Identification and characterization of Bacillus anthracis by multiplex PCR analysis of sequences on plasmids pXO1 and pXO2 and chromosomal DNA

Abstract Bacillus anthracis can be identified on the basis of the detection of virulence factor genes located on two plasmids, pXO1 and pXO2. Thus isolates lacking both pXO1 and pXO2 are indistinguishable from closely related B. cereus group bacteria. We developed a multiplex PCR assay for characterization of B. anthracis isolates, and simultaneous confirmation of the species identity independent of plasmid content. The assay amplifies lef, cya, pag (pXO1) and cap (pXO2) genes, and a B. anthracis specific chromosomal marker, giving an easy-to-read profile. This system unambiguously identified virulent (pXO1⁺/2⁺) and avirulent (pXO1⁺/2⁻, pXO1⁻/2⁺ and pXO1⁻/2⁻) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria.     

Molecular characterization of Bacillus anthracis using multiplex PCR, ERIC-PCR and RAPD

AIMS: To investigate the molecular characterization of Bacillus anthracis strains by multiplex PCR, enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR) and random amplification of polymorphic DNA (RAPD). METHODS AND RESULTS: Three primers were used to amplify the cya, cap and cereolysinAB genes in the multiplex PCR. Two distinct ERIC-PCR and RAPD fragments, which separated B. anthracis into two groups, were used as probes in Southern hybridization experiments. The probes hybridized only to the cya+ B. anthracis strains identified by the multiplex PCR. Nucleotide sequence analysis of the two cloned fragments showed they were from the pXO1 plasmid of B. anthracis. CONCLUSION: Multiplex PCR simultaneously identified isolates of the Bacillus cereus group and the B. anthracis virulence factors. ERIC-PCR and RAPD, combined with the Southern hybridization analyses, differentiated B. anthracis strains and separated them from the closely related B. cereus group bacteria. SIGNIFICANCE AND IMPACT OF THE STUDY: ERIC-PCR and RAPD assay could be effective in differentiating virulent from avirulent B. anthracis. Our results also show that the amplification of the large plasmids was allowed in the ERIC-PCR and RAPD assay.     

TnXO1, a germination-associated class II transposon from Bacillus anthracis

Bacillus anthracis harbours two virulence plasmids, pXO1 (182 kb) and pXO2 (95 kb). Whereas pXO2 harbours the cap operon coding for the capsule, pXO1 contains the pag, lef, and cya genes coding for protective antigen, lethal, and oedema factors, respectively, as well as the atxA regulatory gene. These genes are located within a 44.8 kb long pathogenicity island flanked by insertion sequences. Here, we describe the presence in the same plasmid region of an 8679 bp genetic element displaying the structural features of a class II cointegrative transposon. This element, named TnXO1, bears a transposase and a site-specific recombinase and is delineated by 38 bp terminal inverted repeats sequences similar to those of other members of this group of transposons. A putative res site has been identified in the 200 bp region between these genes. Interestingly, TnXO1 also contains the gerX operon involved in the germination of B. anthracis spores within phagocytic cells. Such close association of a mobile DNA structure with known virulence determinants in a pathogen further prompted us to look for the presence of this transposable element in other members of the Bacillus cereus sensu lato group. No instance of TnXO1 was detected outside of B. anthracis in PCR experiments, although it was found to be present in the genome sequence draft of one strain of B. cereus which has recently been shown to harbour a plasmid almost identical to pXO1.     

A DNA microarray facilitates the diagnosis of Bacillus anthracis in environmental samples

Aims:  In order to improve the diagnosis of Bacillus anthracis in environmental samples, we established a DNA microarray based on the ArrayTube technology of Clondiag.
Methods and Results:  Total DNA of a bacterial colony is randomly biotinylated and hybridized to the array. The probes on the array target the virulence genes, the genomic marker gene rpoB , as well as the selective 16S rDNA sequence regions of B. anthracis , of the Bacillus cereus group and of Bacillus subtilis . Eight B. anthracis reference strains were tested and correctly identified. Among the analysed environmental Bacillus isolates, no virulent B. anthracis strain was detected.
Conclusions:  This array clearly differentiates B. anthracis from members of the B. cereus group and other Bacillus species in environmental samples by chromosomal ( rpoB ) and plasmid markers. Additionally, recognition of B. cereus strains harbouring the toxin genes or atypical B. anthracis strains that have lost the virulence plasmids is feasible.
Significance and Impact of the Study:  The array is applicable to the complex diagnostics for B. anthracis detection in environmental samples. Because of low costs, high security and easy handling, the microarray is applicable to routine diagnostics.     

Evaluation of different methods to discriminate Bacillus anthracis from other bacteria of the Bacillus cereus group

Aims:  To evaluate different methods that are useful for rapid and definitive discrimination of Bacillus anthracis from other bacteria of the Bacillus cereus group in environmental samples like letters claimed to contain anthrax spores.
Methods and Results:  Characterized strains and bacteria from environmental samples were analysed by microbiological and molecular methods (PCR and restriction analysis). Environmental isolates often shared several microbiological features with B. anthracis , e.g. lack of β -haemolysis and phospholipase C activity, and only the gamma phage assay was specific for B. anthracis . PCR assays targeting markers from the virulence plasmids exclusively detected B. anthracis , but other PCR targets were also detected in nonanthrax isolates. Additionally, the restriction pattern in an Alu I restriction analysis of the SG-749 fragment is not 100% specific. The loci used for multiple-locus variable-number tandem repeat analysis of B. anthracis are also present in other members of the B. cereus group, but amplicon sizes are usually different.
Conclusions:  Environmental samples often contain borderline isolates closely related to B. anthracis both on microbiological and genetic levels. Real-time PCR targeting plasmidal and chromosomal markers should be used for rapid and definitive exclusion of a virulent strain of B. anthracis in such samples.
Significance and Impact of the Study:  This study gives an overview of the current microbiological and molecular methods used for identification of B. anthracis and shows that most assays have limits when borderline isolates present in environmental samples are analysed.     

Identification and characterization of Bacillus anthracis by multiplex PCR on DNA chip

Bacillus anthracis can be identified by detecting virulence factor genes located on two plasmids, pXO1 and pXO2. Combining multiplex PCR with arrayed anchored primer PCR and biotin-avidin alkaline phosphatase indicator system, we developed a qualitative DNA chip method for characterization of B. anthracis, and simultaneous confirmation of the species identity independent of plasmid contents. The assay amplifies pag gene (in pXO1), cap gene (in pXO2) and Ba813 gene (a B. anthracis specific chromosomal marker), and the results were indicated by an easy-to-read profile based on the color reaction of alkaline phosphatase. About 1 pg of specific DNA fragments on the chip wells could be detected after PCR. With the proposed method, the avirulent (pXO1+/2-, pXO1-/2+ and pXO1-/2-) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria were unambiguously identified, while the genera other than Bacillus gave no positive signal.     

A Bacillus thuringiensis strain producing a polyglutamate capsule resembling that of Bacillus anthracis

Bacillus thuringiensis serovar Monterrey strain BGSC 4AJ1 produced a microscopically visible capsule that reacted with a fluorescent antibody specific for the poly-gamma-d-glutamic acid (PGA) capsule of Bacillus anthracis. PGA capsule biosynthesis genes with 75%, 81%, 72%, 65% and 63% similarity, respectively, to those of the B. anthracis capBCADE cluster were present on a plasmid (pAJ1-1). Strain BGSC 4AJ1, together with five strains of Bacillus cereus that hybridized to a PGA cap gene probe, were analyzed phylogenetically using six housekeeping genes of a B. cereus multilocus sequence typing scheme. Bacillus thuringiensis BGSC 4AJ1 shared four identical alleles with B. anthracis and was the second most closely related to this bacterium of the 674 isolates in the multilocus sequence typing database. The other cap+ strains were distributed among various lineages of Clade 1 of the B. cereus group.     

制备炭疽芽胞杆菌检测基因芯片的初步研究

建立制备炭疽芽胞杆菌检测基因芯片的技术,并探讨研制检测炭疽芽胞杆菌基因芯片的方法。酶切炭疽芽胞杆菌的毒素质粒和荚膜质粒,通过建立质粒DNA文库的方法获取探针,并打印在经过氨基化修饰的玻片上,制成用于炭疽芽胞杆菌检测的基因芯片。收集了290个阳性克隆探针,制备了检测炭疽芽胞杆菌的基因芯片。提取炭疽芽胞杆菌质粒DNA与基因芯片杂交,经ScanArray Lite芯片阅读仪扫描得到初步的杂交荧光图像。通过分析探针的杂交信号初步筛选出273个基因片段作为芯片下一步研究的探针。     

炭疽芽胞杆菌基因芯片探针文库的构建

为制备炭疽芽胞杆菌的基因芯片探针文库,以炭疽芽胞杆菌毒素质粒pX01和荚膜质粒pX02为原材料,用Sau3A I酶切pX01和pX02质粒DNA,Taq DNA聚合酶72℃补平加A,经AT克隆,PCR初步鉴定筛选出炭疽质粒片段的阳性克隆．DNA自动分析仪对克隆片段进行序列测定;用生物信息学方法对其片段进行同源性分析;并将克隆的探针打印于玻片上,制备成炭疽芽胞杆茵基因芯片,与炭疽杆茵质粒DNA样品进行初步芯片杂交的实验,杂交实验的阳性率达到了90％以上,证明大部分克隆探针属于炭疽芽胞杆菌．炭疽芽胞杆菌基因芯片探针文库的构建为基因芯片探针的制备摸索出一条简便、高效、可行的方法．     

Application of the multiplex PCR and PCR-RFLP method in the identification of the Bacillus anthracis

The aim of this study was to apply the multiplex PCR and PCR-RFLP method for the identification of the B. anthracis strains and to distinguish those bacteria from other members of the Bacillus cereus group. The multiplex PCR method enables to detect the virulence factors, i.e. the toxin and the capsule in B. anthracis strains. To do that, the authors have used 5 primer pairs specific for the fragments of lef, cya, pag genes which are present in the pXO1 plasmid and encode the toxin, the cap gene, which is present in the pXO2 plasmid and encodes the capsule, and the Ba813 chromosomal sequence. Among the four B. anthracis strains examined, three contained two plasmids and the Ba813 chromosomal sequence, while the fourth one contained the pXO1 plasmid only, together and the Ba813 chromosomal sequence. Other bacterial species, belonging to the B. cereus group, were also examined: 6 strains of B. cereus, 4 strains of B. thuringiensis and one strain of B. mycoides. The presence of Ba813 chromosomal sequence has been detected in two B. cereus strains. Neither plasmids nor Ba813 chromosomal sequence have been discovered in other B. cereus, B. thuringiensis and B. mycoides strains. The results of the survey indicate that the Ba813 chromosomal sequence does not occur solely in B. anthracis strains. The PCR-RFLP method with the use of SG-749f and SG-749r primers enabled to demonstrate the presence of DNA sequence (SG-749) in B. anthracis, B. cereus, B. thuringiensis and B. mycoides strains. Restriction analysis with enzyme AluI of the SG-749 sequence, has shown the presence of two DNA fragments at the size of about 90 and 660 bp in all B. anthracis strains. The restriction profile obtained was characteristic for B. anthracis strains and it did not occur in other investigated bacterial species belonging to the B. cereus group. It was not observed even in such B. cereus strains in which the presence of Ba813 sequence was discovered and it enabled to differentiate between B. anthracis strains and other closely related species of the B. cereus group.     

Discrimination of Bacillus anthracis and closely related microorganisms by analysis of 16S and 23S rRNA with oligonucleotide microarray

Analysis of 16S rRNA sequences is a commonly used method for the identification and discrimination of microorganisms. However, the high similarity of 16S and 23S rRNA sequences of Bacillus cereus group organisms (up to 99-100%) and repeatedly failed attempts to develop molecular typing systems that would use DNA sequences to discriminate between species within this group have resulted in several suggestions to consider B. cereus and B. thuringiensis, or these two species together with B. anthracis, as one species. Recently, we divided the B. cereus group into seven subgroups, Anthracis, Cereus A and B, Thuringiensis A and B, and Mycoides A and B, based on 16S rRNA, 23S rRNA and gyrB gene sequences and identified subgroup-specific makers in each of these three genes. Here we for the first time demonstrated discrimination of these seven subgroups, including subgroup Anthracis, with a 3D gel element microarray of oligonucleotide probes targeting 16S and 23S rRNA markers. This is the first microarray enabled identification of B. anthracis and discrimination of these seven subgroups in pure cell cultures and in environmental samples using rRNA sequences. The microarray bearing perfect match/mismatch (p/mm) probe pairs was specific enough to discriminate single nucleotide polymorphisms (SNPs) and was able to identify targeted organisms in 5min. We also demonstrated the ability of the microarray to determine subgroup affiliations for B. cereus group isolates without rRNA sequencing. Correlation of these seven subgroups with groupings based on multilocus sequence typing (MLST), fluorescent amplified fragment length polymorphism analysis (AFLP) and multilocus enzyme electrophoresis (MME) analysis of a wide spectrum of different genes, and the demonstration of subgroup-specific differences in toxin profiles, psychrotolerance, and the ability to harbor some plasmids, suggest that these seven subgroups are not based solely on neutral genomic polymorphisms, but instead reflect differences in both the genotypes and phenotypes of the B. cereus group organisms.     

Comparative analysis of 23S ribosomal RNA gene sequences of Bacillus anthracis and emetic Bacillus cereus determined by PCR-direct sequencing

The primary structures of the 23S ribosomal RNA genes of Bacillus anthracis and an emetic strain of Bacillus cereus were determined by direct sequencing of enzymatically amplified chromosomal DNA. The 23S rRNA gene sequences of B. anthracis and B. cereus were found to be almost identical and showed only two differences (a single nucleotide change, and a single base insertion in B. cereus). The feasibility of using PCR-direct sequencing for the rapid sequence determination of large-subunit rRNA genes is demonstrated.     

Molecular cloning and expression of the Bacillus anthracis edema factor toxin gene: a calmodulin-dependent adenylate cyclase.

The Bacillus anthracis exotoxin is composed of a lethal factor, a protective antigen, and an edema factor (EF). EF is a calmodulin-dependent adenylate cyclase which elevates cyclic AMP levels within cells. The entire EF gene (cya) has been cloned in Escherichia coli, but EF gene expression by its own B. anthracis promoter could not be detected in E. coli. However, when the EF gene was placed downstream from the lac or the T7 promoter, enzymatically active EF was produced. The EF gene, like the protective antigen (pag) and lethal factor (lef) genes, was present on the large B. anthracis toxin plasmid pXO1.     

Siderophores of Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis

Three Bacillus anthracis Sterne strains (USAMRIID, 7702, and 34F2) and Bacillus cereus ATCC 14579 excrete two catecholate siderophores, petrobactin (which contains 3,4-dihydroxybenzoyl moieties) and bacillibactin (which contains 2,3-dihydroxybenzoyl moieties). However, the insecticidal organism Bacillus thuringiensis ATCC 33679 makes only bacillibactin. Analyses of siderophore production by previously isolated [Cendrowski et al., Mol. Microbiol. 52 (2004) 407-417] B. anthracis mutant strains revealed that the B. anthracis bacACEBF operon codes for bacillibactin production and the asbAB gene region is required for petrobactin assembly. The two catecholate moieties also were synthesized by separate routes. PCR amplification identified both asbA and asbB genes in the petrobactin producing strains whereas B. thuringiensis ATCC 33679 retained only asbA. Petrobactin synthesis is not limited to the cluster of B. anthracis strains within the B. cereus sensu lato group (in which B. cereus, B. anthracis, and B. thuringiensis are classified), although petrobactin might be prevalent in strains with pathogenic potential for vertebrates.     

Comparison of PCR, culture and microscopy of blood smears for the diagnosis of anthrax in sheep and cattle

AIMS: To compare microscopy, culture and PCR for the diagnosis of anthrax in blood samples from sheep and cattle. METHODS AND RESULTS: Blood samples were stored at room temperature and at 37 degrees C after receipt, over a period of 15-17 days. Aliquots were plated onto blood agar and blood smears were prepared. Following microscopic examination, DNA was extracted from blood smears and subjected to a multiplex PCR assay targeting the Ba813, cap and lef markers. CONCLUSIONS: PCR provided the most reliable means for the detection of Bacillus anthracis in deteriorating blood samples (15-17 days) and was also successful in diagnosing anthrax in blood smears that had been stored for 6 years and a blood sample which had been stored for 18 months at -20 degrees C. While less successful than PCR, culture for B. anthracis on 7% sheep blood agar was typically more reliable (2-17 days) than the examination of blood smears (2-6 days) for encapsulated bacilli. SIGNIFICANCE AND IMPACT OF THE STUDY: This work demonstrated the superiority of PCR for the diagnosis of anthrax from blood smear scrapings, particularly when microscopy is unreliable.     

Microarray analysis of Bacillus cereus group virulence factors

Bacillus cereus, B. thuringiensis and B. anthracis are closely related medically and economically important bacterial species that belong to the B. cereus group. Members of the B. cereus group carry genes encoding several important virulence factors, including enterotoxins, phospholipases and exotoxins. Since it is difficult to differentiate among B. cereus group members, and because Bacillus virulence factors are very important for pathogenesis, we explored the use of microarray-based detection of virulence factor genes as a tool for strain identification and for determining virulence. Our method requires an initial multiplex PCR amplification step, followed by identification of the PCR amplicons by hybridization to an oligonucleotide microarray containing genes for all three types of Bacillus virulence factors including B. anthracis virulence factors. The DNA chip described here contains 21 identical arrays used for analysis of seven samples in triplicates. Using the arrays, we found that virulence factors are present in several combinations in the strains analyzed. This work also demonstrates the potential of oligonucleotide microarrays for medical, food safety and biodefense analysis of microbial pathogens.     

Strategy for identification of Bacillus cereus and Bacillus thuringiensis strains closely related to Bacillus anthracis

Bacillus cereus strains that are genetically closely related to B. anthracis can display anthrax-like virulence traits (A. R. Hoffmaster et al., Proc. Natl. Acad. Sci. USA 101:8449-8454, 2004). Hence, approaches that rapidly identify these "near neighbors" are of great interest for the study of B. anthracis virulence mechanisms, as well as to prevent the use of such strains for B. anthracis-based bioweapon development. Here, a strategy is proposed for the identification of near neighbors of B. anthracis based on single nucleotide polymorphisms (SNP) in the 16S-23S rRNA intergenic spacer (ITS) containing tRNA genes, characteristic of B. anthracis. By using restriction site insertion-PCR (RSI-PCR) the presence of two SNP typical of B. anthracis was screened in 126 B. cereus group strains of different origin. Two B. cereus strains and one B. thuringiensis strain showed RSI-PCR profiles identical to that of B. anthracis. The sequencing of the entire ITS containing tRNA genes revealed two of the strains to be identical to B. anthracis. The strict relationship with B. anthracis was confirmed by multilocus sequence typing (MLST) of four other independent loci: cerA, plcR, AC-390, and SG-749. The relationship to B. anthracis of the three strains described by MLST was comparable and even higher to that of four B. cereus strains associated with periodontitis in humans and previously reported as the closest known strains to B. anthracis. SNP in ITS containing tRNA genes combined with RSI-PCR provide a very efficient tool for the identification of strains closely related to B. anthracis.     

Rapid genotypic detection of Bacillus anthracis and the Bacillus cereus group by multiplex real-time PCR melting curve analysis

Bacillus anthracis has four plasmid possible virulence genotypes: pXO1+/pXO2+, pXO1+/pXO2-, pXO1-/pXO2+ or pXO1-/pXO2-. Due to the lack of a specific chromosomal marker for B. anthracis, differentiation of the pXO1-/pXO2- form of B. anthracis from closely related Bacillus cereus group species is difficult. In this study, we evaluate the ability of sspE, pXO1 and pXO2 primers to discriminate individual B. anthracis and the B. cereus group genotypes using multiplex real-time PCR and melting curve analysis. Optimal conditions for successful multiplex assays have been established. Purified DNAs from 38 bacterial strains including 11 strains of B. anthracis and 18 B. cereus group strains were analyzed. Nine of the B. cereus group near-neighbor strains were shown by multilocus sequence typing to be phylogenetically proximate to the B. anthracis clade. We have demonstrated that the four plasmid genotypes of B. anthracis and B. cereus group near-neighbors were differentially and simultaneously discriminated by this assay.     

Evaluation of the Cepheid GeneXpert system for detecting Bacillus anthracis

AIMS: The Cepheid GeneXpert is a four-site, automated sample preparation and real-time PCR detection system. In this study, the capability of the GeneXpert to isolate and detect nucleic acid from Bacillus anthracis Ames spores was assessed. METHODS AND RESULTS: A four-plex, dried-down bead cartridge containing PCR reagents specific for the pXO1 and pXO2 plasmids as well as sample processing and inhibition controls was evaluated. For B. anthracis Ames spores harbouring pXO1 and pXO2, samples containing 68 CFU per ml (148 spores per ml) were positive in all four replicates. A limited cross-reactivity panel, which included closely related Bacillus species, was also tested to determine the specificity of the pXO1 and pXO2 assays. No cross-reactivity occurred. Further, B. anthracis Sterne spore samples were analysed to compare results when processed using the GeneXpert to those run directly on the Cepheid SmartCycler without sample processing. The GeneXpert detection capability was three logs lower than the SmartCycler indicating the benefit of incorporating a nucleic acid extraction procedure. CONCLUSIONS: This study demonstrates that the GeneXpert is a rapid and reliable system for simultaneously detecting the B. anthracis virulence plasmids pXO1 and pXO2. SIGNIFICANCE AND IMPACT OF THE STUDY: The GeneXpert is the only platform currently available that is capable of both nucleic acid purification and real-time PCR detection enclosed within a single system. Further, all sample manipulations are automated, thus reducing errors associated with manual processing.     

Oligonucleotide microarray identification of Bacillus anthracis strains using support vector machines

The capability of a custom microarray to discriminate between closely related DNA samples is demonstrated using a set of Bacillus anthracis strains. The microarray was developed as a universal fingerprint device consisting of 390 genome-independent 9mer probes. The genomes of B. anthracis strains are monomorphic and therefore, typically difficult to distinguish using conventional molecular biology tools or microarray data clustering techniques. Using support vector machines (SVMs) as a supervised learning technique, we show that a low-density fingerprint microarray contains enough information to discriminate between B. anthracis strains with 90% sensitivity using a reference library constructed from six replicate arrays and three replicates for new isolates.