Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

Use of Dimethylsulfoxide to Prevent Clumping during Feulgen Staining of Ceratocystis ulmi

The dimorphic fungus Ceratocystis ulmi is the causative agent of Dutch Elm Disease. As part of a study on the regulation of this developmental phenomenon, we attempted to stain the nuclei of cells growing vegetatively in the yeast phase by a modification of the Feulgen technique described by Gauger (1975). The cells were harvested by centrifugation, washed twice, and resuspended in 0.05 M phosphate buffer (pH 6.5). A small portion of this cell suspension was placed on a clean No. 2 glass coverslip (22 ± 22 mm) and allowed to air dry. The coverslip was flamed briefly to heat fix the cells whereupon they were fixed in glacial acetic acid: 95% ethanol (1:3 v/v) for one hour, hydrolyzed in 1 N hydrochloric acid at 60 C for 5 minutes, and stained for 30 minutes. The Feulgen stain was prepared according to Stevens (1974). Subsequently, the coverslip was rinsed briefly with distilled water and dehydrated for 30 seconds in 70% ethanol. After air drying, the coverslip was mounted on a glass microscope slide with Permount (Fisher Scientific Co.) and examined.     

Prefixing with Paradichlorobenzene to Facilitate Chromosome Study

A technic was developed which resulted in preparations containing many mitotic divisions with chromosomes well fixed and stained, rod-shaped, and spread throughout the cell. This technic has given good results with guayule (Parthenium argentatum), Crepis, Allium, Pisum, Lycopersicon, Tradescantia, and other plants. Material is prefixed in a saturated solution of paradichlorobenzene for 1-4 hours, fixed in 65% acetic acid (or other suitable fixative) for 12-24 hours, hydrolyzed in 10% HCl for 10-30 minutes at 60° C, rinsed in water, transferred to a drop of 45% acetic acid on a slide, and smeared and stained in aceto-orcein. The preparation may be made permanent by separating slide and cover glass in 1 part glacial acetic acid to 1 part absolute alcohol, putting them in absolute alcohol, and then recombining them with a drop of euparol.     

A Versatile Stain for Pollen Fungi, Yeast and Bacteria

A versatile stain has been developed for demonstrating pollen, fungal hyphae and spores, bacteria and yeasts. The mixture is made by compounding in the following order: ethanol, 20 ml; 1% malachite green in 95% ethanol, 2 ml; distilled water, 50 ml; glycerol, 40 ml; acid fuchsin 1% in distilled water, 10 ml; phenol, 5 g and lactic acid, 1-6 ml. A solution has also been formulated to destain overstained pollen mounts. Ideally, aborted pollen grains are stained green and nonaborted ones crimson red. Fungal hyphae and spores take a bluish purple color and host tissues green. Fungi, bacteria and yeasts are stained purple to red. The concentration of lactic acid in the stain mixture plays an important role in the differential staining of pollen. For staining fungi, bacteria and yeasts, the stain has to be acidic, but its concentration is not critical except for bacteria. In the case of pollen, staining can be done in a drop of stain on a slide or in a few drops of stain in a vial. Pollen stained in the vial can be used immediately or stored for later use. Staining is hastened by lightly flaming the slides or by storing at 55±2 C for 24 hr. Bacteria and yeasts are fixed on the slide in the usual manner and then stained. The stock solution is durable, the staining mixture is very stable and the color of the mounted specimens does not fade on prolonged storage. Slides are semipermanent and it is not necessary to ring the coverslip provided 1-2 drops of stain are added if air bubbles appear below the coverslip. The use of differentially stained pollen mounts in image analyzers for automatic counting and recording of aborted and nonaborted pollen is also discussed.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.     

Fast direct method of obtaining metaphase and prometaphase chromosomes from chorion biopsy cells and human embryos during the lst semester of pregnancy]

Samples of chorionic villi and embryonic tissues (brain, brain--sheaths) are thoroughly washed with Hank's solution, immediately subjected to hypotonic treatment (0.9% sodium citrate plus few drops of 0.01% colchicine) 37 degrees C, 30 min, prefixed 20 min with equal amount of standard fixative mixture, twice fixed in standard fixative solution (1 hour, -10 degrees C), hydrated with equal volume of distilled water (5-10 min), dried, macerated directly on the slide with 60% acetic acid. The cell suspension is then evenly spread on the slide surface, dried, postfixed and stained. The method provides sufficient amount of metaphase and prometaphase mitotic plates suitable for differentiating staining in 1.5-2 hours after sampling and might be recommended for routine chromosomal analysis in prenatal diagnosis of inherited diseases during early pregnancy.     

Differential Staining of Gastric Glandular Cells

Fundus of stomach is fixed in 10% formalin (aqueous), Bouin's fluid or 5% trichloracetic acid (aqueous). It is embedded in paraffin, and 7μ sections are cut, mounted, deparaffinized and passed to 70% alcohol and then stained as follows: Mordant 3 min. in saturated Bismarck brown in 70% alcohol. Rinse in 70% alcohol, pass to distilled water, then overstain (2 hr.) in aniline blue, 0.5% solution in 2.5% acetic acid (aqueous). Precipitate the anilin blue with 0.5 ml. of 0.1% methyl violet solution (aqueous) dropped on die slide. Leave on 2 min. or less. Wash and differentiate in 70% alcohol. (Parietal cells dark blue). Stain 30 min. in a mixture of hematein, 0.10g.; A1C13 cryst., 0.05g.; and 70% alcohol 50 ml., prepared just before use and not filtered. Rinse in 70% alcohol and differentiate with an alcoholic extract of saffron (2 g. saffron pistils in 100 ml. 90% alcohol at 60°C. for 6 hr.) while observing the progress of differentiation microscopically. Dehydrate by dropping a 0.1 % solution of acetic acid in absolute alcohol on the section for 30 sec., followed by pure absolute alcohol, xylene, and covering in balsam.     

Differential Staining of Gastric Glandular Cells

Fundus of stomach is fixed in 10% formalin (aqueous), Bouin's fluid or 5% trichloracetic acid (aqueous). It is embedded in paraffin, and 7μ sections are cut, mounted, deparaffinized and passed to 70% alcohol and then stained as follows: Mordant 3 min. in saturated Bismarck brown in 70% alcohol. Rinse in 70% alcohol, pass to distilled water, then overstain (2 hr.) in aniline blue, 0.5% solution in 2.5% acetic acid (aqueous). Precipitate the anilin blue with 0.5 ml. of 0.1% methyl violet solution (aqueous) dropped on die slide. Leave on 2 min. or less. Wash and differentiate in 70% alcohol. (Parietal cells dark blue). Stain 30 min. in a mixture of hematein, 0.10g.; A1C13 cryst., 0.05g.; and 70% alcohol 50 ml., prepared just before use and not filtered. Rinse in 70% alcohol and differentiate with an alcoholic extract of saffron (2 g. saffron pistils in 100 ml. 90% alcohol at 60°C. for 6 hr.) while observing the progress of differentiation microscopically. Dehydrate by dropping a 0.1 % solution of acetic acid in absolute alcohol on the section for 30 sec., followed by pure absolute alcohol, xylene, and covering in balsam.     

A modification of the tannic acid-phosphomolybdic acid-dye stain for demonstrating myoepithelial cells in formalin fixed tissue

A modified tannic acid-phosphomolybdic acid-dye procedure is used for staining myoepithelial cells in formalin fixed surgical and autopsy material. Paraffin sections are brought to water, mordanted for 1 hr in Bouin's fixative previously heated to 56 C, cooled while still in Bouin's, rinsed in tap water until sections are colorless, rinsed in distilled water, treated with 5% aqueous tannic acid 5-20 min, rinsed in distilled water 30 sec or less, treated with 1% aqueous phosphomolybdic acid 10-15 min, rinsed 30 sec in distilled water, rinsed in methanol, stained 1 hr in a saturated solution of amido black or phloxine B in 9:1 methanol:acetic acid, rinsed in 9:1 methanol:acetic acid, dehydrated, cleared and mounted. Myoepithelial cells of sweat, lacrimal, salivary, bronchial, and mammary glands are blue-green with amido black or pink with phloxine B. Fine processes of myoepithelial cells are well delineated. Background staining is minimal and the procedure is highly reproducible.     

An Improved Pollen Grain Smear Method for Wheat

Anthers containing actively dividing pollen grains were treated 1 hour at 18-20° C. with 0.2% solution of colchicine, washed 1 hour in water, soaked in 0.002 M aqueous solution of 8-oxyquinoline at 10-14° C. for 1 hour, washed in water for 1 hour and then fixed in Carnoy's solution (alcohol, chloroform, acetic acid, 6:3:1) for 6 hours to overnight. They were washed successively in acetic-alcohol (1:1) 10-15 minutes, 70% alcohol 10-15 minutes and in water 30 minutes before hydrolysing them in bulk in 1 N HCl at 60° C. for 10-15 minutes. “Finally, they were stained in leuco-basic fuchsin for 15-30 minutes. Pollen grains were squeezed out of a stained anther in a small drop of egg albumen on a slide and the albumen smeared uniformly on the slide. The slide was dipped successively for a few seconds in glacial acetic acid and 45% acetic acid respectively. The smear was covered by a cover glass in a drop of aceto-carmine and pressed gently between folded filter papers. The cover glass was sealed with paraffin and stored overnight. To make the preparation permanent the paraffin was removed and the cover glass separated in a 1:1 mixture of acetic acid and n-butyl alcohol. The slide and the cover glass were then passed through n-butyl alcohol, 2 changes, and finally remounted in balsam.     

Detection of Polyhedra from Insect Virus Diseases on Filter Membranes

Polyhedra filtered directly from the air or from aqueous suspensions by means of Millipore filter membranes, are stained on the membranes as follows: To a microscope slide mount consisting of a small piece of membrane filter on which the polyhedra are retained, are added 1 drop of a 1:4 dilution of saturated aqueous picric acid and 1 drop of staining solution: 0.1 gm of naphthol blue-black, C.I. 246 (Hartman-Leddon Co.) dissolved in a mixture of 98% methanol, 5; distilled water, 4 and glacial acetic acid, 1—parts by volume (Grosset et al. Proc. Soc. Exp. Biol. Med., 97, 72-7, 1958). The slide is placed on a hot plate at 600° C (dull red heat) until evaporation takes place and the filter membrane turns blue. Before the membrane begins to burn, the slide is removed and allowed to cool. For stain-sensitive polyhedra the above procedure is adequate. However, for stain-resistant polyhedra it is sometimes necessary to heat the mount with the picric acid alone, followed by the stain and a second heating. For highly resistant polyhedra it can be necessary to heat the untreated mount, follow with a second heating with double strength picric acid; and follow this with a third heating with stain. Revealing the polyhedra, stained dark lilac-blue or green blue, for bright-field illumination, is effected by clearing the membrane with media such as Euparal, aniline, linseed oil or clove oil. This method is suitable for the detection and observation of polyhedra dispersed in nature. Groups of different size can be separated by graduated pore-size filtration during concentration and purification. Enumeration and morphological studies are thereby facilitated.     

Technic for Studying Chromosome Structure

The methods described are modifications of various technics for the study of spiral structure in chromosomes. They enable permanent preparations to be made with better fixation and allow the use of stains which give clear and more critical definition. The first method described involves the use of ammonium, hydroxide (880 vols.) fumes for the treatment of pollen mother cells before fixation. Anthers of Tradescantia are smeared on a slide and wet in a 3% cane sugar solution. The preparation is then immediately placed in a dish of fixative where it remains for two hours. The slide can then be washed, bleached and stained with gentian violet or hematoxylin. It was found that fumes of nitric acid, hydrochloric acid and glacial acetic acid gave similar results. For the second method, boiling water is used for pre-treatment. A smear is made on a slide and immersed in boiling water for five to ten seconds. The smear is then fixed and treated in the usual manner.     

Collodion Membranes in Pollen Tube Technique

Membranes are formed by allowing a drop of collodion-acetone solution to come into contact with the surface of warm sugar solution in a petri dish. Pollen is germinated upon the smooth areas of the membrane when all traces of acetone have evaporated. Semipermanent preparations are made by isolating the pollinated area of the membrane, floating it onto a slide, and, after the removal of excess sugar solution, adding a drop of acetic-stain fixative, followed by an albumenized cover slip. The preparation can be made permanent by inverting a slide in a mixture of 1 part glacial acetic acid and 3 parts absolute alcohol, when the collodion membrane will dissolve and allow the cover slip and adhering grains to fall free. The cover slip is then passed through absolute alcohol (2 changes), xylene, and mounted in neutral mountant on a clean slide. By substituting a drop of the alcohol-acetic acid mixture in place of acetic-stain fixative, the grains adhering to the cover slip may be stained by the Feulgen method.     

A Pollen Grain Squash Technique for Saccharum and Related Genera

Anthers collected between 9 and 10 AM were treated for 1 hr at 26-28 C with a 0.5% solution of colchicine, washed for 2-4 min in water, placed in 0.002 M 8-hydroxyquinoline for 1 hr, washed in water for 10 min and fixed in: methanol, 60 ml; chloroform, 30 ml; distilled water, 20 ml; picric acid, 1 gm and mercuric chloride 1 gm, for 24 hr. After washing they were hydrolysed in 1 N HCl for 15 min at 60 C, stained in leuco basic fuchsin for 30 min, then smeared on a slide in a drop of acetocarmine. The slides were sealed, stored overnight, the paraffin was removed, and the slide passed through a 1:1 mixture of n-butyl alcohol and acetic acid, then through pure n-butyl alcohol and mounted in Canada balsam. The significant features of this procedure are: (1) use of chromosomes in the haploid condition for karyotype analysis, (2) better exaggeration of constrictions for easier interpretation of chromosome types and (3) good spreading in plants with a large chromosome number.     

Histochemical Use Of Lead Tetra-Acetate I. Cleavage Of 1-2 Glycols

Lead tetra-acetate acts specifically to split the carbon-carbon single bond of the 1,2-glycol linkage to produce aldehyde radicals which may then be demonstrated by means of leucofuchsin, 2,4-dinitrophenlyhydrazine, or p-nitrophenylhydrazine. Routinely prepared slide sections from tissues fixed in 10% formalin are run down to 95% alcohol, rinsed in glacial acetic acid and then treated for 2 minutes in a saturated solution of lead tetra-acetate in glacial acetic acid with 5 g. of potassium acetate added for each 100 ml. of reagent. The sections are then washed in distilled water and placed in leucofuchsin for 10 minutes, or in a saturated 30% alcoholic solution of p-nitrophenylhydrazine for 5 minutes or 2,4-dini-trophenylhydrazine for 30 minutes. After staining, the sections are rinsed in 30% alcohol if the nitrophenylhydrazines were used, or in the standard dilute sulfite bath followed by running tap water for 5 minutes if leucofuchsin were used. Sections are routinely dehydrated, cleared, and covered. On examination, the sites of 1,2-glycol linkages will be stained violet by leucofuchsin or yellow by the nitrophenylhydrazines.     

A Modification of the Tannic Acid Phosphomolybdic Acid-Dye Stain for Demonstrating Myoepithelial Cells in Formalin Fixed Tissue

A modified tannic acid-phosphomolybdic acid-dye procedure is used for staining myoepithelial cells in formalin fixed surgical and autopsy material. Paraffin section are brought to water, mordanted for 1 hr in Bouin's fixative previously heated to 56 C, cooled while still in Bouin's, rinsed in tap water until sections are colorless, rinsed in distilled water, treated with 5% aqueous tannic acid 5-20 min, rinsed in distilled water 30 sec or less, treated with 1% aqueous phosphomolybdic acid 10-15 min, rinsed 30 sec in distilled water, rinsed in methanol, stained 1 hr in a saturated solution of amido black or phloxine B in 9:l methanol:acetic acid, rinsed in 9:l methanol:acetic acid, dehydrated, cleared and mounted. Myoepithelial cells of sweat, lacrimal, salivary, bronchial, and mammary glands are blue-green with amido black or pink with phloxine B. Fine processes of myoepithelial cells are well delineated. Background staining is minimal and the procedure is highly reproducible.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Culture And Staining of Pollen Grains of Ricinus communis

Germinating and growing pollen grains (male gametophytes) of Ricinus communis L. in liquid culture is achieved as follows: Pollen is collected over a 10-15 min period from mature anther clusters which have been removed from the male flowers and which have been kept at 25° C and 40-60% relative humidity. Samples weighing between 2.5 and 5.0 mg are brought as quickly as possible into a Desicote treated vial containing 17% sucrose and 30 ppm H₃BO₃ in boiled distilled water. The proportion (w/v) of pollen to culture solution should be 1:100. Shed pollen is kept in a humidity chamber whenever it is not being handled. The air in the culture vial is replaced by O₂ at the pressure of 1 atmosphere plus 5 lb and the sealed vials are shaken gently for 8-10 hr while partially immersed in a waterbath kept at 30° C. The pollen is fixed by the addition to the incubation suspension of an absolute alcohol-lactic acid (4:1) fixing fluid. The proportion used is 36 parts of fixing fluid to 1 part of culture solution. The fixed pollen can be stored in the fixative. Smears are prepared by applying single drops of the constantly agitated suspension of fixed pollen to a microscope slide. After each drop has spread out and dried, an additional drop is added until 10-20 have been applied. The preparations are stained by adding a drop of 1% acetic-orcein and are sealed with fingernail lacquer. The method is well adapted to the following types of studies: pollen germination, physiology of pollen tube growth, morphology of the male gametocyte, and physiology and cytology of the generative cell and nucleus.     

Selective Staining of Neurosecretory Material in Semithin Epoxy Sections by Gomori's Aldehyde Fuchsin

The epoxy resin was removed from semithin (1 μm) sections by immersing them for 30 sec in sodium methoxide (Mayor et al., J. Biophys. Biochem. Cytol., 9: 909-10, 1961) and then processed as follows: (1) left for 1-3 hr at 60 C in a mixture of formalin, 25 ml; glacial acetic acid, 5 ml; CrO₃, 3 gm; and distilled water, 75 ml: (2) oxidized 10 min in a 1:1:6 v/v mixture of 2.5% KMnO₄, 5% H₂SO₄ and distilled water: (3) bleached in 1% oxalic acid, and (4) stained for 15 min in aldehyde fuchsin, 0.125% in 70% alcohol, or in a 1% aqueous solution of toluidine blue. The neurosecretory material is selectively stained.     

Chromosome Preparations from Mouse Embryos During Early Organogenesis: Dissociation After Fixation, Followed by Air Drying

Embryos are put into 1% sodium citrate at 37 C; 7- and 8-day specimens requiring about 20 min. With increasing age, the duration of treatment is increased up to 50 min. Handling is facilitated by keeping specimens in a small glass vessel for observation under a binocular microscope, and by changing fluids with a fine-tipped pipette. Fixation in ethanol-acetic acid 3:l for 2-3 hr is uncritical, as material may be stored in the fixative overnight at 4 C. Staining in toto with 2% orcein in 50% acetic acid follows, requiring 0.5-1 hr (storage in this solution up to 2 wk at 4 C is permssible). After staining, specimens are subjected to cellular dissociation in a mixture of glacial acetic and 50% lactic acid, the action of which is controlled by the duration of treatment and by increasing the ratio of lactic to acetic from 1:Z (younger embryos) to 3:2 (older embryos). Only 1-3 drops of the dissociating fluid is used for each embryo, to favor concentration of the free-floating cells. Since the time required varies from several minutes to nearly an hour, the most favorable degree of dissociation can best be judged by the cloudiness produced in the dissociating fluid. A small drop not exceeding 2 mm in diameter, of the cell suspension, is placed on a slide and followed immediately by a normal-sized drop of fresh 3:1 ethanol-acetic. After drying, the chromosomes are stained with lactic-acetic-orcein or other suitable stain. The method gives satisfactory results with embryos from the 7th to 11th day of pregnancy.