The Fe-only nitrogenase and the Mo nitrogenase from Rhodobacter capsulatus: a comparative study on the redox properties of the metal clusters present in the dinitrogenase components.

The dinitrogenase component proteins of the conventional Mo nitrogenase (MoFe protein) and of the alternative Fe-only nitrogenase (FeFe protein) were both isolated and purified from Rhodobacter capsulatus, redox-titrated according to the same procedures and subjected to an EPR spectroscopic comparison. In the course of an oxidative titration of the MoFe protein (Rc1Mo) three significant S = 1/2 EPR signals deriving from oxidized states of the P-cluster were detected: (1) a rhombic signal (g = 2.07, 1.96 and 1.83), which showed a bell-shaped redox curve with midpoint potentials (Em) of -195 mV (appearance) and -30 mV (disappearance), (2) an axial signal (g(parallel) = 2.00, g perpendicular = 1.90) with almost identical redox properties and (3) a second rhombic signal (g = 2.03, 2.00, 1.90) at higher redox potentials (> 100 mV). While the 'low-potential' rhombic signal and the axial signal have been both attributed to the one-electron-oxidized P-cluster (P1+) present in two conformationally different proteins, the 'high-potential' rhombic signal has been suggested rather to derive from the P3+ state. Upon oxidation, the FeFe protein (Rc1Fe) exhibited three significant S = 1/2 EPR signals as well. However, the Rc1Fe signals strongly deviated from the MoFe protein signals, suggesting that they cannot simply be assigned to different P-cluster states. (a) The most prominent feature is an unusually broad signal at g = 2.27 and 2.06, which proved to be fully reversible and to correlate with catalytic activity. The cluster giving rise to this signal appears to be involved in the transfer of two electrons. The midpoint potentials determined were: -80 mV (appearance) and 70 mV (disappearance). (b) Under weakly acidic conditions (pH 6.4) a slightly altered EPR signal occurred. It was characterized by a shift of the g values to 2.22 and 2.05 and by the appearance of an additional negative absorption-shaped peak at g = 1.86. (c) A very narrow rhombic EPR signal at g = 2.00, 1.98 and 1.96 appeared at positive redox potentials (Em = 80 mV, intensity maximum at 160 mV). Another novel S = 1/2 signal at g = 1.96, 1.92 and 1.77 was observed on further, enzymatic reduction of the dithionite-reduced state of Rc1Fe with the dinitrogenase reductase component (Rc2Fe) of the same enzyme system (turnover conditions in the presence of N2 and ATP). When the Rc1Mo protein was treated analogously, neither this 'turnover signal' nor any other S = 1/2 signal were detectable. All Rc1Fe-specific EPR signals detected are discussed and tentatively assigned with special consideration of the reference spectra obtained from Rc1Mo preparations.     

FeMo cofactor biosynthesis in a nifE- mutant of Rhodobacter capsulatus.

In all diazotrophic micro-organisms investigated so far, mutations in nifE, one of the genes involved in the biosynthesis of the FeMo cofactor (FeMoco), resulted in the accumulation of cofactorless inactive dinitrogenase. In this study, we have found that strains of the phototrophic non-sulfur purple bacterium Rhodobacter capsulatus with mutations in nifE, as well as in the operon harbouring the nifE gene, were capable of reducing acetylene and growing diazotrophically, although at distinctly lower rates than the wild-type strain. The diminished rates of substrate reduction were found to correlate with the decreased amounts of the dinitrogenase component (MoFe protein) expressed in R. capsulatus. The in vivo activity, as measured by the routine acetylene-reduction assay, was strictly Mo-dependent. Maximal activity was achieved under diazotrophic growth conditions and by supplementing the growth medium with molybdate (final concentration 20-50 microM). Moreover, in these strains a high proportion of ethane was produced from acetylene ( approximately 10% of ethylene) in vivo. However, in in vitro measurements with cell-free extracts as well as purified dinitrogenase, ethane production was always found to be less than 1%. The isolation and partial purification of the MoFe protein from the nifE mutant strain by Q-Sepharose chromatography and subsequent analysis by EPR spectroscopy and inductively coupled plasma MS revealed that FeMoco is actually incorporated into the protein (1.7 molecules of FeMoco per tetramer). On the basis of the results presented here, the role of NifNE in the biosynthetic pathway of the FeMoco demands reconsideration. It is shown for the first time that NifNE is not essential for biosynthesis of the cofactor, although its presence guarantees formation of a higher content of intact FeMoco-containing MoFe protein molecules. The implications of our findings for the biosynthesis of the FeMoco will be discussed.     

Purification and characterization of the alternative nitrogenase from the photosynthetic bacterium Rhodospirillum rubrum.

The alternative nitrogenase from a nifH mutant of the photosynthetic bacterium Rhodospirillum rubrum has been purified and characterized. The dinitrogenase protein (ANF1) contains three subunits in an apparent alpha2beta2gamma2 structure and contains Fe but no Mo or V. A factor capable of activating apo-dinitrogenase (lacking the FeMo cofactor) from Azotobacter vinelandii was extracted from the alternative dinitrogenase protein with N-methylformamide. The electron paramagnetic resonance (EPR) signal of the dinitrogenase protein is not characteristic of the EPR signals of molybdenum- or vanadium-containing dinitrogenases. The alternative dinitrogenase reductase (ANF2) was purified as an alpha2 dimer containing an Fe4S4 cluster and exhibited an EPR spectrum characteristic of dinitrogenase reductases. The enzyme complex reduces protons to H2 very well but reduces N2 to ammonium poorly. Acetylene is reduced to a mixture of ethylene and ethane.     

Solubilization of the iron molybdenum cofactor of Azotobacter vinelandii nitrogenase in dimethylformamide and acetonitrile

The iron molybdenum cofactor of Azotobacter vinelandii nitrogenase has been solubilized for the first time in dimethylformamide and acetonitrile. These solutions have the ability to reconstitute the inactive nitrogenase of the UW 45 mutant of A. vinelandii and exhibit an S = 3/2 EPR signal similar to that for the cofactor in N-methylformamide. Our ability to obtain solutions of FeMoco in these solvents seemingly refutes a previous hypothesis concerning the necessity of solvents with a dissociable proton for iron molybdenum cofactor solubility and should facilitate the spectroscopic characterization of this important species.     

Measurement of the oxidation reduction potential of the EPR detectable active centre of the molybdenum iron protein of Chromatium nitrogenase

The midpoint oxidation-reduction potential of the EPR detectable centre of the molybdenum iron protein of Chromatium nitrogenase has been measured. Two centres with identical EPR spectra but different midpoint potentials were detected. The measured midpoint potentials are (1) Em_7.5 = ?60 mV and (2) Em_7.5 = ?260 mV. The midpoint potentials were not affected by other components of the nitrogen fixing system.     

N2O reduction and HD formation by nitrogenase from a nifV mutant of Klebsiella pneumoniae.

Dinitrogenase from a nifV mutant of Klebsiella pneumoniae contains an altered form of iron-molybdenum cofactor (FeMoco) that lacks a biologically active homocitric acid molecule. Change in the composition of FeMoco led to substantial variation in the kinetics of nitrogenase action. The KmS of the mutant enzyme for N2 and N2O were 0.244 and 0.175 atm (24,714 and 17,726 kPa), respectively. The km for N2 was higher and the Km for N2O was lower than that for the wild-type enzyme. The mutant enzyme was ineffective in N2 fixation, in N2O reduction, and in HD formation, as indicated by the low Vmax of these reactions with saturating levels of substrate and under conditions of saturating electron flux. These observations provide further support for the concept that N2, N2O, and D2 interact with the same form of dinitrogenase. H2 evolution by the mutant enzyme is only partially inhibited by CO. Observation that different numbers of electrons are stored in CO-inhibited than in noninhibited dinitrogenase before H2 is released suggests that the mutant enzyme has more sites responsible for H2 evolution than the wild-type enzyme, whose H2 evolution is not inhibited by CO.     

Nitrogenase from nifV mutants of Klebsiella pneumoniae contains an altered form of the iron-molybdenum cofactor.

When the iron-molybdenum cofactor (FeMoco) was extracted from the MoFe protein of nitrogenase from a nifV mutant of Klebsiella pneumoniae and combined with the FeMoco-deficient MoFe protein from a nifB mutant, the resultant MoFe protein exhibited the NifV phenotype, i.e. in combination with wild-type Fe protein it exhibited poor N2-fixation activity and its H2-evolution activity was inhibited by CO. These data provide strong evidence that FeMoco contains the active site of nitrogenase. The metal contents and e.p.r. properties of FeMoco from wild-type and nifV mutants of K. pneumoniae are very similar.     

Iron-molybdenum cofactor from nitrogenase. Modified extraction methods as probes for composition

Five modifications of the preparative procedure for isolating iron-molybdenum cofactor (FeMoco) from the molybdenum-iron (MoFe) protein of Azotobacter vinelandii nitrogenase have been developed. This variety of isolation methods has established that no single component of the original isolation protocol, i.e. Tris, Cl-, citrate, HPO4(2-), N,N-dimethylformamide, and N-methylformamide, is essential for the effective isolation and/or structural stability of FeMoco, although any of them may act as ligands to FeMoco when present. The acid-bse status (effective pH) of the extracting solvent is a key adjustable parameter in the isolation procedure. The new procedures produced FeMoco with yields, metal analysis, charge, EPR spectrum, and specific activity (after reconstituting crude extracts from A. vinelandii UW45 mutant cells) essentially identical with FeMoco isolated by the original procedure. After purification, FeMoco apparently contains molybdenum, iron, and sulfide in a 1:7:4 ratio with N-methylformamide as a ligand but no amino acid residues, common sugars, coenzyme A, or lipoic acid. Reaction with o-phenanthroline allows quantitation of both adventitious and FeMoco-associated iron. Correlations of total activity after UW45 reconstitution with molybdenum, total iron, and o-phenanthroline-resistant iron contents show that only the last gives a consistent relationship of 35 +/- 5 nmol of C2H4/min/ng atom of Fe. Both o-phenanthroline and EDTA interact with FeMoco to abolish its EPR signal in reactions reversible by additions of Fe2+ or Zn2+, respectively. These and related reactions point against the presence of an endogenous organic component in FeMoco and toward the presence of exogenous ligands and imply a relatively labile coordination sphere whose nature may be determinable by a systematic investigation.     

Changes in the EPR signal of dinitrogenase from Azotobacter vinelandii during the lag period before hydrogen evolution begins.

During the lag period before H2 is evolved by the nitrogenase system, the EPR signal of dinitrogenase decreases steadily, indicating transfer of electrons into dinitrogenase. The rate constant for the decrease in amplitude of the EPR signal, the steady state rate of H2 evolution from nitrogenase, and the length of the lag period have been measured. The data suggest that H2 is evolved only after dinitrogenase has been reduced by 2 electrons/molybdenum. The electrons that have been transfered into dinitrogenase during the lag period are not evolved as H2 upon denaturation of dinitrogenase. The existence of a lag indicates that the two nitrogenase proteins dissociate after every electron transfer. The lag occurs and the nitrogenase proteins dissociate under a variety of conditions of pH and temperature.     

Molecular insights into nitrogenase FeMoco insertion--the role of His 274 and His 451 of MoFe protein alpha subunit

The final step of FeMo cofactor (FeMoco) assembly involves the insertion of FeMoco into its binding site in the molybdenum-iron (MoFe) protein of nitrogenase. Here we examine the role of His alpha274 and His alpha451 of Azotobacter vinelandii MoFe protein in this process. Our results from combined metal, activity, EPR, stability and insertion analyses show that mutations of His alpha274 and/or His alpha451, two of the histidines that belong to a so-called His triad, to small uncharged Ala specifically reduce the accumulation of FeMoco in MoFe protein. This observation indicates that the enrichment of histidines at the His triad is important for FeMoco insertion and that the His triad potentially serves as an intermediate docking point for FeMoco through transitory ligand coordination and/or electrostatic interaction.     

Oxidation-reduction properties and complexation reactions of the iron-molybdenum cofactor of nitrogenase

The interactions of the iron-molybdenum cofactor, FeMoco, isolated from acid-treated Azotobacter vinelandii molybdenum-iron protein (Av1) with EDTA and thiophenol in N-methylformamide solution have been reinvestigated. Our studies show that EDTA alone is sufficient to eliminate the EPR signal of dithionite-reduced FeMoco. Neither light/5-deazaflavin nor carbon monoxide are required, which implies that this EPR-silent form of FeMoco does not correspond to the EPR-silent, substrate-reducing state of Av1. As EDTA-treated FeMoco does not regain EPR activity on addition of sodium dithionite or thiophenol, it is apparently distinct from the EPR-silent form of either dye-oxidized FeMoco or dye-oxidized Av1. Thiophenol sharpens the EPR signal of dithionite-reduced FeMoco and shifts the g = 3.3 feature to g = 3.6. This shift is complete at 1:1 ratio of thiophenol/Mo atom, while the EDTA effect requires about 40 molecules/Mo atom. Thiophenol and EDTA probably affect different sites of FeMoco. The binding of either reactant does not affect the activity of FeMoco as measured by its ability to reconstitute extracts of A. vinelandii mutant UW45.     

Novel EPR signals associated with FeMoco centres of MoFe protein in MgADP-inhibited turnover of nitrogenase

Two novel electron paramagnetic resonance (EPR) signals arising from the [1Mo-7Fe-9S-homocitrate] (FeMoco) centres of MoFe protein of Klebsiella pneumoniae nitrogenase (Kp1) were observed following turnover under MgATP-limited conditions. The combination of the nitrogenase Fe protein of Clostridium pasteurianum showed similar signals. The accumulation of MgADP under these conditions causes the normal EPR signal of dithionite-reduced Kp1 (with g=4.3, 3.6, 2.01) to be slowly converted to novel signals with g=4.74, 3.32, 2.00 and g=4.58, 3.50, 1.99. These signals do not form in incubation of protein mixtures containing only MgADP, thus they may be associated with trapped intermediates of the catalytic cycle.     

Electrostatic interactions between FeS clusters in NADH:ubiquinone oxidoreductase (Complex I) from Escherichia coli

The redox properties of the cofactors of NADH:ubiquinone oxidoreductase (complex I) from Escherichia coli were studied by following the changes in electron paramagnetic resonance (EPR) and optical spectra upon electrochemical redox titration of the purified protein. At neutral pH, the FMN cofactor had a midpoint redox potential ( E m) approximately -350 mV ( n = 2). Binuclear FeS clusters were well-characterized: N1a was titrated with a single ( n = 1) transition, and E m = -235 mV. In contrast, the titration of N1b can only be fitted with the sum of at least two one-electron Nernstian curves with E m values of -245 and -320 mV. The tetranuclear clusters can also be separated into two groups, either having a single, n = 1, or more complex redox titration curves. The titration curves of the EPR bands attributed to the tetranuclear clusters N2 ( g = 2.045 and g = 1.895) and N6b ( g = 2.089 and g = 1.877) can be presented by the sum of at least two components, each with E m (app) approximately -200/-300 mV and -235/-315 mV, respectively. The titration of the signals at g = 1.956-1.947 (N3 or N7, E m = -315 mV), g = 2.022, and g = 1.932 (Nx, -365 mV) and the low temperature signal at g = 1.929 (N4 or N5, -330 mV) followed Nernstian n = 1 curves. The observed redox titration curves are discussed in terms of intrinsic electrostatic interactions between FeS centers in complex I. A model showing shifts of E m due to the electrostatic interaction between the centers is presented.     

Regulation of dinitrogenase reductase ADP-ribosyltransferase and dinitrogenase reductase-activating glycohydrolase by a redox-dependent conformational change of nitrogenase Fe protein

The nitrogenase-regulating enzymes dinitrogenase reductase ADP-ribosyltransferase (DRAT) and dinitrogenase reductase-activating glycohydrolase (DRAG), from Rhodospirillum rubrum, were shown to be sensitive to the redox status of the [Fe(4)S(4)](1+/2+) cluster of nitrogenase Fe protein from R. rubrum or Azotobacter vinelandii. DRAG had <2% activity with oxidized R. rubrum Fe protein relative to activity with reduced Fe protein. The activity of DRAG with oxygen-denatured Fe protein or a low molecular weight substrate, N(alpha)-dansyl-N(omega)-(1,N(6)-etheno-ADP-ribosyl)-arginine methyl ester, was independent of redox potential. The redox midpoint potential of DRAG activation of Fe protein was -430 mV versus standard hydrogen electrode, coinciding with the midpoint potential of the [Fe(4)S(4)] cluster from R. rubrum Fe protein. DRAT was found to have a specificity opposite that of DRAG, exhibiting low (<20%) activity with 87% reduced R. rubrum Fe protein relative to activity with fully oxidized Fe protein. A mutant of R. rubrum in which the rate of oxidation of Fe protein was substantially decreased had a markedly slower rate of ADP-ribosylation in vivo in response to 10 mM NH(4)Cl or darkness stimulus. It is concluded that the redox state of Fe protein plays a significant role in regulation of the activities of DRAT and DRAG in vivo.     

固氮酶铁钼辅基在分离纯化中结构变化的新证据

根据Ｋｉｍ－Ｒｅｅｓ模型［１］,固氮酶铁钼辅基（即ＦｅＭｏｃｏ或Ｍ簇）,是由一个ＭｏＦｅ３Ｓ３簇和一个Ｆｅ４Ｓ３簇通过三个Ｓ－桥联接而成．然而,自Ｓｈａｈ等（１９７７）首次从结晶的钼铁蛋白中分离出具有生物重组活性的ＦｅＭｏｃｏ以来,固氮研究者们一直致...     

A facile method of isolation for the iron molybdenum cofactor of nitrogenase and bacterial ferritin from extracts of azotobacter vinelandii

An alternative method has been developed for the isolation of both the iron molybdenum cofactor of nitrogenase (FeMoco), a small molecular weight FeMoS cluster which is the putative nitrogen- reducing site of the enzyme, and bacterioferritin, an iron storage protein similar to other ferritins, but containing heme prosthetic groups. Previously the isolation of these two species, the characterization of which is of significant current interest, has been dependent on the purification of the nitrogenase enzyme from Azotobacter vinelandii. Out new procedure eliminates the use of the anaerobic column chromatography necessary to obtain pure nitrogenase components, involving instead the heat and RNAase/ DNAase treatment of crude extracts of ruptured cells followed by sedimentation (150000 × g for 18 h) of both the 'nitrogenase complex' and bacterioferritin. The redissolved pellet from this centrifugation yields the pure crystalline bacterioferritin on addition of Mg²⁺. and cooling, the iron content of the protein being higher by this method than in previous reports. Likewise, denaturation by acid/base treatment of this protein mixture yields a precipitate which can be extracted with either N-methylformamide or N,N-dimethylformamide containing dithionite ion to yield solutions of FeMoco, as evidenced by UW 45 reconstitution and EPR spectral criteria. Unfortunately, preparations of FeMoco obtained by this method have a variable, but consistently low, Fe/Mo ratio and additional visible spectral features, indicating that they are significantly less pure than that those generated from purified nitrogenase. The aqueous supernatant from the denaturation also yields bacterioferritin, but with a lower iron content than that from the direct crystallization method.     

Insertion of heterometals into the NifEN-associated iron–molybdenum cofactor precursor

The cofactors of Mo-, V-, Fe-dependent nitrogenases are believed to be highly homologous in structure despite the different types of heterometals (Mo, V, and Fe) they contain. Previously, a precursor form of the FeMo cofactor (FeMoco) was captured on NifEN, a scaffold protein for FeMoco biosynthesis. This all-Fe precursor closely resembles the Fe/S core structure of the FeMoco and, therefore, could reasonably serve as a precursor for all nitrogenase cofactors. Here, we report the heterologous incorporation of V and Fe into the NifEN-associated FeMoco precursor. EPR and activity analyses indicate that V and Fe can be inserted at much reduced efficiencies compared with Mo, and incorporation of both V and Fe is enhanced in the presence of homocitrate. Further, native polyacrylamide gel electrophoresis experiments suggest that NifEN undergoes a significant conformational rearrangement upon metal insertion, which allows the subsequent NifEN–MoFe protein interactions and the transfer of the cofactor between the two proteins. The combined outcome of these in vitro studies leads to the proposal of a selective mechanism that is utilized in vivo to maintain the specificity of heterometals in nitrogenase cofactors, which is likely accomplished through the redox regulation of metal mobilization by different Fe proteins (encoded by nifH, vnfH, and anfH, respectively), as well as the differential interactions between these Fe proteins and their respective scaffold proteins (NifEN and VnfEN) in the Mo-, V-, and Fe-dependent nitrogenase systems.     

Determination of ligand binding constants for the iron-molybdenum cofactor of nitrogenase: monomers, multimers, and cooperative behavior

Equilibrium titrations in N-methylformamide (NMF) of G-25 gel filtered (ox)-state FeMo cofactor [FeMoco(ox)] from Azotobacter vinelandii nitrogenase were carried out using sodium ethanethiolate and followed using UV/Vis absorption spectroscopy. For Fe-Moco(ox), a non-linear least squares (NLLSQ) fit to the data indicated a strong equilibrium thiolate-binding step with Keq = 1.3+/-0.2x10(6) M(-1). With 245 molar excess imidazole, cooperative binding of three ethanethiolates was observed. The best NLLSQ fit gave Keq=2.0+/-0.1x10(5) M(-2) and a Hill coefficient n=2.0+/-0.3. A Scatchard plot of these data was concave upward, indicating positive cooperativity. The fit to previously published data involving benzenethiol titration of the one-electron reduced (semi-reduced) cofactor, FeMoco(sr), as followed by EPR required a model that included both a sub-stoichiometric ratio of thiol to FeMoco(sr) and about five cooperative ligand binding sites. These constraints were met by modeling FeMoco(sr) as an aggregate, with fewer thiol binding sites than FeMoco(sr) units. The best fit model was that of FeMoco(sr) as a dodecamer with five cooperative benzenethiol binding sites, yielding a thiol binding constant of 3.32+/-0.09x10(4) M(-4.8) and a Hill coefficient n=4.8+/-0.6. The results of all the other published ligand titrations of FeMoco(sr) were similarly analyzed successfully in terms of equilibrium models that include both cooperative ligand binding and dimer-level aggregation. A possible structural model for FeMoco aggregation in NMF solution is proposed.     

Purification and characterization of the inactive MoFe protein (NifB-Kp1) of the nitrogenase from nifB mutants of Klebsiella pneumoniae.

The inactive MoFe protein of nitrogenase, NifB-Kp1, from two distinct nifB mutants of Klebsiella pneumoniae, Kp5058 (a nifB point mutant) and UNF1718 (a nifB, nifJ double mutant) has been purified and characterized. NifB-Kp1 can be activated by reaction with the iron-molybdenum cofactor, FeMoco, extracted from active MoFe protein. NifB-Kp1 purified from either source had similar properties and was contaminated with an approximately equimolar amount of protein of mol.wt. 21 000. Like active wild-type Kp1, it was an alpha 2 beta 2 tetramer, but it was far less stable than Kp1, deteriorating rapidly at temperatures above 8 degrees C or on mild oxidation. NifB-Kp1 preparations contained 0.4-0.9 Mo and 9.0 +/- 0.9 Fe atoms . mol-1 and, when activated by FeMoco, had a specific activity of approx. 500 units . mg-1. The Mo in our preparations was not associated with the e.p.r. signal normally observed from FeMoco. All preparations exhibited a weak gav. = 1.95 e.p.r. signal which was probably not associated with activatable protein.     

Apodinitrogenase: purification, association with a 20-kilodalton protein, and activation by the iron-molybdenum cofactor in the absence of dinitrogenase reductase

The Azotobacter vinelandii mutant strain UW45 contains a mutation in the nifB gene and produces an inactive dinitrogenase protein that can be activated by the addition of purified iron-molybdenum cofactor (FeMoco). This FeMoco-deficient dinitrogenase (Apo I) has now been purified 96-fold to greater than 95% purity and is FeMoco-activatable to 2200 nmol of C2H2 reduced/(min.mg of protein). The Apo I complex was found to contain two molecules of a 20-kDa protein, in addition to the alpha 2 beta 2 tetramer found for isolated holodinitrogenase (Holo I). The Apo I complex contained 15 +/- 2 mol of Fe per mole, but no Mo. While the presence of dinitrogenase reductase caused a 2-fold stimulation in the activation of the purified Apo I complex by FeMoco, this enhancement resulted from the stabilization of Apo I by dinitrogenase reductase to the denaturing effects of N-methylformamide. When the activation was performed in the absence of N-methylformamide, there was no enhancement by dinitrogenase reductase alone or by dinitrogenase reductase-Mg-ATP complex. The Apo I complex is more sensitive to O2 than Holo I, with a half-life in air of 6 min; however, the addition of dithiothreitol to Apo I during the exposure to air (or after exposure) resulted in a half-life very similar to that seen for Holo I. This suggests that sulfhydryl(s) is (are) important for the FeMoco-activation reaction.