Separation of subpopulations of in vitro colony forming cells from mouse marrow by equilibrium density centrifugation

Equilibrium density centrifugation was used to characterise and separate subpopulations of mouse haemopoietic progenitor cells capable of producing colonies of granulocytes and macrophages in vitro. The material used to induce colony formation (CSF) was prepared from an extract of pregnant mouse uteri. This CSF preparation was found to be free of factors modifying the response. Under these culture conditions, in vitro colony forming cells (CFU-c) were found to be relatively homogeneous in their buoyant density. This homogeneity was independent of CSF concentration. A heterogeneous density profile of CFU-c was obtained when various cell fractions were cultured in the presence of CSF and rat blood lysate. The majority of the additional cells which responded to erythrocyte lysate were dense (modal density 1.080 g/cm³) compared to CFU-c which respond to CSF alone (modal density 1.074 g/cm³). It is concluded that in vitro colonies induced by CSF and in vitro colonies grown in the presence of CSF and erythrocyte lysate reflect two different populations of CFU-c.     

THE IN VITRO DIFFERENTIATION OF DENSITY SUB-POPULATIONS OF COLONY-FORMING CELLS UNDER THE INFLUENCE OF DIFFERENT TYPES OF COLONY-STIMULATING FACTOR

The in vitro proliferation and differentiation of myeloid progenitor cells (CFU-c) in agar culture from CBA/Ca mouse bone marrow cells was studied. Density sub-populations of marrow cells were obtained by equilibrium centrifugation in continuous albumin density gradients. The formation of colonies of granulocytes and/or macrophages was studied under the influence of three types of colony-stimulating factor (CSF) from mouse lung conditioned medium CSF_MLCM), post-endotoxin mouse serum (CSF_ES) and from human urine (CSF_Hu). The effect of the sulphydryl reagent mercaptoethanol on colony development was also examined. The density distribution of CFU-c was dependent on the type of CSF. Functional heterogeneity was found among CFU-c with partial discrimination between progenitor cells forming pure granulocytic colonies and those forming pure macro-phage colonies. Mercaptoethanol increased colony incidence but had no apparent effect on colony morphology or the density distribution of CFU-c.     

The in vitro differentiation of density sub-populations of colony-forming cells under the influence of different types of colony-stimulating factor.

The in vitro proliferation and differentiation of myeloid progenitor cells (CFU-c) in agar culture from CBA/Ca mouse bone marrow cells was studied. Density subpopulations of marrow cells were obtained by equilibrium centrifugation in continuous albumin density gradients. The formation of colonies of granulocytes and/or macrophages was studied under the influence of three types of colony-stimulating factor (CSF) from mouse lung conditioned medium CSFMLCM), post-endotoxin mouse serum (CSFES) and from human urine (CSFHu). The effect of the sulphydryl reagent mercaptoethanol on colony development was also examined. The density distribution of CFU-c was dependent on the type of CSF. Functional heterogeneity was found among CFU-c with partial discrimination between progenitor cells forming pure granulocytic colonies and those forming pure macrophage colonies. Mercaptoethanol increased colony incidence but had no apparent effect on colony morphology or the density distribution of CFU-c.     

Modulation of normal myelopoiesis invitro by retinoic acid

The effects of retinoic acid (RA) on the proliferation and differentiation of normal myeloid progenitor cells (CFU-C) were studied. In general, RA at 10^?10 to 10^?6 M enhanced primary myeloid colony formation in the presence of colony-stimulating factor(s). However, macrophage colony formation was strongly inhibited by RA. This may be related to the finding that RA is able to differentiate bipotential HL-60 cells into granulocytes but not into macrophages. Moreover, secondary colony formation was always suppressed by the addition of RA to the primary cultures. It means that self-renewal capacity of CFU-C was suppressed by RA. This finding suggests that normal myelopoiesis will be suppressed eventually by RA.     

Selenium Impregnated Monolithic Carbons as Free‐Standing Cathodes for High Volumetric Energy Lithium and Sodium Metal Batteries

Energy density (energy per volume) is a key consideration for portable, automotive, and stationary battery applications. Selenium (Se) lithium and sodium metal cathodes are created that are monolithic and free‐standing, and with record Se loading of 70 wt%. The carbon host is derived from nanocellulose, an abundant and sustainable forestry product. The composite is extremely dense (2.37 g cm^?3), enabling theoretical volumetric capacity of 1120 mA h cm^?3. Such architecture is fully distinct from previous Se–carbon nano‐ or micropowders, intrinsically offering up to 2× higher energy density. For Li storage, the cathode delivers reversible capacity of 1028 mA h cm^?3 (620 mA h g^?1) and 82% retention over 300 cycles. For Na storage, 848 mA h cm^?3 (511 mA h g^?1) is obtained with 98% retention after 150 cycles. The electrodes yield superb volumetric energy densities, being 1727 W h L^?1 for Li–Se and 980 W h L^?1 for Na–Se normalized by total composite mass and volume. Despite the low surface area, over 60% capacity is maintained as the current density is increased from 0.1 to 2 C (30 min charge) with Li or Na. Remarkably, the electrochemical kinetics with Li and Na are comparable, including the transition from interfacial to diffusional control.     

Chromoplasts of Tropaeolum majus L.: Isolation and characterization of lipoprotein elements

Summary Chromoplasts of unfolding petals of Tropaeolum majus contain large amounts of filaments (which, in sections, appear as tubules), and unevenshaped, isodiametric to elongated bodies (IBs). These structural elements are the major sites of the chromoplast pigments. They were freed from isolated chromoplasts and subjected to sucrose density gradient centrifugation. At a density of 1.080 g cm^-3 a distinct orange band contained almost exclusively fine filaments of 15–20 nm in diameter as shown after negative staining. Other filaments and most of the IBs were heterogeneous in size, shape, and density and were collected in two fractions of buoyant densities of 1.025 and 1.055 g cm^-3. The three fractions thus obtained comprise 15–33% protein, large amounts of carotenoids and their esters, glyco- and phospholipids, as well as minor amounts of tocopherols. A higher buoyant density of particles is correlated with a higher relative content of protein and glyco- and phospholipids and a lower relative content of carotenoids. The polypeptide pattern, as shown by SDS-polyacrylamide gel electrophoresis, is very similar in all three fractions. There is one main polypeptide, with a MW of about 30,000, accounting for up to 80% of the protein of each fraction.Abbreviations IBs uneven-shaped, isodiametric to elongated bodies     

EFFECTS OF HUMAN LEUKOCYTE CONDITIONED MEDIUM ON MOUSE HAEMOPOIETIC PROGENITOR CELLS

Medium conditioned by human peripheral blood leukocytes (HLCM) was studied for its in vitro effects on haemopoietic progenitor cells (CFU-s and CFU-c) present in mouse bone marrow. HLCM has poor colony stimulating activity in semi-solid cultures of mouse bone marrow cells. but invariably increases the number of colonies obtained in the presence of plateau levels of semi-purified colony stimulating factor (CSF). In liquid cultures, HLCM appears to contain a potent initiator of DNA synthesis in CFU-s. an activity which coincides with an increased CFU-s maintenance and causes a three- to four-fold increase in CFU-c number. It is apparent from this study that HLCM, in addition to stimulating colony formation in cultures of human bone marrow cells, has a profound in vitro effect on primitive haemopoietic progenitor cells of the mouse, which cannot be attributed to CSF.     

Localization of thyroid hormone in subpopulations of rat alveolar macrophages

Summary Radioimmunoassay and immunocytochemical staining methods were used to study the distribution of thyroid hormone in rat alveolar macrophages. The cells were fractionated into six subpopulations by Percoll density gradient. Positive immunoreactive tri-iodothyronine (T₃) was observed in all subpopulations of macrophages, especially in low-density (1.040 and 1.050 g cm^–3) groups, by avidin-biotin-peroxidase immunostaining techniques. The macrophages also showed various patterns of cellular T₃ stainability. Results from radioimmunoassay of macrophage extracts also demonstrated that macrophages of low density had a higher level of total T₃ than those of higher densities (1.060 g cm^–3).     

Isolation and separation of cysts and epimastigotes of Blastocrithidia triatomae Cerisola et al., 1971 (Trypanosomatidae)

Developmental stages of the flagellate Blastocrithidia triatomae were isolated according to differences in density or in surface charge from dry feces or the intestinal content of reduviid hosts or from in vitro cultures which contained host cells. Isopycnic ultracentrifugation on isoosmotic Percoll gradients separated cysts (ϱ = 1.145 g/cm³) from epimastigotes (ϱ = 1.075 g/cm³), representing the two major morphological stages of B. triatomae. Moreover, a continuous shift in buoyant density of encystating and/or excystating stages from the level of mature cysts to lower densities displayed by epimastigotes was observed. This characteristic excluded the isolation of pure epimastigotes by density gradients. Nevertheless, approximately 1 × 10⁸ mature cysts per gradient were obtained by this procedure. Employing DEAE-ion exchange chromatography for cyst isolation, approximately 2 × 10¹⁰ cysts could be purified per column. In addition, DEAE-chromatography was used for the isolation of pure epimastigote fractions. The succesful isolation of B. triatomae-stages from three completely different sources suggests that the methods derived in our study may be easily adapted for the isolation of other insect trypanosomatids.     

An analysis of the bovine genome by Cs2SO4-Ag density gradient centrifugation

Calf DNA preparations having molecular weights of 5 to 7 × 10⁶ have been fractionated by preparative Cs₂SO₄—Ag⁺ density gradient centrifugation into a number of components. These may be divided into three groups: (1) the main DNA component (1.697 g/cm³; all densities quoted are those determined in CsCl density gradients), the 1.704 and 1.709 g/cm³ components form about 50, 25 and 10% of the genome, respectively; they are characterized by having symmetrical CsCl bands and melting curves, both of which have standard deviations close to those of bacterial DNAs of comparable molecular weight, and by their G + C contents being equal to 39, 48 and 54%, respectively; after heat-denaturation and reannealing, their buoyant densities in CsCl are greater than native DNA by 12, 10 and 3 mg/cm³, respectively. (2) The 1.705, 1.710, 1.714 and 1.723 g/cm³ components represent 4, 1.5, 7 and 1.5% of the DNA, respectively, and exhibit the properties of “satellite” DNAs; their CsCl bands and melting curves have standard deviations lower than those of bacterial DNAs; after heat-denaturation and reannealing, their buoyant densities are identical to native DNA, except for the 1.705 g/cm³ component, which remains heavier by 5 mg/cm³; in alkaline CsCl, only the 1.714 g/cm³ component shows a strand separation. (3) A number of minor components, forming 1% of the DNA, have been recognized, but they have not been investigated in detail; two of them (1.719 and 1.699 g/cm³) might correspond to ribosomal cistrons and mitochondrial DNA, respectively.     

Recombination in yeast mitochondrial DNA

When haploid yeast strains containing mitochondrial DNAs (mtDNAs) of different buoyant densities are mated, the resulting zygotes contain a mixed population of mitochondria and mitochondrial DNAs. During vegetative growth of diploid cells formed from such a cross between a petite strain with mtDNA of density 1.677 g cm^?3 and a respiratory competent strain with mtDNA of density 1.684 g cm^?3, mtDNAs with intermediate buoyant densities are obtained. Virtually all newly synthesized mtDNA in diploid ρ^? progeny has the intermediate buoyant density. Therefore, within 2 generations of growth of the diploid cells, the intermediate buoyant density species predominate. In crosses between a respiratory competent strain and other petite strains with different values of genetic suppressiveness, it was found that the amount of recombination yielding mtDNAs of intermediate buoyant densities roughly parallels the degree of suppressiveness. Individual clones of respiratory deficient cells from such crosses were also isolated to confirm that stable mtDNAs with intermediate buoyant densities were obtained. Thus, it is apparent that some form of recombination takes place within the mtDNAs of yeast cells that results in stable mtDNA species.     

Does root-sourced ABA have a role in mediating growth and stomatal responses to soil compaction in tomato (Lycopersicon esculentum)?

Isogenic wild-type (Ailsa Craig) and abscisic acid (ABA)-deficient mutant (flacca) genotypes of tomato were used to examine the role of root-sourced ABA in mediating growth and stomatal responses to compaction. Plants were grown in uniform soil columns providing low to moderate bulk densities (1.1–1.5 g cm^?3), or in a split-pot system, which allowed the roots to divide between soils of the same or differing bulk density (1.1/1.5 g cm^?3). Root and shoot growth and leaf expansion were reduced when plants were grown in compacted soil (1.5 g cm^?3) but leaf water status was not altered. However, stomatal conductance was affected, suggesting that non-hydraulic signal(s) transported in the transpiration stream were responsible for the observed effects. Xylem sap and foliar ABA concentrations increased with bulk density for 10 and 15 days after emergence (DAE), respectively, but were thereafter poorly correlated with the observed growth responses. Growth was reduced to a similar extent in both genotypes in compacted soil (1.5 g cm^?3), suggesting that ABA is not centrally involved in mediating growth in this severely limiting ‘critical’ compaction stress treatment. Growth performance in the 1.1/1.5 g cm^?3 split-pot treatment of Ailsa Craig was intermediate between the uniform 1.1 and 1.5 g cm^?3 treatments, whereas stomatal conductance was comparable to the compacted 1.5 g cm^?3 treatment. In contrast, shoot dry weight and leaf area in the split-pot treatment of flacca were similar to the 1.5 g cm^?3 treatment, but stomatal conductance was comparable to uncompacted control plants. These results suggest a role for root-sourced ABA in regulating growth and stomatal conductance during ‘sub-critical’ compaction stress, when genotypic differences in response are apparent. The observed genotypic differences are comparable to those previously reported for barley, but occurred at a much lower bulk density, reflecting the greater sensitivity of tomato to compaction. By alleviating the severe growth reductions induced when the entire root system encounters compacted soil, the split-pot approach has important applications for studies of the role of root-sourced signals in compaction-sensitive species such as tomato.     

3D Vertically Aligned Li Metal Anodes with Ultrahigh Cycling Currents and Capacities of 10 mA cm−2/20 mAh cm−2 Realized by Selective Nucleation within Microchannel Walls

Although metallic lithium is regarded as the “Holy Grail” for next‐generation rechargeable batteries due to its high theoretical capacity and low overpotential, the uncontrollable Li dendrite growth, especially under high current densities and deep plating/striping, has inhibited its practical application. Herein, a 3D‐printed, vertically aligned Li anode (3DP‐VALi) is shown to efficiently guide Li deposition via a “nucleation within microchannel walls” process, enabling a high‐performance, dendrite‐free Li anode. Moreover, the microchannels within the microwalls are beneficial for promoting fast Li⁺ diffusion, supplying large space for the accommodation of Li during the plating/stripping process. The high‐surface‐area 3D anode design enables high operating current densities and high areal capacities. As a result, the Li–Li symmetric cells using 3DP‐VALi demonstrate excellent electrochemical performances as high as 10 mA cm^?2/10 mAh cm^?2 for 1500 h and 5 mA cm^?2/20 mAh cm^?2 for 400 h, respectively. Additionally, the Li–S and Li–LiFePO₄ cells using 3DP‐VALi anodes present excellent cycling stability up to 250 and 800 cycles at a rate of 1 C, respectively. It is believed that these new findings could open a new window for dendrite‐free metal anode design and pave the way toward energy storage devices with high energy/power density.     

DMSO-induced terminal differentiation and trisomy 15 in myeloid cell line transformed by the Rauscher murine leukemia virus

A new myeloid cell line was isolated from a myeloid leukemia obtained after infection of BALB/c mice with Rauscher murine leukemia virus (R-MuLV). After syngeneic transplantation of leukemic cells tumor formation was induced. Of one of these tumors a permanent cell line could be established. The cells grow in suspension culture with a doubling time of 18 h and morphologically and cytochemically show all the characteristics of myelocytes. The cells carry trisomy of chromosome 15. These cells prove to be completely independent of colony stimulating activity (CSA) regarding both their growth and their differentiation capacity.One of the main characteristics of this cell line is its inducibility for terminal differentiation after treatment with dimethylsulfoxide varying in concentrations from 0.5% to 1.5%. After two days metamyelocytes and after three to four days granulocytes and macrophages formed. The differentiation of these cells goes together with an increase of lysosomal enzyme activities like β-N-acetylglucosaminidase and lysozyme.     

All‐Solid‐State On‐Chip Supercapacitors Based on Free‐Standing 4H‐SiC Nanowire Arrays

All‐solid‐state on‐chip SiC supercapacitors (SCs) based on free‐standing SiC nanowire arrays (NWAs) are reported. In comparison to the widely used technique based on the interdigitated fingers, the present strategy can be much more facile for constructing on‐chip SCs devices, which is directly sandwiched with a solid electrolyte layer between two pieces of SiC NWAs film without any substrate. The mass loading of active materials of on‐chip SiC SCs can be up to ≈5.6 mg cm^?2, and the total device thickness is limited in ≈40 µm. The specific area energy and power densities of the SCs device reach 5.24 µWh cm^?2 and 11.2 mW cm^?2, and their specific volume energy and power densities run up to 1.31 mWh cm^–3 and 2.8 W cm^?3, respectively, which are two orders of magnitude higher than those of state‐of‐the‐art SiC‐based SCs, and also much higher than those of other solid‐state carbon‐based SCs ever reported. Furthermore, such on‐chip SCs exhibit superior rate capability and robust stability with over 94% capacitance retention after 10 000 cycles at a scan rate of 100 mV s^?1, representing their high performance in all merits.     

Utilization of enzyme markers to determine the location of plasma membrane from Pisum epicotyls on sucrose gradients

Using linear sucrose gradients, particulates derived from pea (Pisum sativum L. cv. Alaska) epicotyls have been fractionated and examined for marker enzyme activity. The coincidence of three reputed plasma-membrane markers [cellulase (EC 3.2.1.4), K⁺-stimulated Mg²⁺-ATPase, and glucan synthetase] at the same position on sucrose density gradients, in combination with electron microscopic evidence reported by G. Shore and G. Maclachlan (J. Cell Biol. 64, 557–571; 1975), indicates that plasma membrane of pea epicotyl has a buoyant density of about 1.13 g/cm³. This density disagrees with those usually reported for plant plasma membranes and also with recent reports for Pisum. It is, however, shown to be distinct from the equilibrium densities of enzymic markers for particulate components derived from Pisum endoplasmic reticulum (1.10–1.11 g/cm³), Golgi (1.12 g/cm³) and mitochondria (1.18 g/cm³). Furthermore, other recent literature indicates that the 1.13 g/cm³ buoyant density may be characteristic of the plasma membrane of many members of the Leguminosae. Our data indicate that the conditions of differential centrifugation (time, centrifugal force), coupled with the amount of protein utilized, affect the resolution and interpretation of profiles of marker enzymes on sucrose gradients (e.g. glucan synthetase and K⁺-stimulated Mg²⁺-ATPase were sometimes found to be associated not only with particles of 1.13 g/cm³ density, but with particles of higher densities as well). Particulate cellulase was found to be associated only with particles with equilibrium densities of about 1.13 g/cm³. Cellulase thus proved to be the most useful marker for establishing a differential centrifugation regime which would permit examination of the 1.13 g/cm³ particulate components with minimal contamination by particles of higher densities.     

Stereological estimation of the surface area and oxygen diffusing capacity of the respiratory stomach of the air‐breathing armored catfish Pterygoplichthys anisitsi (Teleostei: Loricariidae)

The stomach of Pterygoplichthys anisitsi has a thin, translucent wall and a simple squamous epithelium with an underlying dense capillary network. In the cardiac and pyloric regions, most cells have short microvilli distributed throughout the cell surface and their edges are characterized by short, densely packed microvilli. The mucosal layer of the stomach has two types of pavement epithelial cells that are similar to those in the aerial respiratory organs. Type 1 pavement epithelial cells, resembling the Type I pneumocyte in mammal lungs, are flat, with a large nucleus, and extend a thin sheet of cytoplasm on the underlying capillary. Type 2 cells, resembling the Type II pneumocyte, possess numerous mitochondria, a well‐developed Golgi complex, rough endoplasmic reticulum, and numerous lamellar bodies in different stages of maturation. The gastric glands, distributed throughout the mucosal layer, also have several cells with many lamellar bodies. The total volume (air + tissue), tissue, and air capacity of the stomach when inflated, increase along with body mass. The surface‐to‐tissue‐volume ratio of stomach varies from 108 cm^?1 in the smallest fish (0.084 kg) to 59 cm^?1 in the largest fish (0.60 kg). The total stomach surface area shows a low correlation to body mass. Nevertheless, the body‐mass‐specific surface area varied from 281.40 cm² kg^?1 in the smallest fish to 68.08 cm² kg^?1 in the largest fish, indicating a negative correlation to body mass (b = ?0.76). The arithmetic mean barrier thickness between air and blood was 1.52 ± 0.07 μm, whereas the harmonic mean thickness (τ_h) of the diffusion barrier ranged from 0.40 to 0.74 μm. The anatomical diffusion factor (ADF = cm² μm^?1 kg^?1) and the morphological O₂ diffusion capacity (D_morpholO₂ = cm³ min^?1 mmHg^?1 kg^?1) are higher in the smallest specimen and lower in the largest one. In conclusion, the structure and morphometric data of P. anisitsi stomach indicate that this organ is adapted for oxygen uptake from air. J. Morphol. 2009. © 2008 Wiley‐Liss, Inc.     

3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities

Developing advanced supercapacitors with both high areal and volumetric energy densities remains challenging. In this work, self‐supported, compact carbon composite electrodes are designed with tunable thickness using 3D printing technology for high‐energy‐density supercapacitors. The 3D carbon composite electrodes are composed of the closely stacked and aligned active carbon/carbon nanotube/reduced graphene oxide (AC/CNT/rGO) composite filaments. The AC microparticles are uniformly embedded in the wrinkled CNT/rGO conductive networks without using polymer binders, which contributes to the formation of abundant open and hierarchical pores. The 3D‐printed ultrathick AC/CNT/rGO composite electrode (ten layers) features high areal and volumetric mass loadings of 56.9 mg cm^?2 and 256.3 mg cm^?3, respectively. The symmetric cell assembled with the 3D‐printed thin GO separator and ultrathick AC/CNT/rGO electrodes can possess both high areal and volumetric capacitances of 4.56 F cm^?2 and 10.28 F cm^?3, respectively. Correspondingly, the assembled ultrathick and compact symmetric cell achieves high areal and volumetric energy densities of 0.63 mWh cm^?2 and 1.43 mWh cm^?3, respectively. The all‐component extrusion‐based 3D printing offers a promising strategy for the fabrication of multiscale and multidimensional structures of various high‐energy‐density electrochemical energy storage devices.     

The importance of colony structure versus shoot morphology for the water balance of 22 subarctic bryophyte species

Questions: What are the water economy strategies of the dominant subarctic bryophytes in terms of colony and shoot traits? Can colony water retention capacity be predicted from morphological traits of both colonies and separate shoots? Are suites of water retention traits consistently related to bryophyte habitat and phylogenetic position? Location: Abisko Research Station, North Sweden. Methods: We screened 22 abundant subarctic bryophyte species from diverse habitats for water economy traits of shoots and colonies, including desiccation rates, water content at field capacity, volume and density (mg cm^?3) of water‐saturated and oven‐dried patches, evaporation rate (g·m^?2·s^?1) and cell wall thickness. The relationships between these traits and shoot and colony desiccation rates were analysed with Spearman rank correlations. Subsequent multivariate (cluster followed by PCA) analyses were based on turf density, turf and shoot desiccation rate, cell wall thickness and amount of external and internal water. Results: Individual shoot properties, i.e. leaf cell wall properties, water retention capacity and desiccation rate, did not correspond with colony water retention capacity. Colony desiccation rate depended on density of water‐saturated colonies, and was marginally significantly negatively correlated with species individual shoot desiccation rate but not related to any other shoot or colony trait. Multivariate analyses based on traits assumed to determine colony desiccation rate revealed six distinct species groups reflecting habitat choice and phylogenetic relationships. Conclusions: General relationships between shoot and colony traits as determinants of water economy will help to predict and upscale changes in hydrological function of bryophyte‐dominated peatlands undergoing climate‐induced shifts in species abundance, and feedbacks of such species shifts on permafrost insulation and carbon sequestration functions.     

Going beyond Intercalation Capacity of Aqueous Batteries by Exploiting Conversion Reactions of Mn and Zn electrodes for Energy‐Dense Applications

The recent trend in zinc (Zn) anode aqueous batteries has been to explore layered structures like manganese dioxides and vanadium oxides as Zn‐ion intercalation hosts. These structures, although novel, face limitations like their layered counterparts in lithium (Li)‐ion batteries, where the capacity is limited to the host's intercalation capacity. In this paper, a new strategy is proposed in enabling new generation of energy dense aqueous‐based batteries, where the conversion reactions of rock salt/spinel manganese oxides and carbon nanotube‐nested nanosized Zn electrodes are exploited to extract significantly higher capacity compared to intercalation systems. Accessing the conversion reactions allows to achieve high capacities of 750 mAh g^?1 (≈30 mAh cm^?2) from manganese oxide (MnO) and 810 mAh g^?1 (≈30 mAh cm^?2) from nanoscale Zn anodes, respectively. The high areal capacities help to attain unprecedented energy densities of 210 Wh per L‐cell and 320 Wh per kg‐total (398 Wh per kg‐active) from aqueous MnO|CNT‐Zn batteries, which allows an assessment of its viable use in a small‐scale automobile.