Anaerobic biodegradation of diesel fuel-contaminated wastewater in a fluidized bed reactor

Diesel fuel spills have a major impact on the quality of groundwater. In this work, the performance of an Anaerobic Fluidized Bed Reactor (AFBR) treating synthetic wastewater is experimentally evaluated. The wastewater comprises tap water containing 100, 200 and 300 mg/L of diesel fuel and nutrients. Granular, inert, activated carbon particles are employed to provide support for biomass inside the reactor where diesel fuel is the sole source of carbon for anaerobic microorganisms. For different rates of organic loading, the AFBR performance is evaluated in terms of the removal of diesel fuel as well as chemical oxygen demand (COD) from wastewater. For the aforementioned diesel fuel concentrations and a wastewater flow rate of 1,200 L/day, the COD removal ranges between 61.9 and 84.1%. The concentration of diesel fuel in the effluent is less than 50 mg/L, and meets the Level II groundwater standards of the MUST guidelines of Alberta.     

Lactic acid production by Lactobacillus delbrueckii in a dual reactor system using packed bed biofilm reactor

Aims:  An integrated dual reactor system for continuous production of lactic acid by Lactobacillus delbrueckii using biofilms developed on reticulated polyurethane foam (PUF) is demonstrated.
Methods and Results:  Lactobacillus delbrueckii was immobilized on PUF, packed in a bioreactor and used in lactic acid fermentation. The rate of lactic acid production was significantly high with a volumetric productivity of 5 g l⁻¹ h⁻¹ over extended period of time. When coupled to a bioreactor, the system could be operated as dual reactor for over 1000 h continuously without augmentation of inoculum and no compromise on productivity.
Conclusions:  Polyurethane foams offer an excellent support for biofilm formation.
Significance and Impact of the Study:  The system was very robust and could be operated for prolonged period at a volumetric productivity of 4–6 g l⁻¹ h⁻¹.     

Lipase-mediated acidolysis of butteroil with free conjugated linoleic acid in a packed bed reactor

Acidolysis of butteroil with free conjugated linoleic acid (CLA) was studied in a packed bed reactor containing an immobilized Candida antarctica (fraction B) lipase. Kinetic data were used to develop quantitative reversible rate expressions of the general Michaelis-Menten form that also incorporate a term for first-order deactivation of the enzyme. The extent of incorporation of CLA in the triacylglycerols of butteroil was characterized for reactions carried out at several temperatures (namely 45 degrees, 50 degrees, and 55 degrees C) with different weight ratios of butteroil to CLA (namely 10:1 and 2:1). At the optimum operating temperature of 50 degrees C, similar levels of incorporation of CLA (60% to 85%) were achieved at low space times (<3 h) for both 10:1 and 2:1 (w/w) ratios of butteroil to CLA.     

Aerobic biodegradation of a mixture of sulfonated azo dyes by a bacterial consortium immobilized in a two‐stage sparged packed‐bed biofilm reactor

The biodegradation of the sulfonated azo dyes, Acid Orange 7 (AO7) and Acid Red 88 (AR88), by a bacterial consortium isolated from water and soil samples obtained from sites receiving discharges from textile industries, was evaluated. For a better removal of azo dyes and their biodegradation byproducts, an aerobically operated two‐stage rectangular packed‐bed biofilm reactor (2S‐RPBR) was constructed. Because the consortium's metabolic activity is affected by oxygen, the effect of the interstitial air flow rate Q_GI on 2S‐RPBR's zonal values of the oxygen mass transfer coefficient k_La was estimated. In the operational conditions probed in the bioreactor, the k_La values varied from 3 to 60 h^?1, which roughly correspond to volumetric oxygen transfer rates, dc_L/dt, ranging from 20 to 375 mg O₂ L^?1h^?1. Complete biodegradation of azo dyes was attained at loading rates B_V,AZ up to 40 mg L^?1d^?1. At higher B_V,AZ values (80 mg L^?1 d^?1), dye decolorization and biodegradation of the intermediaries 4‐amino‐naphthalenesulphonic acid (4‐ANS) and 1‐amino‐2‐naphthol (1‐A2N) was almost complete. However, a diminution in COD and TOC removal efficiencies was observed in correspondence to the 4‐aminobenzenesulfonic acid (4‐ABS) accumulation in the bioreactor. Although the oxygen transport rate improved the azo dye mineralization, the results suggest that the removal efficiency of azo dyes was affected by biofilm detachment at relatively high Q_GI and B_V,AZ values. After 225 days of continuous operation of the 2S‐RFBR, eight bacterial strains were isolated from the biofilm attached to the porous support. The identified genera were: Arthrobacter, Variovorax, Agrococcus, Sphingomonas, Sphingopyxis, Methylobacterium, Mesorhizobium, and Microbacterium.     

Investigation of total bacterial and ammonia-oxidizing bacterial community composition in a full-scale aerated submerged biofilm reactor for drinking water pretreatment in China

The community composition of total bacteria and ammonia-oxidizing bacteria in a full-scale aerated submerged biofilm reactor for drinking water pretreatment was characterized by analysis of 16S rRNA gene and the functional gene amoA, respectively. Sampling was performed in February and in July. 16S rRNA gene clone libraries revealed 13 bacterial divisions. At both sampling dates, the majority of clone sequences were related to the Alpha- and Betaproteobacteria. A minor proportion belonged to the following groups: Gammaproteobacteria, Deltaproteobacteria, Nitrospira, Firmicutes, Acidobacteria, Verrucomicrobia, Actinobacteria, Planctomycetes, Chloroflexi, Gemmatimonadetes and the Cytophaga-Flavobacterium-Bacteroides group. Some sequences related to bacteria owning high potential metabolic capacities were detected in both samples, such as Rhodobacter-like rRNA gene sequences. Surveys of cloned amoA genes from the two biofilm samples revealed ammonia-oxidizing bacterial sequences affiliated with the Nitrosomonas oligotropha lineage, Nitrosomonas communis lineage. An unknown Nitrosomonas group of amoA gene sequences was also detected.     

Production of structured triacylglycerols by acidolysis catalyzed by lipases immobilized in a packed bed reactor

The aim of this work was to produce structured triacylglycerols (STAGs), with caprylic acid located at positions 1 and 3 of the glycerol backbone and docosohexaenoic acid (DHA) at position 2, by acidolysis of tuna oil and caprylic acid (CA) catalyzed by lipases Rd, from Rhizopus delemar, and Palatase 20000L from Mucor miehei immobilized on Accurel MP1000 in a packed bed reactor (PBR), working in continuous and recirculation modes. First, different lipase/support ratios were tested for the immobilization of lipases and the best results were obtained with ratios of 0.67 (w/w) for lipase Rd and 6.67 (w/w) for Palatase. Both lipases were stable for at least 4 days in the operational conditions. In the storage conditions (5 °C) lipases Rd and Palatase maintained constant activity for 5 months and 1 month, respectively.These catalysts have been used to obtain STAGs by acidolysis of tuna oil and CA in a PBR operating with recirculation of the reaction mixture through the lipase bed. Thus, STAGs with 52–53% CA and 14–15% DHA were obtained. These results were the basis for establishing the operational conditions to obtain STAGs operating in continuous mode. These new conditions were established maintaining constant intensity of treatment (IOT, lipase amount × reaction time/oil amount). In this way STAGs with 44–50% CA and 17–24% DHA were obtained operating in continuous mode. Although the compositions of STAGs obtained with both lipases were similar, Palatase required an IOT about four times higher than lipase Rd.To separate the acidolysis products (free fatty acids, FFAs, and STAGs) an extraction method of FFAs by water–ethanol solutions was tested. The following variables were optimized: water/ethanol ratio (the best results were attained with a water/ethanol ratio of 30:70, w/w), the solvent/FFA–STAG mixture ratio (3:1, w/w) and the number of extraction steps (3–5). In these conditions highly pure STAGs (93–96%) were obtained with a yield of 85%. The residual FFAs can be eliminated by neutralization with a hydroethanolic KOH solution to obtain pure STAGs. The positional analysis of these STAGs, carried out by alcoholysis catalyzed by lipase Novozym 435, has shown that CA represents 55% of fatty acids located at positions 1 and 3 and DHA represents 42% of fatty acids at position 2.     

Cyanuric acid biodegradation by a mixed bacterial culture of <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis> and <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. in a packed bed biofilm reactor

Cyanuric acid (1,3,5-triazine-2,4,6-triol [OOOT]) is a common biodegradation byproduct of triazinic herbicides, frequently accumulated in soils or water when supplementary carbon sources are absent. A binary bacterial culture able to degrade OOOT was selected through a continuous selection process accomplished in a chemostat fed with a mineral salt (MS) medium containing cyanuric acid as the sole carbon and nitrogen source. By sequence comparison of their 16S rDNA amplicons, bacterial strains were identified as Agrobacterium tumefaciens, and Acinetobacter sp. When the binary culture immobilized in a packed bed reactor (PBR) was fed with MS medium containing OOOT (50 mg L⁻¹), its removal efficiencies were about 95%; when it was fed with OOOT plus glucose (120 mg L⁻¹) as a supplementary carbon source, its removal efficiencies were closer to 100%. From sessile cells, attached to PBR porous support, or free cells present in the outflowing medium, DNA was extracted and used for Random Amplification of Polymorphic DNA analysis. Electrophoretic patterns obtained were compared to those of pure bacterial strains, a clear predominance of A. tumefaciens in PBR was observed. Although in continuous suspended cell culture, a stable binary community could be maintained, the attachment capability of A. tumefaciens represented a selective advantage over Acinetobacter sp. in the biofilm reactor, favoring its predominance in the porous stone support.     

Anaerobic treatment of complex chemical wastewater in a sequencing batch biofilm reactor: process optimization and evaluation of factor interactions using the Taguchi dynamic DOE methodology

The Taguchi robust experimental design (DOE) methodology has been applied on a dynamic anaerobic process treating complex wastewater by an anaerobic sequencing batch biofilm reactor (AnSBBR). For optimizing the process as well as to evaluate the influence of different factors on the process, the uncontrollable (noise) factors have been considered. The Taguchi methodology adopting dynamic approach is the first of its kind for studying anaerobic process evaluation and process optimization. The designed experimental methodology consisted of four phases--planning, conducting, analysis, and validation connected sequence-wise to achieve the overall optimization. In the experimental design, five controllable factors, i.e., organic loading rate (OLR), inlet pH, biodegradability (BOD/COD ratio), temperature, and sulfate concentration, along with the two uncontrollable (noise) factors, volatile fatty acids (VFA) and alkalinity at two levels were considered for optimization of the anae robic system. Thirty-two anaerobic experiments were conducted with a different combination of factors and the results obtained in terms of substrate degradation rates were processed in Qualitek-4 software to study the main effect of individual factors, interaction between the individual factors, and signal-to-noise (S/N) ratio analysis. Attempts were also made to achieve optimum conditions. Studies on the influence of individual factors on process performance revealed the intensive effect of OLR. In multiple factor interaction studies, biodegradability with other factors, such as temperature, pH, and sulfate have shown maximum influence over the process performance. The optimum conditions for the efficient performance of the anaerobic system in treating complex wastewater by considering dynamic (noise) factors obtained are higher organic loading rate of 3.5 Kg COD/m3 day, neutral pH with high biodegradability (BOD/COD ratio of 0.5), along with mesophilic temperature range (40 degrees C), and low sulfate concentration (700 mg/L). The optimization resulted in enhanced anaerobic performance (56.7%) from a substrate degradation rate (SDR) of 1.99 to 3.13 Kg COD/m3 day. Considering the obtained optimum factors, further validation experiments were carried out, which showed enhanced process performance (3.04 Kg COD/m3-day from 1.99 Kg COD/m3 day) accounting for 52.13% improvement with the optimized process conditions. The proposed method facilitated a systematic mathematical approach to understand the complex multi-species manifested anaerobic process treating complex chemical wastewater by considering the uncontrollable factors.