Overproduction of Wild-Type and Bioengineered Derivatives of the Lantibiotic Lacticin 3147

Lacticin 3147 is a broad-spectrum two-peptide lantibiotic whose genetic determinants are located on two divergent operons on the lactococcal plasmid pMRC01. Here we introduce each of 14 subclones, containing different combinations of lacticin 3147 genes, into MG1363 (pMRC01) and determine that a number of them can facilitate overproduction of the lantibiotic. Based on these studies it is apparent that while the provision of additional copies of genes encoding the biosynthetic/production machinery and the regulator LtnR is a requirement for high-level overproduction, the presence of additional copies of the structural genes (i.e., ltnA1A2) is not.     

Variable bacteriocin production in the commercial starter Lactococcus lactis DPC4275 is linked to the formation of the cointegrate plasmid pMRC02

Lactococcus lactis DPC4275 is a bacteriocin-producing transconjugant of the industrial starter strain DPC4268. Strain DPC4275 was generated through conjugal transfer by mating DPC4268 with L. lactis MG1363 containing the 60-kb plasmid pMRC01, which encodes the genetic determinants for the lantibiotic lacticin 3147 and for a phage resistance mechanism of the abortive infection type. The many significant applications of this strain prompted a genetic analysis of its apparently unstable bacteriocin-producing phenotype. Increased levels of lacticin 3147 produced by DPC4275 were associated with the appearance of an 80-kb plasmid, designated pMRC02, which was derived from DNA originating from pMRC01 (60 kb) and a resident DPC4268 proteinase plasmid, pMT60 (60 kb). Indeed, pMRC02 was shown to be derived from the insertion of a 17-kb fragment of pMRC01, encompassing the lacticin 3147 operon, into pMT60. The presence of pMRC02 at a high copy number was found to correlate with increased levels of lacticin 3147 in DPC4275 compared to the wild-type containing pMRC01. Subsequent transfer of pMRC02 into the plasmid-free strain MG1363 by electroporation allowed a direct phenotypic comparison with pMRC01, also studied in the MG1363 background. Plasmid pMRC02 displayed phage resistance similar to that by pMRC01, although it was less potent, as demonstrated by a larger plaque size for phage c2 infection of MG1363(pMRC02). While this locus is flanked by IS946 elements, the sequencing of pMT60-pMRC01 junction sites established that this event was unlikely to be insertion sequence mediated and most probably occurred by homologous recombination followed by deletion of most of pMRC01. This was not a random occurrence, as nine other transconjugants investigated were found to have the same junction sites. Such derivatives of commercial strains producing increased levels of bacteriocin could be exploited as protection cultures for food applications.     

Variable Bacteriocin Production in the Commercial Starter Lactococcus lactis DPC4275 Is Linked to the Formation of the Cointegrate Plasmid pMRC02

Lactococcus lactis DPC4275 is a bacteriocin-producing transconjugant of the industrial starter strain DPC4268. Strain DPC4275 was generated through conjugal transfer by mating DPC4268 with L. lactis MG1363 containing the 60-kb plasmid pMRC01, which encodes the genetic determinants for the lantibiotic lacticin 3147 and for a phage resistance mechanism of the abortive infection type. The many significant applications of this strain prompted a genetic analysis of its apparently unstable bacteriocin-producing phenotype. Increased levels of lacticin 3147 produced by DPC4275 were associated with the appearance of an 80-kb plasmid, designated pMRC02, which was derived from DNA originating from pMRC01 (60 kb) and a resident DPC4268 proteinase plasmid, pMT60 (60 kb). Indeed, pMRC02 was shown to be derived from the insertion of a 17-kb fragment of pMRC01, encompassing the lacticin 3147 operon, into pMT60. The presence of pMRC02 at a high copy number was found to correlate with increased levels of lacticin 3147 in DPC4275 compared to the wild-type containing pMRC01. Subsequent transfer of pMRC02 into the plasmid-free strain MG1363 by electroporation allowed a direct phenotypic comparison with pMRC01, also studied in the MG1363 background. Plasmid pMRC02 displayed phage resistance similar to that by pMRC01, although it was less potent, as demonstrated by a larger plaque size for phage c2 infection of MG1363(pMRC02). While this locus is flanked by IS946 elements, the sequencing of pMT60-pMRC01 junction sites established that this event was unlikely to be insertion sequence mediated and most probably occurred by homologous recombination followed by deletion of most of pMRC01. This was not a random occurrence, as nine other transconjugants investigated were found to have the same junction sites. Such derivatives of commercial strains producing increased levels of bacteriocin could be exploited as protection cultures for food applications.     

A food-grade approach for functional analysis and modification of native plasmids in Lactococcus lactis

While plasmids from lactic acid bacteria possess many traits that are of industrial value, their exploitation is often frustrated by an inability to conduct food-grade engineering of native plasmids or to readily screen for their transfer. Here we describe a system that uses a RepA(+) temperature-sensitive helper plasmid and a RepA(-) cloning vector to overcome these problems while maintaining the food-grade status of the native plasmid. This strategy was used to precisely delete ltnA1 alone, or in conjunction with ltnA2 (encoding the structural proteins of the lantibiotic lacticin 3147), from the native 60.2-kb plasmid pMRC01 and to select for the transfer of pMRC01 between Lactococcus lactis strains.     

Biological and molecular characterization of a two-peptide lantibiotic produced by Lactococcus lactis IFPL105

The lactic acid bacterium Lactococcus lactis IFPL105 secretes a broad spectrum bacteriocin produced from the 46 kb plasmid pBAC105. The bacteriocin was purified to homogeneity by ionic and hydrophobic exchange and reverse-phase chromatography. Bacteriocin activity required the complementary action of two distinct peptides (alpha and beta) with average molecular masses of 3322 and 2848 Da, respectively. The genes encoding the two peptides were cloned and sequenced and were found to be identical to the ltnAB genes from plasmid pMRC01 of L. lactis DPC3147. LtnA and LtnB contain putative leader peptide sequences similar to the known 'double glycine' type. The predicted amino acid sequence of mature LtnA and LtnB differed from the amino acid content determined for the purified alpha and beta peptides in the residues serine, threonine, cysteine and alanine. Post-translational modification, and the formation of lanthionine or methyllanthionine rings, could partly explain the difference. Hybridization experiments showed that the organization of the gene cluster in pBAC105 responsible for the production of the bacteriocin is similar to that in pMRC01, which involves genes encoding modifying enzymes for lantibiotic biosynthesis and dual-function transporters. In both cases, the gene clusters are flanked by IS946 elements, suggesting an en bloc transposition. The findings from the isolation and molecular characterization of the bacteriocin provide evidence for the lantibiotic nature of the two peptides.     

A Food-Grade Approach for Functional Analysis and Modification of Native Plasmids in Lactococcus lactis

While plasmids from lactic acid bacteria possess many traits that are of industrial value, their exploitation is often frustrated by an inability to conduct food-grade engineering of native plasmids or to readily screen for their transfer. Here we describe a system that uses a RepA⁺ temperature-sensitive helper plasmid and a RepA⁻ cloning vector to overcome these problems while maintaining the food-grade status of the native plasmid. This strategy was used to precisely delete ltnA1 alone, or in conjunction with ltnA2 (encoding the structural proteins of the lantibiotic lacticin 3147), from the native 60.2-kb plasmid pMRC01 and to select for the transfer of pMRC01 between Lactococcus lactis strains.     

Exploitation of plasmid pMRC01 to direct transfer of mobilizable plasmids into commercial lactococcal starter strains

Genetic analysis of the 60.2-kb lactococcal plasmid pMRC01 revealed a 19.6-kb region which includes putative genes for conjugal transfer of the plasmid and a sequence resembling an origin of transfer (oriT). This oriT-like sequence was amplified and cloned on a 312-bp segment into pCI372, allowing the resultant plasmid, pRH001, to be mobilized at a frequency of 3.4 x 10(-4) transconjugants/donor cell from an MG1363 (recA mutant) host containing pMRC01. All of the resultant chloramphenicol-resistant transconjugants contained both pRH001 and genetic determinants responsible for bacteriocin production and immunity of pMRC01. This result is expected, given that transconjugants lacking the lacticin 3147 immunity determinants (on pMRC01) would be killed by bacteriocin produced by the donor cells. Indeed, incorporation of proteinase K in the mating mixture resulted in the isolation of transformants, of which 47% were bacteriocin deficient. Using such an approach, the oriT-containing fragment was exploited to mobilize pRH001 alone to a number of lactococcal hosts. These results demonstrate that oriT of pMRC01 has the potential to be used in the development of mobilizable food-grade vectors for the genetic enhancement of lactococcal starter strains, some of which may be difficult to transform.     

Sequence and analysis of the 60 kb conjugative, bacteriocin-producing plasmid pMRC01 from Lactococcus lactis DPC3147

The complete sequence of pMRC01, a large conjugative plasmid from Lactococcus lactis ssp. lactis DPC3147, has been determined. Using a shotgun sequencing approach, the 60 232 bp plasmid sequence was obtained by the assembly of 1056 underlying sequences (sevenfold average redundancy). Sixty-four open reading frames (ORFs) were identified. Analysis of the gene organization of pMRC01 suggests that the plasmid can be divided into three functional domains, with each approximately 20 kb region separated by insertion sequence (IS) elements. The three regions are (i) the conjugative transfer region, including a 16-gene Tra (transfer) operon; (ii) the bacteriocin production region, including an operon responsible for the synthesis of the novel bacteriocin lacticin 3147; and (iii) the phage resistance and plasmid replication region of the plasmid. The complete sequence of pMRC01 provides important information about these industrially relevant phenotypes and gives insight into the structure, function and evolution of large Gram-positive conjugative plasmids in general. The completely sequenced pMRC01 plasmid should also provide a useful framework for the design of novel plasmids to be incorporated into starter strain improvement programmes for the dairy industry.     

Exploitation of Plasmid pMRC01 To Direct Transfer of Mobilizable Plasmids into Commercial Lactococcal Starter Strains

Genetic analysis of the 60.2-kb lactococcal plasmid pMRC01 revealed a 19.6-kb region which includes putative genes for conjugal transfer of the plasmid and a sequence resembling an origin of transfer (oriT). This oriT-like sequence was amplified and cloned on a 312-bp segment into pCI372, allowing the resultant plasmid, pRH001, to be mobilized at a frequency of 3.4 × 10⁻⁴ transconjugants/donor cell from an MG1363 (recA mutant) host containing pMRC01. All of the resultant chloramphenicol-resistant transconjugants contained both pRH001 and genetic determinants responsible for bacteriocin production and immunity of pMRC01. This result is expected, given that transconjugants lacking the lacticin 3147 immunity determinants (on pMRC01) would be killed by bacteriocin produced by the donor cells. Indeed, incorporation of proteinase K in the mating mixture resulted in the isolation of transformants, of which 47% were bacteriocin deficient. Using such an approach, the oriT-containing fragment was exploited to mobilize pRH001 alone to a number of lactococcal hosts. These results demonstrate that oriT of pMRC01 has the potential to be used in the development of mobilizable food-grade vectors for the genetic enhancement of lactococcal starter strains, some of which may be difficult to transform.     

Complete alanine scanning of the two-component lantibiotic lacticin 3147: generating a blueprint for rational drug design

Lantibiotics are post-translationally modified antimicrobial peptides which are active at nanomolar concentrations. Some lantibiotics have been shown to function by targeting lipid II, the essential precursor of cell wall biosynthesis. Given that lantibiotics are ribosomally synthesized and amenable to site-directed mutagenesis, they have the potential to serve as biological templates for the production of novel peptides with improved functionalities. However, if a rational approach to novel lantibiotic design is to be adopted, an appreciation of the roles of each individual amino acid (and each domain) is required. To date no lantibiotic has been subjected to such rigorous analysis. To address this issue we have carried out complete scanning mutagenesis of each of the 59 amino acids in lacticin 3147, a two-component lantibiotic which acts through the synergistic activity of the peptides LtnA1 (30 amino acids) and LtnA2 (29 amino acids). All mutations were performed in situ in the native 60 kb plasmid, pMRC01. A number of mutations resulted in the elimination of detectable bioactivity and seem to represent an invariable core within these and related peptides. Significantly however, of the 59 amino acids, at least 36 can be changed without resulting in a complete loss of activity. Many of these are clustered to form variable domains within the peptides. The information generated in this study represents a blue-print that will be critical for the rational design of lantibiotic-based antimicrobial compounds.     

Structural characterization of lacticin 3147, a two-peptide lantibiotic with synergistic activity

Lantibiotics are antibacterial peptides isolated from bacterial sources that exhibit activity toward Gram-positive organisms and are usually several orders of magnitude more potent than traditional antibiotics such as penicillin. They contain a number of unique structural features including dehydro amino acid and lanthionine (thioether) residues. Introduced following ribosomal translation of the parent peptide, these moieties render conventional methods of peptide analysis ineffective. We report herein a new method using nickel boride (Ni(2)B), in the presence of deuterium gas, to reduce dehydro side chains and reductively desulfurize lanthionine bridges found in lantibiotics. Using this approach, it is possible to identify and distinguish the original locations of dehydro side chains and lanthionine bridges by traditional peptide sequencing (Edman degradation) followed by mass spectrometry. The strategy was initially verified using nisin A, a structurally well characterized lantibiotic, and subsequently extended to the novel two-component lantibiotic, lacticin 3147, produced by Lactococcus lactis subspecies lactis DPC3147. The primary structures of both lacticin 3147 peptides were then fully assigned by use of multidimensional NMR spectroscopy, showing that lacticin 3147 A1 has a specific lanthionine bridging pattern which resembles the globular type-B lantibiotic mersacidin, whereas the A2 peptide is a member of the elongated type-A lantibiotic class. Also obtained by NMR were solution conformations of both lacticin 3147 peptides, indicating that A1 may adopt a conformation similar to that of mersacidin and that the A2 peptide adopts alpha-helical structure. These results are the first of their kind for a synergistic lantibiotic pair (only four such pairs have been reported to date).     

A system for the random mutagenesis of the two-peptide lantibiotic lacticin 3147: analysis of mutants producing reduced antibacterial activities

Lantibiotics are antimicrobial peptides that contain several unusual amino acids resulting from a series of enzyme-mediated posttranslational modifications. As a consequence of being gene-encoded, the implementation of peptide bioengineering systems has the potential to yield lantibiotic variants with enhanced chemical and physical properties. Here we describe a functional two-plasmid expression system which has been developed to allow random mutagenesis of the two-component lantibiotic, lacticin 3147. One of these plasmids contains a randomly mutated version of the two structural genes, ltnA1 and ltnA2, and the associated promoter, Pbac, while the other encodes the remainder of the proteins required for the biosynthesis of, and immunity to, lacticin 3147. To test this system, a bank of approximately 1,500 mutant strains was generated and screened to identify mutations that have a detrimental impact on the bioactivity of lacticin 3147. This strategy established/confirmed the importance of specific residues in the structural peptides and their associated leaders and revealed that a number of alterations which mapped to the -10 or -35 regions of Pbac abolished promoter activity.     

Application and evaluation of the phage resistance- and bacteriocin-encoding plasmid pMRC01 for the improvement of dairy starter cultures.

The conjugative 63-kb lactococcal plasmid pMRC01 encodes bacteriophage resistance and production of and immunity to a novel broad-spectrum bacteriocin, designated lacticin 3147 (M.P. Ryan, M.C. Rea, C. Hill, and R.P. Ross, Appl. Environ. Microbiol. 62:612-619, 1996). The phage resistance is an abortive infection mechanism which targets the phage-lytic cycle at a point after phage DNA replication. By using the genetic determinants for bacteriocin immunity encoded on the plasmid as a selectable marker, pMRC01 was transferred into a variety of lactococcal starter cultures to improve their phage resistance properties. Selection of resulting transconjugants was performed directly on solid media containing the bacteriocin. Since the starters exhibited no spontaneous resistance to the bacteriocin as a selective agent, this allowed the assessment of the transfer of the naturally occurring plasmid into a range of dairy starter cultures. Results demonstrate that efficient transfer of the plasmid was dependent on the particular recipient strain chosen, and while high-frequency transfer (10(-3) per donor) of the entire plasmid to some strains was observed, the plasmid could not be conjugated into a number of starters. In this study, transconjugants for a number of lactococcal starter cultures which are phage resistant and bacteriocin producing have been generated. This bacteriocin-producing phenotype allows for control of nonstarter flora in food fermentations, and the phage resistance property protects the starter cultures in industry. The 63-kb plasmid was also successfully transferred into Lactococcus lactis MG1614 cells via electroporation.     

Evaluation of Lacticin 3147 and a Teat Seal Containing This Bacteriocin for Inhibition of Mastitis Pathogens

Lacticin 3147 is a broad-spectrum bacteriocin produced by Lactococcus lactis subsp. lactis DPC3147 which is bactericidal against a range of mastitis-causing streptococci and staphylococci. In this study, both lacticin 3147 and the lantibiotic nisin were separately incorporated into an intramammary teat seal product. The seal containing lacticin 3147 exhibited excellent antimicrobial activity and might form the basis of an improved treatment for the prevention of mastitis in dry cows.     

Saturation mutagenesis of selected residues of the α‐peptide of the lantibiotic lacticin 3147 yields a derivative with enhanced antimicrobial activity

The lantibiotic lacticin 3147 consists of two ribosomally synthesized and post‐translationally modified antimicrobial peptides, Ltnα and Ltnβ, which act synergistically against a wide range of Gram‐positive microorganisms. We performed saturation mutagenesis of specific residues of Ltnα to determine their functional importance. The results establish that Ltnα is more tolerant to change than previously suggested by alanine scanning mutagenesis. One substitution, LtnαH23S, was identified which improved the specific activity of lacticin 3147 against one pathogenic strain, Staphylococcus aureus NCDO1499. This represents the first occasion upon which the activity of a two peptide lantibiotic has been enhanced through bioengineering.     

Subtle genetic changes enhance virulence of methicillin resistant and sensitive Staphylococcus aureus

Background

Two component lantibiotics, such as the plasmid-encoded lacticin 3147 produced by Lactococcus lactis DPC3147 and staphylococcin C55 produced by Staphylococcus aureus C55, represent an emerging subgroup of bacteriocins. These two bacteriocins are particularly closely related, exhibiting 86% (LtnA1 and C55α) and 55% (LtnA2 and C55β) identity in their component peptides. The aim of this study was to investigate, for the first time for any two component bacteriocins, the significance of the relatedness between these two systems.

Results

So close is this relatedness that the hybrid peptide pairs LtnA1:C55β and C55α:LtnA2 were found to have activities in the single nanomolar range, comparing well with the native pairings. To determine whether this flexibility extended to the associated post-translational modification/processing machinery, the staphylococcin C55 structural genes were directly substituted for their lacticin 3147 counterparts in the ltn operon on the large conjugative lactococcal plasmid pMRC01. It was established that the lacticin LtnA1 post-translational and processing machinery could produce functionally active C55α, but not C55β. In order to investigate in closer detail the significance of the differences between LtnA1 and C55α, three residues in LtnA1 were replaced with the equivalent residues in C55α. Surprisingly, one such mutant LtnA1-Leu21Ala was not produced. This may be significant given the positioning of this residue in a putative lipid II binding loop.

Conclusion

It is apparent, despite sharing striking similarities in terms of structure and activity, that these two complex bacteriocins display some highly dedicated features particular to either system.     

Comparison of the Potency of the Lipid II Targeting Antimicrobials Nisin, Lacticin 3147 and Vancomycin Against Gram-Positive Bacteria

While nisin (lantibiotic), lacticin 3147 (lantibiotic) and vancomycin (glycopeptides) are among the best studied lipid II-binding antimicrobials, their relative activities have never been compared. Nisin and lacticin 3147 have been employed/investigated primarily as food preservatives, although they do have potential in terms of veterinary and clinical applications. Vancomycin is used exclusively in clinical therapy. We reveal a higher potency for lacticin 3147 (MIC 0.95?C3.8???g/ml) and vancomycin (MIC 0.78?C1.56???g/ml) relative to that of nisin (MIC 6.28?C25.14???g/ml) against the food-borne pathogen Listeria monocytogenes. A comparison of the activity of the three antimicrobials against nisin resistance mutants of L. monocytogenes also reveals that their susceptibility to vancomycin and lacticin 3147 changed only slightly or not at all. A further assessment of relative activity against a selection of Bacillus cereus, Enterococcus and Staphylococcus aureus targets revealed that vancomycin MICs consistently ranged between 0.78 and 1.56???g/ml against all but one strain. Lacticin 3147 was found to be more effective than nisin against B. cereus (lacticin 3147 MIC 1.9?C3.8???g/ml; nisin MIC 4.1?C16.7???g/ml) and E. faecium and E. faecalis targets (lacticin 3147 MIC from 1.9 to 3.8???g/ml; nisin MIC ??8.3???g/ml). The greater effectiveness of lacticin 3147 is even more impressive when expressed as molar values. However, in agreement with the previous reports, nisin was the more effective of the two lantibiotics against S. aureus strains. This study highlights that in many instances the antimicrobial activity of these leading lantibiotics are comparable with that of vancomycin and emphasizes their particular value with respect to use in situations including foods and veterinary medicine, where the use of vancomycin is not permitted.     

Strategy for manipulation of cheese flora using combinations of lacticin 3147-producing and -resistant cultures

The aim of the present study was to develop adjunct strains which can grow in the presence of bacteriocin produced by lacticin 3147-producing starters in fermented products such as cheese. A Lactobacillus paracasei subsp. paracasei strain (DPC5336) was isolated from a well-flavored, commercial cheddar cheese and exposed to increasing concentrations (up to 4,100 arbitrary units [AU]/ml) of lantibiotic lacticin 3147. This approach generated a stable, more-resistant variant of the isolate (DPC5337), which was 32 times less sensitive to lacticin 3147 than DPC5336. The performance of DPC5336 was compared to that of DPC5337 as adjunct cultures in two separate trials using either Lactococcus lactis DPC3147 (a natural producer) or L. lactis DPC4275 (a lacticin 3147-producing transconjugant) as the starter. These lacticin 3147-producing starters were previously shown to control adventitious nonstarter lactic acid bacteria in cheddar cheese. Lacticin 3147 was produced and remained stable during ripening, with levels of either 1,280 or 640 AU/g detected after 6 months of ripening. The more-resistant adjunct culture survived and grew in the presence of the bacteriocin in each trial, reaching levels of 10(7) CFU/g during ripening, in contrast to the sensitive strain, which was present at levels 100- to 1,000-fold lower. Furthermore, randomly amplified polymorphic DNA-PCR was employed to demonstrate that the resistant adjunct strain comprised the dominant microflora in the test cheeses during ripening.     

Mechanistic Dissection of the Enzyme Complexes Involved in Biosynthesis of Lacticin 3147 and Nisin

The thioether rings in the lantibiotics lacticin 3147 and nisin are posttranslationally introduced by dehydration of serines and threonines, followed by coupling of these dehydrated residues to cysteines. The prepeptides of the two-component lantibiotic lacticin 3147, LtnA1 and LtnA2, are dehydrated and cyclized by two corresponding bifunctional enzymes, LtnM1 and LtnM2, and are subsequently processed and exported via one bifunctional enzyme, LtnT. In the nisin synthetase complex, the enzymes NisB, NisC, NisT, and NisP dehydrate, cyclize, export, and process prenisin, respectively. Here, we demonstrate that the combination of LtnM2 and LtnT can modify, process, and transport peptides entirely different from LtnA2 and that LtnT can process and transport unmodified LtnA2 and unrelated peptides. Furthermore, we demonstrate a higher extent of NisB-mediated dehydration in the absence of thioether rings. Thioether rings apparently inhibited dehydration, which implies alternating actions of NisB and NisC. Furthermore, certain (but not all) NisC-cyclized peptides were exported with higher efficiency as a result of their conformation. Taken together, these data provide further insight into the applicability of Lactococcus lactis strains containing lantibiotic enzymes for the design and production of modified peptides.