Synthesis, crystal structure and photoluminescent property of an iridium complex with coumarin derivative ligand

Novel iridium complex containing coumarin derivative as a cyclometalated ligand (L) and picolinate (pic) as the ancillary ligand, Ir(III)bis(3-(pyridin-2-yl)coumarinato N,C⁴)(picolinate) [Ir(L)₂(pic)], was synthesized and characterized. It was demonstrated that the iridium (III) ion in Ir(L)₂(pic) is hexacoordinated by two C atoms and two N atoms from 3-(pyridin-2-yl)coumarin ligands and one N atom and one O atom from picolinate ligand, displaying a distorted octahedral coordination geometry. The Ir(L)₂(pic) has very strong absorption and intensive emission at 532 nm. These results show the promising future of that Ir(L)₂(pic) in fabrication organic light-emitting diodes.     

A sensitive electrochemiluminescent sensor chip based on the ssDNA-Ru(II) complex and aptamer for the determination of thrombin

In this work, an electrochemiluminescence (ECL) sensor chip for sensitive detection of thrombin (TB) was prepared using a screen-printed electrode (SPE) as a working electrode and an aptamer as a specific recognition moiety. To produce an ECL sensor chip, a layer of pL-Cys was immobilized on the surface of the SPE using the cyclic voltammetry scanning method. A layer of gold nanoparticles (AuNPs) was assembled through an Au–S bond and hairpin DNA was further immobilized on the electrode surface. Ru(bpy)₂(mcpbpy)²⁺, as a luminescent reagent, was covalently bound to single-stranded DNA (ssDNA) to prepare a luminescence probe ssDNA-Ru. The probe was hybridized with TB aptamer to form a capture probe. In the presence of TB, the TB aptamer in the capture probe bound to TB, causing the release of ssDNA-Ru that could bind to hairpin DNA on the electrode surface. The Ru(II) complex as a luminescent reagent was assembled onto the electrode, and pL-Cys was used as a co-reactant to enhance the ECL efficiency. The ECL signal of the sensor chip generated based on the above principles had a linear relationship with log TB concentration at the range 10 fM to1 nM, and the detection limit was 0.2 fM. Finally, TB detection using this method was verified using real blood samples. This work provides a new method using an aptamer as a foundation and SPE as a material for the detection of biological substances.     

A single-use luciferase-based mercury biosensor using Escherichia coli HB101 immobilized in a latex copolymer film

A single-use Hg(II) patch biosensor has been developed consisting of 1.25-cm diameter patches of two acrylic vinyl acetate copolymer layers coated on polyester. The top layer copolymer was 47 μm thick whereas the bottom layer of copolymer plus E. coli cells was 30 μm thick. The immobilized E. coli HB101 cells harbored a mer-lux plasmid construct and produced a detectable light signal when exposed to Hg(II). The immobilized-cell Hg(II) biosensor had a sensitivity similar to that of suspended cells but a significantly larger detection range. The levels of mercury detected by the patches ranged from 0.1 nM to 10 000 nM HgCl₂ in pyruvate buffer, and luciferase induction as a function of Hg(II) concentration was sigmoidal. Luciferase activity was detected in immobilized cells for more than 78 h after exposure of the cells to HgCl₂. Addition of 1 mM D-cysteine to the pyruvate buffer increased luciferase induction more than 100-fold in the immobilized cell patches and 3.5-fold in a comparable suspension culture. The copolymer patches with immobilized cells were stable at −20°C for at least 3 months, and the Hg(II)-induced luciferase activity after storage was similar to that of samples assayed immediately after coating. Patches stored desiccated at room temperature for 2 weeks showed lower mercury-induced luciferase activity when compared to freshly prepared patches, but they still had a considerable detection range of 1 to 10 000 nM HgCl₂. Received 05 November 1998/ Accepted in revised form 08 April 1999     

Oligonucleotide probes applied for sensitive enzyme-amplified electrochemical assay of mercury(II) ions

We developed a novel electrochemical sensor for Hg(2+) detection using two mercury-specific oligonucleotide probes and streptavidin-horseradish peroxidase (HRP) enzymatic signal amplification. The two mercury-specific oligonucleotide probes comprised a thiolated capture probe and a biotinated signal probe. The thiolated capture probe was immobilized on a gold electrode. In the presence of Hg(2+), the thymine-Hg(2+)-thymine (T-Hg(2+)-T) interaction between the mismatched T-T base pairs directed the biotinated signal probe hybridizing to the capture probe and yielded a biotin-functioned electrode surface. HRP was then immobilized on the biotin-modified substrate via biotin-streptavidin interaction. The immobilized HRP catalyzed the oxidation of hydroquinone (H(2)Q) to benzoquinone (BQ) by hydrogen peroxide (H(2)O(2)) and the generated BQ was further electrochemically reduced at the modified gold electrode, producing a readout signal for quantitative detection of Hg(2+). The results showed that the enzyme-amplified electrochemical sensor system was highly sensitive to Hg(2+) in the concentration of 0.5 nM to 1 μM with a detection limit of 0.3 nM, and it also demonstrated excellent selectivity against other interferential metal ions.     

Synthesis, structures and properties of new cyclometalated iridium(III) complexes of 3-methoxy-6-methyl-2-(naphthalen-2-yl)pyridine

The reaction between 3-methoxy-6-methyl-2-(naphthalen-2-yl)pyridine 1 and IrCl₃ was performed in an attempt to synthesize a cyclometalated Ir(III) Cl-bridged dimer 2. An unexpected Ir(III) complex 3 was isolated, which was a five-coordinate bis-cyclometalated Ir(III) complex. The complexes 2 and 3 were converted to the same mononuclear complex 4 upon reacting with acetylacetonate (acac), respectively. All of the new compounds have been fully characterized by elemental analysis, IR, ¹H, ¹³C{¹H} NMR and ESI-MS. Additionally, the crystal structures and properties of these Ir(III) complexes are investigated. The most striking common features of the structures of 2 and 3 is intramolecular C-H···Cl hydrogen bonds. The complex 4 shows yellow phosphorescence with structureless emission peaks at about 556 nm.     

Detection of guanine-adenine mismatches by surface plasmon resonance sensor carrying naphthyridine-azaquinolone hybrid on the surface

We have discovered a new molecule naphthyridine–azaquinolone hybrid (Npt–Azq) that strongly stabilized the guanine-adenine (G-A) mismatch in duplex DNA. In the presence of Npt–Azq, the melting temperature (T_m) of 5′-d(CTA ACG GAA TG)-3′/3′-d(GAT TGA CTT AC)-5′ containing a single G-A mismatch increased by 15.4°C, whereas fully matched duplex increased its T_m only by 2.2°C. Npt–Azq was immobilized on the sensor surface for the surface plasmon resonance (SPR) assay to examine SPR detection of duplexes containing a G-A mismatch. Distinct SPR signals were observed when 27mer DNA containing a G-A mismatch was analyzed by the Npt–Azq immobilized sensor surfaces, whereas the signal of the fully matched duplex was ~6-fold weaker in intensity. The SPR signals for the G-A mismatch were proportional to the concentration of DNA in a range up to 1 µM, confirming that the SPR signal is in fact due to the binding of the G-A mismatch to Npt–Azq immobilized on the surface. Examination of all 16 G-A mismatches regarding the flanking sequence revealed that the sensor surface reported here is applicable to eight flanking sequences, covering 50% of all possible G-A mismatches.     

Aptamer biosensor for label-free square-wave voltammetry detection of angiogenin

Angiogenin (Ang), one of the most potent angiogenic factor, is related with the growth and metastasis of numerous tumors. This paper presents a very simple and label-free square-wave voltammetry (SWV) aptasensor to detect angiogenin, in which an anti-angiogenin-aptamer was used as a molecular recognition element, and the couple ferro/ferricyanide as a redox probe. At the bare gold electrode, the redox couple (K₄[Fe(CN)₆]/K₃[Fe(CN)₆]) can be very easily accessed to the electrode surface to give a very strong SWV signal. At the anti-angiogenin/Au electrode surface, when angiogenin was added to the electrochemical cell, the binding of the analyte results in less availability for a redox reaction, which led to smaller SWV current. To quantify the amount of angiogenin, current suppressions of SWV peak were monitored using the redox couple of an [Fe(CN)₆]^4−/3− probe. The plot of signal suppression against the logarithm of angiogenin concentration is linear with over the range from 0.01 nM to 30 nM with a detection limit of 1 pM. The aptasensor also showed very good selectivity for angiogenin without being affected by the presence of other proteins in serum. It is the first time to use a very simple method to detect the cancer marker. Such an aptasensor opens a rapid, selective and sensitive route for angiogenin detection and provides a promising strategy for other protein detections.     

An on-chip thin film photodetector for the quantification of DNA probes and targets in microarrays

A flat microdevice which incorporates a thin-film amorphous silicon (a-Si:H) photodetector with an upper layer of functionalized SiO₂ is used to quantify the density of both immobilized and hybridized DNA oligonucleotides labeled with a fluorophore. The device is based on the photoconductivity of hydrogenated amorphous silicon in a coplanar electrode configuration. Excitation, with near UV/blue light, of a single-stranded DNA molecule tagged with the fluorophore 1-(3-(succinimidyloxycarbonyl)benzyl)-4-(5-(4-methoxyphenyl)oxazol-2-yl) pyridinium bromide (PyMPO), results in the emission of visible light. The emitted light is then converted into an electrical signal in the photodetector, thus allowing the optoelectronic detection of the DNA molecules. The detection limit of the present device is of the order of 1 × 10¹² molecules/cm² and is limited by the efficiency of the filtering of the excitation light. A surface density of 33.5 ± 4.0 pmol/cm² was measured for DNA covalently immobilized to the functionalized SiO₂ thin film and a surface density of 3.7 ± 1.5 pmol/cm² was measured for the complementary DNA hybridized to the bound DNA. The detection concept explored can enable on-chip electronic data acquisition, improving both the speed and the reliability of DNA microarrays.     

Electrochemical nucleic acid hybridization biosensor based on poly(L-Aspartic acid)-modified electrode for the detection of short oligonucleotide sequences related to hepatitis C virus 1a

Abstract

This work describes, for the first time, the fabrication of poly(L-aspartic acid) (PAA) film modified pencil graphite electrode (PGE) for the detection of hepatitis C Virus 1a (HCV1a). The presence of PAA on the electrode surface can provide free carboxyl groups for covalent binding of biomolecules. The PGE surface was first coated with PAA via electropolymerization of the L-aspartic acid, and avidin was subsequently attached to the PAA modified electrode by covalent attachment. Biotinylated HCV1a probes were immobilized on avidin/PAA/PGE via avidin-biotin interaction. The morphology of PAA/PGE was examined using a scanning electron microscope. The hybridization events were monitored with square wave voltammetry using Meldola’s blue (MDB). Compared to non-complementary oligonucleotide sequences, when hybridization was carried out between the probe and its synthetic targets or the synthetic polymerase chain reaction analog of HCV1a, the highest MDB signal was observed. The linear range of the biosensor was 12.5 to 100?nM and limit of detection was calculated as 8.7?nM. The biosensor exhibited favorable stability over relatively long-term storage. All these results suggest that PAA-modified electrode can be used to nucleic acid biosensor application and electropolymerization of L-aspartic acid can be considered as a good candidate for the immobilization of biomolecules.     

Multimetallic compounds containing cyclometalated Ir(III) units: Synthesis, structure, electrochemistry and photophysical properties

The reaction of the cyclometalated Ir^III dimer [{(ppy)₂Ir}₂(μ-Cl)₂] (ppyH = 2-phenylpyridine) with silver triflate followed by a multidentate ligand [1,4-bis[3-(2-pyridyl)pyrazolylmethyl]benzene (bppb), 1,3,5-tri[3-(2-pyridyl)pyrazolylmethyl]-2,4,6-trimethylbenzene (tppb), 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz), 2-chloro-4,6-bis(dipyridin-2-ylamino)-1,3,5-triazine (cddt) or 2,4,6-tris(dipyridin-2-ylamino)-1,3,5-triazine (tdat)] afforded di- or trinuclear compounds: [{Ir(ppy)₂}₂(μ-bppb)](OTf)₂ (1), [{Ir(ppy)₂}₃(μ-tppb)](OTf)₃ (2), [{Ir(ppy)₂}₂(μ-tptz-OH)](OTf) (3), [{Ir(ppy)₂}₂(μ-cddt)](OTf)₂ (4) and [{Ir(ppy)₂}₂(μ-tdat)](OTf)₂ (5). All of these compounds contain cationic metal cores with corresponding triflate counter anions. The molecular structures of 1-4 reveal that the structural feature of the Ir(ppy)₂ center of the starting precursor is conserved in the products. Also, because of the nature of the ligands, there is virtually no electronic communication between the Ir^III centers except in 3 where a ring hydroxylation at the triazine carbon atom is effected upon metalation. Compounds 1-5 are robust in solution where they retain their structural integrity. The UV-Vis and emission spectra of 1-5 compounds are very similar to each other with the exception of 3 which seems to possess a different electronic structure. All the compounds are luminescent at room temperature. The emission bands indicate significant contribution from ³LC. Increase in the number of ‘Ir(ppy)₂’ units does not have any effect on emission color.     

Synthesis, crystallography and photoluminescence of a new pyrazolonato iridium complex

By using 1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone (pmip) as the ancillary ligand, the cyclometalated complex: bis-(2-phenylpyridine)-(pmip)-iridium [(ppy)₂Ir(pmip)] was synthesized. Its crystal structure, absorption and emission were compared with those of its analogue, the frequently used electrophosphorescent material (ppy)₂Ir(dbm) [bis-(2-phenylpyridine)-(dibenzoylmethane) iridium]. For (ppy)₂Ir(pmip) in dichloromethane, the emission is highly structured and the intensity is 5 times higher than that of (ppy)₂Ir(dbm). It is a result of the higher triplet energy level of pmip relative to that of dbm. In solid state, green emission of (ppy)₂Ir(pmip) peaked at 550 nm was observed with a quantum efficiency 0.31% in contrast to the emission at 626 nm with a quantum efficiency of 0.76% for (ppy)₂Ir(dbm). The bathochromical shift and higher efficiency in crystallized (ppy)₂Ir(dbm) was explained by the stronger π-π intermolecular interactions which is unique to in solid state (ppy)₂Ir(dbm) crystals.     

Design and characterization of electrochemical dopamine–aptamer as convenient and integrated sensing platform

Here, an ultrasensitive label-free electrochemical aptasensor was developed for dopamine (DA) detection. Construction of the aptasensor was carried out by electrodeposition of gold–platinum nanoparticles (Au–PtNPs) on glassy carbon (GC) electrode modified with acid-oxidized carbon nanotubes (CNTs–COOH). A designed complementary amine-capped capture probe (ssDNA1) was immobilized at the surface of PtNPs/CNTs–COOH/GC electrode through the covalent amide bonds formed by the carboxyl groups on the nanotubes and the amino groups on the oligonucleotides. DA-specific aptamer was attached onto the electrode surface through hybridization with the ssDNA1. Methylene blue (MB) was used as an electrochemical indicator that was intercalated into the aptamer through the specific interaction with its guanine bases. In the presence of DA, the interaction between aptamer and DA displaced the MB from the electrode surface, rendering a lowered electrochemical signal attributed to a decreased amount of adsorbed MB. This phenomenon can be applied for DA detection. The peak current of probe (MB) linearly decreased over a DA concentration range of 1–30 nM with a detection limit of 0.22 nM.     

A chronocoulometric aptasensor based on gold nanoparticles as a signal amplification strategy for detection of thrombin

A sensitive chronocoulometric aptasensor for the detection of thrombin has been developed based on gold nanoparticle amplification. The functional gold nanoparticles, loaded with link DNA (LDNA) and report DNA (RDNA), were immobilized on an electrode by thrombin aptamers performing as a recognition element and capture probe. LDNA was complementary to the thrombin aptamers and RDNA was noncomplementary, but could combine with [Ru(NH₃)₆]³⁺ (RuHex) cations. Electrochemical signals obtained by RuHex that bound quantitatively to the negatively charged phosphate backbone of DNA via electrostatic interactions were measured by chronocoulometry. In the presence of thrombin, the combination of thrombin and thrombin aptamers and the release of the functional gold nanoparticles could induce a significant decrease in chronocoulometric signal. The incorporation of gold nanoparticles in the chronocoulometric aptasensor significantly enhanced the sensitivity. The performance of the aptasensor was further increased by the optimization of the surface density of aptamers. Under optimum conditions, the chronocoulometric aptasensor exhibited a wide linear response range of 0.1–18.5 nM with a detection limit of 30 pM. The results demonstrated that this nanoparticle-based amplification strategy offers a simple and effective approach to detect thrombin.     

Rapid development of new protein biosensors utilizing peptides obtained via phage display

There is a consistent demand for new biosensors for the detection of protein targets, and a systematic method for the rapid development of new sensors is needed. Here we present a platform where short unstructured peptides that bind to a desired target are selected using M13 phage display. The selected peptides are then chemically synthesized and immobilized on gold, allowing for detection of the target using electrochemical techniques such as electrochemical impedance spectroscopy (EIS). A quartz crystal microbalance (QCM) is also used as a diagnostic tool during biosensor development. We demonstrate the utility of this approach by creating a novel peptide-based electrochemical biosensor for the enzyme alanine aminotransferase (ALT), a well-known biomarker of hepatotoxicity. Biopanning of the M13 phage display library over immobilized ALT, led to the rapid identification of a new peptide (ALT5-8) with an amino acid sequence of WHWRNPDFWYLK. Phage particles expressing this peptide exhibited nanomolar affinity for immobilized ALT (K_d,app = 85±20 nM). The newly identified ALT5-8 peptide was then chemically synthesized with a C-terminal cysteine for gold immobilization. The performance of the gold-immobilized peptides was studied with cyclic voltammetry (CV), QCM, and EIS. Using QCM, the sensitivity for ALT detection was 8.9±0.9 Hz/(µg/mL) and the limit of detection (LOD) was 60 ng/mL. Using EIS measurements, the sensitivity was 142±12 impedance percentage change %/(µg/mL) and the LOD was 92 ng/mL. In both cases, the LOD was below the typical concentration of ALT in human blood. Although both QCM and EIS produced similar LODs, EIS is preferable due to a larger linear dynamic range. Using QCM, the immobilized peptide exhibited a nanomolar dissociation constant for ALT (K_d = 20.1±0.6 nM). These results demonstrate a simple and rapid platform for developing and assessing the performance of sensitive, peptide-based biosensors for new protein targets.     

Investigations of anticholinestrase and antioxidant potentials of methanolic extract,subsequent fractions,crude saponins and flavonoids isolated from Isodon rugosus

Background

Based on the ethnomedicinal uses and the effective outcomes of natural products in various diseases, this study was designed to evaluate Isodon rugosus as possible remedy in oxidative stress, alzheimer’s and other neurodegenerative diseases. Acetylecholinestrase (AChE) and butyrylcholinesterase (BChE) inhibitory activities of crude methanolic extract (Ir.Cr), resultant fractions (n-hexane (Ir.Hex), chloroform (Ir.Cf), ethyl acetate (Ir.EtAc), aqueous (Ir.Aq)), flavonoids (Ir.Flv) and crude saponins (Ir.Sp) of I. rugosus were investigated using Ellman’s spectrophotometric method. Antioxidant potential of I. rugosus was determined using DPPH, H₂O₂ and ABTS free radicals scavenging assays. Total phenolic and flavonoids contents of plant extracts were determined and expressed in mg GAE/g dry weight and mg RTE/g of dry sample respectively.

Results

Among different fractions Ir.Flv and Ir.Cf exhibited highest inhibitory activity against AChE (87.44 ± 0.51, 83.73 ± 0.64%) and BChE (82.53 ± 0.71, 88.55 ± 0.77%) enzymes at 1 mg/ml with IC₅₀ values of 45, 50 for AChE and 40, 70 μg/ml for BChE respectively. Activity of these fractions were comparable to galanthamine causing 96.00 ± 0.30 and 88.61 ± 0.43% inhibition of AChE and BChE at 1 mg/ml concentration with IC₅₀ values of 20 and 47 μg/ml respectively. In antioxidant assays, Ir.Flv, Ir.Cf, and Ir.EtAc demonstrated highest radicals scavenging activities in DPPH and H₂O₂ assays which were comparable to ascorbic acid. Ir.Flv was found most potent with IC₅₀ of 19 and 24 μg/ml against DPPH and H₂O₂ radicals respectively. Whereas antioxidant activates of plant samples against ABTS free radicals was moderate. Ir.Cf, Ir.EtAc and Ir.Cr showed high phenolic and flavonoid contents and concentrations of these compounds in different fractions correlated well to their antioxidant and anticholinestrase activities.

Conclusion

It may be inferred from the current investigations that the Ir.Sp, Ir.Flv and various fractions of I. rugosus are good sources of anticholinesterase and antioxidant compounds. Different fractions can be subjected to activity guided isolation of bioactive compounds effective in neurological disorders.     

Evaluation of osmium(II)-nitrosyl complexes as a method to increase the yield of the 191Os-191mIr generator

The nitrosyl complexes pentachloronitrosylosmate(II), [OsCl₅(NO)]²⁻, and hydroxytetranitronitrosylosmate(II), [Os(OH)(NO₂)₄(NO)]²⁻, were evaluated as parent species for use on the ¹⁹¹Os-^191mIr generator in an attempt to increase the ^191mIr yield of the generator by providing a direct route to a chemically stable ^191mIr daughter. The uptake of the ¹⁹¹Os-labeled complexes by the inorganic ion-exchangers ZrO₂, SnO₂, PbS, MnO₂ and Al₂O₃ and the organic resin AG MP-1 was measured and prototype generators were prepared using those exchangers that demonstrated greater than 90% uptake of the ¹⁹¹Os-labeled complexes. The ^191mIr(III)-nitrosyl complexes produced subsequent to β⁻ decay of the ¹⁹¹Os-nitrosyl parent complexes were found to undergo secondary chemical reactions to form nitro (NO⁻₂) complexes that were tightly retained on the ion exchanger limiting ^191mIr yield to less than 5%.     

Ionic luminescent cyclometalated Ir(III) complexes with polypyridine co-ligands

Two novel ligands containing a functionalized N ∧ N chelating moiety (pbpy-OBut and tpy-COOH, respectively) were treated with [Ir(ppy)₂(μ-Cl)]₂ (ppy = 2-(2-pyridyl)phenyl), leading to the cationic cyclometalated complexes [Ir(ppy)₂(pbpy-OBut)]⁺ (2) (pbpy-OBut = 4-{4′-(4-phenyloxy)-6′-phenyl-2,2′-bipyridyl}butene) and [Ir(ppy)₂(tpy-COOH)]⁺ (3) (tpy-COOH = 4′-(4-carboxyphenyl)-2,2′:6′,2″-terpyridine). Complexes 2 and 3 exhibit intense room temperature luminescence both in solution and as solid films. Assignment of the emissive behavior to a ³LLCT (ppy-to-N ∧ N) excited state is proposed.     

An ultrasensitive supersandwich electrochemical DNA biosensor based on gold nanoparticles decorated reduced graphene oxide

In this article, a supersandwich-type electrochemical biosensor for sequence-specific DNA detection is described. In design, single-strand DNA labeled with methylene blue (MB) was used as signal probe, and auxiliary probe was designed to hybridize with two different regions of signal probe. The biosensor construction contained three steps: (i) capture DNA labeled with thiol was immobilized on the surface of gold nanoparticles decorated reduced graphene oxide (Au NPs/rGO); (ii) the sandwich structure formation contained “capture–target–signal probe”; and (iii) auxiliary probe was introduced to produce long concatamers containing signal molecule MB. Differential pulse voltammetry (DPV) was used to monitor the DNA hybridization event using peak current changes of MB in phosphate-buffered saline (PBS) containing 1.0 M NaClO₄. Under optimal conditions, the peak currents of MB were linear with the logarithm of the concentration of target DNA in the range of 0.1 μM to 0.1 fM with a detection limit of 35 aM (signal/noise = 3). In addition, this biosensor exhibited good selectivity even for single-base mismatched target DNA detection.