ITO‐Free,Small‐Molecule Organic Solar Cells on Spray‐Coated Copper‐Nanowire‐Based Transparent Electrodes

The great potential of solution‐processed metal nanowire networks utilized as a transparent electrode has attracted much attention in the last years. Typically, silver nanowires are applied, although their replacement by more abundant and cheaper materials is of interest. Here, a hydrazine‐free synthesis route for high aspect ratio copper nanowires is used to prepare conductive networks showing an enhanced electrode performance. The network deposition is done with a scalable spray‐coating process on glass and on polymer foils. By a pressing or an annealing step, highly conductive transparent electrodes are obtained, and they reveal transmittance‐resistance values similar to indium tin oxide (ITO) and networks made of silver nanowires. The application potential of the copper nanowire electrodes is demonstrated by integrating them into an evaporated small‐molecule organic solar cell with 3% efficiency.     

Preparation of a colored conductive paint electrode for electrochemical inactivation of bacteria

In this study we describe the preparation of a colored conductive paint electrode containing In(2)O(3), SnO(2), or TiO(2) for the electrochemical inactivation of marine bacteria. When each colored conductive paint electrode was immersed in seawater containing 10(6) cells/mL for 90 min, marine microbe attachment to the TiO(2)/SnO(2)/Sb electrode surface was minimal. Preparation of electrodes coated with 40% particles is shown to be more cost-effective, and because of their more translucent coatings they can be painted over with bright colors. When a potential of 1.0 V was applied for 30 min to the colored conductive paint electrode (40 wt% TiO(2)/SnO(2)/Sb) in sterile seawater, the survival ratio decreased to 55%. When 1.5 V vs. saturated calomel electrode (SCE) was applied, all attached cells were inactivated. Chlorine was not detected below an applied potential of 1.5 V. A change in pH was not observed in the range of 0 to 1.5 V. This method might be effective for preventing bacterial cell accumulation and the formation of biofilms.     

Deep brain stimulation: Challenges at the tissue-electrode interface and current solutions

Deep brain stimulation (DBS) is used to treat the motor symptoms of Parkinson's disease patients by stimulating the subthalamic nucleus. However, optimization of DBS is still needed since the performance of the neural electrodes is limited by the body's response to the implant. This review discusses the issues with DBS, such as placement of electrodes, foreign body response, and electrode degradation. The current solutions to these technical issues include modifications to electrode material, coatings, and geometry.     

Characterization and redox properties of cytochrome c552 from Thermus thermophilus adsorbed on different self-assembled thiol monolayers, used to model the chemical environment of the redox partner

The structure of cytochrome c552 (Cyt-c552) from Thermus thermophilus shows many differences to other c-type cytochromes. The rich lysine domain close to the heme does not exist in this cytochrome, allowing us to postulate that the interaction with its redox partner must be different to the cytochrome c/cytochrome c oxidase interaction. We report a study of Cyt-c552 adsorbed on self-assembled monolayers (SAMs) of functionalized alkanethiols used to mimic the chemical properties of its redox partner (ba3-oxydase). Hydrophilic (-COOH), polar (-OH), hydrophobic (-CH3), and mixed (-OH/-CH3) SAMs grafted on roughened silver electrodes were characterized by X-ray photoelectron spectroscopy. Surface enhanced resonance Raman spectroscopy (SERRS) was employed to determine the structure and the redox properties (E degrees and number of transferred electron) of the heme of Cyt-c552 adsorbed on roughened silver electrodes coated by the different SAMs. The surface that most closely models the environment of the ba3-oxidase is a mixed SAM formed by 50% polar [Ag-(CH2)5-CH2OH] and 50% hydrophobic [Ag-(CH2)5-CH3] alkanethiols. Only the native form B1(6cLS) of Cyt-c552 is detected by SERRS when the protein is adsorbed on such a surface that promotes a protein orientation favorable for the electron transfer (number of transferred electron = 1). We shall discuss the differences and similarities of the electron-transfer mechanism of Cyt-c552 compared to cyt-c.     

A Three‐Dimensionally Interconnected Carbon Nanotube–Conducting Polymer Hydrogel Network for High‐Performance Flexible Battery Electrodes

High‐performance flexible energy‐storage devices have great potential as power sources for wearable electronics. One major limitation to the realization of these applications is the lack of flexible electrodes with excellent mechanical and electrochemical properties. Currently employed batteries and supercapacitors are mainly based on electrodes that are not flexible enough for these purposes. Here, a three‐dimensionally interconnected hybrid hydrogel system based on carbon nanotube (CNT)‐conductive polymer network architecture is reported for high‐performance flexible lithium ion battery electrodes. Unlike previously reported conducting polymers (e.g., polyaniline, polypyrrole, polythiophene), which are mechanically fragile and incompatible with aqueous solution processing, this interpenetrating network of the CNT‐conducting polymer hydrogel exibits good mechanical properties, high conductivity, and facile ion transport, leading to facile electrode kinetics and high strain tolerance during electrode volume change. A high‐rate capability for TiO₂ and high cycling stability for SiNP electrodes are reported. Typically, the flexible TiO₂ electrodes achieved a capacity of 76 mAh g^–1 in 40 s of charge/discharge and a high areal capacity of 2.2 mAh cm^–2 can be obtained for flexible SiNP‐based electrodes at 0.1C rate. This simple yet efficient solution process is promising for the fabrication of a variety of high performance flexible electrodes.     

Site-specific covalent attachment of heme proteins on self-assembled monolayers

Naturally occurring hemin cofactor has been functionalized to introduce two terminal alkyne groups. This modified hemin has been successfully covalently attached to mixed self-assembled monolayers of alkanethiols and azide-terminated alkanethiols on gold electrodes using a Cu(I)-catalyzed 1,3-cycloaddition reaction. However these hemin-modified electrodes could not be used to reconstitute apomyoglobin on gold electrodes owing to the hydrophobicity of the alkane thiol self-assembled monolayer. Modification of existing techniques allowed covalent attachment of alkyne-terminated electroactive species onto mixed monolayers of azidothiols and carboxylatoalkanethiols on electrodes using the same Cu(I)-catalyzed 1,3-cycloaddition reaction. Apomyoglobin could be reconstituted using the hemin covalently attached to these hydrophilic electrodes. The electrochemical data, UV-vis absorption data, surface-enhanced resonance Raman spectroscopy data, and atomic force microscopy data indicate the presence of these modified myoglobin proteins on these electrodes. The direct attachment of the heme cofactor of these modified myoglobin proteins to the electrode allows fast electron transfer to the heme center from the electrode and affords efficient O(2)-reducing bioelectrodes under physiological conditions.     

Electrochemical characterization of Geobacter sulfurreducens cells immobilized on graphite paper electrodes

Bacteria able to transfer electrons to conductive surfaces are of interest as catalysts in microbial fuel cells, as well as in bioprocessing, bioremediation, and corrosion. New procedures for immobilization of Geobacter sulfurreducens on graphite electrodes are described that allow routine, repeatable electrochemical analysis of cell-electrode interactions. Immediately after immobilizing G. sulfurreducens on electrodes, electrical current was obtained without addition of exogenous electron shuttles or electroactive polymers. Voltammetry and impedance analysis of pectin-immobilized bacteria transferring electrons to electrode surfaces could also be performed. Cyclic voltammetry of immobilized cells revealed voltage-dependent catalytic current similar to what is commonly observed with adsorbed enzymes, with catalytic waves centered at -0.15 V (vs. SHE). Electrodes maintained at +0.25 V (vs. SHE) initially produced 0.52 A/m(2) in the presence of acetate as the electron donor. Electrical Impedance Spectroscopy of coatings was also consistent with a catalytic mechanism, controlled by charge transfer rate. When electrodes were maintained at an oxidizing potential for 24 h, electron transfer to electrodes increased to 1.75 A/m(2). These observations of electron transfer by pectin-entrapped G. sulfurreducens appear to reflect native mechanisms used for respiration. The ability of washed G. sulfurreducens cells to immediately produce electrical current was consistent with the external surface of this bacterium possessing a pathway linking oxidative metabolism to extracellular electron transfer. This electrochemical activity of pectin-immobilized bacteria illustrates a strategy for preparation of catalytic electrodes and study of Geobacter under defined conditions.     

Active site structure and dynamics of cytochrome c3 from Desulfovibrio gigas immobilized on electrodes

Cytochrome c3 from Desulfovibrio gigas is electrostatically adsorbed on Ag electrodes coated with self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid. The redox equilibria and electron transfer dynamics of the adsorbed four-heme protein are studied by surface enhanced resonance Raman spectroscopy. Immobilization on the coated electrodes does not cause any structural changes in the redox sites. The potential-dependent stationary experiments distinguish the redox potential of heme IV (-0.19 V versus normal hydrogen electrode) from those of the other hemes for which an average value of -0.3 V is determined. Taking into account the interfacial potential drops, these values are in good agreement with the redox potentials of the protein in solution. The heterogenous electron transfer between the electrode and heme IV of the adsorbed cytochrome c3 is analyzed on the basis of time-resolved experiments, leading to a formal electron transfer rate constant of 15 s(-1), which is a factor of 3 smaller than that of the monoheme protein cytochrome c.     

Synthesis,copolymerization and peptide-modification of carboxylic acid-functionalized 3,4-ethylenedioxythiophene (EDOTacid) for neural electrode interfaces

Background

Conjugated polymers have been developed as effective materials for interfacing prosthetic device electrodes with neural tissue. Recent focus has been on the development of conjugated polymers that contain biological components in order to improve the tissue response upon implantation of these electrodes.

Methods

Carboxylic acid-functionalized 3,4-ethylenedioxythiophene (EDOTacid) monomer was synthesized in order to covalently bind peptides to the surface of conjugated polymer films. EDOTacid was copolymerized with EDOT monomer to form stable, electrically conductive copolymer films referred to as PEDOT-PEDOTacid. The peptide GGGGRGDS was bound to PEDOT-PEDOTacid to create peptide functionalized PEDOT films.

Results

The PEDOT-PEDOTacid-peptide films increased the adhesion of primary rat motor neurons between 3 and 9 times higher than controls, thus demonstrating that the peptide maintained its biological activity.

Conclusions

The EDOT-acid monomer can be used to create functionalized PEDOT-PEDOTacid copolymer films that can have controlled bioactivity.

General Significance

PEDOT-PEDOTacid-peptide films have the potential to control the behavior of neurons and vastly improve the performance of implanted electrodes. This article is part of a Special Issue entitled Organic Bioelectronics—Novel Applications in Biomedicine.     

Bioelectrocatalytic detection of theophylline at theophylline oxidase electrodes

Bioelectrocatalytic oxidation of theophylline was studied at gold and graphite electrodes modified with microbial theophylline oxidase (ThOx), a multi-cofactor redox enzyme capable of selective oxidation of theophylline. Gold electrodes were additionally modified with self-assembled monolayers (SAMs) of (-OH)- and (-NH(2))-terminated alkanethiols of different chain lengths, to achieve compatibility between ThOx and the electrode surface. On graphite, ThOx was either physically co-adsorbed with a surfactant didodecyldimethylammonium bromide (DDAB), or entrapped within an Os-redox-polymer film. At all electrodes, ThOx was bioelectrocatalytically active; direct electrochemistry of ThOx in the absence of theophylline was followed only at the SAM-modified gold electrodes. Direct electrochemistry of ThOx correlated with redox transformations of the heme domain of ThOx, with a E(o/)of -110+/-2 mV versus Ag|AgCl, at pH 7. Bioelectrocatalytic oxidation of theophylline was optimal at mixed (-OH)/(-NH(2))-terminated SAMs; co-adsorption of ThOx with DDAB improved the bioelectrocatalytic performance of the ThOx-electrode. In both cases, the response to theophylline was within the mM range. Alternatively, a reagentless ThOx-electrode based on ThOx cross-linked within the Os-redox-polymer matrix demonstrated a linear response to theophylline within the physiologically important 0.02-0.6mM (3.6-72 mg l(-1)) concentration range with a sensitivity of 52.1+/-7.8 mA cm(-2)M(-1).     

Chronopotentiometry and Faradaic impedance spectroscopy as signal transduction methods for the biocatalytic precipitation of an insoluble product on electrode supports: routes for enzyme sensors, immunosensors and DNA sensors

The biocatalyzed precipitation of an insoluble product produced on electrode supports is used as an amplification path for biosensing. Enzyme-based electrodes, immunosensors and DNA sensors are developed using this biocatalytic precipitation route. Faradaic impedance spectroscopy and chronopotentiometry are used as transduction methods to follow the precipitation processes. While Faradaic impedance spectroscopy leads to the characterization of the electron-transfer resistance at the electrode, chronopotentiometry provides the total resistance at the interfaces of the modified electrodes. A horseradish peroxidase, HRP, monolayer-functionalized electrode is used to sense H₂O₂ by the biocatalyzed oxidation of 4-chloro-1-naphthol (1), to the insoluble product benzo-4-chlorohexadienone (2). An antigen monolayer electrode is used to sense the dinitrophenyl antibody, DNP-Ab, applying an anti-antibody–HRP conjugate as a biocatalyst for the oxidative precipitation of 1 by H₂O₂ to yield the insoluble product 2. An oligonucleotide (3) functionalized monolayer electrode is used to sense the DNA-analyte (4), that is one of the Tay–Sachs genetic disorder mutants. Association of a biotin-labeled oligonucleotide to the sensing interface, followed by the association of the avidin–HRP conjugate and the biocatalyzed precipitation of 2 leads to the amplified sensing of 4. The amount of the precipitate accumulated on the conductive support is controlled by the concentration of the respective analytes and the time intervals employed for the biocatalytic precipitation of 2. The electron-transfer resistances of the electrodes covered by the insoluble product (2) are derived from Faradaic impedance measurements, whereas the total electrode resistances are extracted from chronopotentiometric experiments. A good correlation between the total electrode resistances and the electron-transfer resistances at the conducting supports are found. Chronopotentiometry is suggested as a rapid transduction means (a few seconds). The precautions needed to apply chronopotentiometry in biosensors are discussed.     

Electrocatalytic oxidation of guanine, guanosine, and guanosine monophosphate

The electrochemical behavior of guanine, guanosine, and guanosine monophosphate (GMP) at redox polymer film modified indium tin oxide electrodes is examined by voltammetry and redox titration. Utilizing the redox polymer-coated electrodes as indicator electrodes, a new method for measuring the oxidation potentials, based on monitoring their catalytic oxidation by different redox polymer coated electrodes at different pH, was proposed in this work. The oxidation potentials of 0.81 V and 1.02 V versus normal hydrogen electrode were determined for guanine and guanosine/GMP under physiological conditions, the lowest oxidation potentials ever reported, to our knowledge.     

聚3，4乙烯二氧噻吩修饰的新型碳纳米管纤维电极及其电化学性能评价

目的 植入式脑机接口在神经疾病的治疗方面已经得到了广泛应用，治疗的效果依赖于与神经组织接触的电极。与刚性材料制作的电极相比，碳基微纤维电极尺度小、生物兼容性好、组织炎症反应小，可以减少植入后的异物反应，改善神经记录信号的信噪比，可以长期保持稳定的电极特性。方法 本文设计了一种柔性碳纳米管（carbon nanotubes，CNTs）纤维电极的修饰方法，该方法采用电化学聚合的方式可以将聚3,4-乙烯二氧噻吩（poly（3,4-ethylenedioxythiophene），PEDOT）薄膜沉积到CNTs纤维电极上，作为微电极涂层。为了证明修饰涂层在电极表面具有良好的机械稳定性，对修饰电极进行了超声处理。此外，本文将PEDOT薄膜沉积到ITO玻璃上，评价了PEDOT薄膜的生物相容性。结果 恒电流方式在CNTs纤维电极表面沉积的PEDOT涂层降低了电极的电化学阻抗，提高了电极的电化学性能，且PEDOT沉积的时间越长阻抗减少的幅度越明显。对电极进行超声处理后，电极的电化学阻抗没有产生显著变化，说明超声处理后PEDOT涂层剥离较少，证明了修饰涂层在电极表面具有良好的机械稳定性。最后，细胞实验表明，PEDOT薄膜具有与ITO导电玻璃相当的细胞相容性。结论 PEDOT薄膜可以提高CNTs纤维电极的稳定性，有望提高脑机接口系统的寿命和可靠性，具有应用于长时间记录神经电信号的前景。     

Microfabricated nerve–electrode interfaces in neural prosthetics and neural engineering

Neural interfaces and implants are finding more clinical applications and there are rapid technological advances for more efficient and safe design, fabrication and materials to establish high-fidelity neural interfaces. In this review paper, we highlight new developments of the microfabricated electrodes and substrates with regard to the design, materials, fabrication and their clinical applications. There is a noticeable trend towards integration of microfluidic modules on a single neural platform. In addition to the microelectrodes for neural recording and stimulation, microfluidic channels are integrated into a nerve–electrode interface to explore the rich neurochemistry present at the neural interface and exploit it for enhanced electrochemical stimulation and recording of the central and peripheral nervous system.     

Gum‐Like Nanocomposites as Conformable,Conductive, and Adhesive Electrode Matrix for Energy Storage Devices

The electrodes in energy storage devices, such as lithium/sodium ion batteries, are typical multicomponent system consisting of inorganic electrode particles, polymer binders, conductive fillers, current collectors, and other components. These components are usually porously combined by a polymeric binder to accomplish the required electrochemical functions. In spite of the great success, this classic porous configuration faces serious issues in mechanical stability and flexibility due to weak and instable structures/interfaces. Here, by learning from polymeric nanocomposites, a concept of electrode matrix is proposed based on a gum‐like nanocomposite, a dual‐conductive adhesive. As an electrode matrix, the gum‐like nanocomposite integrates the functions of binder, electrolyte, and conductive fillers. In particular, it shows strong adhesion, high electrical/ionic conductivities, and appropriate mechanical and self‐healing properties. Finally, it is demonstrated that, with the electrode matrix, battery electrodes can be fabricated into nonporous composite showing not only excellent mechanical flexibility/stability but also improved electrochemical performance when working with a gum‐like electrolyte.     

Fabrication of bienzyme nanobiocomposite electrode using functionalized carbon nanotubes for biosensing applications

Mediated biosensors consisting of an oxidase and peroxidase (POx) have attracted increasing attention because of their wider applicability. This work presents a novel approach to fabricate nanobiocomposite bienzymatic biosensor based on functionalized multiwalled carbon nanotubes (MWNTs) with the aim of evaluating their ability as sensing elements in amperometric transducers. Electrochemical behavior of the bienzymatic nanobiocomposite biosensor is investigated by Faradaic impedance spectroscopy and cyclic voltammetry. The results indicate that glucose oxidase (GOD) and horseradish peroxidase (HRP) are strongly adsorbed on the surface of the thionin (TH) functionalized MWNTs and demonstrate a facile electron transfer between immobilized GOD/HRP and the electrode via the functionalized MWNTs in a Nafion film. The functionalized carbon nanotubes act as molecular wires to allow efficient electron transfer between the underlying electrode and the redox centres of enzymes through TH. Linear ranges for these electrodes are from 10 nM to 10 mM for glucose and 17 nM to 56 mM for hydrogen peroxide with the detection limit of 3 and 6 nM, respectively. A remarkable feature of the bienzyme electrode is the possibility to determine glucose and hydrogen peroxide at a very low applied potential where the noise level and interferences from other electroactive compounds are minimal. Performance of the biosensor is evaluated with respect to response time, detection limit, selectivity, temperature and pH as well as operating and storage stability.     

Photoresist-Free Patterning by Mechanical Abrasion of Water-Soluble Lift-Off Resists and Bare Substrates: Toward Green Fabrication of Transparent Electrodes

This paper describes the fabrication of transparent electrodes based on grids of copper microwires using a non-photolithographic process. The process—“abrasion lithography”—takes two forms. In the first implementation (Method I), a water-soluble commodity polymer film is abraded with a sharp tool, coated with a conductive film, and developed by immersion in water. Water dissolves the polymer film and lifts off the conductive film in the unabraded areas. In the second implementation (Method II), the substrate is abraded directly by scratching with a sharp tool (i.e., no polymer film necessary). The abraded regions of the substrate are recessed and roughened. Following deposition of a conductive film, the lower profile and roughened topography in the abraded regions prevents mechanical exfoliation of the conductive film using adhesive tape, and thus the conductive film remains only where the substrate is scratched. As an application, conductive grids exhibit average sheet resistances of 17 Ω sq^–1 and transparencies of 86% are fabricated and used as the anode in organic photovoltaic cells in concert with the conductive polymer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). Compared to devices in which PEDOT:PSS alone serves as an anode, devices comprising grids of copper/nickel microwires and PEDOT:PSS exhibit lowered series resistance, which manifests in greater fill factor and power conversion efficiency. This simple method of forming micropatterns could find use in applications where cost and environmental impact should be minimized, especially as a potential replacement for the transparent electrode indium tin oxide (ITO) in thin-film electronics over large areas (i.e., solar cells) or as a method of rapid prototyping for laboratory-scale devices.     

Mediatorless voltammetric oxidation of NADH and sensing of ethanol

A simple, selective and sensitive method for the detection of NADH and ethanol is presented. Self-assembled monolayers (SAMs) of mercaptopyrimidine (MPM) and their derivatives, thiocytosine (TC) and 4,6-diamino-2-mercaptopyrimidine (DMP) on gold (Au) electrode are used for the voltammetric detection of NADH and ethanol in neutral aqueous solution. A decrease of 200-300 mV in the overpotential associated with an observable increase in the peak current was obtained for the oxidation of NADH on MPM and TC monolayer-modified electrodes without any redox mediator. The facilitated electron transfer for the oxidation of NADH at the TC monolayer is ascribed to the existence of stable cationic p-quinonoid form of TC. The electrode modified with DMP monolayer could not exhibit stable response for NADH owing to the fouling of electrode surface. The MPM and TC monolayer-modified electrodes show high selectivity and excellent sensitivity (MPM: 0.633+/-0.005 microA cm(-2) microM(-1); TC: 0.658+/-0.008 microA cm(-2) microM(-1)) towards NADH with detection limit (3sigma) of 2.5 and 0.5 microM, respectively. Presence of large excess of ascorbate (AA) does not interfere the detection of NADH and the monolayer-modified electrode shows individual voltammetric peaks for AA and NADH. Voltammetric sensing of ethanol using alcohol dehydrogenase on MPM and TC monolayer-modified electrode is successfully demonstrated and these electrode can detect as low as 0.5 mM ethanol in neutral pH. The sensitivity of the MPM and TC monolayer-modified electrodes toward ethanol was found to be 3.24+/-0.03 and 3.435+/-0.04 microA cm(-2) mM(-1), respectively.     

Improvement of Transparent Metal Top Electrodes for Organic Solar Cells by Introducing a High Surface Energy Seed Layer

We present highly transparent and conductive silver thin films in a thermally evaporated dielectric/metal/dielectric (DMD) multilayer architecture as top electrode for efficient small molecule organic solar cells. DMD electrodes are frequently used for optoelectronic devices and exhibit excellent optical and electrical properties. Here, we show that ultrathin seed layers such as calcium, aluminum, and gold of only 1 nm thickness strongly influence the morphology of the subsequently deposited silver layer used as electrode. The wetting of silver on the substrate is significantly improved with increasing surface energy of the seed material resulting in enhanced optical and electrical properties. Typically thermally evaporated silver on a dielectric material forms rough and granular layers which are not closed and not conductive below thicknesses of 10 nm. With gold acting as seed layer, the silver electrode forms a continuous, smooth, conductive layer down to a silver thickness of 3 nm. At 7 nm silver thickness such an electrode exhibits a sheet resistance of 19 Ω/□ and a peak transmittance of 83% at 580 nm wavelength, both superior compared to silver electrodes without seed layer and even to indium tin oxide (ITO). Top‐illuminated solar cells using gold/silver double layer electrodes achieve power conversion efficiencies of 4.7%, which is equal to 4.6% observed in bottom‐illuminated reference devices employing conventional ITO. The top electrodes investigated here exhibit promising properties for semitransparent solar cells or devices fabricated on opaque substrates.     

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

High‐performance, breathable, conductive, and flexible polypyrrole (PPy) coated paper electrodes are prepared by an interfacial polymerization method using air‐laid paper as a substrate. Owing to the synergistic effect of superior electrical conductivity, high wettability, and the porous architecture, the prepared electrode not only shows an outstanding specific capacitance and rate abilities (3100 and 2579 mF cm^?2 at 1 and 20 mA cm^?2 for a PPy coated paper electrode), but also exhibits excellent flexibility, wearability, and breathability. Based on these superior features, an all‐solid‐state supercapacitor assembled with the PPy coated paper electrodes shows an outstanding energy density of 62.4 µW h cm^?2, remarkable air permeability and excellent flexibility to sustain various deformations. Furthermore, large‐scale fabrication of conductive flexible paper electrode can be easily achieved through this method. Therefore, this work offers a new vision for flexible energy storage.