Functionalization of catalase for a photochemical immobilization on poly(ethylene terephthalate)

The enzyme catalase (EC 1.11.1.6) was covalently immobilized on textile carrier fabrics made of poly(ethylene terephthalate) (PET) by a novel combined wet chemical and photochemical process. The functionalization of catalase with allyl groups succeeds in a wet chemical treatment of the enzyme with allylglycidylether. This modified enzyme was bonded covalently to the textile material by a photochemical immobilization using a monochromatic excimer UV lamp (222 nm). Using this two-step procedure nearly 60 mg enzyme/g carrier could be fixed durably. The efficiency of the immobilization products was investigated by measuring the enzymatic decomposition of hydrogen peroxide in comparison to the free enzyme. The relative activity of the catalase after the immobilization was nearly 5% compared to the free, not fixed enzyme; however, even after 30 reuses, the modified and immobilized catalase still showed a distinct activity.     

双醛淀粉柔性固定木瓜蛋白酶研究

提出“柔性固定化酶”的模型,即：用一亲水、柔性高分子链接枝于载体表面制得柔性固定化载体,再用其以共价键合的方式进行酶的柔性固定化。其特点是：柔性固定可改善因直接固定化及手臂固定化使酶失活的缺陷,并提高固定化酶的自由度;如选用粒径单分散微球可改善固定化反应及固定化酶催化反应的均一性。以双醛淀粉(DAS)为柔性链对羧基化聚苯乙烯载体进行柔性化修饰后,固定木瓜蛋白酶,其活力回收率可达50％．相当于用戊二醛进行手臂固定化的活力回收率的2倍。     

Immobilization of Penicillium vitale Pidopl. et Bilai catalase by inorganic carriers

An efficient method is developed for P. vitale catalase immobilization through the oxidized carbohydrate enzyme component, using silochrome. The method provides the enzyme binding without losing its catalytic capacity in the immobilized preparation. When the enzyme is immobilized by high-dispersed silica containing isocyanate, aldehyde groups or active atoms of chlorine, 8, 15, and 20 mg of the enzyme is bounded per 1 g of the carrier, respectively, its catalytic capacity being completely retained. A dependence is established for the degree of catalase bonding and catalytic capacity of the immobilized enzyme of the enzyme carrier ratio in immobilization. The catalytic activity of the immobilized catalase preparations reaches 2 000 Becker units/l g. The preparations are stable in storage. Some of their properties are studied.     

Polyvinylamine‐coated polyester fibers as a carrier matrix for the immobilization of peroxidases

Biocatalytic transformations that employ immobilized enzymes become increasingly important for industrial applications. Synthetic or natural textile fiber materials such as polyester, polyamide or viscose are support materials that are comparatively inexpensive. Contrary to traditional support materials, their flexibility enables their use in reactors of any geometry and a fast and residue‐free removal from batch reactors. In this study a permanently immobilized peroxidase (Baylase®) has been investigated on polyester felt as a solid support as a new heterogeneous catalyst system. The polyester felt was functionalized by coating with polyvinylamine and subsequent activation with glutaraldehyde as a crosslinking agent. The enzyme load on the textile surface, the activity of the immobilized protein after repeated use as well as the storage stability was evaluated. Scanning electron micrographs and UV Vis spectroscopy made it possible to verify the enzyme immobilization on the textile surface. Furthermore, the load of immobilized peroxidase was determined by ICP OE spectrometry to be 9–12 mg per gram of textile. The activity of immobilized Baylase® remained high over 35 reaction cycles and a storage period of 8 weeks.     

Immobilization of catalase on cotton fabric oxidized by sodium periodate

Cotton fabric was first oxidized with sodium periodate, and then employed to immobilize catalase. Optimization studies for oxidation of the fabric and immobilization of the enzyme were performed. The properties of the immobilized catalase were examined and compared with those of the free enzyme. A high activity of the immobilized enzyme was obtained when the fabric was oxidized at 40°C and pH 6.0 for 8h in a bath containing 0.20 mol L^?1 sodium periodate and the enzyme was immobilized at 4°C for 24h with a catalase dosage of 120.0 U mL^?1. The immobilized enzyme exhibited optimum activity at 40°C, while the free enzyme had optimal temperature of 30°C, suggesting that the immobilized catalase could be used in a broader temperature range. Both the immobilized and free enzyme had pH optima of 7.0. The staining test and reusability showed that the catalase was fixed covalently on the oxidized cotton fabric.     

铜金属螯合载体固定糖化酶

[目的]制备出含Cu2+的琼脂糖-IDA螯合载体及对其固定糖化酶工艺条件进行优化.[方法]利用金属螯合配体(IDA-Cu2+)与蛋白质表面供电子氨基酸相互作用的原理制备载体,采用紫外分光光度法测定不同影响因素下固定化糖化酶的酶活.[结果]Cu2+的加入量和固定化过程的酸度比给酶量对固定化糖化酶的活性影响还要大,在给酶量80 mg/g载体、1.0× 10-2 mol Cu2+/g载体、pH 4.6和固定化4h的固定化条件下,固定化酶活为252.1 U/g,重复使用5次后酶活为首次固定化酶活的65.1％.[结论]该Cu2+-IDA-金属螯合琼脂糖可用于淀粉水解糖化酶的优良固定化载体材料.     

Enzyme stabilization by nano/microsized hybrid materials

Immobilization is a key technology for successful realization of enzyme‐based industrial processes, particularly for production of green and sustainable energy or chemicals from biomass‐derived catalytic conversion. Different methods to immobilize enzymes are critically reviewed. In principle, enzymes are immobilized via three major routes (i) binding to a support, (ii) encapsulation or entrapment, or (iii) cross‐linking (carrier free). As a result, immobilizing enzymes on certain supports can enhance storage and operational stability. In addition, recent breakthroughs in nano and hybrid technology have made various materials more affordable hosts for enzyme immobilization. This review discusses different approaches to improve enzyme stability in various materials such as nanoparticles, nanofibers, mesoporous materials, sol–gel silica, and alginate‐based microspheres. The advantages of stabilized enzyme systems are from its simple separation and ease recovery for reuse, while maintaining activity and selectivity. This review also considers the latest studies conducted on different enzymes immobilized on various support materials with immense potential for biosensor, antibiotic production, food industry, biodiesel production, and bioremediation, because stabilized enzyme systems are expected to be environmental friendly, inexpensive, and easy to use for enzyme‐based industrial applications.     

烟草多酚氧化酶的分离与固定化技术研究

多酚氧化酶属于氧化还原酶类,国际酶学委员会推荐名为儿茶酚氧化酶（ＥＣ１．１０．３．１ｐｏｌｙｐｈｅｎｏｌｏｘｉｄａｓｅ,ＰＰＯ）．该酶与食品工业、三废处理、医药卫生关系较为密切,因而研究较多．如近年来鸭梨［１］、蘑菇［２］、香蕉果肉组织［３］、荔枝果皮［４］等等中的多酚氧化酶均有研究报道．目前研究用固定化多酚氧化酶检测废水中酚类物质含量,进行环境检测;及其从工业废水中除去酚类,达到治理三废的目的．Ｍｏｓｂａｃｎ［５］（１９７６）研制成多酚氧化酶固定化酶柱,与氧电极检测器组合联用,可检测水中２０…     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.     

Immobilization of Papain on the Mesoporous Molecular Sieve MCM‐48

The immobilization of papain on the mesoporous molecular sieve MCM‐48 (with a pore size of 6.2 nm in diameter) with the aid of glutaraldehyde, and the characteristics of this immobilized papain are described. The optimum conditions for immobilization were as follows: 20 mg native free enzyme/g of the MCM‐48 and 0.75 % glutaraldehyde, 2 h at 10–20 °C and pH 7.0. Under these optimum conditions for immobilization, the activity yield [%] of the immobilized enzyme was around 70 %. The influence of the pH on the activity of the immobilized enzyme was much lower compared to the free enzyme. The thermostability of the immobilized enzyme, whose half‐life was more than 2500 min, was greatly improved and was found to be significantly higher than that of the free enzyme (about 80 min). The immobilized enzyme also showed good operational stability, and the activity of the immobilized enzyme continued to maintain 76.5 % of the initial activity even after a 12‐day continuous operation. Moreover, the immobilized enzyme still exhibited good storage stability. From these results, papain immobilized on the MCM‐48 with the aid of glutaraldehyde, can be used as a high‐performance biocatalyst in biotechnological processing, in particular in industrial and medical applications.     

Thermo-alkali-stable catalases from newly isolated Bacillus sp. for the treatment and recycling of textile bleaching effluents

Three thermoalkaliphilic bacteria, which were grown at pH 9.3–10 and 60–65 °C were isolated out of a textile wastewater drain. The unknown micro-organisms were identified as thermoalkaliphilic Bacillus sp. Growth conditions were studied and catalase activities and stabilities compared. Catalases from Bacillus SF showed high stabilities at 60 °C and pH 9 (t_1/2=38 h) and thus this strain was chosen for further investigations, such as electron microscopy, immobilization of catalase and hydrogen peroxide degradation studies. Degradation of hydrogen peroxide with an immobilized catalase from Bacillus SF enabled the reuse of the water for the dyeing process. In contrast, application of the free enzyme for treatment of bleaching effluents, caused interaction between the denaturated protein and the dye, resulting in reduced dye uptake, and a higher color difference of 1.3 ΔE* of dyed fabrics compared to 0.9 ΔE* when using the immobilized enzyme.     

Antibacterial functionalization of wool fabric via immobilizing lysozymes

Greater attention has been given to enzymatic processes of textiles as effective alternatives to conventional chemical treatments because of the non-toxic and eco-friendly characteristics of enzymes as well as the increasingly important requirement for reducing pollution in textile production. A new functionalization method for wool fabrics based on immobilization of lysozymes was investigated in this paper. Wool fabric was first activated with glutaraldehyde, and then employed to covalently immobilize lysozymes. Main immobilization parameters were optimized in terms of the activity of immobilized enzyme. A high activity of the immobilized enzyme was obtained when the fabric was activated at 25 °C for 6 h in a bath containing with 0.2% of glutaraldehyde followed by the immobilization at 4 °C and pH 7.0 for 6 h with 5 g l⁻¹ lysozyme. The scanning electron microscopy and staining tests based on modified Coomassie protein assay (Bradford method) revealed that the lysozyme was fixed covalently on the wool fabric. Wool fabrics immobilizing lysozymes presented a higher ratio of bacteriostasis to Staphylococcus aureus. The durability of antibacterial wool was assessed and the lysozyme immobilized on wool fabric retained ca. 43% of its activity after five cycles of use when taking the activity of the immobilized lysozyme before using as reference.     

环氧交联剂和氨基载体固定化海洋假丝酵母脂肪酶*

游离酶经过固定化后,稳定性和环境耐受性得到提高,在食品、医药、化工、环境和皮革等领域可以很好的提高酶的利用率并降低生产成本,具有极大的应用潜力。新型交联剂在固定化酶工艺的应用极大推进了固定化酶研究的深入。借助新型交联剂聚乙二醇二缩水甘油醚(PEGDGE),利用氨基载体LX-1000HA固定化海洋假丝酵母脂肪酶,结合单因素和正交试验优化得到交联及固定化条件为:交联温度30℃,交联2h,交联剂浓度0.75%,pH7.0,加酶量800U,载体量0.5g,固定化2h,固定化温度45℃。根据上述最佳固定化工艺,制备得到固定化酶LX-1000HA-PEGDGE-CRL在最适条件下测得酶活达到160.81U/g,约为此前制备的固定化酶LX-1000HA-GA-CRL(由LX-1000HA和戊二醛交联脂肪酶得到)和LX-1000EA-PEGDGE-CRL(由短链氨基载体LX-1000EA和PEGDGE交联脂肪酶得到)酶活的2倍,发现固定化酶LX-1000HA-PEGDGE-CRL的最适反应温度相比于游离酶提高15℃;在70℃的环境中3h后酶活仍存留70%;循环使用6次后残留65%左右的酶活;酸碱耐受性和储存稳定性也表现良好,4℃保存30天后剩余约70%的初始酶活。同时,将制备的固定化酶LX-1000HA-PEGDGE-CRL与游离酶、固定化酶LX-1000HA-GA-CRL、固定化酶LX-1000EA-PEGDGE-CRL进行了比较,发现固定化酶LX-1000HA-PEGDGE-CRL在温度耐受性和重复使用性等方面具有更好的使用效果。     

壳聚糖固定化琼脂酶的研究

采用壳聚糖微球对琼脂酶进行固定化,在单因素实验的基础上用正交试验法确定最佳固定化工艺。结果表明:在戊二醛体积分数为2.5%,交联时间为6 h,加酶量为15 mL,固定时间为3 h时固定酶的活力最高;固定化酶的最适反应温度及最适pH分别为50℃和8.5,高于游离酶;同时其热稳定性及操作稳定性均高于游离酶。     

以Fe(III) 改性胶原纤维为载体固定过氧化氢酶

将胶原纤维用三价铁改性后作为载体,通过戊二醛的交联作用将过氧化氢酶固定在该载体上。制备的固定化过氧化氢酶蛋白固载量为16.7 mg/g,酶活收率为35％。研究了固定化酶与自由酶的最适pH、最适温度、热稳定性、贮存稳定性及操作稳定性。结果表明：过氧化氢酶经此法固定化后,最适pH及最适温度与自由酶相同,分别为pH 7.0和25 ℃;但固定化酶的热稳定性显著提高,在75 ℃保存5 h后,仍能保留30％的活力,而自由酶则完全失活;固定化酶在室温下保存12 d后,酶活力仍保持在88％以上,而自由酶在此条件下则完全失     

吸附-交联法固定D-泛解酸内酯水解酶的研究

选择6种吸附树脂和离子交换树脂对D-泛解酸内酯水解酶进行固定化,筛选出了固定化效果较好的大孔弱碱性丙烯酸系阴离子交换树脂D-380为载体,用先吸附后交联的方法固定化。通过实验对固定化条件进行了优化,得出最佳的固定化条件为：加酶量6U／g树脂、吸附pH7．5、吸附时间4h、吸附温度30℃、交联剂戊二醛终浓度0．1％、交联时间2h。实验表明在此条件下制得的固定化酶有很好的稳定性：固定化酶在连续20次的底物水解反应后,剩余酶活达到71％。当温度达到80℃时游离酶几乎失去酶活,而固定化酶剩余酶活为60％以上。游离酶的pH稳定性范围为pH7～8,而固定化酶为pH6．5～8．5。     

Reversible immobilization of catalase on fibrous polymer grafted and metal chelated chitosan membrane

Poly(itaconic acid) grafted and/or Fe(III) ions incorporated chitosan membranes were used for reversible immobilization of catalase (from bovine liver) via adsorption. The influences of pH and initial catalase concentration on the immobilization capacities of the CH-g-poly(IA) and CH-g-poly(IA)-Fe(III) membranes have been investigated in a batch system. Maximum catalase adsorption onto CH-g-poly(IA) and CH-g-poly(IA)-Fe(III) membrane were found to be 6.3 and 37.8 mg/g polymer at pH 5.0 and 6.5, respectively. The CH-g-poly(IA)-Fe(III) membrane with high catalase adsorption capacity was used in the rest of the study. The K_m value for immobilized catalase on CH-g-poly(IA)-Fe(III) (25.8 mM) was higher about 1.6-fold than that of free enzyme (13.5 mM). Optimum operational temperature was observed at 40 °C, a 5 °C higher than that of the free enzyme and was significantly broader. The optimum operational pH was same for both free and immobilized catalase (pH 7.0). Thermal stability was found to increase with immobilization. Free catalase lost all its activity within 20 days whereas immobilized catalase lost 23% of its activity during the same incubation period. It was observed that the same support enzyme can be repeatedly used for immobilization of catalase after regeneration without significant loss in adsorption capacity or enzyme activity. In addition, the CH-g-poly(IA)-Fe(III) membrane prepared in this work showed promising potential for various biotechnological applications.     

DA-F127水凝胶包埋固定化含腈水合酶细胞

腈水合酶是一类可催化腈类化合物转化生成相应酰胺类物质的酶。含腈水合酶的游离细胞催化水合反应存在酶容易失活、细胞无法重复利用、分离纯化困难等缺陷,细胞固定化技术可有效解决这些问题。为探索合适的固定化方法,以含腈水合酶的重组E.coli细胞为研究对象,以固定化酶活回收率和批次反应情况为评价指标,筛选比较了几种常用的包埋固定化方法。结果表明,DA-F127水凝胶包埋固定化细胞不仅具有较高的酶活回收率,而且稳定性也很好。对该方法进行了固定化条件和操作稳定性优化,当DA-F127浓度为15%、UV光源距离为20cm、光照时间为6min、菌体含量为20mg/g 固定化细胞时,酶活回收率为89.74%,并且可以催化9批次150g/L的3-氰基吡啶完成转化,第九批次转化率可达98.26%。与游离细胞催化过程相比,单位质量游离细胞的烟酰胺产量提高了12倍,具有良好的工业应用前景。     

Immobilization of glucose oxidase on polymer membranes treated by low-temperature plasma

Low-temperature plasma was employed for activation of polymer membranes as a carrier for enzyme immobilization. Glucose oxidase was immobilized on polypropylene (PP), polyvinylidene fluoride (PVDF), or polytetrafluoroethylene (PTFE) membrane surfaces treated by nitrogen or ammonia gas plasma using glutaraldehyde as a linking agent. Enzyme activity was evaluated by the response of glucose sensor composed of the immobilized enzyme membrane and a dissolved oxygen electrode. The sensor response was found to depend on the kind of carrier membrane and to become maximum at suitable conditions of plasma treatment.     

Thermo-alkali-stable catalases from newly isolated Bacillus sp. for the treatment and recycling of textile bleaching effluents

Three thermoalkaliphilic bacteria, which were grown at pH 9.3–10 and 60–65 °C were isolated out of a textile wastewater drain. The unknown micro-organisms were identified as thermoalkaliphilic Bacillus sp. Growth conditions were studied and catalase activities and stabilities compared. Catalases from Bacillus SF showed high stabilities at 60 °C and pH 9 (t_1/2=38 h) and thus this strain was chosen for further investigations, such as electron microscopy, immobilization of catalase and hydrogen peroxide degradation studies. Degradation of hydrogen peroxide with an immobilized catalase from Bacillus SF enabled the reuse of the water for the dyeing process. In contrast, application of the free enzyme for treatment of bleaching effluents, caused interaction between the denaturated protein and the dye, resulting in reduced dye uptake, and a higher color difference of 1.3 ΔE* of dyed fabrics compared to 0.9 ΔE* when using the immobilized enzyme.