A cell leakproof PLGA‐collagen hybrid scaffold for cartilage tissue engineering

A cell leakproof porous poly(DL ‐lactic‐co‐glycolic acid) (PLGA)‐collagen hybrid scaffold was prepared by wrapping the surfaces of a collagen sponge except the top surface for cell seeding with a bi‐layered PLGA mesh. The PLGA‐collagen hybrid scaffold had a structure consisting of a central collagen sponge formed inside a bi‐layered PLGA mesh cup. The hybrid scaffold showed high mechanical strength. The cell seeding efficiency was 90.0% when human mesenchymal stem cells (MSCs) were seeded in the hybrid scaffold. The central collagen sponge provided enough space for cell loading and supported cell adhesion, while the bi‐layered PLGA mesh cup protected against cell leakage and provided high mechanical strength for the collagen sponge to maintain its shape during cell culture. The MSCs in the hybrid scaffolds showed round cell morphology after 4 weeks culture in chondrogenic induction medium. Immunostaining demonstrated that type II collagen and cartilaginous proteoglycan were detected in the extracellular matrices. Gene expression analyses by real‐time PCR showed that the genes encoding type II collagen, aggrecan, and SOX9 were upregulated. These results indicated that the MSCs differentiated and formed cartilage‐like tissue when being cultured in the cell leakproof PLGA‐collagen hybrid scaffold. The cell leakproof PLGA‐collagen hybrid scaffolds should be useful for applications in cartilage tissue engineering. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

微重力条件下细胞培养和组织工程研究进展

随着空间生命科学研究的发展,人们将细胞、组织培养技术与微重力环境相结合产生了组织工程研究的一个新领域——微重力组织工程。模拟微重力条件下细胞培养和组织构建研究表明,微重力环境有利于细胞的三维生长,形成具有功能的组织样结构,培养后的三维组织无论从形态上还是基因表达上都更接近于正常的机体组织。这种微重力对细胞的作用效应,将可能为未来组织工程和再生医学研究提供一条新途径。该文概述了近十年来国内外微重力组织工程相关研究的最新进展。     

Poly(lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold

Mass transfer limitations of scaffolds are currently hindering the development of 3-dimensional, clinically viable, tissue engineered constructs. We have developed a poly(lactide-co-glycolide) (PLGA) hollow fibre membrane scaffold that will provide support for cell culture, allow psuedovascularisation in vitro and provide channels for angiogenesis in vivo. We produced P(DL)LGA flat sheet membranes using 1, 4-dioxane and 1-methyl-2-pyrrolidinone (NMP) as solvents and water as the nonsolvent, and hollow fibre membranes, using NMP and water, by dry/wet- and wet-spinning. The resulting fibres had an outer diameter of 700 micro m and an inner diameter of 250 micro m with 0.2-1.0 micro m pores on the culture surface. It was shown that varying the air gap and temperature when spinning changed the morphology of the fibres. The introduction of a 50 mm air gap caused a dense skin of 5 micro m thick to form, compared to a skin of 0.5 micro m thick without an air gap. Spinning at 40 degrees C produced fibres with a more open central section in the wall that contained more, larger macrovoids compared to fibres spun at 20 degrees C. Culture of the immortalised osteogenic cell line 560pZIPv.neo (pZIP) was carried out on the P(DL)LGA flat sheets in static culture and in a P(DL)LGA hollow fibre bioreactor under counter-current flow conditions. Attachment and proliferation was statistically similar to tissue culture polystyrene on the flat sheets and was also successful in the hollow fibre bioreactor. The P(DL)LGA hollow fibres are a promising scaffold to address the size limitations currently seen in tissue engineered constructs.     

Enhancement of cell growth in tissue-engineering constructs under direct perfusion: Modeling and simulation

Perfusion bioreactors improve mass transfer in cell-scaffold constructs. We developed a mathematical model to simulate nutrient flow through cellular constructs. Interactions among cell proliferation, nutrient consumption, and culture medium circulation were investigated. The model incorporated modified Contois cell-growth kinetics that includes effects of nutrient saturation and limited cell growth. Nutrient uptake was depicted through the Michaelis-Menton kinetics. To describe the culture medium convection, the fluid flow outside the cell-scaffold construct was described by the Navier-Stokes equations, while the fluid dynamics within the construct was modeled by Brinkman's equation for porous media flow. Effects of the media perfusion were examined by including time-dependant porosity and permeability changes due to cell growth. The overall cell volume was considered to consist of cells and extracellular matrices (ECM) as a whole without treating ECM separately. Numerical simulations show when cells were cultured subjected to direct perfusion, they penetrated to a greater extent into the scaffold and resulted in a more uniform spatial distribution. The cell amount was increased by perfusion and ultimately approached an asymptotic value as the perfusion rates increased in terms of the dimensionless Peclet number that accounts for the ratio of nutrient perfusion to diffusion. In addition to enhancing the nutrient delivery, perfusion simultaneously imposes flow-mediated shear stress to the engineered cells. Shear stresses were found to increase with cell growth as the scaffold void space was occupied by the cell and ECM volumes. The macro average stresses increased from 0.2 mPa to 1 mPa at a perfusion rate of 20 microm/s with the overall cell volume fraction growing from 0.4 to 0.7, which made the overall permeability value decrease from 1.35 x 10(-2)cm(2) to 5.51 x 10(-4)cm(2). Relating the simulation results with perfusion experiments in literature, the average shear stresses were below the critical value that would induce the chondrocyte necrosis.     

A novel method for quantifying cell migration through tissue engineering scaffolds: evaluation of modified collagen matrices

A novel method to quantify cell migration through potential tissue engineering 3-d scaffolds is described. The migration assay uses a dot-blotting apparatus into which the tissue engineering matrix is placed on top of a nitrocellulose membrane. This assay was used to evaluate human dermal fibroblast migration through four porcine collagen matrices with varying pore diameters and pitch lengths. Fibroblasts were placed on the matrix surface, at between 1 ×10³–3 × 10³ cells mm^–2, and left for 18 h to allow migration. The nitrocellulose membrane was stained with haematoxylin, the membrane digitised and the pixel intensity of the stained cells quantified. We showed that for all matrix variants, migration was more effective with a higher initial seeding density. The application of varying initial cell densities resulted in the greatest extent of cell migration through the matrix variant with pores of 30 m diameter and 400 m pitch length (i.e. 10.3% migration at 1 ×10³ cells mm^–2). This method was coupled with confocal microscopy to evaluate the depth of cell migration within the matrix. At a depth of 20 m cell numbers were similar to those on the matrix surface: at a depth of 100 m only a few cells were observed.     

A novel modified culture medium for enhancing redifferentiation of chondrocytes for cartilage tissue engineering applications

The dedifferentiation of articular chondrocytes during in vitro expansion deteriorates the hyaline cartilage regeneration. Many approaches have been developed to enhance the redifferentiation of chondrocytes. In this study, a new and effective protocol to improve the redifferentiation of porcine chondrocytes in a pellet form was established. Pellets were initially treated in the modified culture media containing ternary mixtures, binary mixtures, or single reagents of sodium citrate (SCi), sodium chloride (SCh), and ethylenediaminetetraacetic acid (EDTA) at varied concentrations during the first 3 days of culture, followed by a normal culture medium until 21 days. Viability, proliferation, cartilaginous gene expression, extracellular matrix formation, and morphology of treated cell pellets were comparatively examined. Chondrocytes exposed to SCi, SCh, and EDTA individually or in combinations of two or three chemicals were non-cytotoxic when the concentration ranges of the chemicals were 1.83–2.75, 5.00–7.50, and 1.00–1.50 mM, respectively. Cells treated with the modified media containing EDTA alone and EDTA-containing mixtures enhanced glycosaminoglycan production as well as upregulated cartilaginous gene expression, despite their low proliferation rates. Overall, when all three reagents were in use, a pronounced synergistic effect on the activations of glycosaminoglycan accumulation and type II collagen production was explicitly observed at most, particularly when cells were cultured in the medium containing SCi, SCh, and EDTA at concentrations of 2.20, 6.00, and 1.20 mM, respectively. With a use of this protocol, the redifferentiation of articular chondrocytes for regeneration of hyaline cartilage for tissue engineering applications could be readily achieved.     

A compact computational model for cell construct development in perfusion culture

A problem nowadays tissue engineers encounter in developing sizable tissue implants is the nonuniform spread of cells and/or extracellular matrices. Research shows such a nutrients transport restriction may be improved by employing hydrodynamic culture systems. We propose a compact model for the simulation of cell growth in a porous construct under direct perfusion. Unlike the previous model proposed in the literature, which composes a cellular scaffold sandwiched between two culture media layers, the current model includes only the scaffold layer to simplify the mathematical and computational complex. Results show the present single-layer model can predict cell spreads and the nutrient and metabolic waste distribution as accurately as does the three-layer model. Only if the hydrodynamic aspects such as the pressure and viscous stress are prominent to know, should the more sophisticated analyses with the three-layer model be employed. The compact model provides comparable investigations for the tissue-engineering construct developments.     

A validated model of GAG deposition,cell distribution,and growth of tissue engineered cartilage cultured in a rotating bioreactor

In this work a new phenomenological model of growth of cartilage tissue cultured in a rotating bioreactor is developed. It represents an advancement of a previously derived model of deposition of glycosaminoglycan (GAG) in engineered cartilage by (i) introduction of physiological mechanisms of proteoglycan accumulation in the extracellular matrix (ECM) as well as by correlating (ii) local cell densities and (iii) tissue growth to the ECM composition. In particular, previously established predictions and correlations of local oxygen concentrations and GAG synthesis rates are extended to distinguish cell secreted proteoglycan monomers free to diffuse in cell surroundings and outside from the engineered construct, from large aggrecan molecules, which are constrained within the ECM and practically immovable. The model includes kinetics of aggregation, that is, transformation of mobile GAG species into immobile aggregates as well as maintenance of the normal ECM composition after the physiological GAG concentration is reached by incorporation of a product inhibition term. The model also includes mechanisms of the temporal evolution of cell density distributions and tissue growth under in vitro conditions. After a short initial proliferation phase the total cell number in the construct remains constant, but the local cell distribution is leveled out by GAG accumulation and repulsion due to negative molecular charges. Furthermore, strong repulsive forces result in expansion of the local tissue elements observed macroscopically as tissue growth (i.e., construct enlargement). The model is validated by comparison with experimental data of (i) GAG distribution and leakage, (ii) spatial‐temporal distributions of cells, and (iii) tissue growth reported in previous works. Validation of the model predictive capability—against a selection of measured data that were not used to construct the model—suggests that the model successfully describes the interplay of several simultaneous processes carried out during in vitro cartilage tissue regeneration and indicates that this approach could also be attractive for application in other tissue engineering systems. Biotechnol. Bioeng. 2010. 105: 842–853. © 2009 Wiley Periodicals, Inc.     

基于组织工程研究的可降解支架材料选择策略

目前,器官或组织移植是治疗器官衰竭或大范围组织缺损唯一长期有效的方法,但存在供体短缺、免疫排斥等问题。组织工程技术作为一种潜在的替代治疗方法,支架材料的选择是其中具有决定意义的组成部分。组织工程支架材料按其来源可分为天然及其改性修饰材料、人工合成与复合支架材料3种。组织工程目的就是修复临床上的病损组织或器官,并达到较理想的结构和功能的恢复。因此组织工程支架也必须从基本性质上具有一定的仿生化结构及功能,即"活"支架,这样才能彻底代替病损组织或器官。通过多种支架材料的优化组合(即材料的复合),对材料进行表面改性、制备工艺优化及添加细胞因子缓释微球等技术,模拟病损器官组织的特性及周围环境,有望打开组织工程的新局面。理想的组织工程支架应当以临床需要为根本目的,依靠材料学、分子生物学、工程学等多学科间的交叉研究,取各家之长,优化配比组合,达到仿生的目的。本课题组前期工作已经将骨髓间充质干细胞体外诱导分化为胆管上皮样细胞,并设计出左旋聚乳酸/聚己内酯共聚物(PLCL)胆道支架,内部混有包含生长因子的纳米缓释微球,供细胞因子的远期释放,支架内表面涂有基质胶/胶原混合层,且胶内加入bFGF、EGF,提供诱导因子的早期释放。将诱导细胞与PLCL胆道支架复合,制备组织工程胆管。文中综述了现存各类支架材料的研究状况,简单介绍了制备工艺、表面修饰等影响支架性能的因素,力求探索组织工程支架材料的选择策略。     

In vitro evaluation of natural marine sponge collagen as a scaffold for bone tissue engineering

The selection of a suitable scaffold matrix is critical for cell-based bone tissue engineering. This study aimed to identify and characterize natural marine sponges as potential bioscaffolds for osteogenesis. Callyspongiidae marine sponge samples were collected from the Fremantle coast of Western Australia. The sponge structure was assessed using scanning electron microscopy (SEM) and Hematoxylin and eosin. Mouse primary osteoblasts were seeded onto the sponge scaffold and immunostained with F-actin to assess cell attachment and aggregation. Alkaline phosphatase expression, von Kossa staining and real-time PCR were performed to examine the osteogenic potential of sponge samples. SEM revealed that the sponge skeleton possessed a collagenous fibrous network consisting of interconnecting channels and a porous structure that support cellular adhesion, aggregation and growth. The average pore size of the sponge skeleton was measured 100 to 300 μm in diameter. F-actin staining demonstrated that osteoblasts were able to anchor onto the surface of collagen fibres. Alkaline phosphatase expression, a marker of early osteoblast differentiation, was evident at 7 days although expression decreased steadily with long term culture. Using von Kossa staining, mineralisation nodules were evident after 21 days. Gene expression of osteoblast markers, osteocalcin and osteopontin, was also observed at 7, 14 and 21 days of culture. Together, these results suggest that the natural marine sponge is promising as a new scaffold for use in bone tissue engineering.     

Optimization of culture media to enhance the growth of tissue engineered cartilage

Tissue engineering is a promising option for cartilage repair. However, several hurdles still need to be overcome to develop functional tissue constructs suitable for implantation. One of the most common challenges is the general low capacity of chondrocytes to synthesize cartilage-specific extracellular matrix (ECM). While different approaches have been explored to improve the biosynthetic response of chondrocytes, several studies have demonstrated that the nutritional environment (e.g., glucose concentration and media volume) can have a profound effect on ECM synthesis. Thus, the purpose of this study was to optimize the formulation of cell culture media to upregulate the accumulation of cartilaginous ECM constituents (i.e., proteoglycans and collagen) by chondrocytes in 3D culture. Using response surface methodology, four different media factors (basal media, media volume, glucose, and glutamine) were first screened to determine optimal media formulations. Constructs were then cultured under candidate optimal media formulations for 4 weeks and analyzed for their biochemical and structural properties. Interestingly, the maximal accumulation of proteoglycans and collagen appeared to be elicited by different media formulations. Most notably, proteoglycan accumulation was favored by high volume, low glucose-containing DMEM/F12 (1:1) media whereas collagen accumulation was favored by high volume, high glucose-containing F12 media. While high glutamine-containing media elicited increased DNA content, glutamine concentration had no apparent effect on ECM accumulation. Therefore, optimizing the nutritional environment during chondrocyte culture appears to be a promising, straight-forward approach to improve cartilaginous tissue formation. Future work will investigate the combined effects of the nutritional environment and external stimuli.     

The optimization of a scaffold for cartilage regeneration

Natural polymers offer various advantages in cartilage tissue engineering applications, thanks to their intrinsic bioactivity and adaptability, which can be exploited for the optimization of scaffold properties. In particular, silk fibroin has multifunctional features driven by the self-assembly of molecular subunits in appropriate environmental conditions. For these reasons, it was used in combination with hyaluronic acid to produce porous sponges for cartilage regeneration. The added amount of hyaluronic acid and the cross-linking with genipin modulated scaffold properties in a synergistic way, showing a strong inter-correlation among macroscopic and microscopic characteristics. Interestingly, hyaluronic acid affected silk fibroin conformation and induced a physical separation between the two material components in absence of genipin. Instead, this was prevented by the cross-linking reaction, resulting in a more interspersed network of protein and polysaccharide molecules partially resembling the structure of cartilage extracellular matrix. In addition, the systematic evaluation of sponge properties and how they can be modulated will represent a significant starting point for the interpretation of the complex outcomes driven by the scaffold in vitro and in vivo.     

Skeletal muscle tissue engineering

The reconstruction of skeletal muscle tissue either lost by traumatic injury or tumor ablation or functional damage due to myopathies is hampered by the lack of availability of functional substitution of this native tissue. Until now, only few alternatives exist to provide functional restoration of damaged muscle tissues. Loss of muscle mass and their function can surgically managed in part using a variety of muscle transplantation or transposition techniques. These techniques represent a limited degree of success in attempts to restore the normal functioning, however they are not perfect solutions. A new alternative approach to addressing difficult tissue reconstruction is to engineer new tissues. Although those tissue engineering techniques attempting regeneration of human tissues and organs have recently entered into clinical practice, the engineering of skeletal muscle tissue ist still a scientific challenge. This article reviews some of the recent findings resulting from tissue engineering science related to the attempt of creation and regeneration of functional skeletal muscle tissue.     

Multiscale tissue engineering for liver reconstruction

The liver is a target of in vitro tissue engineering despite its capability to regenerate in vivo. The construction of liver tissues in vitro remains challenging. In this review, conventional 3D cultures of hepatocytes are first discussed. Recent advances in the 3D culturing of liver cells are then summarized in the context of in vitro liver tissue reconstruction at the micro- and macroscales. The application of microfluidics technology to liver tissue engineering has been introduced as a bottom-up approach performed at the microscale, whereas whole-organ bioengineering technology was introduced as a top-down approach performed at the macroscale. Mesoscale approaches are also discussed in considering the integration of micro- and macroscale approaches. Multiple parallel multiscale liver tissue engineering studies are ongoing; however, no tissue-engineered liver that is appropriate for clinical use has yet been realized. The integration of multiscale tissue engineering studies is essential for further understanding of liver reconstruction strategies.