Bulged-out nucleotides in an antisense RNA are required for rapid target RNA binding in vitro and inhibition in vivo.

Naturally occurring antisense RNAs in prokaryotes are generally short, highly structured and untranslated. Stem-loops are always present, and loop regions serve as primary recognition structures in most cases. Single-stranded tails or internal unstructured regions are required for initiation of stable pairing between antisense and target RNA. Most antisense RNAs contain bulged-out nucleotides or small internal loops in upper stem regions. Here we investigated the role of the bulged-out nucleotides of CopA (the copy number regulator of plasmid R1) in determining the binding properties of this antisense RNA to its target in vitro and the efficiency of a translational inhibition in vivo. The introduction of perfect helicity in the region of the two bulges in CopA decreased pairing rate constants by up to 180-fold, increased equilibrium dissociation constants of the 'kissing intermediate' up to 14-fold, and severely impaired inhibition of repA expression. A previously described loop size mutant of CopA showed decreased pairing rates, but, in contrast to the bulge-less mutant CopAs, shows a decreased dissociation constant of the 'kissing complex'. We conclude that removal of the specific bulges/internal loops within the stem-loop II of CopA impairs the inhibitor, and that creation of an internal loop at a different position does not restore activity, emphasizing the optimal folding of wild-type CopA. The accompanying paper shows that an additional function of bulges can be protection from RNase III cleavage.     

Introduction of an RNA stability element at the 5'-end of an antisense RNA cassette increases the inhibition of target RNA translation

This communication describes improvement strategies used on a previously described two-unit antisense RNA cassette system. This cassette system encodes RNA with noncontiguous regions of complementarity to a bacterial target RNA, lacI mRNA. One of the units of complementarity was contained within an RNA stem-loop resembling that of the very efficient, naturally occurring antisense RNA CopA. As relatively low inhibitory activity was obtained previously, we tested variants in which several stem-loops were combined within one RNA, each of them directed against a different stretch of target RNA. One to four stem-loop RNAs were tested and found to be relatively ineffective, likely because of low metabolic stability. To increase the intracellular stability of these and other antisense RNAs, a stabilizer element (stem-loop derived from gene 32 mRNA of phage T4) was inserted at their 5'-ends. The results indicate that addition of this element indeed increased antisense RNA efficiency in vivo. As expected, this effect was primarily due to a longer antisense RNA half-life, as shown by RNA abundance (Northern analysis) and decay rates (rifampicin runout experiments). In summary, the results reported indicate that rational design of antisense RNA is feasible, but that the degree of inhibition (approximately 75% maximum inhibition) accomplished here could still be improved.     

Bulged-out nucleotides protect an antisense RNA from RNase III cleavage.

Bulged-out nucleotides or internal loops are present in the stem-loop structures of several antisense RNAs. We have used the antisense/target RNA system (CopA/CopT) that controls the copy number of plasmid R1 to examine the possible biological function of bulged-out nucleotides. Two regions within the major stem-loop of the antisense RNA, CopA, carry bulged-out nucleotides. Base pairing in either one or both of these regions of the stem was restored by site-specific mutagenesis and in one case a new internal loop was introduced. The set of mutant and wild-type CopA variants was characterized structurally in vitro. The results reported here indicate a possible function of the bulges: their presence protects CopA RNA from being a substrate for the double-strand-specific enzyme RNase III. In vitro cleavage rates were drastically increased when either the lower or both bulges were absent. This is paralleled by a similar, but not identical, effect of the bulges on metabolic stability of the CopA RNAs in vivo. The degradation pathways of wild-type and mutant CopA in various strain backgrounds are discussed. In the accompanying paper, we address the significance of bulges in CopA for binding to the target RNA in vitro and for its inhibitory efficiency in vivo.     

A two unit antisense RNA cassette test system for silencing of target genes.

This communication describes a two unit antisense RNA cassette system for use in gene silencing. Cassettes consist of a recognition unit and an inhibitory unit which are transcribed into a single RNA that carries sequences of non-contiguous complementarity to the chosen target RNA. The recognition unit is designed as a stem-loop for rapid formation of long- lived binding intermediates with target sequences and resembles the major stem-loop of a naturally occurring antisense RNA, CopA. The inhibitory unit consists of either a sequence complementary to a ribosome binding site or of a hairpin ribozyme targeted at a site within the chosen mRNA. The contributions of the individual units to inhibition was assessed using the lacI gene as a target. All possible combinations of recognition and inhibitory units were tested in either orientation. In general, inhibition of lacI expression was relatively low. Fifty per cent inhibition was obtained with the most effective of the constructs, carrying the recognition stem-loop in the antisense orientation and the inhibitory unit with an anti-RBS sequence. Several experiments were performed to assess activities of the RNAs in vitro and in vivo : antisense RNA binding assays, cleavage assays, secondary structure analysis as well as Northern blotting and primer extension analysis of antisense and target RNAs. The problems associated with this antisense RNA approach as well as its potential are discussed with respect to possible optimization strategies.     

Identification of antisense RNA stem–loops that inhibit RNA–protein interactions using a bacterial reporter system

Many well-characterized examples of antisense RNAs from prokaryotic systems involve hybridization of the looped regions of stem–loop RNAs, presumably due to the high thermodynamic stability of the resulting loop–loop and loop–linear interactions. In this study, the identification of RNA stem–loops that inhibit U1A protein binding to the hpII RNA through RNA–RNA interactions was attempted using a bacterial reporter system based on phage λ N-mediated antitermination. As a result, loop sequences possessing 7–8 base complementarity to the 5′ region of the boxA element important for functional antitermination complex formation, but not the U1 hpII loop, were identified. In vitro and in vivo mutational analysis strongly suggested that the selected loop sequences were binding to the boxA region, and that the structure of the antisense stem–loop was important for optimal inhibitory activity. Next, in an attempt to demonstrate the ability to inhibit the interaction between the U1A protein and the hpII RNA, the rational design of an RNA stem–loop that inhibits U1A-binding to a modified hpII was carried out. Moderate inhibitory activity was observed, showing that it is possible to design and select antisense RNA stem–loops that disrupt various types of RNA–protein interactions.     

Rapid evaluation in Escherichia coli of antisense RNAs and ribozymes

The characterization of a simple bacterial system using commercially available plasmids and strains, developed to assess the effectiveness of trans- acting (antisense RNA and ribozymes) RNA in Escherichia coli , is reported. This system was used to test various trans- acting RNA molecules against the expression of the I factor, a functional transposable element from Drosophila melanogaster . For this target, results indicate that antisense RNA efficiency depends on the hybridization length between sense and antisense RNA. The introduction of a single hammerhead ribozyme within the antisense RNAs does not increase its inhibitory activity. These predictions were subsequently confirmed in Drosophila melanogaster .     

Loop swapping in an antisense RNA/target RNA pair changes directionality of helix progression

The binding pathway of the natural antisense RNA CopA to its target CopT proceeds through a hierarchical order of steps. It initiates by reversible loop-loop contacts followed by unidirectional helix progression into the upper stems. This involves extensive breakage of intramolecular base pairs and the subsequent formation of two intermolecular helices, B and B'. Based on the known tRNA anticodon loop structure and on results from the Sok/Hok antisense/target RNA system, it had been suggested that a U-turn (or pi-turn) in the loop of CopT might determine the directionality of helix progression. Data presented here show that the putative U-turn is one of the structural elements of antisense/target RNA pairs required to achieve fast binding kinetics. Swapping of the hypothetical U-turn structure from the target RNA to the antisense RNA retained regulatory performance in vivo and binding rates in vitro but altered the binding pathway by changing the direction in which the initiating helix was extended. In addition, our data indicate that a helical stem immediately adjacent to the target loop sequence is required to provide a scaffold for the U-turn.     

Naturally occurring antisense RNA control--a brief review

Biological control by naturally occurring anti-sense RNAs has been documented in a number of prokaryotic cases, and strongly suggested in several eukaryotic systems. The biological activities controlled are diverse, including transposition, phage development, chromosomal gene expression, and plasmid replication, compatibility and conjugation. Control is exerted at many different levels, by both direct and long-range effects. The stem/loop structures common to all anti-sense RNAs are important functional domains: loops are the sites of critical interactions in the initiation of pairing to the target RNA; stems determine anti-sense RNA stability in vivo. These features need to be considered in the design of artificial anti-sense RNA control. Details of RNA/RNA pairing have emerged; pairing initiates at single-stranded regions in anti-sense RNA loops, and stable complex formation involves the nearby end of one or both molecules.     

Regulation of gene expression by trans-encoded antisense RNAs

Members of a class of antisense RNAs are encoded by genes that are located at loci other than those of their target genes. Three examples of antisense RNA genes are discussed here. micF is found in Escherichia coli and other bacteria and functions to control outer membrane protein F levels in response to environmental stimuli. dicF is also found in E. coli and is involved in the regulation of cell division, lin-4 is found in the nematode Caenorhabditis elegans and functions during larval development. Nucleotide sequences of at least two of these genes appear to be phylogenetically conserved. The trans-encoded antisense RNAs are small RNAs which display only partial complementarity to their target RNAs. Models for RNA/RNA interactions have been proposed. It is possible that currently known unlinked antisense RNA genes are part of a larger class of heretofore undiscovered regulatory RNA genes. Possible ways of detecting other unlinked antisense RNA genes are discussed.     

Viral escape from antisense RNA

RNA coliphage SP was propagated for several generations on a host expressing an inhibitory antisense RNA complementary to bases 31–270 of the positive-stranded genome. Phages evolved that escaped inhibition. Typically, these escape mutants contained 3–4 base substitutions, but different sequences were observed among different isolates. The mutations were located within three different types of structural features within the predicted secondary structure of SP genomic RNA: (i) hairpin loops; (ii) hairpin stems; and (iii) the 5' region of the phage genome complementary to the antisense molecule. Computer modelling of the mutant genomic RNAs showed that all of the substitutions within hairpin stems improved the Watson–Crick pairing of the stem. No major structural rearrangements were predicted for any of the mutant genomes, and most substitutions in coding regions did not alter the amino acid sequence. Although the evolved phage populations were polymorphic for substitutions, many substitutions appeared independently in two selected lines. The creation of a new, perfect, antisense RNA against an escape mutant resulted in the inhibition of that mutant but not of other escape mutants nor of the ancestral, unevolved phage. Thus, at least in this system, a population of viruses that evolved to escape from a single antisense RNA would require a cocktail of several antisense RNAs for inhibition.     

Bulged residues promote the progression of a loop-loop interaction to a stable and inhibitory antisense-target RNA complex

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. These RNAs are characterized by a long hairpin structure interrupted by several unpaired residues or bulged loops. In plasmid R1, the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by a four-way junction structure and a side-by-side helical alignment. This topology facilitates the formation of a stabilizer intermolecular helix between distal regions of both RNAs, essential for in vivo control. The bulged residues in CopA/CopT were shown to be required for high in vitro binding rate and in vivo activity. This study addresses the question of why removal of bulged nucleotides blocks stable complex formation. Structure mapping, modification interference, and molecular modeling of bulged-less mutant CopA–CopT complexes suggests that, subsequent to loop–loop contact, helix propagation is prevented. Instead, a fully base paired loop–loop interaction is formed, inducing a continuous stacking of three helices. Consequently, the stabilizer helix cannot be formed, and stable complex formation is blocked. In contrast to the four-way junction topology, the loop–loop interaction alone failed to prevent ribosome binding at its loading site and, thus, inhibition of RepA translation was alleviated.     

Characterizing the structural features of RNA/RNA interactions of the F-plasmid FinOP fertility inhibition system

F-like plasmid transfer is mediated by the FinOP fertility inhibition system. Expression of the F positive regulatory protein, TraJ, is controlled by the action of the antisense RNA, FinP, and the RNA-binding protein FinO. FinO binds to and protects FinP from degradation and promotes duplex formation between FinP and traJ mRNA, leading to repression of both traJ expression and conjugative F transfer. FinP antisense RNA secondary structure is composed of two stem-loops separated by a 4-base single-stranded spacer and flanked on each side by single-stranded tails. Here we show that disruption of the expected Watson-Crick base pairing between the loops of FinP stem-loop I and its cognate RNA binding partner, traJ mRNA stem-loop Ic, led to a moderate reduction in the rate of duplex formation in vitro. In vivo, alterations of the anti-ribosome binding site region in the loop of FinP stem-loop I reduced the ability of the mutant FinP to mediate fertility inhibition and to inhibit TraJ expression when expressed in trans at an elevated copy number. Alterations of intermolecular complementarity between the stems of these RNAs reduced the rate of duplex formation. Our results suggest that successful interaction between stem-loop I of FinP and stem-loop Ic of traJ mRNA requires that base pairing must proceed from an initial loop-loop interaction through the top portion of the stems for stable duplex formation to occur.     

Effects of variations in length of hammerhead ribozyme antisense arms upon the cleavage of longer RNA substrates.

The efficacy of intracellular binding of hammerhead ribozyme to its cleavage site in target RNA is a major requirement for its use as a therapeutic agent. Such efficacy can be influenced by several factors, such as the length of the ribozyme antisense arms and mRNA secondary structures. Analysis of various IL-2 hammerhead ribozymes having different antisense arms but directed to the same site predicts that the hammerhead ribozyme target site is present within a double-stranded region that is flanked by single-stranded loops. Extension of the low cleaving hammerhead ribozyme antisense arms by nucleotides that base pair with the single-stranded regions facilitated the hammerhead ribozyme binding to longer RNA substrates (e.g. mRNA). In addition, a correlation between the in vitro and intracellular results was also found. Thus, the present study would facilitate the design of hammerhead ribozymes directed against higher order structured sites. Further, it emphasises the importance of detailed structural investigations of hammerhead ribozyme full-length target RNAs.     

Real time kinetic studies of the interaction between folded antisense and target RNAs using surface plasmon resonance

Antisense RNAs interact with their complementary target RNAs as folded structures. The formation of early binding intermediates is the most important step in determining the overall rates of stable complex formation in vitro and the efficiency of control in vivo. In the case of CopA and CopT (antisense/target RNA pair of plasmid R1), recent studies have identified a four-way junction structure as the major binding intermediate. Previously, the kinetics of antisense/target RNA interaction was studied by indirect methods. Here we have used surface plasmon resonance to follow the binding of CopI (a truncated variant of CopA) to CopT in real time. A protocol was developed that permitted the determination of association and dissociation rate constants for wild-type and mutant CopI-CopT pairs. The K(D)-values calculated from these rate constants were in good agreement with the results obtained by indirect methods. In comparison to earlier model studies of interactions between simple complementary nucleic acids, we observe a different temperature dependence for dissociation rate constants. This may be indicative of the complexity of the steps required for interacting folded RNAs; intramolecular structure competes with intermolecular helix progression during complex formation. The association rate constants were not significantly dependent on temperature. The analysis presented shows that the stability of a kissing complex is not the primary determinant of the rate of stable CopA/CopT complex formation.