Role of terminal nonhomologous domains in initiation of human red cell spectrin dimerization

Human erythrocyte spectrin is an antiparallel heterodimer comprised of a 280 kDa alpha subunit and a 246 kDa beta subunit which further associates into tetramers in the red cell membrane cytoskeleton. Lateral association of the flexible rodlike monomers involves a multiple-step process that is initiated by a high affinity association near the actin-binding end of the molecule (dimer nucleation site). In this study, recombinant alpha and beta proteins comprising two or four "spectrin type" motifs with and without adjacent, terminal nonhomologous domains were evaluated for their relative contributions to dimer initiation, and the thermodynamic properties of these heterodimer complexes were measured. Sedimentation equilibrium studies showed that in the absence of the heterologous subunit, individual recombinant proteins formed weak homodimers (K(d) > 0.3 mM). When 2-motif (alpha20-21 and beta1-2) and 4-motif (alpha18-21 and beta1-4) recombinants lacking the terminal nonhomologous domains were paired with the complementary protein, high affinity heterodimers were formed in sedimentation equilibrium analysis. Both the alpha20-21/beta1-2 complex and the alpha20-21EF/betaABD1-2 complex showed stoichiometric binding with similar binding affinities (K(d) approximately 10 nM) using isothermal titration calorimetry. The alpha20-21/beta1-2 complex showed an enthalpy of -10 kcal/mol, while the alpha20-21EF/betaABD1-2 complex showed an enthalpy of -13 kcal/mol. Pull-down assays using alpha spectrin GST fusion proteins showed strong associations between all heterodimer complexes in physiological buffer, but all heterodimer complexes were destabilized by the presence of Triton X-100 and other detergents. Complexes lacking the nonhomologous domains were destabilized to a greater extent than complexes that included the nonhomologous domains. The detergent effect appears to be responsible for the apparent essential role of the nonhomologous domains in prior reports. Taken together, our results indicate that the terminal nonhomologous domains do not contribute to dimer initiation nor are they required for formation of high affinity spectrin heterodimers in physiological buffers.     

Initiation and propagation of spectrin heterodimer assembly involves distinct energetic processes

Red cell spectrin alpha and beta subunits consist primarily of many tandem homologous motifs with very similar three- helix-bundle structures and similar dimer interfaces. Although misassembled homodimers can form under some conditions, correctly aligned heterodimers consistently assemble provided a small "dimer initiation" site near the actin binding domain is present. The dimer initiation site has been characterized to some extent, but little is known about the subsequent, low-affinity lateral interactions of the remaining motifs along the length of this ropelike molecule or the forces involved in these two steps of the dimerization process. In this study, we used isothermal titration calorimetry to deduce the mechanism and energetics of the two heterodimer assembly phases. The high-affinity initiation of dimerization is primarily enthalpically driven, which is consistent with initial alignment and docking of specific complementary alpha and beta motifs in the dimer initiation site driven by long-range electrostatic interactions followed by tight binding stabilized by hydrogen bonds and other hydrophilic interactions. In contrast, the subsequent weak lateral associations of additional motifs are primarily entropically driven, suggesting binding primarily involves weak hydrophobic interactions. Although initial docking is largely electrostatic, the only lateral interaction within the first four pairs of motifs that involves a net change in protons is the interaction of the alpha18 and beta4 repeats. This substoichiometric uptake of protons could be due to a pKa shift of a histidine in the alpha18 motif located near the dimer interface in a proposed homology-based model. On the basis of this analysis of heterodimer thermodynamics, a detailed model of spectrin dimer assembly is proposed.     

Properties of human red cell spectrin heterodimer (side-to-side) assembly and identification of an essential nucleation site.

The antiparallel side-to-side association of spectrin alpha and beta monomers is a two-step process which occurs in seconds even at 0 degrees C and at low concentrations. Assembly involves initial contact of complementary nucleation sites on each subunit, which are located near the actin binding end of the long, flexible heterodimer rod. The minimum nucleation sites are comprised of approximately four contiguous 106-residue homologous segments or repeats. Three repeats in the nucleation site contain an 8-residue insertion and have the highest homology to the four spectrin-like repeats in alpha-actinin. The adjacent actin binding domain on the beta subunit and the adjacent EF hand motifs on the alpha subunit are not required for heterodimer assembly. The nucleation sites probably have a specific lock and key structure which defines the unique side-to-side pairing of the many homologous segments in both subunits. Assembly of spectrin heterodimers is probably most analogous to a zipper. After initial nucleation site binding, the remainder of the subunits quickly associate along their full lengths to reconstitute a normal dimer by supercoiling around each other to form a rope-like, flexible rod. Assembly is terminated if either polypeptide is interrupted by a protease cleavage. Heterozygotic mutations involving either nucleation site are predicted to affect allele incorporation into the mature membrane skeleton.     

alpha beta Spectrin coiled coil association at the tetramerization site

On the basis of sequence homology studies, it has been suggested that the association of human erythrocytes alpha and beta spectrin at the tetramerization site involves interactions between helices. However, no empirical details are available, presumably due to the experimental difficulties in studying spectrin molecules because of its size and/or its structural flexibility. It has been speculated that erythrocyte tetramerization involves helical bundling rather than coiled coil association. We have used recombinant spectrin peptides to model alpha and beta spectrin to study their association at the tetramerization site. Two alpha peptides, Sp alpha 1-156 and Sp alpha 1-368, and one beta peptide, Sp beta 1898-2083, were used as model peptides to demonstrate the formation of the alpha beta complex. We also found that the replacement of R28 in Sp alpha 1-368 to give Sp alpha 1-368R28C abolished complex formation with the beta peptide. Circular dichroism techniques were used to monitor the secondary structures of the individual peptides and of the complex, and the results showed that both Sp alpha 1-156 and Sp beta 1898-2083 peptides in solution, separately, included helices that were not paired with other helices in the absence of their binding partners. However, in a mixture of Sp alpha 1-156 and Sp beta 1898-2083 and formation of the alpha beta complex, the unpaired helices associated to form coiled coils. Since the sequences of these two peptides that are involved in the coiled coil association are derived from a native protein, the information obtained from this study also provides insight toward a better understanding of naturally occurring coiled coil subunit-subunit association.     

Double mutation at the subunit interface of glutathione transferase rGSTM1-1 results in a stable, folded monomer

Canonical glutathione (GSH) transferases are dimeric proteins with subunits composed of an N-terminal GSH binding region (domain 1) and a C-terminal helical region (domain 2). The stabilities of several GSH transferase dimers are dependent upon two groups of interactions between domains 1 and 2 of opposing subunits: a hydrophobic ball-and-socket motif and a buried charge cluster motif. In rGSTM1-1, these motifs involve residues F56 and R81, respectively. The structural basis for the effects of mutating F56 to different residues on dimer stability and function has been reported (Codreanu et al. (2005) Biochemistry 44, 10605-10612). Here, we show that the simultaneous disruption of both motifs in the F56S/R81A mutant causes complete dissociation of the dimer to a monomeric protein on the basis of gel filtration chromatography and multiple-angle laser light scattering. The fluorescence and far-UV CD properties of the double mutant as well as the kinetics of amide H/D exchange along the polypeptide backbone suggest that the monomer has a globular structure that is similar to a single subunit in the native protein. However, the mutant monomer has severely impaired catalytic activity, suggesting that the dimer interface is vital for efficient catalysis. Backbone amide H/D exchange kinetics in the F56S and F56S/R81A mutants indicate that a reorganization of the loop structure between helix alpha2 and strand beta3 near the active site is responsible for the decreased catalytic activity of the monomer. In addition, the junction between the alpha4 and alpha5 helices in F56S/R81R shows decreased H/D exchange, indicating another structural change that may affect catalysis. Although the native subunit interface is important for dimer stability, urea-induced unfolding of the F56S/R81A mutant suggests that the interface is not essential for the thermodynamic stability of individual subunits. The H/D exchange data reveal a possible molecular basis for the folding cooperativity observed between domains 1 and 2.     

Studies of the erythrocyte spectrin tetramerization region

Human erythrocyte spectrin dimers associate at the N-terminal region of alpha spectrin (alpha N) and the C-terminal region of beta-spectrin (beta C) to form tetramers. We have prepared model peptides to study the tetramerization region. Based on phasing information obtained from enzyme digests, we prepared spectrin fragments consisting of the first 156 amino-acid residues and the first 368 amino-acid residues of alpha-spectrin (Sp alpha 1-156 and Sp alpha 1-368, respectively), and found that both peptides associate with a beta-spectrin model peptide, with an affinity similar to that found in alpha beta dimer tetramerization. Spin label EPR studies show that the region consisting of residues 21-46 in alpha-spectrin is helical even in the absence of its beta-partner. Multi-dimensional nuclear magnetic resonance studies of samples with and without a spin label attached to residue 154 show that Sp alpha 1-156 consists of four helices, with the first helix unassociated with the remaining three helices, which bundle to form a triple helical coiled coil bundle. A comparison of the structures of erythrocyte spectrin with other published structures of Drosophila and chicken brain spectrin is discussed. Circular dichroism studies show that the lone helix in Sp alpha-156 associates with helices in the beta peptide to form a coiled coil bundle. Based on NMR and CD results, we suggest that the helices in Sp alpha 1-156 exhibit a looser (frayed) conformation, and that the helices convert to a tighter conformation upon association with its beta-partner. This suggestion does not rule out possible conversion of a non-structured conformation to a structured conformation in various parts of the molecule upon association. Spectrin mutations at residues 28 and 45 of alpha-spectrin have been found in patients with hereditary elliptocytosis. NMR studies were also carried out on Sp alpha 1-156R28S, Sp alpha 1-156R45S and Sp alpha 1-156R45T. A comparison of the structures of Sp alpha 1-156 and Sp alpha 1-156R28S, Sp alpha 1-156R45S and Sp alpha 1-156R45T is discussed.     

Analysis of human red cell spectrin tetramer (head-to-head) assembly using complementary univalent peptides.

The mass-driven assembly of spectrin dimers to form tetramers involves two equal head-to-head alpha-beta associations and requires at least 30 degrees C for interconversion to occur readily. In this paper, the properties of tetramer formation were investigated using two complementary univalent peptides (the alpha I domain and beta monomers). Since the alpha I domain lacks an essential nucleation site required for side-to-side (lateral) heterodimer assembly [Speicher et al. (1992) J. Biol. Chem. 267, 14775-14782], these two peptides can only assemble head-to-head at a single site. This head-to-head assembly readily occurs at lower temperatures, indicating the temperature barrier for dimer-tetramer interconversion is caused by a conformational constraint of the dimer. This constraint, a closed hairpin loop, is released when the laterally associated partner is removed. The univalent alpha I-beta binding affinity at 37 degrees C (Ka = 1.4 x 10(5) M-1) is similar to the dimer-tetramer association constant at the same temperature. As the temperature is decreased from 37 to 0 degrees C, the alpha I-beta binding affinity increases about 32-fold. In contrast with head-to-head associations involving dimers, the second-order rate constants of two complementary univalent peptides (i.e., alpha I and beta) are dramatically higher, and the estimated activation energy (about 50 kJ mol-1) is about 5-fold lower. An open dimer conformation is an obligatory high-energy intermediate required for dimer-tetramer interconversion, and opening the dimer hairpin loop contributes about 190 kJ mol-1 to the activation energy for tetramer association.(ABSTRACT TRUNCATED AT 250 WORDS)     

Calmodulin inhibits the phosphorylation of spectrin in vitro

In vitro phosphorylation of purified spectrin dimer was studied in the presence of Ca2+-calmodulin (CaM). CaM inhibited autophosphorylation of the beta subunit of spectrin. The inhibitory effect (65% at a 32-fold molar excess) appeared to be due to a weak interaction of CaM with spectrin. CaM was similarly effective in a phosphatase-stimulated autothiophosphorylation of the beta subunit with [gamma-35S]ATP. Hence, its inhibitory effect was not due to stimulation of a spectrin-associated phosphatase activity. Phosphorylation of spectrin by the catalytic subunit of a cAMP-dependent protein kinase occurred in both subunits (1984, FEBS Lett. 169, 323). CaM selectively inhibited a cAMP-dependent phosphorylation of the alpha subunit of spectrin to 30% at two CaM per spectrin. It was ineffective on the cAMP-dependent phosphorylation of the beta subunit up to a 32-fold molar excess. These results yield functional evidence for a CaM-spectrin interaction. They further suggest that CaM can regulate the extent of a cAMP-dependent phosphorylation of the alpha subunit of spectrin.     

In vitro proteolysis of brain spectrin by calpain I inhibits association of spectrin with ankyrin-independent membrane binding site(s).

This report demonstrates that specific proteolysis of brain spectrin by a calcium-dependent protease, calpain I, abolishes association of brain spectrin with the ankyrin-independent binding site(s) in brain membranes. Calpain I cleaves the beta subunit of spectrin at the N-terminal end leaving a 218-kDa fragment and cleaves the alpha subunit in the midregion to produce 150- and 130-kDa fragments. Calpain-proteolyzed spectrin almost completely loses the capacity to displace binding of intact spectrin to membranes. Spectrin digested by calpain I under conditions that almost completely destroyed membrane-binding remained associated as a tetramer and retained about 60% of the ability to associate with actin filaments. Cleavage of spectrin occurred at sites distinct from the membrane-binding site which is located on the beta subunit since the isolated 218-kDa fragment of the beta subunit as well as a reconstituted complex of alpha and 218-kDa beta subunit fragment partially regained binding activity. Moreover, cleavage of the alpha subunit alone reduced the affinity of spectrin for membranes by 2-fold. A consequence of distinct sites for calpain I cleavage and membrane-binding is that calpain I can digest spectrin while spectrin is complexed with other proteins and therefore has the potential to mediate disassembly of a spectrin-actin network from membranes.     

Three-dimensional structure of rat acid phosphatase.

The crystal structure of recombinant rat prostatic acid phosphatase was determined to 3 A resolution with protein crystallographic methods. The enzyme subunit is built up of two domains, an alpha/beta domain consisting of a seven-stranded mixed beta-sheet with helices on both sides of the sheet and a smaller alpha domain. Two disulfide bridges between residues 129-340 and 315-319 were found. Electron density at two of the glycosylation sites for parts of the carbohydrate moieties was observed. The dimer of acid phosphatase is formed through two-fold interactions of edge strand 3 from one subunit with strand 3 from the second subunit, thus extending the beta-sheet from seven to 14 strands. Other subunit-subunit interactions involve conserved residues from loops between helices and beta-strands. The fold of the alpha/beta domain is similar to the fold observed in phosphoglycerate mutase. The active site is at the carboxy end of the parallel strands of the alpha/beta domain. There is a strong residual electron density at the phosphate binding site which probably represents a bound chloride ion. Biochemical properties and results from site-directed mutagenesis experiments of acid phosphatase are correlated to the three-dimensional structure.     

Characterization of the lateral interaction between human erythrocyte spectrin subunits.

A technique in which the subunits of human erythrocyte spectrin were immobilized on a nitrocellulose membrane was developed to study which domains of the subunit are able to bind to the counterpart subunit. The limited tryptic digestion of the isolated alpha and beta subunits of human erythrocyte spectrin produced eight fragments in the alpha subunits and nine fragments in the beta subunit. Four fragments of the beta (80, 60, 44, and 18 kDa) and two of the alpha (82 and 33 kDa) bound to alpha and beta subunits which were immobilized on nitrocellulose membrane strips, respectively. The binding affinities of all the fragments to the subunits, however, were remarkably lower than that of the mother proteins. The titration of fluorescence anisotropy of N-(1-anilinonaphthyl-4)maleimide which was covalently attached to the subunit by the trypsin-digested fraction of the counterpart subunit also indicate weak binding of the fragments even in solution. These findings suggest that the high-affinity binding of the alpha subunit to the beta subunit to form spectrin alpha beta dimer occurs only when the binding domains are arrayed along the polypeptide chains at the appropriate positions on the subunits.     

Signaling domain of the aspartate receptor is a helical hairpin with a localized kinase docking surface: cysteine and disulfide scanning studies.

Cysteine and disulfide scanning has been employed to probe the signaling domain, a highly conserved motif found in the cytoplasmic region of the aspartate receptor of bacterial chemotaxis and related members of the taxis receptor family. Previous work has characterized the N-terminal section of the signaling domain [Bass, R. B., and Falke, J. J. (1998) J. Biol. Chem. 273, 25006-25014], while the present study focuses on the C-terminal section and the interactions between these two regions. Engineered cysteine residues are incorporated at positions Gly388 through Ile419 in the signaling domain, thereby generating a library of receptors each containing a single cysteine per receptor subunit. The solvent exposure of each cysteine is ascertained by chemical reactivity measurements, revealing a periodic pattern of buried hydrophobic and exposed polar residues characteristic of an amphipathic alpha-helix, denoted helix alpha8. The helix begins between positions R392 and Val401, then continues through the last residue scanned, Ile419. Activity assays carried out both in vivo and in vitro indicate that both the buried and exposed faces of this amphipathic helix are critical for proper receptor function and the buried surface is especially important for kinase downregulation. Patterns of disulfide bond formation suggest that helix alpha8, together with the immediately N-terminal helix alpha7, forms a helical hairpin that associates with a symmetric hairpin from the other subunit of the homodimer, generating an antiparallel four helix bundle containing helices alpha7, alpha7', alpha8, and alpha8'. Finally, the protein-interactions-by-cysteine-modification (PICM) method suggests that the loop between helices alpha7 and alpha8 interacts with the kinase CheA and/or the coupling protein CheW, expanding the receptor surface implicated in kinase docking.     

Glucocorticoid receptor-like Zn(Cys)4 motifs in BslI restriction endonuclease

BslI restriction endonuclease cleaves the symmetric sequence CCN(7)GG (where N=A, C, G or T). The enzyme is composed of two subunits, alpha and beta, that form a heterotetramer (alpha(2)beta(2)) in solution. The alpha subunit is believed to be responsible for DNA recognition, while the beta subunit is thought to mediate cleavage. Here, for the first time, we provide experimental evidence that BslI binds Zn(II). Specifically, using X-ray absorption spectroscopic analysis we show that the alpha subunit of BslI contains two Zn(Cys)(4)-type zinc motifs similar to those in the DNA-binding domain of the glucocorticoid receptor. This conclusion is supported by genetic analysis of the zinc-binding motifs, whereby amino acid substitutions in the zinc finger motifs are demonstrated to abolish or impair cleavage activity. An additional putative zinc-binding motif was identified in the beta subunit, consistent with the X-ray absorption data. These data were corroborated by proton induced X-ray emission measurements showing that full BslI contains at least three fully occupied Zn sites per alpha/beta heterodimer. On the basis of these data, we propose a role for the BslI Zn motifs in protein-DNA as well as protein-protein interactions.     

Ion-channel formation assisted by electrostatic interhelical interactions in covalently dimerized amphiphilic helical peptides

An ultimate goal of synthetic ion-channel peptide design is to construct stable and functional ion-conducting pores. It is expected that specific interhelical interactions would facilitate the association of helices in phospholipid membranes and the successive helix-bundle formation. In the present study, we rationally designed helix-bundle ion channels using the synthetic hybrid peptide K20E20, a disulfide dimer of cationic- and anionic-amphiphilic helices Ac-CGG-(BKBA) 5-NH 2 and Ac-CGG-(BEBA) 5-NH 2. Circular dichroism (CD) measurements in aqueous media implied helix stabilization in the peptide caused by the interhelical electrostatic interactions. In addition, CD spectra recorded in the presence of DPPC liposomes and dye-leakage measurements suggested a high degree of association of peptide monomers in phospholipid membranes as well as high affinities between peptide and lipid bilayers. These features allowed ion-channel formation at extremely low peptide concentrations (as low as 1 nM). According to electrophysiological analyses, stable helix bundles were constructed of six peptide helices by association of three K20E20 molecules. Helix-helix association in lipid membranes, peptide-membrane interactions, and ion-channel formation of K20E20 peptides were all facilitated by intramolecular electrostatic interactions between the helices of the hybrid peptide and were pH-dependent. Conductance through K20E20 ion channels decreased under acidic conditions because of the interruption of the salt bridges.     

Cross-linking of transmembrane helices in proton-translocating nicotinamide nucleotide transhydrogenase from Escherichia coli: implications for the structure and function of the membrane domain

Proton-pumping nicotinamide nucleotide transhydrogenase from Escherichia coli contains an alpha and a beta subunit of 54 and 49 kDa, respectively, and is made up of three domains. Domain I (dI) and III (dIII) are hydrophilic and contain the NAD(H)- and NADP(H)-binding sites, respectively, whereas the hydrophobic domain II (dII) contains 13 transmembrane alpha-helices and harbours the proton channel. Using a cysteine-free transhydrogenase, the organization of dII and helix-helix distances were investigated by the introduction of one or two cysteines in helix-helix loops on the periplasmic side. Mutants were subsequently cross-linked in the absence and presence of diamide and the bifunctional maleimide cross-linker o-PDM (6 A), and visualized by SDS-PAGE. In the alpha(2)beta(2) tetramer, alphabeta cross-links were obtained with the alphaG476C-betaS2C, alphaG476C-betaT54C and alphaG476C-betaS183C double mutants. Significant alphaalpha cross-links were obtained with the alphaG476C single mutant in the loop connecting helix 3 and 4, whereas betabeta cross-links were obtained with the betaS2C, betaT54C and betaS183C single mutants in the beginning of helix 6, the loop between helix 7 and 8 and the loop connecting helix 11 and 12, respectively. In a model based on 13 mutants, the interface between the alpha and beta subunits in the dimer is lined along an axis formed by helices 3 and 4 from the alpha subunit and helices 6, 7 and 8 from the beta subunit. In addition, helices 2 and 4 in the alpha subunit together with helices 6 and 12 in the beta subunit interact with their counterparts in the alpha(2)beta(2) tetramer. Each beta subunit in the alpha(2)beta(2) tetramer was concluded to contain a proton channel composed of the highly conserved helices 9, 10, 13 and 14.     

Multiple replacements at position 211 in the alpha subunit of tryptophan synthase as a probe of the folding unit association reaction

Equilibrium and kinetic studies on the folding of a series of amino acid replacements at position 211 in the alpha subunit of tryptophan synthase from Escherichia coli were performed in order to determine the role of this position in the rate-limiting step in folding. Previous studies [Beasty, A. M., Hurle, M. R., Manz, J. T., Stackhouse, T., Onuffer, J. J., & Matthews, C. R. (1986) Biochemistry 25, 2965-2974] have shown that the rate-limiting step corresponds to the association/dissociation of the amino (residues 1-188) and carboxy (residues 189-268) folding units. In terms of the secondary structure, the amino folding unit consists of the first six strands and five alpha helices of this alpha/beta barrel protein. The carboxy folding unit comprises the remaining two strands and three alpha helices; position 211 is in strand 7. Replacement of the wild-type glycine at position 211 with serine, valine, and tryptophan at most alters the rate of dissociation of the folding units; association is not changed significantly. In contrast, glutamic acid and arginine dramatically decelerate and accelerate, respectively, both association and dissociation. The difference in effects is attributed to long-range electrostatic interactions for these charged side chains; steric effects and/or hydrogen bonding play lesser roles. When considered with previous data on replacements at other positions in the alpha subunit [Hurle, M. R., Tweedy, N. B., & Matthews, C. R. (1986) Biochemistry 25, 6356-6360], it is clear that beta strands 6 (in the amino folding unit) and 7 (in the carboxy folding unit and containing position 211) dock late in the folding process.     

Critical amino acid residues of the alpha4 subunit for alpha4beta7 integrin function

A characteristic feature of integrin-ligand interactions is the requirement for divalent cations. Putative cation binding sites have been identified in the alpha and beta subunit of the alpha4 integrins, alpha4beta1 and alpha4beta7, and within their ligands which display the tripeptide LDV in fibronectin and homologous motifs in VCAM-1 and MAdCAM-1. The extracellular domain of the murine and human alpha4-subunit contains three conserved LDV motifs, designated LDV-1 to -3. Using site directed mutagenesis and transfection studies, we now examined the functional relevance of the LDV motifs for alpha4beta7 integrins. We present evidence that LDV-1 mutants (D489N) behave like alpha4 wt cells, but LDV-3 mutants (D811N) are impaired in alpha4beta7 integrin-triggered homotypic cell aggregation and in adhesion and spreading on alpha4 specific ligands. Further characterization of LDV-3 mutants revealed a defect in mAb-induced alpha4beta7-cell surface cluster formation. Mutation of the LDV-2 motif (D698N) caused loss of alpha4beta7 integrin cell surface expression. Our results indicate: (i) that LDV-3, located proximal to the cell membrane, is important for alpha4beta7 integrin-triggered functions and for lateral clustering and (ii) that LDV-2 affects alpha4beta7 heterodimer stability.     

Mapping the binding domains of the alpha(IIb) subunit. A study performed on the activated form of the platelet integrin alpha(IIb)beta(3).

alpha(IIb)beta(3), a member of the integrin family of adhesive protein receptors, is the most abundant glycoprotein on platelet plasma-membranes and binds to adhesive proteins via the recognition of short amino acid sequences, for example the ubiquitous RGD motif. However, elucidation of the ligand-binding domains of the receptor remains controversial, mainly owing to the fact that integrins are conformationally labile during purification and storage. In this study, a detailed mapping of the extracellular region of the alpha(IIb) subunit is presented, using overlapping 20-peptides, in order to identify the binding sites of alpha(IIb) potentially involved in the platelet-aggregation event. Regions alpha(IIb) 313-332, alpha(IIb) 265-284 and alpha(IIb) 57-64 of alpha(IIb)beta(3) were identified as putative fibrinogen-binding domains because the corresponding peptides inhibited platelet aggregation and antagonized fibrinogen association, possibly by interacting with this ligand. The latter is further supported by the finding that the above peptides did not interfere with the binding of PAC-1 to the activated form of alpha(IIb)beta(3). Furthermore, alpha(IIb) 313-332 was found to bind to fibrinogen in a solid-phase binding assay. It should be emphasized that all the experiments in this study were carried out on activated platelets and consequently on the activated form of this integrin receptor. We hypothesize that RAD and RAE adhesive motifs, encompassed in alpha(IIb) 313-332, 265-284 and 57-64, are capable of recognizing complementary domains of fibrinogen, thus inhibiting the binding of this ligand to platelets.     

Inhibition of protein interactions with the beta 2 sliding clamp of Escherichia coli DNA polymerase III by peptides from beta 2-binding proteins

The sliding clamp of the Escherichia coli replisome is now understood to interact with many proteins involved in DNA synthesis and repair. A universal interaction motif is proposed to be one mechanism by which those proteins bind the E. coli sliding clamp, a homodimer of the beta subunit, at a single site on the dimer. The numerous beta(2)-binding proteins have various versions of the consensus interaction motif, including a related hexameric sequence. To determine if the variants of the motif could contribute to the competition of the beta-binding proteins for the beta(2) site, synthetic peptides derived from the putative beta(2)-binding motifs were assessed for their abilities to inhibit protein-beta(2) interactions, to bind directly to beta(2), and to inhibit DNA synthesis in vitro. A hierarchy emerged, which was consistent with sequence similarity to the pentameric consensus motif, QL(S/D)LF, and peptides containing proposed hexameric motifs were shown to have activities comparable to those containing the consensus sequence. The hierarchy of peptide binding may be indicative of a competitive hierarchy for the binding of proteins to beta(2) in various stages or circumstances of DNA replication and repair.