The use of a selectable FokI cassette in DNA replacement mutagenesis of the R388 dihydrofolate reductase gene

FokI, a class-IIS restriction endonuclease, cleaves double-stranded DNA to produce a protruding 5' end consisting of four nucleotides, 10-13 residues 3' from the nonpalindromic recognition sequence, GGATG. Cassettes which utilize this separation of cleavage and recognition site have been constructed for the purpose of linker mutagenesis and DNA replacement experiments. The cassettes are flanked by FokI recognition sequences oriented such that the FokI cleavage sites are several nucleotides beyond the cassette/vector fusion sites. FokI excises the cassette and several base pairs of the neighboring vector sequence. The ends produced in the vector by FokI cleavage are generally noncomplementary and suitable for the insertion of a segment of synthesized double-stranded replacement DNA. A cassette which contains a tyrosine tRNA suppressor gene (supF) is selectable by the suppression of amber mutations in the recipient host. A vector containing a pBR322-derived origin of replication, the Escherichia coli xanthine-guanine phosphoribosyl transferase gene as a selectable marker, and no FokI sites has been constructed for use with the FokI cassettes. An experiment which utilized the FokI/supF cassette to modify the N-terminal coding region of the R388 dihydrofolate reductase gene is described.     

Ksp632I, a novel class-IIS restriction endonuclease from Kluyvera sp. strain 632 with the asymmetric hexanucleotide recognition sequence: 5'-CTCTTC(N)1-3' 3'-GAGAAG(N)4-5'

A new class-IIS restriction endonuclease, Ksp632I, with novel sequence specificity has been discovered in a non-pathogenic species of Kluyvera. The presence of only a single site-specific activity in this Kluyvera sp. strain 632 enables Ksp632I to be isolated in highly purified form free of contaminating nucleases. Ksp632I recognition sites and cleavage positions were deduced using experimental and computer-assisted mapping and sequencing. The cleavage specificity corresponds to the sequence 5'-CTCTTCN decreases NNN-N-3' 3'-GAGAAGN-NNN increases N-5'. The enzyme recognizes an asymmetric hexanucleotide sequence and cleaves in the presence of Mg2+ ions specific phosphodiester bonds in both DNA strands, 1 and 4 nucleotides distal to the recognition sequence. The staggered cuts generate 5'-protruding ends with single-stranded 5'-phosphorylated trinucleotides. Several slow cleavage sites for Ksp632I were observed on lambda cI857Sam7 DNA. Ksp632I may complement other class-IIS enzymes in the universal restriction approach and may serve as a tool for generating defined unidirectional deletions or insertions.     

Formation of MboII vectors and cassettes using asymmetric MboII linkers

Class-IIS restriction endonucleases such as MboII cleave DNA at a specified distance away from their recognition sequences. This feature was exploited to cleave DNA at previously inaccessible locations by preparing special asymmetric linker/adapters containing the MboII recognition sequence. These could be joined to DNA fragments and subsequently cleaved by MboII. Attachment of a 3' phosphate to one of the two different oligodeoxynucleotides comprising the asymmetric duplex prevented ligation at the improper end of the linker. Plasmids were constructed containing a unique BamHI or BclI site between the recognition and cleavage site of MboII. These sites were used to introduce a foreign fragment into the plasmid at a position permitting MboII to cleave within the newly inserted fragment. Once cleaved at the unique MboII site, another DNA fragment was inserted. DNA was thus inserted at a sequence not previously accessible to specific cleavage by a restriction enzyme. A cassette containing an identifiable marker, the lac operator, between two oppositely oriented MboII/BamHI linkers was made and tested in a random insertion linker mutagenesis experiment.     

A novel multistep method for generating precise unidirectional deletions using BspMI, a class-IIS restriction enzyme

A novel approach is described that permits the introduction of unidirectional deletions into a cloned DNA fragment, in a precisely controlled manner. The method is based on the use of a special vector and a class-IIS restriction endonuclease, BspMI, which produces staggered cuts 4 and 8 nucleotides (nt) to the 3' from its recognition site 5'-ACCTGC-3'. The DNA fragment is inserted into the pUC19-based plasmid, which contains a unique BspMI recognition site, and the appropriate number of cleavage-and-deletion cycles is performed, each cycle removing 4 bp. Since the recognition site is not affected by the BspMI cleavage, no recloning of the DNA fragment is necessary. Each cycle consists of BspMI cleavage, removal of the 4-nt single-stranded cohesive ends with mung bean nuclease (MB), and blunt-end ligation to recircularize the plasmid. The shortened plasmid is reintroduced into the host, after one or after several such 4-bp deletion cycles. When DNA is inserted into the multiple cloning site in the lacZ alpha gene, the progress of 4-bp removal can be followed by determining the Lac phenotype, since removal of multiples of 3 bp retains the reading frame while other kinds of deletions distort (or restore) the reading frame. Loss of pre-existing restriction sites or creation of new ones also permits monitoring the progress of the deletion process.(ABSTRACT TRUNCATED AT 250 WORDS)     

重组单链抗体-低分子质量尿激酶融合蛋白在 CHO 细胞中的抗降解研究

抗人纤维蛋白单链抗体-低分子质量尿激酶(Ⅱn-UK)融合蛋白,兼有单链抗体对纤维蛋白的亲和性和尿激酶的溶栓活性,有望开发成为新型导向溶栓药物.但基于通用连接肽(G4S)3的Ⅱn-linker-UK融合蛋白在CHO细胞中表达时出现明显的降解.为了解决此问题,利用分子生物学方法,对Hn-UK融合蛋白进行了分子改造,包括置换连接肽,改变两个半分子(moiety)的相对位置,以及对连接肽附近明确的蛋白酶位点进行突变等方法,并分别研究了改造后的11种Ⅱn-1inker-UK或UK-linker-Ⅱn突变体在CHO细胞中分泌性表达时的稳定性,最终筛选到一种抗降解的突变体.     

Recognition sequence of restriction endonuclease KpnI from Klebsiella pneumoniae.

We have determined the recognition sequence of the restriction endonuclease KpnI, previously isolated from Klebsiella pneumoniae. The enzyme cleaves the twofold rotationally symmetric sequence (see book for formula) at the positions indicated by the arrows, producing 3' protruding cohesive ends, four nucleotides in length. The specific cleavage site was unambiguously deduced using both 3' and 5' end analyses of KpnI generated restriction fragments of simian-virus 40 (SV40) DNA (1 site), adenovirus-2 (Ad-2) DNA (8 sites), and a plasmid (pCRI) DNA (2 sites).     

DNA cleavage by type III restriction-modification enzyme EcoP15I is independent of spacer distance between two head to head oriented recognition sites

The type III restriction-modification enzyme EcoP15I requires the interaction of two unmethylated, inversely oriented recognition sites 5'-CAGCAG in head to head configuration to allow an efficient DNA cleavage. It has been hypothesized that two convergent DNA-translocating enzyme-substrate complexes interact to form the active cleavage complex and that translocation is driven by ATP hydrolysis. Using a half-automated, fluorescence-based detection method, we investigated how the distance between two inversely oriented recognition sites affects DNA cleavage efficiency. We determined that EcoP15I cleaves DNA efficiently even for two adjacent head to head or tail to tail oriented target sites. Hence, DNA translocation appears not to be required for initiating DNA cleavage in these cases. Furthermore, we report here that EcoP15I is able to cleave single-site substrates. When we analyzed the interaction of EcoP15I with DNA substrates containing adjacent target sites in the presence of non-hydrolyzable ATP analogues, we found that cleavage depended on the hydrolysis of ATP. Moreover, we show that cleavage occurs at only one of the two possible cleavage positions of an interacting pair of target sequences. When EcoP15I bound to a DNA substrate containing one recognition site in the absence of ATP, we observed a 36 nucleotide DNaseI-footprint that is asymmetric on both strands. All of our footprinting experiments showed that the enzyme did not cover the region around the cleavage site. Analyzing a DNA fragment with two head to head oriented recognition sites, EcoP15I protected 27-33 nucleotides around the recognition sequence, including an additional region of 26 bp between both cleavage sites. For all DNA substrates examined, the presence of ATP caused altered footprinting patterns. We assume that the altered patterns are most likely due to a conformational change of the enzyme. Overall, our data further refine the tracking-collision model for type III restriction enzymes.     

Unidirectional translocation from recognition site and a necessary interaction with DNA end for cleavage by Type III restriction enzyme

Type III restriction enzymes have been demonstrated to require two unmethylated asymmetric recognition sites oriented head-to-head to elicit double-strand break 25–27 bp downstream of one of the two sites. The proposed DNA cleavage mechanism involves ATP-dependent DNA translocation. The sequence context of the recognition site was suggested to influence the site of DNA cleavage by the enzyme. In this investigation, we demonstrate that the cleavage site of the R.EcoP15I restriction enzyme does not depend on the sequence context of the recognition site. Strikingly, this study demonstrates that the enzyme can cleave linear DNA having either recognition sites in the same orientation or a single recognition site. Cleavage occurs predominantly at a site proximal to the DNA end in the case of multiple site substrates. Such cleavage can be abolished by the binding of Lac repressor downstream (3′ side) but not upstream (5′ side) of the recognition site. Binding of HU protein has also been observed to interfere with R.EcoP15I cleavage activity. In accordance with a mechanism requiring two enzyme molecules cooperating to elicit double-strand break on DNA, our results convincingly demonstrate that the enzyme translocates on DNA in a 5′ to 3′ direction from its recognition site and indicate a switch in the direction of enzyme motion at the DNA ends. This study demonstrates a new facet in the mode of action of these restriction enzymes.     

Psoralen photo-cross-linking by triplex-forming oligonucleotides at multiple sites in the human rhodopsin gene.

Targeting DNA damage by triplex-forming oligonucleotides (TFOs) represents a way of modifying gene expression and structure and a possible approach to gene therapy. We have determined that this approach can deliver damage with great specificity to sites in the human gene for the G-protein-linked receptor rhodopsin, mutations of which can lead to the genetic disorder autosomal dominant retinitis pigmentosa. We have introduced DNA monoadducts and interstrand cross-links at multiple target sites within the gene using TFOs with a photoactivatable psoralen group at the 5'-end. The extent of formation of photoadducts (i.e., monoadducts and cross-links) was measured at target sites with a 5'-ApT sequence at the triplex-duplex junction and at a target site with 5'-ApT and 5'-TpA sequences located four and seven nucleotides away, respectively. To improve psoralen reactivity at more distant sites, psoralen moieties were attached to TFOs with nucleotide "linkers" from two to nine nucleotides in length. High-affinity binding was maintained with linkers of up to 10 nucleotides, but affinities tended to decrease somewhat with increasing linker length due to faster dissociation kinetics. DNase I footprinting indicated little, if any, interaction between linkers and the duplex. Psoralen-TFO conjugates formed DNA cross-links with high efficiency (56-65%) at 5'-ApT sequences located at triplex junctions. At a 5'-ApT site four nucleotides away, the efficiency varied with linker length; a four-nucleotide linker gave the highest efficiency. Duplexes with 5'-TpA and 5'-ApT sites two nucleotides away, in otherwise identical sequences, were cross-linked with efficiencies of 56 and 38%, respectively. These results indicate that TFO-linker-psoralen conjugates allow simultaneous, efficient targeting of multiple sites in the human rhodopsin gene.     

Substrate specificity of the DNA unwinding activity of the RecBC enzyme of Escherichia coli

The RecBC enzyme of Escherichia coli promotes genetic recombination of phage or bacterial chromosomes. The purified enzyme travels through duplex DNA, unwinding and rewinding the DNA with the transient production of potentially recombinogenic single-stranded DNA. The studies reported here are aimed at understanding which chromosomal forms allow the entry of RecBC enzyme and hence may undergo RecBC enzyme-mediated recombination. Circular duplex molecules, whether covalently closed, nicked or containing single-stranded gaps of 10 to 774 nucleotides, are not detectably unwound by RecBC enzyme. Linear duplex molecules are readily unwound if they have a nearly flush-ended terminus whose 5' and 3' ends are offset by no more than about 25 nucleotides; molecules with longer single-stranded tails are poorly bound by RecBC enzyme and are infrequently unwound. The single-strand endonuclease activity of RecBC enzyme can slowly cleave gapped circles to produce molecules presumably capable of being unwound. These results provide an enzymatic basis for the recombinogenicity of double-stranded DNA ends established from genetic studies of RecBC enzyme and Chi sites, recognition sites for RecBC enzyme-mediated DNA strand cleavage.     

Repair of single nucleotide DNA mismatches transfected into mammalian cells can occur by short-patch excision

Synthetic DNA linkers containing a single mismatched nucleotide (C:A) are repaired without bias at high efficiency when introduced into mammalian cells on a SV40 shuttle vector. From the pattern of repair in vectors containing multiple linkers, it appears that DNA synthesis following mismatch excision can replace a length of DNA as short as 40 nucleotides. Furthermore, results from the introduction of linker molecules containing combinations of single-strand nicks suggest that transient unsealed nicks do not drive the direction of mismatch repair in mammalian cells, as has previously been proposed.     

A new method for constructing linker scanning mutants.

A new procedure for the construction of linker scanning mutants is described. A plasmid containing the target DNA is randomly linearized and slightly shortened by a novel combination of established methods. After partial apurination with formic acid a specific nick or small gap is introduced at the apurinic site by exonuclease III, followed by nuclease S1 cleavage of the strand opposite the nick/gap. Synthetic linkers are ligated to the ends and plasmids having the linker inserted in the target DNA are enriched. Putative linker scanning mutants are identified by their topoisomer patterns after relaxation with topoisomerase I. This technique allows the distinction of plasmids differing in length by a single basepair. We have used this rapid and efficient strategy to generate a set of 32 linker scanning mutants covering the chicken lysozyme promoter from -208 to +15.     

Stimulation of homologous recombination through targeted cleavage by chimeric nucleases

Chimeric nucleases that are hybrids between a nonspecific DNA cleavage domain and a zinc finger DNA recognition domain were tested for their ability to find and cleave their target sites in living cells. Both engineered DNA substrates and the nucleases were injected into Xenopus laevis oocyte nuclei, in which DNA cleavage and subsequent homologous recombination were observed. Specific cleavage required two inverted copies of the zinc finger recognition site in close proximity, reflecting the need for dimerization of the cleavage domain. Cleaved DNA molecules were activated for homologous recombination; in optimum conditions, essentially 100% of the substrate recombined, even though the DNA was assembled into chromatin. The original nuclease has an 18-amino-acid linker between the zinc finger and cleavage domains, and this enzyme cleaved in oocytes at paired sites separated by spacers in the range of 6 to 18 bp, with a rather sharp optimum at 8 bp. By shortening the linker, we found that the range of effective site separations could be narrowed significantly. With no intentional linker between the binding and cleavage domains, only binding sites exactly 6 bp apart supported efficient cleavage in oocytes. We also showed that two chimeric enzymes with different binding specificities could collaborate to stimulate recombination when their individual sites were appropriately placed. Because the recognition specificity of zinc fingers can be altered experimentally, this approach holds great promise for inducing targeted recombination in a variety of organisms.     

Recognition sites of eukaryotic DNA topoisomerase I: DNA nucleotide sequencing analysis of topo I cleavage sites on SV40 DNA.

Eukaryotic DNA topoisomerase I introduces transient single-stranded breaks on double-stranded DNA and spontaneously breaks down single-stranded DNA. The cleavage sites on both single and double-stranded SV40 DNA have been determined by DNA sequencing. Consistent with other reports, the eukaryotic enzymes, in contrast to prokaryotic type I topoisomerases, links to the 3'-end of the cleaved DNA and generates a free 5'-hydroxyl end on the other half of the broken DNA strand. Both human and calf enzymes cleave SV40 DNA at the identical and specific sites. From 827 nucleotides sequenced, 68 cleavage sites were mapped. The majority of the cleavage sites were present on both double and single-stranded DNA at exactly the same nucleotide positions, suggesting that the DNA sequence is essential for enzyme recognition. By analyzing all the cleavage sequences, certain nucleotides are found to be less favored at the cleavage sites. There is a high probability to exclude G from positions -4, -2, -1 and +1, T from position -3, and A from position -1. These five positions (-4 to +1 oriented in the 5' to 3' direction) around the cleavage sites must interact intimately with topo I and thus are essential for enzyme recognition. One topo I cleavage site which shows atypical cleavage sequence maps in the middle of a palindromic sequence near the origin of SV40 DNA replication. It occurs only on single-stranded SV40 DNA, suggesting that the DNA hairpin can alter the cleavage specificity. The strongest cleavage site maps near the origin of SV40 DNA replication at nucleotide 31-32 and has a pentanucleotide sequence of 5'-TGACT-3'.     

An efficient method for generation and subcloning of tandemly repeated DNA sequences with defined length, orientation and spacing.

Tandemly repeated DNA sequences generated from single synthetic oligonucleotide monomers are useful for many purposes. With conventional ligation procedures low yields and random orientation of oligomers makes cloning of defined repeated sequences difficult. We solved these problems using 2 bp overhangs to direct orientation and random incorporation of linkers containing restriction sites during ligation. Ligation products are amplified by PCR using the linker oligonucleotides as primers. Restriction digestion of the PCR products generate multimer distributions whose length is controlled by the monomer/linker ratio. The concatenated DNA fragments of defined length, orientation and spacing can be directly used for subcloning or other applications without further treatment.     

Specificity of restriction endonucleases and methylases--a review

The properties and sources of all known restriction endonucleases and methylases are listed. The enzymes are cross-indexed (Table I), classified according to their recognition sequence homologies (Table II), and characterized within Table II by the cleavage and methylation positions, the number of recognition sites on the double-stranded DNA of the bacteriophages lambda, phi X174 and M13mp7, the viruses Ad2 and SV40, the plasmids pBR322 and pBR328, and the microorganisms from which they originate. Other tabulated properties of the restriction endonucleases include relaxed specificities (integrated into Table II), the structure of the generated fragment ends (Table III), and the sensitivity to different kinds of DNA methylation (Table V). In Table IV the conversion of two- and four-base 5'-protruding ends into new recognition sequences is compiled which is obtained by the fill-in reaction with Klenow fragment of the Escherichia coli DNA polymerase I or additional nuclease S1 treatment followed by ligation of the modified fragment termini [P3]. Interconversion of restriction sites generates novel cloning sites without the need of linkers. This should improve the flexibility of genetic engineering experiments. Table VI classifies the restriction methylases according to the nature of the methylated base(s) within their recognition sequences. This table also comprises restriction endonucleases which are known to be inhibited or activated by the modified nucleotides. The detailed sequences of those overlapping restriction sites are also included which become resistant to cleavage after the sequential action of corresponding restriction methylases and endonucleases [N11, M21]. By this approach large DNA fragments can be generated which is helpful in the construction of genomic libraries. The data given in both Tables IV and VI allow the design of novel sequence specificities. These procedures complement the creation of universal cleavage specificities applying class IIS enzymes and bivalent DNA adapter molecules [P17, S82].     

Structural analysis of the heterodimeric type IIS restriction endonuclease R.BspD6I acting as a complex between a monomeric site-specific nickase and a catalytic subunit

The heterodimeric restriction endonuclease R.BspD6I from Bacillus species D6 recognizes a pseudosymmetric sequence and cuts both DNA strands outside the recognition sequence. The large subunit, Nt.BspD6I, acts as a type IIS site-specific monomeric nicking endonuclease. The isolated small subunit, ss.BspD6I, does not bind DNA and is not catalytically active. We solved the crystal structures of Nt.BspD6I and ss.BspD6I at high resolution. Nt.BspD6I consists of three domains, two of which exhibit structural similarity to the recognition and cleavage domains of FokI. ss.BspD6I has a fold similar to that of the cleavage domain of Nt.BspD6I, each containing a PD-(D/E)XK motif and a histidine as an additional putative catalytic residue. In contrast to the DNA-bound FokI structure, in which the cleavage domain is rotated away from the DNA, the crystal structure of Nt.BspD6I shows the recognition and cleavage domains in favorable orientations for interactions with DNA. Docking models of complexes of Nt.BspD6I and R.BspD6I with cognate DNA were constructed on the basis of structural similarity to individual domains of FokI, R.BpuJI and HindIII. A three-helix bundle forming an interdomain linker in Nt.BspD6I acts as a rigid spacer adjusting the orientations of the spatially separated domains to match the distance between the recognition and cleavage sites accurately.     

Activation of restriction endonuclease EcoRII does not depend on the cleavage of stimulator DNA.

The restriction endonuclease EcoRII is unable to cleave DNA molecules when recognition sites are very far apart. The enzyme, however can be activated in the presence of DNA molecules with a high frequency of EcoRII sites or by oligonucleotides containing recognition sites: Addition of the activator molecules stimulates cleavage of the refractory substrate. We now show that endonucleolysis of the stimulator molecules is not a necessary prerequisite of enzyme activation. A total EcoRII digest of pBR322 DNA or oligonucleotide duplexes with simulated EcoRII ends (containing the 5' phosphate group), as well as oligonucleotide duplexes containing modified bases within the EcoRII site, making them resistant to cleavage, are all capable of enzyme activation. For activation EcoRII requires the interaction with at least two recognition sites. The two sites may be on the same DNA molecule, on different oligonucleotide duplexes, or on one DNA molecule and one oligonucleotide duplex. The efficiency of functional intramolecular cooperation decreases with increasing distance between the sites. Intermolecular site interaction is inversely related to the size of the stimulator oligonucleotide duplex. The data are in agreement with a model whereby EcoRII simultaneously interacts with two recognition sites in the active complex, but cleavage of the site serving as an allosteric activator is not necessary.     

Sites of reaction of Escherichia coli DNA gyrase on pBR322 in vivo as revealed by oxolinic acid-induced plasmid linearization

pBR322 DNA, linearized by lysis of an oxolinic acid-treated culture of Escherichia coli strain DK6recA- (pBR322) with sodium dodecyl sulfate, was purified, treated with DNA polymerase in the presence of the four deoxynucleoside triphosphates, and ligated to DNA linkers containing the XhoI recognition sequence. Most of the drug-resistant colonies resulting from transformation of E. coli with this material bore plasmids that appeared by restriction enzyme analysis to differ from pBR322 only by the introduction of an XhoI site. The XhoI sites in plasmids from 93 transformants were distributed unevenly around the pBR322 map. Maxam-Gilbert DNA sequence analysis of 36 of these plasmids, labeled at the 5' termini of the XhoI sites, revealed that 29 of them contained, in addition to the XhoI linker, a duplication of four base-pairs of the pBR322 sequence surrounding the linker. Therefore, oxolinic acid-induced linearization must have resulted in 5'-terminal extensions of four bases, the configuration known to result from oxolinic acid-induced DNA cleavage by DNA gyrase in vitro. The sequence data thus allowed the determination of the precise point at which linearization occurred, apparently by the abortion of a gyrase-DNA covalent intermediate that existed in vivo. When the 19 different sites of the 29 plasmids were compared, the following set of rules could be derived: (formula; see text) where N is any nucleotide, R is a purine, and Y is a pyrimidine. Cleavage occurred at the line between the eighth and ninth positions from the left. The parenthetical G and T were preferred secondarily to T and G, respectively, whereas T and G in the 13th position from the left were equally preferred. Several of these rules are similar to those proposed previously based on several in vitro gyrase cleavage sites. Some of our rules show dyad symmetry around the axis midway between the cleavage points in the two strands, while others are distinctly asymmetric.     

Specific hydrolysis of the cohesive ends of bacteriophage lambda DNA by three single strand-specific nucleases.

Procedures have been worked out for Aspergillus nuclease S1 and mung been nuclease to quantitatively cleave off both of the 12-nucleotide long, single-stranded cohesive ends of lambdaDNA. This cleavage is indicated by the almost complete elimination of the repair incorporation of radioactive nucleotides by DNA polymerase into the digested DNA. With S1 nuclease, cleavage was complete at 10 degrees as well as at 30 degrees. Under the conditions for quantitative cleavage of the single-stranded regions there was no digestion of the double-stranded lambdaDNA. The mung bean nuclease cleaved off the cohesive ends completely at 30 degrees but at 5 degrees, the cleavage was not complete even at high enzyme concentration. The nearest neighbor analysis of the repaired DNA indicates that at 5 degrees about four nucleotides remained undigested. The mung bean nuclease also introduced, under the conditions used, some nicks into double-stranded DNA as determined by the repair incorporation. The Escherichia coli exonuclease VII cleaved off part of the cohesive ends of lambdaDNA, leaving two nucleotides on each end as single-stranded tails.