutic potential.     

The role of helix 1 aspartates and salt bridges in the stability and conversion of prion protein

A key event in the pathogenesis of transmissible spongiform encephalopathies is the conversion of PrP-sen to PrP-res. Morrissey and Shakhnovich (Morrissey, M. P., and Shakhnovich, E. I. (1999) Proc. Natl. Acad. Sci. U. S. A. 96, 11293-11298) proposed that the conversion mechanism involves critical interactions at helix 1 (residues 144-153) and that the helix is stabilized on PrP-sen by intra-helix salt bridges between two aspartic acid-arginine ion pairs at positions 144 and 148 and at 147 and 151, respectively. Mutants of the hamster prion protein were constructed by replacing the aspartic acids with either asparagines or alanines to destabilize the proposed helix 1 salt bridges. Thermal and chemical denaturation experiments using circular dichroism spectroscopy indicated the overall structures of the mutants are not substantially destabilized but appear to unfold differently. Cell-free conversion reactions performed using ionic denaturants, detergents, and salts (conditions unfavorable to salt bridge formation) showed no significant differences between conversion efficiencies of mutant and wild type proteins. Using conditions more favorable to salt bridge formation, the mutant proteins converted with up to 4-fold higher efficiency than the wild type protein. Thus, although spectroscopic data indicate the salt bridges do not substantially stabilize PrP-sen, the cell-free conversion data suggest that Asp-144 and Asp-147 and their respective salt bridges stabilize PrP-sen from converting to PrP-res.     

Novel chitosan/collagen scaffold containing transforming growth factor-beta1 DNA for periodontal tissue engineering

The current rapid progression in tissue engineering and local gene delivery system has enhanced our applications to periodontal tissue engineering. In this study, porous chitosan/collagen scaffolds were prepared through a freeze-drying process, and loaded with plasmid and adenoviral vector encoding human transforming growth factor-beta1 (TGF-beta1). These scaffolds were evaluated in vitro by analysis of microscopic structure, porosity, and cytocompatibility. Human periodontal ligament cells (HPLCs) were seeded in this scaffold, and gene transfection could be traced by green fluorescent protein (GFP). The expression of type I and type III collagen was detected with RT-PCR, and then these scaffolds were implanted subcutaneously into athymic mice. Results indicated that the pore diameter of the gene-combined scaffolds was lower than that of pure chitosan/collagen scaffold. The scaffold containing Ad-TGF-beta1 exhibited the highest proliferation rate, and the expression of type I and type III collagen up-regulated in Ad-TGF-beta1 scaffold. After implanted in vivo, EGFP-transfected HPLCs not only proliferated but also recruited surrounding tissue to grow in the scaffold. This study demonstrated the potential of chitosan/collagen scaffold combined Ad-TGF-beta1 as a good substrate candidate in periodontal tissue engineering.