Immobilized lipase on porous silica particles: Preparation and application for biodegradable polymer syntheses in ionic liquid at higher temperature

Porous silica particles (PSP) modified with different surface active groups were prepared for covalent immobilization of porcine pancreas lipase (PPL). Organosilanes combined with reactive end amino-group or epoxy-group were employed for the modification through silanization process. Polyethylenimine and long chain alkyl silane coupling agent were also used in the modification process. Several modification-immobilization strategies were performed, while good coupling yield could be achieved within the range of 86.2–158.2 mg of native PPL per gram of the carrier. Furthermore, at higher temperature, the resulting immobilized PPL (IPPL) could successfully perform the syntheses of polycaprolactone (PCL) and poly(5,5-dimethyl-1,3-dioxan-2-one) (PDTC) in ionic liquid medium. No polymers could be obtained catalyzed by native PPL, suggesting that IPPL showed much higher catalytic activity than native PPL. Effect of different treatments on the activity of IPPL also showed the long time high temperature stability in ionic liquid medium, contributing to a good combination of immobilization and ionic liquids effect. The catalytic activity of IPPL for polymerization was closely related to both the properties of immobilized enzyme and cyclic monomer. This work would be expected to highlight further careful design of immobilized enzyme for a wide range of application, especially in biodegradable polymers syntheses.     

Enantioselective enzymatic hydrolysis of racemic glycidyl esters by using immobilized porcine pancreas lipase with improved catalytic properties

The crude porcine pancreas lipase (PPL) extract is a mixture of several proteins (mainly lipases and esterases). In order to develop enzymatic catalysts with good catalytic properties for hydrolytic enantioselective reactions in aqueous homogeneous medium, we studied the immobilization of the different enzymes contained in the crude PPL extracts by selective sequential adsorption on hydrophobic supports bearing octyl, octadecyl and phenyl groups. Some minor proteins were selectively adsorbed on octyl and octadecyl supports while the most abundant lipase was adsorbed on the support bearing phenyl groups. The enantioselectivity of the different lipase derivatives were tested considering the hydrolysis of esters of 1,2-epoxi-1-propanol (glycidol). The most abundant lipase contained in the commercial crude PPL extract resulted almost inactive while some lipases contained in low concentrations displayed high activities and enantioselectivities. The most interesting results were obtained with a 28-kDa protein selectively adsorbed on octyl-agarose. With this enzyme derivative, the residual butyric ester of glycidol was recovered with 96% enantiomeric excess at 55% conversion.     

Blueprint for a lipase support: Use of hydrophobic controlled-pore glasses as model systems

For the commercial exploitation of lipase biocatalysis to be successful, it is essential that effective supports are selected for lipase immobilization. In this study hydrophobic controlled-pore glasses have been used as model systems for the immobilization of Rhizomucor miehei lipase. The effect of pore diameter and surface chemistry on enzyme efficiency in a typical esterification reaction under essentially nonaqueous conditions has been examined. It has been found that pore diameters of at least 35 nm are needed for the lipase to be able to utilize the internal volume of the support particles in the immobilization process. Despite the small size of the substrates in the esterification reaction, even larger pores (>100 nm) are required for the lipase efficiency to become independent of pore diameter; below 100 nm lipase activity and efficiency are markedly reduced. It has also been shown that the chemical nature of the hydrophobic surface plays an important part in catalyst design. Although lipase will adsorb readily to a wide range of hydrophobic groups, the highest catalyst activities are obtained when the glass surface is derivatized to give long alkyl chains; the presence of unsaturated derivatives gonerally leads to a reduction in activity. (c) 1994 John Wiley & Sons, Inc.     

Immobilized lipase on macroporous polystyrene modified by PAMAM-dendrimer and their enzymatic hydrolysis

The novel enzyme carrier, polyamidoamine (PAMAM) dendrimers modified macroporous polystyrene, has been synthesized by Michael addition and firstly used in the immobilization of porcine pancreas lipase (PPL) effectively by covalent attachment. The resulting carrier was characterized with the Fourier transform infrared spectra (FT-IR), scanning electron microscopy (SEM), elemental analysis and thermogravimetric (TG) analysis. Meanwhile, the amount of immobilized lipase was up to 100 mg g⁻¹ support and the factors related with the enzyme activity were investigated. The immobilization of the PPL improved their performance in wider ranges of pH and temperature. Thermal stability of the immobilized lipase also increased dramatically in comparison with the free ones and the immobilized lipase exhibited a favorable denaturant tolerance. As a biocatalyst, the immobilized lipase for batch hydrolysis of olive oil emulsion retained 85% activity after 10 times of recycling. This well-reusability of immobilized lipase was very valuable and meaningful in enzyme technology.     

海泡石吸附固定化猪胰脂肪酶

以海泡石作为猪胰脂肪酶(PPL)的固定化载体,考察采用物理吸附的方法制备固定化脂肪酶的条件。结果表明:在固载时间4 h、反应磷酸盐(PBS)溶液pH 6.0、反应温度25℃时,可达最大比酶活309 U/g,固定化酶的化学稳定性和热稳定性均较高。同时利用红外谱仪(FT-IR)和扫描电子显微镜(SEM)的分析手段对固定化猪胰脂肪酶试样进行分析,进一步确定了海泡石材料在固定化酶中的作用。     

Purification and initial characterization of lipase from the scutella of corn seedlings

The lipase from the scutella of corn (Zea mays) MO-17 seedlings was purified 272-fold to apparent homogeneity as evidenced by sodium dodecyl sulfate polyacrylamide gel electrophoresis and double immunodiffusion. The procedure involved isolation of the lipid bodies, extraction with diethyl ether, DE-52 ion exchange chromatography, and sucrose density gradient centrifugation. The enzyme had an approximate molecular weight of 270,000 daltons after sucrose density gradient centrifugation, and 65,000 daltons after sodium dodecyl sulfate polyacrylamide gel electrophoresis. The lipase contained no cysteine and its molecular weight in sodium dodecyl sulfate was not reduced by β-mercaptoethanol. The amino acid composition as well as a biphasic partition using Triton X-114 revealed the enzyme to be a hydrophobic protein. Rabbit γ-globulin containing antibodies raised against the purified lipase formed one precipitin line with the lipase in a double diffusion test, and precipitated all the lipase activity from a solution.     

An efficient resolution of racemic secondary alcohols on magnetically separable biocatalyst

The combination of magnetic nanoparticles and mesoporous silica can present a strategy for enzyme immobilization. In this work, magnetic siliceous mesocellular foam functionalized with octyl groups was prepared and used as support for lipase adsorption. Almost all the active lipases in crude enzyme solution were adsorbed by this magnetically separable, hydrophobic siliceous mesocellular foam. The resolution of 1-phenylethanol acylated with vinyl acetate can be achieved in 1.5 h using the resultant magnetic biocatalyst, whereas only 30% conversion was obtained by using the free lipase under the identical reaction conditions. These results are probably due to the “interfacial adsorption” and “hyper-activation” of lipase on the hydrophobic surface of the magnetic siliceous mesocellular foam. Moreover, the biocatalyst entrapped in the nanopores of this foam can be recycled magnetically for at least seven times without significant loss of its activity and enantioselectivity.     

Influence of coprecipitation and interactions with anionic surfactants on the activity of plant phospholipase D.

The effects of two surfactants (sodium dodecyl sulfate and sodium dodecyl dioxyethylene sulfate) of similar structure but differing water solubility (of their calcium salts) on the enzymatic activity of cabbage phospholipase D have been studied. The solubility difference is insignificant because the two surfactants activate phospholipase D similarly. To elucidate the mechanism of their influence on the enzyme, the phase behavior in the reaction media and the interactions of the surfactants with the enzyme were investigated by potentiometry and by light scattering and UV spectroscopy. Calcium dodecyl dioxyethylene sulfate (which is more soluble in water than calcium dodecyl sulfate) precipitates in the presence of phosphatidylcholine, the substrate of the enzymatic reaction. In the reaction media phospholipase D was involved into a precipitate consisting of calcium salts of the surfactants and phosphatidylcholine that might be interpreted as its immobilization. In addition, the surfactants were adsorbed on the enzyme, unfolding the globular enzyme molecule due to electrostatic repulsion between adsorbed surfactant anions. The observed increase in the functional activity of phospholipase D is accounted for by transfer to an optimal tertiary structure for the enzyme molecule in the course of consecutive conformational transitions induced by the surfactants.     

Improvement of the functional properties of a thermostable lipase from alcaligenes sp. via strong adsorption on hydrophobic supports

Lipase QL from Alcaligenes sp. is a quite thermostable enzyme. For example, it retains 75% of catalytic activity after incubation for 100 h at 55 °C and pH 7.0. Nevertheless, an improvement of the enzyme properties was intended via immobilization by covalent attachment to different activated supports and by adsorption on hydrophobic supports (octadecyl-sepabeads). This latter immobilization technique promotes the most interesting improvement of enzyme properties: (a) the enzyme is hyperactivated after immobilization: the immobilized preparation exhibits a 135% of catalytic activity for the hydrolysis of p-nitrophenyl propionate as compared to the soluble enzyme; (b) the thermal stability of the immobilized enzyme is highly improved: the immobilized preparation exhibits a half-life time of 12 h when incubated at 80 °C, pH 8.5 (a 25-fold stabilizing factor regarding to the soluble enzyme); (c) the optimal temperature was increased from 50 °C (soluble enzyme) up to 70 °C (hydrophobic support enzyme immobilized preparations); (d) the enantioselectivity of the enzyme for the hydrolysis of glycidyl butyrate and its dependence on the experimental conditions was significantly altered. Moreover, because the enzyme becomes reversibly but very strongly adsorbed on these highly hydrophobic supports, the lipase may be desorbed after its inactivation and the support may be reused. Very likely, adsorption occurs via interfacial activation of the lipase on the hydrophobic supports at very low ionic strength. On the other hand, all the covalent immobilization protocols used to immobilize the enzyme hardly improved the properties of the lipase.     

Immobilization of lipases for non-aqueous synthesis

Immobilization of lipases involves many levels of complications relating to the structure of the active site and its interactions with the immobilization support. Interaction of the so called hydrophobic ‘lid’ with the support has been reported to affect synthetic activity of an immobilized lipase. In this work we evaluate and compare the synthetic activity of lipases from different sources immobilized on different kinds of supports with varying hydrophobicity. Humicola lanuginosa lipase, Candida antarctica lipase B and Rhizomucor miehei lipase were physically adsorbed onto two types of hydrophobic carriers, namely hydrophilic carriers with conjugated hydrophobic ligands, and supports with base matrix hydrophobicity. The prepared immobilized enzymes were used for acylation of n-butanol with oleic acid as acyl donor in iso-octane with variable water content (0–2.8%, v/v) as reaction medium. Enzyme activity and effect of water on the activity of the immobilized derivatives were compared with those of respective soluble lipases and a commercial immobilized lipase Novozyme 435. Both R. miehei and H. lanuginosa immobilized lipases showed maximum activity at 1.39% (v/v) added water concentration. Sepabeads, a methacrylate based hydrophilic support with conjugated octadecyl chain showed highest immobilized esterification (synthetic) activity for all three enzymes, and of the three R. miehei lipase displayed maximum esterification activity comparable to the commercial enzyme.     

Utilization of powdered pig bone as a support for immobilization of lipase

Pig bone was examined for its suitability as a support material for lipase immobilization. It was observed that pig bone (PB) particles dispersed readily in both polar and nonpolar solvents, and lipase was easily adsorbed. In particular lipase adsorbed on olive oil-soaked pig bone (OPB) particles exhibited a higher hydrolytic activity than that in lipase adsorbed on a selection of other representative supports, regardless of removing the presoaked olive oil from the particles after immobilization of lipase. The optimum pH and temperature for hydrolytic activity of OPB-adsorbed lipase were the same as those for free lipase, although thermal resistance was increased by immobilization. When OPB-adsorbed lipase was used for repeated batch reactions of olive oil hydrolysis, an activity of more than 80% of the initial activity of each run could he retained after 46 h reaction. The results suggest that PB is an excellent support material.     

γ-Fe_2O_3-凹土超顺磁性纳米复合材料固载猪胰脂肪酶

以凹凸棒石黏土为原料,制备γ-Fe2O3-凹土超顺磁性纳米复合材料(γ-Fe2O3-ATP)作为猪胰脂肪酶(PPL)固定化的载体,利用透射电子显微镜(TEM)、N2吸附脱附等温图(BET)、振动试样磁强计(VSM)等对材料进行表征,同时对固定化条件和固定化酶的相关性质进行了研究。结果表明:制备的γ-Fe2O3-ATP是介孔材料,比表面积为102.63 m2/g,平均孔径为10.862 nm,饱和磁化强度为8.915 emu/g,其作为载体能实现固定化酶与反应介质简单、快速分离回收和重复利用。在固定化时间为4 h及pH 6.0时制备的固定化酶效果最佳;经过6 h高温保存后固定化酶可保留初始酶活的52%,而游离酶仅保留初始酶活的19%,同时固定化酶在重复使用5次后酶活仍保留初始酶活的60%。     

Immobilization of lipase in organic solvent in the presence of fatty acid additives

In this study porcine pancreatic lipase (PPL) was covalently immobilized on cross-linked polyvinyl alcohol (PVA) in organic media in the presence of fatty acid additives in order to improve its immobilized activity. The effects of fatty acid additions to the immobilization media were investigated choosing tributyrin hydrolysis in water and ester synthesis by immobilized PPL in n-hexane. Various fatty acids which are also the substrates of lipases in esterification reactions were used as active site protecting agents during the immobilization process in an organic solvent. The obtained results showed that covalent immobilization carried out in the presence of fatty acids as protective ligands improved the hydrolytic and esterification activity of immobilized enzyme. A remarkable increase in activity of the immobilized PPL was obtained when octanoic acid was used as an additive and the hydrolytic activity was increased from 5.2 to 19.2 μmol min⁻¹ mg⁻¹ as compared to the non-additive immobilization method. With the increase of hydrolytic activity of immobilized lipase in the presence of octanoic acid, in an analogous manner, the rate of esterification for the synthesis of butyl octanoate was also increased from 7.3 to 26.3 μmol min⁻¹ g⁻¹ immobilized protein using controlled thermodynamic water activities with saturated salt solutions. In addition, the immobilized PPL activity was maintained at levels representing 63% of its original activity value after 5 repeated uses. The proposed method could be adopted for a wide variety of other enzymes which have highly soluble substrates in organic solvent such as other lipases and esterases.     

纳米银复合介孔碳材料制备固定化猪胰脂肪酶

以稻壳为原料制备介孔碳材料,对其表面进行纳米银修饰后作为猪胰脂肪酶(PPL)的固定化载体.初步研究并优化该载体固定猪胰脂肪酶的条件.结果表明:在AgNO3浓度为0.01 mol/L、固载时间6h、反应磷酸盐溶液pH为6.0、反应温度25℃时,可达最大酶活,酶活提高3.2倍.同时利用红外图谱(FT-IR)、N2等温吸附-脱附曲线(BET)和扫描电子显微镜(SEM)的分析手段对固定化猪胰脂肪酶试样进行分析,进一步确定了纳米银复合介孔性碳材料在固定化酶实验中的作用.     

Enhancement of the activity and enantioselectivity of lipase in organic systems by immobilization onto low-cost support

Lipase from Arthrobacter sp. was immobilized onto low-cost diatomite materials using different protocols for the resolution of 4-hydroxy-3-methyl-2-(2-propenyl)-2-cyclopenten-1-one (HMPC) by asymmetric acylation. The support surface was grafted various functional groups including methacryloxypropyl, vinyl, octyl, dodecyl and γ-(aminopropyl)-glutaraldehyde. These modifications resulted in various mechanisms during the immobilization and thus introduced different characteristics to the prepared lipases. The interfacially adsorbed lipase onto dodecyl-modified support exhibited both higher activity and stability among these immobilized preparations. The modified enzyme-aggregate coating method was performed based on interfacial adsorption in our work, and the characteristics of this immobilized lipase were investigated and compared with those by cross-linking and interfacial adsorption methods. It was shown that the enzyme-aggregate coated lipase yielded the highest activity with a recovered activity of 8.5-fold of the free enzyme, and the highest operational stability with 85% of initial activity remained after 10 recycles. Excellent enantioselectivity (E ≥ 400, with e.e. = 99% of S-HMPC) was obtained for most lipase preparations in our paper (E = 85 for the free enzyme).     

Fabrication of an organic–inorganic nanocomposite carrier for enzyme immobilization based on metal–organic coordination

An organic–inorganic nanocomposite which combined mesoporous silica SBA-15 and chitosan using a carboxyl functionalized ionic liquid as the bridging agent (SBA@CS) was successfully fabricated, and was used to immobilize porcine pancreas lipase (PPL) by physical adsorption, cross-linking and metal–organic coordination, respectively. The as-prepared carriers were characterized by scanning electron microscopy, Fourier transform infrared and energy-dispersive X-ray spectroscopy. Compared with immobilization onto the pure mesoporous silicon material SBA-15, all the batches of PPL immobilized onto organic–inorganic nanocomposites showed higher activity, improved stability and reusability as well as better resistance to pH and temperature changes. Among the immobilized PPLs, immobilization based on Co²⁺ coordination (SBA@CS-Co-PPL) produced the best enzymatic properties. The maximum immobilization efficiency and specific activity of 79.6% and 1975.8 U g⁻¹ were obtained with SBA@CS-Co, separately. More importantly, the activity of immobilized enzyme can still maintain 84.0% after 10 times of reuse. These results demonstrated that thus prepared organic–inorganic nanocomposite could be an ideal carrier for enzyme immobilization by metal–organic coordination.     

Interface-mediated inactivation of pancreatic lipase by a water-reactive compound: 2-sulfobenzoic cyclic anhydride

2-Sulfobenzoic cyclic anhydride (SBA) rapidly and selectively inactivates porcine pancreatic lipase (PPL) only when added during the hydrolysis of an emulsified ester such as tributyrin or dodecyl acetate. The present data suggest that the inactivation of PPL occurs preferentially at the oil/water interface and not in the aqueous phase, since colipase and bile salt were found to adversely affect the inhibition process. Moreover, it is shown that at a molar ratio of SBA to pure PPL of 1, 40% of the lipase activity was already irreversibly lost. Complete inactivation was observed at SBA to pure PPL molar ratios of 120. A 60% inactivation occurred when 0.5 mol of 3H-labeled SBA was attached per mole of PPL. The SBA-inactivated PPL competes for binding to the dodecyl acetate/water interface as efficiently as the native enzyme. Larger SBA concentrations are required when crude lipase preparations are used as well as with pure PPL in the presence of bile salts and colipase. Lipases were found to have variable sensitivities to SBA inactivation, depending on their origin. In the presence of bile salts and tributyrin at pH 6.0, human gastric lipase activity was not affected by the presence of a 10(6) molar excess of SBA.     

Lipase immobilized on hydrophobic porous polymer supports prepared by concentrated emulsion polymerization and their activity in the hydrolysis of triacylglycerides

Microporous polymer supports for the immobilization of lipase have been prepared by the polymerization of a concentrated emulsion precursor. The concentrated emulsion consists of a mixture of styrene and divinyl-benzene containing a suitable surfactant and an initiator as the continuous phase and water as the dispersed phase. The volume fraction of the latter phase was greater than 0.74, which is the volume fraction of the dispersed phase for the most compact arrangement of spheres of equal radius. The lipase from Candida rugosa has been immobilized on the internal surface of the hydrophobic microporous poly(styrene-divinyl benzene) supports and used as biocatalysts for the hydrolysis of triacylglycerides. The effects of the amount of surfactant, of the molar ratio of divinylbenzene/styrene in the continuous phase, and of the aquaphilicity of the supports on the adsorption, activity, and stability of the immobilized lipase have been investigated. The microporous poly(styrene-divinylbenzene) adsorbents constitute excellent supports for lipase because both the amount adsorbed is large and the rate of enzymatic reaction per molecule of lipase is higher for the immobilized enzyme than for the free one. (c) 1993 John Wiley & Sons, Inc.     

Immobilization of Candida rugosa lipase on poly(allyl glycidyl ether-co-ethylene glycol dimethacrylate) macroporous polymer particles

Macroporous polymer particles containing surface epoxy groups were synthesized for immobilization of Candida rugosa lipase (CRL). The effect of incorporation of two different sets of monomers [allyl glycidyl ether (AGE) and glycidyl methacrylate (GMA)] and the effect of crosslinking density on immobilization of lipase were studied. AGE-co-EGDM polymers gave higher binding and expression of lipase than GMA-co-EGDM polymers. Optimization of immobilization parameters was done with respect to immobilization time and enzyme loading. Amongst AGE-co-EGDM polymer series, AGE-150 polymer found to give maximum lipase activity yield and therefore evaluated for temperature, pH and storage stability. Under optimum conditions, AGE-150 polymer gave 78.40% of activity yield. Immobilized lipase on AGE-150 showed a broader pH, higher temperature and excellent storage stability.     

Comparison of physical and covalent immobilization of lipase from Candida antarctica on polyamine microspheres of alkylamine matrix

Abstract

Polyamine microspheres (PA-M) prepared using polyethyleneimine as matrix were used for the immobilization of Candida antarctica lipase. The isoelectric point of PA-M is 10.6, and the hydrophobicity of PA-M was indicated using naphthalene. Optimization of conditions showed that the maximal loading of lipase on PA-M reached 230.2 mg g^{? 1} at pH 9.0 and 35°C. An increased buffer concentration had no effect on the activity of lipase but decreased the amount of lipase adsorbed. Simulation with Langmuir and Freundlich isotherms demonstrated that the adsorption of lipase on PA-M was thermodynamically favorable. Covalent crosslinking of the lipase adsorbed extended the pH range and increased the optimal temperature of the lipase activity. The physically adsorbed lipase (P-lipase) and the covalently immobilized derivative (C-lipase) retained more than 75% and 85% of their initial activity, respectively, after 10 cycles of usage. The half-lives of P-lipase and C-lipase at 50°C were 15.70 and 27.67 times higher than that of the free enzyme, respectively. Compared to P-lipase, covalent immobilization obviously reduced the catalytic efficiency and activation energy of the enzyme.