Characterization, seasonal occurrence, and diel fluctuation of poly(hydroxyalkanoate) in photosynthetic microbial mats

In situ poly(hydroxyalkanoate) (PHA) levels and repeating-unit compositions were examined in stratified photosynthetic microbial mats from Great Sippewissett Salt Marsh, Mass., and Ebro Delta, Spain. Unlike what has been observed in pure cultures of phototrophic bacteria, the prevalence of hydroxyvalerate (HV) repeating units relative to hydroxybutyrate (HB) repeating units was striking. In the cyanobacteria-dominated green material of Sippewissett mats, the mole percent ratio of repeating units was generally 1HB:1HV. In the purple sulfur bacteria-dominated pink material the relationship was typically 1HB:2HV. In Sippewissett mats, PHA contributed about 0.5 to 1% of the organic carbon in the green layer and up to 6% in the pink layer. In Ebro Delta mats, PHA of approximately 1HB:2HV-repeating-unit distribution contributed about 2% of the organic carbon of the composite photosynthetic layers (the green and pink layers were not separated). Great Sippewissett Salt Marsh mats were utilized for more extensive investigation of seasonal, diel, and exogenous carbon effects. When the total PHA content was normalized to organic carbon, there was little seasonal variation in PHA levels. However, routine daily variation was evident at all sites and seasons. In every case, PHA levels increased during the night and decreased during the day. This phenomenon was conspicuous in the pink layer, where PHA levels doubled overnight. The daytime declines could be inhibited by artificial shading. Addition of exogenous acetate, lactate, and propionate induced two- to fivefold increases in the total PHA levels when applied in the daylight but had no effect when applied at night. The distinct diel pattern of in situ PHA accumulation at night appears to be related, in some phototrophs, to routine dark energy metabolism and is not influenced by the availability of organic nutrients.     

Pigments, light penetration, and photosynthetic activity in the multi-layered microbial mats of Great Sippewissett Salt Marsh, Massachusetts

The multi-layered microbial mats in the sand flats of Great Sippewissett Salt Marsh were found to have five distinct layers of phototrophic organisms. The top 1–3 mm contained oxygenic phototrophs. The lower 3–4 mm contained anoxygenic phototrophic bacteria. The uppermost gold layer contained diatoms and cyanobacteria, and chlorophyll a was the major chlorophyll. The next layer down was green and was composed of primarily filamentous cyanobacteria containing chlorophyll a. This was followed by a bright pink layer of bacteriochlorophyll b-containing purple sulfur bacteria. The lowest layer was a thin dull green layer of green sulfur bacteria containing bacteriochlorophyll c. The distribution of the chlorophylls with depth revealed that two-thirds of the total chlorophyll in the mat was composed of bacteriochlorophylls present in the anoxygenic phototrophys. The cyanobacterial layers and both purple sulfur bacterial layers had photoautotrophic activity. Light was attenuated in the uppermost layers so that less than 5% of the total radiation at the surface penetrated to the layers of anoxygenic phototrophys.     

A Novel Genetically Engineered Pathway for Synthesis of Poly(Hydroxyalkanoic Acids) in Escherichia coli

A new pathway to synthesize poly(hydroxyalkanoic acids) (PHA) was constructed by simultaneously expressing butyrate kinase (Buk) and phosphotransbutyrylase (Ptb) genes of Clostridium acetobutylicum and the two PHA synthase genes (phaE and phaC) of Thiocapsa pfennigii in Escherichia coli. The four genes were cloned into the BamHI and EcoRI sites of pBR322, and the resulting hybrid plasmid, pBPP1, conferred activities of all three enzymes to E. coli JM109. Cells of this recombinant strain accumulated PHAs when hydroxyfatty acids were provided as carbon sources. Homopolyesters of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), or 4-hydroxyvalerate (4HV) were obtained from each of the corresponding hydroxyfatty acids. Various copolyesters of those hydroxyfatty acids were also obtained when two of these hydroxyfatty acids were fed at equal amounts: cells fed with 3HB and 4HB accumulated a copolyester consisting of 88 mol% 3HB and 12 mol% 4HB and contributing to 68.7% of the cell dry weight. Cells fed with 3HB and 4HV accumulated a copolyester consisting of 94 mol% 3HB and 6 mol% 4HV and contributing to 64.0% of the cell dry weight. Cells fed with 3HB, 4HB, and 4HV accumulated a terpolyester consisting of 85 mol% 3HB, 13 mol% 4HB, and 2 mol% 4HV and contributing to 68.4% of the cell dry weight.     

Ability of the phototrophic bacterium Rhodospirillum rubrum to produce various poly (beta-hydroxyalkanoates): potential sources for biodegradable polyesters

Studies have been carried out in order to optimize growth and culture conditions for the intracellular formation of poly(beta-hydroxyalkanoates) (PHA) in the phototrophic, purple, non-sulphur bacterium Rhodospirilum rubrum. Its potential to produce novel copolymers was investigated. Recently, it has become of industrial interest to evaluate these polyesters as potentially biodegradable plastics for a wide range of possible applications. On an industrial scale, the use of photosynthetic bacteria could harness sunlight as an energy source for the production of these materials. R. rubrum was grown anaerobically in the light on different linear and branched beta-hydroxycarboxylic acids and various n-alkanoic acids. Under nitrogen-limiting conditions a PHA content of up to 45% of cellular dry weight was detected. When R. rubrum was grown on different concentrations of various n-alkanoic acids, intracellular PHA production was detected on all acids used. In most of the cases, the storage polymer contained beta-hydroxybutyrate (HB) and beta-hydroxyvalerate (HV) monomer units. Grown on n-alkanoic acids with a chain length of four carbon atoms and more, R. rubrum produced a copolymer containing the beta-hydroxyhexanoate (HC) repeating unit in addition to the HB and HV monomer. Using beta-hydroxyheptanoic acid as the carbon source, a polyester which contained HB, HV, HC, and beta-hydroxyheptanoate was formed. These copolyesters represent a novel class of biodegradable thermoplastics. The results demonstrate the metabolic flexibility of R. rubrum to form many different types of polyesters which might substitute plastics synthesized from petrochemicals.     

Effect of carbon source on the formation of polyhydroxyalkanoates (PHA) by a phosphate-accumulating mixed culture

In the present work, attention was devoted to understand how different carbon substrates and their concentration can influence the production of PHA by polyphosphate-accumulating bacteria. Acetate, propionate, and butyrate were tested independently. The composition of the polymers formed was found to vary with the substrate used. Acetate leads to the production of a copolymer of hydroxybutyrate (HB) and hydroxyvalerate (HV) with the HB units being dominant. With propionate, HV units are mainly produced and only a small amount of HB is synthesized. When butyrate is used, the amount of polymer formed is much lower with the HB units being produced to a higher extent. The yield of polymer produced per carbon consumed (Y_P/S) was found to diminish from acetate (0.97) to propionate (0.61) to butyrate (0.21). Using a mixture of acetate, propionate, and butyrate and increasing the carbon concentration, although maintaining the relative concentration of each substrate, propionate is primarily consumed and consequently, PHA synthesized was enriched in HV units. The polymers obtained in all experiments were copolymers with the average molecular weight of the most representative fraction higher when hydroxybutyrate units were present in considerable amounts. All the polymers synthesized were found to be quite homogeneous and their average molecular weight is of the same order of magnitude as the ones commercially available.     

Synthesis of poly-hydroxyalkanoates from activated sludge under various oxidation-reduction potentials

The production of poly-hydroxyalkanoates (PHA) from the activated sludge subjected to conditions with various oxidationreduction potentials (ORPs) was investigated. By controlling the dissolved oxygen concentration in the cultural media, the ORP were kept at preset levels of ?20, ?10, 0, and +10 mV. With glucose as the dedicated carbon source, we have demonstrated a correlating relationship with the ORP’s in the culture media to the PHA accumulation rate, the PHA production-yield, cell growth rate, glucose uptakes and 3-hydroxybutyrate to 3-hydroxyvalerate (HB/HV) mole ratios in the PHA copolymers. The highest PHA production yield of 0.26 g/g with HB/HV mole ratio of 8.03 was achieved at +10 mV ORP. We concluded that oxygen plays an important role in PHA accumulation and HB/HV mole ratio activated sludge-to-copolymer PHA conversion process.     

Vertical distribution of methane metabolism in microbial mats of the Great Sippewissett Salt Marsh

Methane metabolism was investigated with respect to depth in intertidal microbial mats of the Great Sippewissett Salt Marsh, Massachusetts. Although sulfate-reducing organisms dominate anaerobic carbon consumption in marine microbial mats, methanogens persist and their activity varies vertically and temporally in the mat system. In the Sippewissett mats, potential methane production for all mat layers was higher in the spring (17.2 ± 4.5 nmol CH₄ cm⁻² day⁻¹) than in the fall (3.0 ± 1.1 nmol CH₄ cm⁻² day⁻¹) and maximal rates were consistently observed in proximity to the chemocline (5–10 mm depth). The methane flux from the mat surface did not vary appreciably over time due to the ability of methanotrophic activity to limit net methane production. Evidence indicates that both aerobic and anaerobic oxidation of methane occurs in this system. The importance of H₂ as a substrate for methanogenesis appeared to be the greatest at the mat surface (0–10 mm), and the proportion of methylotrophic methanogens generally increased with depth. These results suggest that both non-equilibrium H₂ dynamics and the use of non-competitive substrates permit coexistence of methanogens and sulfate-reducing organisms in the mat system.     

Structure of a microbiol mat at Great Sippewissett Marsh, Cape Cod, Massachusetts

The microzination of phototrophic bacteria in a flat laminated microbiol mat at Great Sippewissett Salt Marsh on Cape Cod, Massachusetts, was studied using a combination of scanning and transmission electron microscopy, light microscopy and photosynthetic pigment analysis. Comparison of pigment content and ultrastructural information from electron microscopy of thin sections allowed us to determine the major groups of photosynthetic bacteria present. The approximately 1-cm-thick mat is located in sandy intertidal sediments of the marsh and comprised four to five distinctly colored layers. The uppermost brown layer contained Lyngbya, Nostoc, Phormidium (cyanobacteria) and Navicula (diatom) species. An intermediate bluish-green layer was dominated by Oscillatoria species. A central pink layer contained purple sulfur bacteria such as Amoebobacter, Thiocapsa, Chromatium and Thiocystis species, Below this was a distinctive orange layer, formed largely by one species of purple sulfur bacteria, Thiocapsa pfennigii. The lowermost and thinnest layer contained green sulfur bacteria of the genus Prosthecochloris, a very small prosthecate species with numerous knobby projections; this layer was not always present. Below this, where pigments were generally absent, were dark gray and black iron sulfide-rich sediments. Remnants of older decayed mats could be found deeper in the sediment. Extensive production of microbial extracellular polymers in all layers appeared to be responsible for attachment of cells to sand grains, for lamination of layers and for structural integrity of the mat as a whole. Below the layer of green sulfur bacteria, binding of sediment by microbial polymers ceased abruptly. Possibly in response to decreasing light penetration, the mean size of bacterial cells decreased in successively deeper layers. In the lowest layer where light penetration was very low, green sulfur bacteria with highly convoluted surfaces occurred. The increase in cell surface area-to-volume ratio may allow such organisms to survive at low light levels.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

Rapid spectrofluorometric screening of poly-hydroxyalkanoate-producing bacteria from microbial mats.

Microbial mat ecosystems are characterized by both seasonal and diel fluctuations in several physicochemical variables, so that resident microorganisms must frequently adapt to the changing conditions of their environment. It has been pointed out that, under stress conditions, bacterial cells with higher contents of poly-hydroxyalkanoates (PHA) survive longer than those with lower PHA content. In the present study, PHA-producing strains from Ebro Delta microbial mats were selected using the Nile red dying technique and the relative accumulation of PHA was monitored during further laboratory cultivation. The number of heterotrophic isolates in trypticase soy agar (TSA) was ca. 107 colony-forming units/g microbial mat. Of these, 100 randomly chosen colonies were replicated on mineral salt agar limited in nitrogen, and Nile red was added to the medium to detect PHA. Orange fluorescence, produced upon binding of the dye to polymer granules in the cell, was detected in approximately 10% of the replicated heterotrophic isolates. The kinetics of PHA accumulation in Pseudomonas putida, and P. oleovorans were compared with those of several of the environmental isolates spectrofluorometry. PHA accumulation, measured as relative fluorescence intensity, resulted in a steady-state concentration after 48 h of incubation in all strains assayed. At 72 h, the maximum fluorescence intensity of each strain incubated with glucose and fructose was usually similar. MAT-28 strain accumulated more PHA than the other isolates. The results show that data obtained from environmental isolates can highly improve studies based on modeling-simulation programs, and that microbial mats constitute an excellent source for the isolation of PHA-producing strains with industrial applications.     

Formation of poly(3-hydroxyalkanoates) by phototrophic and chemolithotrophic bacteria

The formation of poly(3-hydroxyalkanoic acid), PHA, by various strains of chemolithotrophic and phototrophic bacteria has been examined. Chemolithotrophic bacteria were grown aerobically under nitrogen-limiting conditions on various aliphatic organic acids. Phototrophic bacteria were grown anaerobically in the light on a nitrogen-rich medium and were subsequently transferred to a nitrogen-free medium containing acetate, propionate, valerate, heptanoate or octanoate as carbon source. All 41 strains investigated in this study were able to synthesize and accumulate PHA. All 11 strains of chemolithotrophic bacteria and all 15 strains belonging to the non-sulfur purple bacteria synthesized a polymer, which contained 3-hydroxy-valerate (3HV) beside 3-hydroxybutyrate (3HB), if the cells were cultivated in the presence of propionate, valerate or heptanoate. Many non-sulfur purple bacteria synthesized copolyesters of 3HB and 3HV even with acetate as carbon source. In contrast, most sulfur purple bacteria did not incorporate 3HV at all. Among 15 strains tested, only Chromatium vinosum strain 1611, C. purpuratum strain BN5500 and Lamprocystis roseopersicina strain 3112 were able to synthesize polyesters containing 3HV with propionate, valerate or heptanoate as carbon source.     

Cosmopolitan distribution of the large composite microbial mat spirochete, Spirosymplokos deltaeiberi.

Inocula from organic-rich black muds immediately underlying intertidal laminated microbial mats dominated by Microcoleus chthonoplastes yielded large, variable diameter spirochetes. These unusual spirochetes, previously reported only from the Alfacs Peninsula at the delta of the Ebro river in northeast Spain, contain striking arrays of cytoplasmic granules packed into their protoplasmic cylinders. On several occasions, both in summer and winter, the huge spirochetes were recognized in samples from mats growing in the Sippewissett salt marsh at Woods Hole Massachusetts. They were also seen in similar samples from microbial mats at North Pond, Laguna Figueroa, Baja California Norte, Mexico. The identity of these spirochetes was confirmed by electron microscopy: number and disposition of flagella, composite structure, measurements of their distinctive cytoplasmic granules. The granules, larger, more conspicuous and present in addition to ribosomes, are hypothesized to contain ATPases. As culture conditions worsen, these spirochetes retract into membrane-bounded round bodies in which they form refractile inclusions. From morphology and behavior we conclude the North American spirochetes from both Atlantic and Pacific intertidal microbial mats are indistinguishable from those at the delta of the Ebro river. We conclude a cosmopolitan distribution for Spirosymplokos deltaeiberi.     

Local sequence dependence of polyhydroxyalkanoic acid degradation in Hydrogenophaga pseudoflava

The first order intracellular degradation of various polyhydroxyalkanoic acid (PHA) inclusions in Hydrogenophaga pseudoflava cells was investigated by analyzing the compositional and microstructural changes of the PHA using gas chromatography, (13)C NMR spectroscopy, and differential scanning calorimetry. Two types of PHA, copolymers and blend-type polymers, were separately accumulated in cells for comparison. The constituent monomers were 3-hydroxybutyric acid (3HB), 4-hydroxybutyric acid (4HB), and 3-hydroxyvaleric acid (3HV). It was found that the 3HB-4HB copolymer was degraded only when the polymer contained a minimal level of 3HB units. With the cells containing a 3HB/4HB blend-type polymer, only poly(3HB) was degraded, whereas poly(4HB) was not degraded, indicating the totally inactive nature of the intracellular depolymerase against poly(4HB). On the basis of the magnitude of the first order degradation rate constants, the relative substrate specificity of the depolymerase toward the constituting monomer units was determined to decrease in the order 3HB > 3HV > 4HB. (13)C NMR resonances of the tetrad, triad, and dyad sequences were analyzed for the samples isolated before and after degradation experiments. The results showed that the intracellular degradation depended on the local monomer sequence of the copolymers. The relative substrate specificity of the depolymerase determined from the NMR local sequence analysis agreed well with that obtained from the kinetics analysis. It is suggested that, without isolation and purification of the intracellular PHA depolymerase and "native" PHA substrates, the relative specificity of the enzyme as well as the microstructural heterogeneity of the PHA could be determined by measuring in situ the first order degradation rate constants of the PHA in cells.     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.     

Physiology of purple sulfur bacteria forming macroscopic aggregates in Great Sippewissett Salt Marsh, Massachusetts

Abstract Purple bacterial aggregates found in tidal pools of Great Sippewissett Salt Marsh (Falmouth, Cape Cod, MA) were investigated in order to elucidate the ecological significance of cell aggregation. Purple sulfur bacteria were the dominant microorganisms in the aggregates which also contained diatoms and a high number of small rod-shaped bacteria. Urea in concentrations of ≥ 1 M caused disintegration of the aggregates while proteolytic enzymes, surfactants or chaotropic agents did not exhibit this effect. This suggests that polysaccharides in the embedding slime matrix stabilize the aggregate structure. In addition cell surface hydrophobicity is involved in aggregate formation. The concentration of dissolved oxygen decreased rapidly below the surface of aggregates while sulfide was not detected. The apparent respiration rate in the aggregates was high when the purple sulfur bacteria contained intracellular sulfur globules. In the presence of DCMU, respiration remained light-inhibited. Light inhibition disappeared in the presence of KCN. These results demonstrated that respiration in the aggregates is due mainly to purple sulfur bacteria. The concentration of bacteriochlorophyll (Bchl) a in the aggregates (0.205 mg Bchl a cm⁻³) was much higher than in the pool sediments but comparable to concentrations in microbial mats of adjacent sand flats. Purple aggregates may therefore originate in the microbial mats rather than in the pools themselves. Rapid sedimentation and high respiration rates of Chromatiaceae in the aggregates would prevent the inhibition of Bchl synthesis if aggregates were lifted off the sediment and up into the oxic pool water by tidal currents.     

Polyhydroxyalkanoate (PHA) biosynthesis from structurally unrelated carbon sources by a newly characterized Bacillus spp

A newly acquired polyhydroxyalkanoate (PHA) producing Bacillus spp. was identified to be a strain of Bacillus cereus using a range of microbiological and molecular techniques. This strain, named B. cereus SPV, was found to be capable of using a wide range of carbon sources including glucose, fructose, sucrose, various fatty acids and gluconate for the production of PHAs, an advantage for the commercial production of the polymers. The media used for the polymer production was novel in the context of the genus Bacillus. The PHA, once produced, was found to remain at a constant maximal concentration, without any degradation, a great advantage for the commercial production of the PHAs. This particular strain of Bacillus spp. was able to synthesize various PHAs with 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV) and 4-hydroxybutyrate (4HB)-like monomer units from structurally unrelated carbon sources such as fructose, sucrose and gluconate. This is the first report of the incorporation of a 4HB related monomer containing PHA by the genus Bacillus and from structurally unrelated carbon sources. The PHAs isolated had molecular weights ranging between (0.4 and 0.8) x 10(6) and low polydispersity index values (M(W)/M(N)) ranging from 2.6 to 3.4.     

A novel genetically engineered pathway for synthesis of poly(hydroxyalkanoic acids) in Escherichia coli

A new pathway to synthesize poly(hydroxyalkanoic acids) (PHA) was constructed by simultaneously expressing butyrate kinase (Buk) and phosphotransbutyrylase (Ptb) genes of Clostridium acetobutylicum and the two PHA synthase genes (phaE and phaC) of Thiocapsa pfennigii in Escherichia coli. The four genes were cloned into the BamHI and EcoRI sites of pBR322, and the resulting hybrid plasmid, pBPP1, conferred activities of all three enzymes to E. coli JM109. Cells of this recombinant strain accumulated PHAs when hydroxyfatty acids were provided as carbon sources. Homopolyesters of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), or 4-hydroxyvalerate (4HV) were obtained from each of the corresponding hydroxyfatty acids. Various copolyesters of those hydroxyfatty acids were also obtained when two of these hydroxyfatty acids were fed at equal amounts: cells fed with 3HB and 4HB accumulated a copolyester consisting of 88 mol% 3HB and 12 mol% 4HB and contributing to 68.7% of the cell dry weight. Cells fed with 3HB and 4HV accumulated a copolyester consisting of 94 mol% 3HB and 6 mol% 4HV and contributing to 64.0% of the cell dry weight. Cells fed with 3HB, 4HB, and 4HV accumulated a terpolyester consisting of 85 mol% 3HB, 13 mol% 4HB, and 2 mol% 4HV and contributing to 68.4% of the cell dry weight.     

Spectral Irradiance and Distribution of Pigments in a Highly Layered Marine Microbial Mat

The spectral irradiance from 400 to 1,100 nm was measured with depth in the intertidal sand mats at Great Sippewissett Salt Marsh, Mass. These mats contained at least four distinct layers, composed of cyanobacteria, purple sulfur bacteria containing bacteriochlorophyll a (Bchl a), purple sulfur bacteria containing Bchl b, and green sulfur bacteria. Spectral irradiance was measured directly by layering sections of mat on a cosine receptor. Irradiance was also approximated by using a calibrated fiber-optic tip. With the tip, irradiance measurements could be obtained at depth intervals less than 250 μm. The irradiance spectra were correlated qualitatively and quantitatively with the distribution of the diverse chlorophyll pigments in this mat and were compared with spectra recorded in plain sand lacking pigmented phototrophs. We found that the shorter wavelengths (400 to 550 nm) were strongly attenuated in the top 2 mm of the mat. The longer wavelengths (red and near infrared) penetrated to much greater depths, where they were attenuated by Bchl a, b, and c-containing anoxygenic phototrophic bacteria. The specific attenuation bands in the irradiance spectra correlated with the specific in vivo absorption bands of the Bchl-protein complexes in the bacteria. We concluded that the pigments in the phototrophs had a profound affect on the light environment within the mat. It seems likely that the diverse Bchl-protein complexes found in the anoxygenic phototrophs evolved in dense mat environments as a result of competition for light.     

Impact of carbon metabolism on 13C signatures of cyanobacteria and green non-sulfur-like bacteria inhabiting a microbial mat from an alkaline siliceous hot spring in Yellowstone National Park (USA)

Alkaline siliceous hot spring microbial mats in Yellowstone National Park are composed of two dominant phototropic groups, cyanobacteria and green non-sulfur-like bacteria (GNSLB). While cyanobacteria are thought to cross-feed low-molecular-weight organic compounds to support photoheterotrophic metabolism in GNSLB, it is unclear how this could lead to the heavier stable carbon isotopic signatures in GNSLB lipids compared with cyanobacterial lipids found in previous studies. The two groups of phototrophs were separated using percoll density gradient centrifugation and subsequent lipid and stable carbon isotopic analysis revealed that we obtained fractions with a approximately 60-fold enrichment in cyanobacterial and an approximately twofold enrichment in GNSLB biomass, respectively, compared with the mat itself. This technique was used to study the diel cycling and 13C content of the glucose pools in and the uptake of 13C-bicarbonate by the cyanobacteria and GNSLB, as well as the transfer of incorporated 13C from cyanobacteria to GNSLB. The results show that cyanobacteria have the highest bicarbonate uptake rates and accumulate glucose during the afternoon in full light conditions. In contrast, GNSLB have relatively higher bicarbonate uptake rates compared with cyanobacteria in the morning at low light levels. During the night GNSLB take up carbon that is likely derived through fermentation of cyanobacterial glucose enriched in 13C. The assimilation of 13C-enriched cyanobacterial carbon may thus lead to enriched 13C-contents of GNSLB cell components.     

Production of targeted poly(3-hydroxyalkanoates) copolymers by glycogen accumulating organisms using acetate as sole carbon source

One of the main limitations in bacterial polyhydroxyalkanoate (PHA) production with mixed cultures is the fact that primarily polyhydroxybutyrate (PHB) homopolymers are generated from acetate as the main carbon source, which is brittle and quite fragile. The incorporation of different 3-hydroxyalkanoate (HA) components into the polymers requires the addition of additional carbon sources, leading to extra costs and complexity. In this study, the production of poly(3-hydroxybutyrate (3HB)-co-3-hydroxyvalerate (3HV)-co-3-hydroxy-2-methylvalerate (3HMV)), with 7-35C-mol% of 3HV fractions from acetate as the only carbon source was achieved with the use of glycogen accumulating organisms (GAOs). An enriched GAO culture was obtained in a lab-scale reactor operated under alternating anaerobic and aerobic conditions with acetate fed at the beginning of the anaerobic period. The production of PHAs utilizing the enriched GAO culture was investigated under both aerobic and anaerobic conditions. A polymer content of 14-41% of dry cell weight was obtained. The PHA product accumulated by GAOs under anaerobic conditions contained a relatively constant proportion of non-3HB monomers (30+/-5C-mol%), irrespective of the amount of acetate assimilated. In contrast, under aerobic conditions, GAOs only produced 3HB monomers from acetate causing a gradually decreasing 3HV fraction during this aerobic feeding period. The PHAs were characterized by gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The data demonstrated that the copolymers possessed similar characteristics to those of commercially available poly(3HB-co-3HV) (PHBV) products. The PHAs produced under solely anaerobic conditions possessed lower melting points and crystallinity, higher molecular weights, and narrower molecular-weight distributions, compared to the aerobically produced polymers. This paper hence demonstrates the significant potential of GAOs to produce high quality polymers from a simple and cheap carbon source, contributing considerably to the growing research body on bacterial PHA production by mixed cultures.