Disassembly of Escherichia coli RecA E38K/��C17 Nucleoprotein Filaments Is Required to Complete DNA Strand Exchange

Disassembly of RecA protein subunits from a RecA filament has long been known to occur during DNA strand exchange, although its importance to this process has been controversial. An Escherichia coli RecA E38K/ΔC17 double mutant protein displays a unique and pH-dependent mutational separation of DNA pairing and extended DNA strand exchange. Single strand DNA-dependent ATP hydrolysis is catalyzed by this mutant protein nearly normally from pH 6 to 8.5. It will also form filaments on DNA and promote DNA pairing. However, below pH 7.3, ATP hydrolysis is completely uncoupled from extended DNA strand exchange. The products of extended DNA strand exchange do not form. At the lower pH values, disassembly of RecA E38K/ΔC17 filaments is strongly suppressed, even when homologous DNAs are paired and available for extended DNA strand exchange. Disassembly of RecA E38K/ΔC17 filaments improves at pH 8.5, whereas complete DNA strand exchange is also restored. Under these sets of conditions, a tight correlation between filament disassembly and completion of DNA strand exchange is observed. This correlation provides evidence that RecA filament disassembly plays a major role in, and may be required for, DNA strand exchange. A requirement for RecA filament disassembly in DNA strand exchange has a variety of ramifications for the current models linking ATP hydrolysis to DNA strand exchange.     

Structure of helical RecA-DNA complexes. II. Local conformational changes visualized in bundles of RecA-ATP gamma S filaments

Complexes of RecA-DNA filaments, formed in the presence of a non-hydrolyzable ATP analog, ATP gamma S, aggregate together into regular bundles in the presence of Mg2+. Electron micrographs of several different forms of RecA-double-stranded DNA bundles have been analyzed: bundles of six supercoiled filaments at two different concentrations of Mg2+, and bundles of three supercoiled filaments at a single concentration of Mg2+. The bundles are all characterized by a regular left-handed supercoiling of the component filaments arising from the non-integral number of RecA subunits per turn of the RecA helix in these aggregates, about 6.15 units/turn. When single-stranded DNA is used instead of double-stranded DNA, regular aggregates composed of many filaments are formed. These aggregates do not supercoil, consistent with a symmetry of the component filaments of close to 6.0 units/turn. These different structures have provided a strong confirmation of the analysis of isolated RecA filaments. Since different RecA protomers within the component filaments of these aggregates are in different environments, they have provided a direct view of different conformations that RecA subunits may adopt within the same filament as a result of nonequivalent contacts. The conformational changes we have visualized are quite large, with apparent movements of mass over distances greater than 2 nm. The RecA-mediated strand exchange reaction is a highly dynamic process, which involves both the unwinding and stretching of DNA, in addition to the physical movement of DNA strands. It is quite likely, therefore, that the different conformations of RecA subunits seen in these aggregates represent different states of RecA during its enzymatic strand exchange activity.     

Organized unidirectional waves of ATP hydrolysis within a RecA filament

The RecA protein forms nucleoprotein filaments on DNA, and individual monomers within the filaments hydrolyze ATP. Assembly and disassembly of filaments are both unidirectional, occurring on opposite filament ends, with disassembly requiring ATP hydrolysis. When filaments form on duplex DNA, RecA protein exhibits a functional state comparable to the state observed during active DNA strand exchange. RecA filament state was monitored with a coupled spectrophotometric assay for ATP hydrolysis, with changes fit to a mathematical model for filament disassembly. At 37 °C, monomers within the RecA-double-stranded DNA (dsDNA) filaments hydrolyze ATP with an observed k_cat of 20.8 ± 1.5 min⁻¹. Under the same conditions, the rate of end-dependent filament disassembly (k_off) is 123 ± 16 monomers per minute per filament end. This rate of disassembly requires a tight coupling of the ATP hydrolytic cycles of adjacent RecA monomers. The relationship of k_cat to k_off infers a filament state in which waves of ATP hydrolysis move unidirectionally through RecA filaments on dsDNA, with successive waves occurring at intervals of approximately six monomers. The waves move nearly synchronously, each one transiting from one monomer to the next every 0.5 s. The results reflect an organization of the ATPase activity that is unique in filamentous systems, and could be linked to a RecA motor function.     

The DinI protein stabilizes RecA protein filaments

When DinI is present at concentrations that are stoichiometric with those of RecA or somewhat greater, DinI has a substantial stabilizing effect on RecA filaments bound to DNA. Exchange of RecA between free and bound forms was almost entirely suppressed, and highly stable filaments were documented with several different experimental methods. DinI-mediated stabilization did not affect RecA-mediated ATP hydrolysis and LexA co-protease activities. Initiation of DNA strand exchange was affected in a DNA structure-dependent manner, whereas ongoing strand exchange was not affected. Destabilization of RecA filaments occurred as reported in earlier work but only when DinI protein was present at very high concentrations, generally superstoichiometric, relative to the RecA protein concentration. DinI did not facilitate RecA filament formation but stabilized the filaments only after they were formed. The interaction between the RecA protein and DinI was modulated by the C terminus of RecA. We discuss these results in the context of a new hypothesis for the role of DinI in the regulation of recombination and the SOS response.     

Modeling the early stage of DNA sequence recognition within RecA nucleoprotein filaments

Homologous recombination is a fundamental process enabling the repair of double-strand breaks with a high degree of fidelity. In prokaryotes, it is carried out by RecA nucleofilaments formed on single-stranded DNA (ssDNA). These filaments incorporate genomic sequences that are homologous to the ssDNA and exchange the homologous strands. Due to the highly dynamic character of this process and its rapid propagation along the filament, the sequence recognition and strand exchange mechanism remains unknown at the structural level. The recently published structure of the RecA/DNA filament active for recombination (Chen et al., Mechanism of homologous recombination from the RecA-ssDNA/dsDNA structure, Nature 2008, 453, 489) provides a starting point for new exploration of the system. Here, we investigate the possible geometries of association of the early encounter complex between RecA/ssDNA filament and double-stranded DNA (dsDNA). Due to the huge size of the system and its dense packing, we use a reduced representation for protein and DNA together with state-of-the-art molecular modeling methods, including systematic docking and virtual reality simulations. The results indicate that it is possible for the double-stranded DNA to access the RecA-bound ssDNA while initially retaining its Watson–Crick pairing. They emphasize the importance of RecA L2 loop mobility for both recognition and strand exchange.     

RecA dimers serve as a functional unit for assembly of active nucleoprotein filaments

All RecA-like recombinase enzymes catalyze DNA strand exchange as elongated filaments on DNA. Despite numerous biochemical and structural studies of RecA and the related Rad51 and RadA proteins, the unit oligomer(s) responsible for nucleoprotein filament assembly and coordinated filament activity remains undefined. We have created a RecA fused dimer protein and show that it maintains in vivo DNA repair and LexA co-protease activities, as well as in vitro ATPase and DNA strand exchange activities. Our results support the idea that dimeric RecA is an important functional unit both for assembly of nucleoprotein filaments and for their coordinated activity during the catalysis of homologous recombination.     

Assembly and disassembly of RecA protein filaments occur at opposite filament ends. Relationship to DNA strand exchange

RecA protein primarily associates with and dissociates from opposite ends of nucleoprotein filaments formed on linear duplex DNA. RecA nucleoprotein filaments that are hydrolyzing ATP therefore engage in a dynamic process under some conditions that has some of the properties of treadmilling. We have also investigated whether the net polymerization of recA protein at one end of the filament and/or a net depolymerization at the other end drives unidirectional strand exchange. There is no demonstrable correlation between recA protein association/dissociation and the strand exchange reaction. RecA protein-mediated DNA strand exchange is affected minimally by changes in reaction conditions (dilution, pH shift, or addition of small amounts of adenosine-5'-O-(3-thiotriphosphate) that have large and demonstrable effects on recA protein association, dissociation, or both. Rather than driving strand exchange, these assembly and disassembly processes may simply represent the mechanism by which recA nucleoprotein filaments are recycled in the cell.     

Developing Single-Molecule TPM Experiments for Direct Observation of Successful RecA-Mediated Strand Exchange Reaction

RecA recombinases play a central role in homologous recombination. Once assembled on single-stranded (ss) DNA, RecA nucleoprotein filaments mediate the pairing of homologous DNA sequences and strand exchange processes. We have designed two experiments based on tethered particle motion (TPM) to investigate the fates of the invading and the outgoing strands during E. coli RecA-mediated pairing and strand exchange at the single-molecule level in the absence of force. TPM experiments measure the tethered bead Brownian motion indicative of the DNA tether length change resulting from RecA binding and dissociation. Experiments with beads labeled on either the invading strand or the outgoing strand showed that DNA pairing and strand exchange occurs successfully in the presence of either ATP or its non-hydrolyzable analog, ATPγS. The strand exchange rates and efficiencies are similar under both ATP and ATPγS conditions. In addition, the Brownian motion time-courses suggest that the strand exchange process progresses uni-directionally in the 5′-to-3′ fashion, using a synapse segment with a wide and continuous size distribution.     

Changes in the tension in dsDNA alter the conformation of RecA bound to dsDNA�CRecA filaments

The RecA protein is an ATPase that mediates recombination via strand exchange. In strand exchange a single-stranded DNA (ssDNA) bound to RecA binding site I in a RecA/ssDNA filament pairs with one strand of a double-stranded DNA (dsDNA) and forms heteroduplex dsDNA in site I if homology is encountered. Long sequences are exchanged in a dynamic process in which initially unbound dsDNA binds to the leading end of a RecA/ssDNA filament, while heteroduplex dsDNA unbinds from the lagging end via ATP hydrolysis. ATP hydrolysis is required to convert the active RecA conformation, which cannot unbind, to the inactive conformation, which can unbind. If dsDNA extension due to RecA binding increases the dsDNA tension, then RecA unbinding must decrease tension. We show that in the presence of ATP hydrolysis decreases in tension induce decreases in length whereas in the absence of hydrolysis, changes in tension have no systematic effect. These results suggest that decreases in force enhance dissociation by promoting transitions from the active to the inactive RecA conformation. In contrast, increases in tension reduce dissociation. Thus, the changes in tension inherent to strand exchange may couple with ATP hydrolysis to increase the directionality and stringency of strand exchange.     

Coordination and internal exchange of two DNA molecules in a RecA filament in the presence of hydrolysing ATP. Information on ATP-RecA-DNA structure from linear dichroism spectroscopy.

Solution structure of complexes between DNA and recombinase RecA from Escherchia coli, in the presence of the physiological cofactor ATP, is probed by flow linear dichroism (LD) spectroscopy. A problem of ADP accumulation which promotes dissociation of DNA-RecA is circumvented by using an ATP-regenerating system. The LD features indicate that the local structure of the complex is very similar to that found in the presence of the non-hydrolysable analog of ATP, adenosine-5'-O-[gamma-thio]triphosphate (ATP[gamma S]); the DNA bases are oriented with their planes preferentially perpendicular to the long axis of the filament, while the indole chromophores of the two tryptophan residues of RecA are rather parallel to this reference direction. A much smaller overall amplitude of the LD spectrum, compared to ATP[gamma S], is interpreted as a result of fast dissociation of RecA due to hydrolysis of ATP, producing transiently naked DNA regions which act like flexible joints, diminishing the macroscopic orientation of the RecA filaments. However, the ATP hydrolysis is not found to prevent simultaneous accommodation of two non-complementary DNA molecules in the RecA complex, as judged from the LD behaviour upon successive addition of two different polynucleotides or modified DNA strands. A notable difference from corresponding complexes formed with ATP[gamma S] is that, in the presence of ATP hydrolysis, the order in which the two DNA molecules have been added is insignificant as judged from virtually identical resulting structures; this observation indicates that exchange of DNA occurs between the two DNA accommodation sites within the RecA filament.     

Roles of Bacillus subtilis DprA and SsbA in RecA-mediated Genetic Recombination

Bacillus subtilis competence-induced RecA, SsbA, SsbB, and DprA are required to internalize and to recombine single-stranded (ss) DNA with homologous resident duplex. RecA, in the ATP·Mg²⁺-bound form (RecA·ATP), can nucleate and form filament onto ssDNA but is inactive to catalyze DNA recombination. We report that SsbA or SsbB bound to ssDNA blocks the RecA filament formation and fails to activate recombination. DprA facilitates RecA filamentation; however, the filaments cannot engage in DNA recombination. When ssDNA was preincubated with SsbA, but not SsbB, DprA was able to activate DNA strand exchange dependent on RecA·ATP. This work demonstrates that RecA·ATP, in concert with SsbA and DprA, catalyzes DNA strand exchange, and SsbB is an accessory factor in the reaction. In contrast, RecA·dATP efficiently catalyzes strand exchange even in the absence of single-stranded binding proteins or DprA, and addition of the accessory factors marginally improved it. We proposed that the RecA-bound nucleotide (ATP and to a lesser extent dATP) might dictate the requirement for accessory factors.     

Regulation of DNA strand exchange in homologous recombination

Homologous recombination, the exchange of DNA strands between homologous DNA molecules, is involved in repair of many structural diverse DNA lesions. This versatility stems from multiple ways in which homologous DNA strands can be rearranged. At the core of homologous recombination are recombinase proteins such as RecA and RAD51 that mediate homology recognition and DNA strand exchange through formation of a dynamic nucleoprotein filament. Four stages in the life cycle of nucleoprotein filaments are filament nucleation, filament growth, homologous DNA pairing and strand exchange, and filament dissociation. Progression through this cycle requires a sequence of recombinase-DNA and recombinase protein-protein interactions coupled to ATP binding and hydrolysis. The function of recombinases is controlled by accessory proteins that allow coordination of strand exchange with other steps of homologous recombination and that tailor to the needs of specific aberrant DNA structures undergoing recombination. Accessory proteins are also able to reverse filament formation thereby guarding against inappropriate DNA rearrangements. The dynamic instability of the recombinase-DNA interactions allows both positive and negative action of accessory proteins thereby ensuring that genome maintenance by homologous recombination is not only flexible and versatile, but also accurate.     

A DNA pairing-enhanced conformation of bacterial RecA proteins

The RecA proteins of Escherichia coli (Ec) and Deinococcus radiodurans (Dr) both promote a DNA strand exchange reaction involving two duplex DNAs. The four-strand exchange reaction promoted by the DrRecA protein is similar to that promoted by EcRecA, except that key parts of the reaction are inhibited by Ec single-stranded DNA-binding protein (SSB). In the absence of SSB, the initiation of strand exchange is greatly enhanced by dsDNA-ssDNA junctions at the ends of DNA gaps. This same trend is seen with the EcRecA protein. The results lead to an expansion of published hypotheses for the pathway for RecA-mediated DNA pairing, in which the slow first order step (observed in several studies) involves a structural transition to a state we designate P. The P state is identical to the state found when RecA is bound to double-stranded (ds) DNA. The structural state present when the RecA protein is bound to single-stranded (ss) DNA is designated A. The DNA pairing model in turn facilitates an articulation of three additional conclusions arising from the present work. 1) When a segment of a RecA filament bound to ssDNA is forced into the P state (as RecA bound to the ssDNA immediately adjacent to dsDNA-ssDNA junction), the segment becomes "pairing enhanced." 2) The unusual DNA pairing properties of the D. radiodurans RecA protein can be explained by postulating this protein has a more stringent requirement to initiate DNA strand exchange from the P state. 3) RecA filaments bound to dsDNA (P state) have directly observable structural changes relative to RecA filaments bound to ssDNA (A state), involving the C-terminal domain.     

Bacillus subtilis SsbA and dATP regulate RecA nucleation onto single-stranded DNA

Bacillus subtilis RecA preferentially hydrolyzes dATP over ATP and supports an efficient DNA strand exchange reaction in the presence of dATP when compared to ATP. Saturating amounts of SsbA, independently of the order of addition, reduce the single-stranded (ss) DNA-dependent dATPase activity of RecA, and block the ATPase activity. SsbA added prior to RecA slightly stimulates the dATP-dependent DNA strand exchange activity, whereas added after RecA greatly enhances the extent of strand exchange. In the presence of ATP, 10 times more RecA is required to achieve a comparable level of strand exchange than in the presence of dATP. We propose that dATP binding and hydrolysis as well as SsbA provide different levels of regulation of the dynamic RecA nucleoprotein filament.     

Structural and torsional properties of the RAD51-dsDNA nucleoprotein filament

Human RAD51 is a key protein in the repair of DNA by homologous recombination. Its assembly onto DNA, which induces changes in DNA structure, results in the formation of a nucleoprotein filament that forms the basis of strand exchange. Here, we determine the structural and mechanical properties of RAD51-dsDNA filaments. Our measurements use two recently developed magnetic tweezers assays, freely orbiting magnetic tweezers and magnetic torque tweezers, designed to measure the twist and torque of individual molecules. By directly monitoring changes in DNA twist on RAD51 binding, we determine the unwinding angle per RAD51 monomer to be 45°, in quantitative agreement with that of its bacterial homolog, RecA. Measurements of the torque that is built up when RAD51-dsDNA filaments are twisted show that under conditions that suppress ATP hydrolysis the torsional persistence length of the RAD51-dsDNA filament exceeds that of its RecA counterpart by a factor of three. Examination of the filament’s torsional stiffness for different combinations of divalent ions and nucleotide cofactors reveals that the Ca²⁺ ion, apart from suppressing ATPase activity, plays a key role in increasing the torsional stiffness of the filament. These quantitative measurements of RAD51-imposed DNA distortions and accumulated mechanical stress suggest a finely tuned interplay between chemical and mechanical interactions within the RAD51 nucleoprotein filament.     

Characterization of the DNA binding activity of stable RecA-DNA complexes. Interaction between the two DNA binding sites within RecA helical filaments

The DNA-binding, annealing and recombinational activities of purified RecA-DNA complexes stabilized by ATP gamma S (a slowly hydrolysable analog of ATP) are described. Electrophoretic analysis, DNase protection experiments and observations by electron microscopy suggest that saturated RecA complexes formed with single- or double-stranded DNA are able to accommodate an additional single strand of DNA with a stoichiometry of about one nucleotide of added single-stranded DNA per nucleotide or base-pair, respectively, of DNA resident in the complex. This strand uptake is independent of complementarity or homology between the added and resident DNA molecules. In the complex, the incoming and resident single-stranded DNA molecules are in close proximity as the two strands can anneal in case of their complementarity. Stable RecA complexes formed with single-stranded DNA bind double-stranded DNA efficiently when the added DNA is homologous to the complexed strand and then initiate a strand exchange reaction between the partner DNA molecules. Electron microscopy of the RecA-single-stranded DNA complexes associated with homologous double-stranded DNA suggests that a portion of duplex DNA is taken into the complex and placed in register with the resident single strand. Our experiments indicate that both DNA binding sites within RecA helical filaments can be occupied by either single- or double-stranded DNA. Presumably, the same first DNA binding site is used by RecA during its polymerization on single- or double-stranded DNA and the second DNA binding site becomes available for subsequent interaction of the protein-saturated complexes with naked DNA. The way by which additional DNA is taken into RecA-DNA complexes shows co-operative character and this helps to explain how topological problems are avoided during RecA-mediated homologous recombination.     

RecA Protein from the extremely radioresistant bacterium Deinococcus radiodurans: expression, purification, and characterization

The RecA protein of Deinococcus radiodurans (RecA(Dr)) is essential for the extreme radiation resistance of this organism. The RecA(Dr) protein has been cloned and expressed in Escherichia coli and purified from this host. In some respects, the RecA(Dr) protein and the E. coli RecA (RecA(Ec)) proteins are close functional homologues. RecA(Dr) forms filaments on single-stranded DNA (ssDNA) that are similar to those formed by the RecA(Ec). The RecA(Dr) protein hydrolyzes ATP and dATP and promotes DNA strand exchange reactions. DNA strand exchange is greatly facilitated by the E. coli SSB protein. As is the case with the E. coli RecA protein, the use of dATP as a cofactor permits more facile displacement of bound SSB protein from ssDNA. However, there are important differences as well. The RecA(Dr) protein promotes ATP- and dATP-dependent reactions with distinctly different pH profiles. Although dATP is hydrolyzed at approximately the same rate at pHs 7.5 and 8.1, dATP supports an efficient DNA strand exchange only at pH 8.1. At both pHs, ATP supports efficient DNA strand exchange through heterologous insertions but dATP does not. Thus, dATP enhances the binding of RecA(Dr) protein to ssDNA and the displacement of ssDNA binding protein, but the hydrolysis of dATP is poorly coupled to DNA strand exchange. The RecA(Dr) protein thus may offer new insights into the role of ATP hydrolysis in the DNA strand exchange reactions promoted by the bacterial RecA proteins. In addition, the RecA(Dr) protein binds much better to duplex DNA than the RecA(Ec) protein, binding preferentially to double-stranded DNA (dsDNA) even when ssDNA is present in the solutions. This may be of significance in the pathways for dsDNA break repair in Deinococcus.     

Complexes of RecA with LexA and RecX differentiate between active and inactive RecA nucleoprotein filaments

The bacterial RecA protein has been the dominant model system for understanding homologous genetic recombination. Although a crystal structure of RecA was solved ten years ago, we still do not have a detailed understanding of how the helical filament formed by RecA on DNA catalyzes the recognition of homology and the exchange of strands between two DNA molecules. Recent structural and spectroscopic studies have suggested that subunits in the helical filament formed in the RecA crystal are rotated when compared to the active RecA-ATP-DNA filament. We examine RecA-DNA-ATP filaments complexed with LexA and RecX to shed more light on the active RecA filament. The LexA repressor and RecX, an inhibitor of RecA, both bind within the deep helical groove of the RecA filament. Residues on RecA that interact with LexA cannot be explained by the crystal filament, but can be properly positioned in an existing model for the active filament. We show that the strand exchange activity of RecA, which can be inhibited when RecX is present at very low stoichiometry, is due to RecX forming a block across the deep helical groove of the RecA filament, where strand exchange occurs. It has previously been shown that changes in the nucleotide bound to RecA are associated with large motions of RecA's C-terminal domain. Since RecX binds from the C-terminal domain of one subunit to the nucleotide-binding core of another subunit, a stabilization of RecA's C-terminal domain by RecX can likely explain the inhibition of RecA's ATPase activity by RecX.     

Defective dissociation of a "slow" RecA mutant protein imparts an Escherichia coli growth defect

The RecA and some related proteins possess a simple motif, called (KR)X(KR), that (in RecA) consists of two lysine residues at positions 248 and 250 at the subunit-subunit interface. This study and previous work implicate this RecA motif in the following: (a) catalyzing ATP hydrolysis in trans,(b) coordinating the ATP hydrolytic cycles of adjacent subunits, (c) governing the rate of ATP hydrolysis, and (d) coupling the ATP hydrolysis to work (in this case DNA strand exchange). The conservative K250R mutation leaves RecA nucleoprotein filament formation largely intact. However, ATP hydrolysis is slowed to less than 15% of the wild-type rate. DNA strand exchange is also slowed commensurate with the rate of ATP hydrolysis. The results reinforce the idea of a tight coupling between ATP hydrolysis and DNA strand exchange. When a plasmid-borne RecA K250R protein is expressed in a cell otherwise lacking RecA protein, the growth of the cells is severely curtailed. The slow growth defect is alleviated in cells lacking RecFOR function, suggesting that the defect reflects loading of RecA at stalled replication forks. Suppressors occur as recA gene alterations, and their properties indicate that limited dissociation by RecA K250R confers the slow growth phenotype. Overall, the results suggest that recombinational DNA repair is a common occurrence in cells. RecA protein plays a sufficiently intimate role in the bacterial cell cycle that its properties can limit the growth rate of a bacterial culture.     

Complementation of one RecA protein point mutation by another. Evidence for trans catalysis of ATP hydrolysis

The RecA residues Lys248 and Glu96 are closely opposed across the RecA subunit-subunit interface in some recent models of the RecA nucleoprotein filament. The K248R and E96D single mutant proteins of the Escherichia coli RecA protein each bind to DNA and form nucleoprotein filaments but do not hydrolyze ATP or dATP. A mixture of K248R and E96D single mutant proteins restores dATP hydrolysis to 25% of the wild type rate, with maximum restoration seen when the proteins are present in a 1:1 ratio. The K248R/E96D double mutant RecA protein also hydrolyzes ATP and dATP at rates up to 10-fold higher than either single mutant, although at a reduced rate compared with the wild type protein. Thus, the K248R mutation partially complements the inactive E96D mutation and vice versa. The complementation is not sufficient to allow DNA strand exchange. The K248R and E96D mutations originate from opposite sides of the subunit-subunit interface. The functional complementation suggests that Lys248 plays a significant role in ATP hydrolysis in trans across the subunit-subunit interface in the RecA nucleoprotein filament. This could be part of a mechanism for the long range coordination of hydrolytic cycles between subunits within the RecA filament.