Functionalizing electrospun fibers with biologically relevant macromolecules

The development of functionalized polymers that can elicit specific biological responses is of great interest in the biomedical community, as well as the development of methods to fabricate these biologically functionalized polymers. For example, the generation of fibrous matrices with biological properties and fiber diameters commensurate with those of the natural extracellular matrix (ECM) may permit the development of novel materials for use in wound healing or tissue engineering. The goal of this work is, therefore, to create a biologically active functionalized electrospun matrix to permit immobilization and long-term delivery of growth factors. In this work, poly(ethylene glycol) functionalized with low molecular weight heparin (PEG-LMWH) was fabricated into fibers for possible use in drug delivery, tissue engineering, or wound repair applications. Electrospinning was chosen to process the LMWH into fiber form due to the small fiber diameters and high degree of porosity that can be obtained relatively quickly and using small amounts of starting material. Both free LMWH and PEG-LMWH were investigated for their ability to be incorporated into electrospun fibers. Each of the samples were mixed with a carrier polymer consisting of either a 10 wt % poly(ethylene oxide) (PEO) or 45 wt % poly(lactide-co-glycolide) (PLGA). Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDX), UV-vis spectroscopy, and multiphoton microscopy were used to characterize the electrospun matrices. The incorporation of heparin into the electrospun PEO and PLGA fibers did not affect the surface morphology or fiber diameters. The fibers produced had diameters ranging from approximately 100 to 400 nm. Toluidine blue assays of heparin suggest that it can be incorporated into an electrospun matrix at concentrations ranging from 3.5 to 85 mug per milligram of electrospun fibers. Multiphoton microscopy confirmed that incorporation of PEG-LMWH into the matrix permits retention of the heparin for at least 14 days. Improvements in the binding of basic fibroblast growth factor to the electrospun fibers were also observed for fibers functionalized with PEG-LMWH over those functionalized with LMWH alone. The combination of these results suggests the utility for producing electrospun fibers that are appropriately functionalized for use in biomaterials applications.     

Thiosugars: new perspectives regarding availability and potential biochemical and medicinal applications

Thiosugars, containing a sulfur atom as heteroatom or a disaccharide linked via a sulfur bridge, possess unique physicochemical properties such as water solubility, which differs from conventional functionalized monosaccharides. The differences in biological activities between thiosugars and their oxygen analogs depend on geometric, conformational, and flexibility differences. They depend also on their electronic differences, the sulfide function being less electronegative and more polarizable than the ethereal moiety. Many functionalized thiosugars occur naturally and are potential targets for the development of carbohydrate-based therapeutics. Among the few new examples of the potential new targets are salacinol and kotalanol, tagetitoxin, thiolactomycin and analogues, mycothiol and analogues, and S-nitrosothiols. These new developments and representative examples of functionalized thiosugar prototypes as potential new targets are presented in this mini review.     

Assessment of in vitro bioactivity of hyaluronic acid and sulfated hyaluronic acid functionalized electroactive polymer

Electrically conductive polypyrrole (PPY) was surface functionalized with hyaluronic acid (HA) and sulfated hyaluronic acid (SHA) to improve its surface biocompatibility. The immobilization of HA on the PPY film was facilitated by the use of a cross-linker having the appropriate functional groups. The biological activity of the HA functionalized PPY film was assessed by means of an in vitro PC12 cell culture. The cell attachment on different substrates was studied and determined by bicinchoninic acid protein analysis. Cell attachment on the HA functionalized PPY film surface was significantly enhanced in the presence of nerve growth factor. The SHA functionalized PPY film was obtained by the sulfonation of the immobilized HA using pyridinesulfonate. The retention of the biological activity of the immobilized HA after sulfonation was evaluated by the in vitro assessment of the plasma recalcification time (PRT) and platelet adhesion on the substrate. The PRT observed from the SHA functionalized PPY film was significantly prolonged compared with the HA functionalized PPY. Some reduction of platelet adhesion was observed for the SHA functionalized PPY film, compared with that of the HA functionalized PPY film.     

LyP-1-fMWNTs enhanced targeted delivery of MBD1siRNA to pancreatic cancer cells

Functionalized multi-walled carbon nanotubes have been extensively gained popularity in pancreatic cancer gene therapy. LyP-1, a peptide, has been proved to specifically bind pancreatic cancer cells. The potential therapeutic effect of LyP-1–conjugated functionalized multi-walled carbon nanotubes in treating pancreatic cancer is still unknown. In this study, LyP-1–conjugated functionalized multi-walled carbon nanotubes were successfully synthesized, characterized and showed satisfactory size distribution and zeta potential. Compared with functionalized multi-walled carbon nanotubes, cellular uptake of LyP-1–functionalized multi-walled carbon nanotubes was shown to be increased. Compound of LyP-1–functionalized multi-walled carbon nanotubes and MBD1siRNA showed superior gene transfection efficiency. Moreover, LyP-1-fMWNTs/MBD1siRNA complex could significantly decrease the viability and proliferation and promoted apoptosis of pancreatic cancer cells in vitro. Further xenograft assays revealed that the tumour burden in the nude mice injected with LyP-1–functionalized multi-walled carbon nanotubes/MBD1siRNA was significantly relieved. The study demonstrated that LyP-1–functionalized multi-walled carbon nanotubes/MBD1siRNA could be a promising candidate for tumour active targeting therapy in pancreatic cancer.     

Screening of the structural,topological, and electronic properties of the functionalized Graphene nanosheets as potential Tegafur anticancer drug carriers using DFT method

In the present work, we apply comprehensive theoretical calculations in order to study Tegafur drug adsorption on the nanostructured functionalized Graphene with hydroxyl, epoxide, carbonyl, and carboxyl groups in the water environment. The physical nature of Tegafur adsorption offers advantages in terms of easy desorption of anticancer molecule with no structural or electronic change of the adsorbed drug. By functionalization of Graphene nanosheet with a carbonyl group, a considerable increase on the binding energy between Tegafur drug and the nanosheet is noted. Diminish in energy gap with the adsorption of Tegafur drug on the functionalized nanosheets shows that the reactivity of functionalized complexes increases upon loading of the drug molecule. Besides, the adsorption process yields an increase of the polarity which causes the possibility of the solubility and dispersion of the considered complexes enhances. This result is indicative the suitability of the nanomaterials toward Tegafur drug delivery within the biological environments. The high solvation energy of Tegafur anticancer drug adsorbed functionalized Graphene models enforced their applicability as nanocarriers in the living system. These results are extremely relevant that the chemical modi?cation of Graphene nanosheet using covalent functionalization scheme is an effectual approach for loading and delivery of Tegafur drug molecule within biological systems.     

MRI detection of thrombin with aptamer functionalized superparamagnetic iron oxide nanoparticles

Design of smart MRI contrast agent based on superparamagnetic iron oxide nanoparticles and aptamers has been described for the detection of human alpha-thrombin protein. The contrast agent is based on the assembly of the aptamer functionalized nanoparticles in the presence of thrombin. A detectable change in MRI signal is observed with 25 nM thrombin in human serum. Changes were neither observed with control analytes, streptavidin, or bovine serum albumin, nor with inactive aptamer functionalized nanoparticles.     

Arginine functionalization of hydrogels for heparin binding—a supramolecular approach to developing a pro‐angiogenic biomaterial

Our aim was to synthesize a biomaterial that stimulates angiogenesis for tissue engineering applications by exploiting the ability of heparin to bind and release vascular endothelial growth factor (VEGF). The approach adopted involved modification of a hydrogel with positively charged peptides (oligolysine or oligoarginine) to achieve heparin binding. Precursor hydrogels were produced from copolymerization of N‐vinyl pyrolidone, diethylene glycol bis allyl carbonate and acrylic acid (PNDA) and functionalized after activation of the carboxylic acid groups with trilysine or triarginine peptides (PNDKKK and PNDRRR). Both hydrogels were shown to bind and release bioactive VEGF165 with arginine‐modified hydrogel outperforming the lysine‐modified hydrogel. Cytocompatibility of the hydrogels was confirmed in vitro with primary human dermal fibroblasts and human dermal microvascular endothelial cells (HUDMECs). Proliferation of HUDMECs was stimulated by triarginine‐functionalized hydrogels, and to a lesser extent by lysine functionalized hydrogels once loaded with heparin and VEGF. The data suggests that heparin‐binding hydrogels provide a promising approach to a pro‐angiogenic biomaterial. Biotechnol. Bioeng. 2013; 110: 296–317. © 2012 Wiley Periodicals, Inc.     

综述——基于纳米材料的生物检测与医学诊断技术：功能化量子点在肿瘤活体成像中的应用

量子点表面经生物分子或药物分子修饰而具有生物功能．功能化量子点具有独特的光学性质和生物相容性,在生物医学光学诊断和治疗领域具有广泛的应用．本文简要介绍了功能化量子点制备及修饰方法,综合评述了量子点在肿瘤活体诊断和治疗中的应用,包括活体淋巴结成像、血管动态成像、肿瘤成像和抗肿瘤药物示踪等,讨论了功能化量子点在肿瘤活体诊断和治疗中的应用前景以及面临的挑战．     

Synthesis and applications of alkylated C-sugars as peptide bioconjugates

Summary Permethylated C-sugars affect the stability and solubility of their carbohydrate precursors and may represent an important group of bioconjugates. When properly functionalized, these units can be appended to the N- and C-termini or to the side chains of peptides or other therapeutic candidates. In this report, we describe the synthesis of an amine-functionalized alkylated mannose derivative and confirm the configuration by determining the X-ray crystal structure of its nitrile precursor. An acid functionalized counterpart, when attached to the N-terminus of a NR box peptide analog, improved binding to estrogen receptor β (ERβ) but not to ERα.     

Chemical modifications of the N-methyl-laudanosine scaffold point to new directions for SK channels exploration

An asparagine or a histidine are present in a similar position in the outer pore region of SK2 and SK3 channels, respectively. Therefore, this structural difference was targeted in order to develop selective blockers of SK channel subtypes. Following docking investigations, based on theoretical models of truncated SK2 and SK3 channels, the benzyl side chain of N-methyl-laudanosine (NML) was functionalized in order to target this specific amino-acid residues. Chiral butanamide and benzyloxy analogues were prepared, resolved and tested for their affinity for SK2 and SK3 channels. Isoquinolinium (NMIQ) derivatives have a higher affinity for both SK channel subtypes than the corresponding derivative with no functionalized side chain. This trend was observed also for the 1,2,3,4-tetrahydroisoquinoline (THIQ) analogues. A benzyloxy functionalized NML enantiomer has a higher affinity than NML stereoisomers. Otherwise, the conserved affinity of these analogues led to the opportunity to further investigate in terms of possible labeling for in vivo investigations of the role of SK channels.     

Control of protein adsorption on functionalized electrospun fibers

Electrospun fibers that are protein resistant and functionalized with bioactive signals were produced by solution electrospinning amphiphilic block copolymers. Poly (ethylene glycol)-block-poly(D,L-lactide) (PEG-b-PDLLA) was synthesized in two steps, with a PEG segment of 10 kDa, while the PDLLA block ranged from 20 to 60 kDa. Depending on the PEG and PDLLA segment ratio, as well as solvent selection, the hydrophilicity and protein adsorption could be altered on the electrospun mesh. Furthermore, an alpha-acetal PEG-b-PDLLA was synthesized that allowed the conjugation of active molecules, resulting in surface functionalization of the electrospun fiber. Electrospun material with varying morphologies and diameter were electrospun from 10, 20, and 30 wt.% solutions. Sessile drop measurements showed a reduction in the contact angle from 120 degrees for pure poly(D,L-lactide) with increasing PEG/PDLLA ratio. All electrospun block PEG-b-PDLLA fibers had hydrophilic properties, with contact angles below 45 degrees . The fibers were collected onto six-arm star-poly(ethylene glycol) (star-PEG) coated silicon wafers and incubated with fluorescently labeled proteins. All PEG-b-PDLLA fibers showed no detectable adsorption of bovine serum albumin (BSA) independent of their composition while a dependence between hydrophobic block length was observed for streptavidin adsorption. Fibers of block copolymers with PDLLA blocks smaller than 39 kDa showed no adsorption of BSA or streptavidin, indicating good non-fouling properties. Fibers were surface functionalized with N(epsilon)-(+)-biotinyl-L-lysine (biocytin) or RGD peptide by attaching the molecule to the PEG block during synthesis. Protein adsorption measurements, and the controlled interaction of biocytin with fluorescently labeled streptavidin, showed that the electrospun fibers were both resistant to protein adsorption and are functionalized. Fibroblast adhesion was contrasting between the unfunctionalized and RGD-coupled electrospun fabrics, confirming that the surface of the fibers was functionalized. The PEG-b-PDLLA surface functionalized electrospun fibers are promising substrates for controlling cell-material interactions, particularly for tissue-engineering applications.     

Functionalization of gold and glass surfaces with magnetic nanoparticles using biomolecular interactions

Advances in nanotechnology have enabled the production and characterization of magnetic particles with nanometer-sized features that can be functionalized with biological recognition elements for numerous applications in biotechnology. In the present study, the synthesis of and interactions between self-assembled monolayers (SAMs) on gold and glass surfaces and functionalized magnetic nanoparticles have been characterized. Immobilization of 10-15 nm streptavidin-functionalized nanoparticles to biotinylated gold and glass surfaces was achieved by the strong interactions between biotin and streptavidin. Fluorescent streptavidin-functionalized nanoparticles, biotinylated surfaces, and combinations of the two were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electron and fluorescent microscopy to confirm that little or no functionalization occurred in nonbiotinylated regions of the gold and glass surfaces compared to the biotinylated sites. Together these techniques have potential use in studying the modification and behavior of functionalized nanoparticles on surfaces in biosensing and other applications.     

A direct detection of Escherichia coli genomic DNA using gold nanoprobes

Background

Electrospun nanofibers have been widely used as substrata for mammalian cell culture owing to their structural similarity to natural extracellular matrices. Structurally consistent electrospun nanofibers can be produced with synthetic polymers but require chemical modification to graft cell-adhesive molecules to make the nanofibers functional. Development of a facile method of grafting functional molecules on the nanofibers will contribute to the production of diverse cell type-specific nanofiber substrata.

Results

Small molecules, peptides, and functionalized gold nanoparticles were successfully incorporated with polymethylglutarimide (PMGI) nanofibers through electrospinning. The PMGI nanofibers functionalized by the grafted AuNPs, which were labeled with cell-adhesive peptides, enhanced HeLa cell attachment and potentiated cardiomyocyte differentiation of human pluripotent stem cells.

Conclusions

PMGI nanofibers can be functionalized simply by co-electrospinning with the grafting materials. In addition, grafting functionalized AuNPs enable high-density localization of the cell-adhesive peptides on the nanofiber. The results of the present study suggest that more cell type-specific synthetic substrata can be fabricated with molecule-doped nanofibers, in which diverse functional molecules are grafted alone or in combination with other molecules at different concentrations.     

Selective Isolation of Glycoproteins and Glycopeptides for MALDI-TOF MS Detection Supported by Magnetic Particles

Glycosylation is the most common form of posttranslational modification of proteins (50–80%). The isolation, discovery, and subsequent identification of glycosylated peptides and proteins is becoming more and more important in glycoproteomics and diagnosis. MALDI-TOF mass spectrometry is an ideal technique for identifying peptides and proteins and their corresponding modifications. The enrichment of glycosylated peptides and proteins from different sources can be attained by affinity chromatography supported by functionalized magnetic particles. Covalent coating of magnetic beads with Concanavalin A (ConA) and diboronic acid was performed by carbodiimide and poly-glutaraldehyde methods, respectively. The functionalized beads were employed to establish and optimize protocols for the binding and detection of glycosylated peptides and proteins with respect to an automated workflow and the subsequent detection and identification by MALDI-TOF mass spectrometry. For several model proteins, the capture and identification could be demonstrated by SDS-PAGE and MALDI-TOF mass spectrometry. According to the type of glycosylation (high man-nose, hybrid, or complex type) the different proteins were enriched by ConA or boronic acid–functionalized beads.     

Polypeptide fluoroacetate derivatives. Synthesis and 19F n.m.r

The synthesis and characterization of monofluoroacetyl (MFAc) functionalized haptens are described. These were covalently bound to polypeptide carriers (bovine serum albumin and poly-D-lysine) by primary amine/succinimide ester or primary amine/acid chloride coupling. Epitopic densities of the resulting antigens were determined by both 19F n.m.r. and picryl sulfonic acid assays. 19F n.m.r. experiments defining the stability of MFAc ester and amide linkages as a function of media (including in vitro), time, and temperature are presented. These results indicate that MFAc functionalized antigens are well suited for further immunologic studies.     

"Clickable" nanoparticles for targeted imaging

Nanomaterials functionalized with targeting ligands are increasingly recognized as useful materials for molecular imaging and drug delivery. Here we describe the development and validation of azide-alkyne reactions ("click chemistry") for the rapid, site-specific modification of nanoparticles with small molecules. The facile preparation of stable nanoparticles bearing azido or alkyne groups capable of reaction with their corresponding counterpart functionalized small molecules is demonstrated. The Cu(I)-catalyzed cycloaddition of azides and alkynes is shown to be a highly efficient and selective method for point functionalization of magnetic nanoparticles. Derivatized nanoparticles bearing biotin, fluorochrome, or steroid moieties are stable for several months. Nanoparticle click chemistry will be useful for other nanomaterials, design of novel sensors, and drug delivery vehicles.     

Synthesis, physico-chemical properties and complexing abilities of new amphiphilic ligands from d-galacturonic acid

This paper describes a convenient and efficient synthesis of new complexing surfactants from d-galacturonic acid and n-octanol as renewable raw materials in a two-step sequence. In the first step, simultaneous O-glycosidation-esterification under Fischer conditions was achieved. The anomeric ratio of the products was studied based on the main experimental parameters and the activation mode (thermal or microwave). In the second step, aminolysis of the n-octyl ester was achieved with various functionalized primary amines under standard thermal or microwave activation. The physico-chemical properties of these new amphiphilic ligands were measured and these compounds were found to exhibit interesting surface properties. Complexing abilities of one uronamide ligand functionalized with a pyridine moiety toward Cu(II) ions was investigated in solution by EPR titrations. A solid compound was also synthesized and characterized, its relative structure was deduced from spectroscopic data.     

Amyloid fibrils as a nanoscaffold for enzyme immobilization

Amyloid fibrils are a misfolded state, formed by many proteins when subjected to denaturing conditions. Their constituent amino acids make them ideally suited as a readily functionalized nanoscaffold for enzyme immobilization and their strength, stability, and nanometer size are attractive features for exploitation in the creation of new bionanomaterials. We report successful functionalization of amyloid fibrils by conjugation to glucose oxidase (GOD) using glutaraldehyde. GOD retained activity upon attachment and successful cross‐linking was determined using electrophoresis, centrifugation, sucrose gradient centrifugation, and TEM. The resulting functionalized enzyme scaffold was then incorporated into a model poly(vinyl alcohol) (PVOH) film, to create a new bionanomaterial. The antibacterial effect of the functionalized film was then tested on E. coli, the growth of which was inhibited, demonstrating the incorporation of GOD antibacterial activity into the PVOH film. The incorporation of the GOD‐functionalized amyloid fibrils into PVOH provides an excellent ‘proof of concept’ model for the creation of a new bionanomaterial using a functionalized amyloid fibril scaffold. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

NO trapping in biological systems with a functionalized zeolite network.

Zeolite-Y powder has been functionalized with ferric iron-diethyldithiocarbamate complexes and applied to trap nitric oxide radicals in liquids and biological systems. The complexes have been assembled in situ in the pores of zeolite-Y and act as traps for nitric oxide radicals. The resulting mononitrosyl-iron complexes form a mixture of diamagnetic ferric and paramagnetic ferrous complexes. The yield of trapped NO may be determined ex situ using electron paramagnetic resonance. The material may be anchored on solid surfaces, mixed into a composite or compressed into small pellets. The material was used to detect endogenous NO in endothelial cell cultures and spinach leaves. The sensitivity of the functionalized zeolite is significantly better than that achieved in conventional trapping of NO with iron-diethyldithiocarbamate complexes.     

Acetylene functionalized BODIPY dyes and their application in the synthesis of activity based proteasome probes

The synthesis of three acetylene functionalized BODIPY dyes is described. These dyes are used to fluorescently modify an azido functionalized epoxomicin analogue employing the Huisgen 1,3-dipolar cycloaddition, resulting in a panel of fluorescent epoxomicin derived proteasome probes.