Looking for high energy density compounds among polynitraminecubanes

Based on fully optimized geometric structures at DFT-B3LYP/6-311G** level, we calculated electronic structures, heats of formation, strain energies, bond dissociation energies and detonation performance (detonation velocity and detonation pressure) for a series of polynitraminecubanes. Our results have shown that energy gaps of cubane derivatives are much higher than that of triaminotrinitrobenzene (TATB), which means that cubane derivatives may be more sensitive than TATB. Polynitraminecubanes have high and positive heats of formation, and a good linear relationship between heats of formation and nitramine group numbers was presented. As the number of nitramine groups in the molecule increases, the enthalpies of combustion values are increasingly negative, but the specific enthalpy of combustion values decreases. It is found that all cubane derivatives have high strain energies, which are affected by the number and position of nitramine group. The calculated bond dissociation energies of C-NHNO₂ and C-C bond show that the C-C bond should be the trigger bond in the pyrolysis process. It is found that detonation velocity (D), detonation pressure (P) and molecule density (ρ) have good linear relationship with substituented group numbers. Heptanitraminecubane and octanitraminecubane have good detonation performance over 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX), and they can be regarded as potential candidates of high energy density compounds (HEDCs). The results have not only shown that these compounds may be used as HEDCs, but also provide some useful information for further investigation.     

Looking for high energy density compounds among polynitraminepurines

A series of purine derivatives with nitramine groups are calculated by using density functional theory (DFT). The molecular theory density, heats of formation, bond dissociation energies and detonation performance are investigated at DFT-B3LYP/6-311G** level. The isodesmic reaction method is employed to calculate the HOFs of the energies obtained from electronic structure calculations. Results show that the position of nitramine groups can influence the values of HOFs. The bond dissociation energies and the impact sensitivity are analyzed to investigate the thermal stability of the purine derivatives. The calculated bond dissociation energies of ring-NHNO₂ and NH-NO₂ bond show that the NH-NO₂ bond should be the trigger bond in pyrolysis processes. The H₅₀ of most compounds are larger than that of CL-20 and RDX.     

Protein nutrition in fish: protein/energy ratio and alternative protein sources to fish meal

Those interested in the design and manufacture of feeds for intensive fish farming face the basic concern of formulating mixtures for the best yield at the lowest costs. Of the macronutrients in the feed, protein has and continues to receive special consideration because fish present high and specific needs for this constituent. Traditionally, protein has been supplied primarily by fish meals. This paper presents a synthesis of the efforts made and the lines explored to achieve an effective reduction of the amount of fish meal in the feeds for fish, following two strategies: reduction of the protein in the feeds and the use of new raw materials to replace fish meal.     

ATP and GTP as alternative energy sources for vinblastine transport by P-170 in KB-V1 plasma membrane vesicles.

Purified plasma membrane vesicles isolated from multidrug-resistant human KB-V1 cells accumulate [3H]vinblastine in an energy-dependent manner. The accumulation of [3H]vinblastine in the presence of ATP is a saturable process. ATP can be replaced by other purine nucleotide triphosphates, of which GTP is the most efficient.     

Tennessee plant species screened for renewable energy sources

The USDA Northern Regional Research Center (NRRC) has previously studied chemical and botanical characteristics of about 1,000 plant species in efforts to identify potential new plant sources for industrial raw materials. For this report, an additional 51 species were collected from Tennessee and studied. Above-ground plant samples were analyzed for yields of oils, polyphenols, hydrocarbons, protein, and ash. Oils were examined for the presence of seven classes of lipids and analyzed for yields of fatty acids and unsaponifiable matter. Hydrocarbons were examined for the presence of rubber, gutta, and waxes. Rubber and gutta were analyzed for average molecular weight (MW) and MW distribution. Chemical and botanical data are presented for eight of the 51 species. A checklist of the 43 other species is given; data on these are available from NRRC.Lapsana communis yielded the most oil (6.1%; dry, ash-free, plant sample basis).Ilex montana yielded the most polyphenol (21.5%) plus 4.5% oil.Agrimonia parviflora and Catalpa bignonioides gave substantial yields of polyphenol (20.0% and 17.9%, respectively), andPassiflora incarnata contained the most apparent protein (19.8%).Chrysopsis graminifolia, Solidago erecta, andVerbesina alternifolia were identified as rubber-producing species with 0.4-0.7% hydrocarbon.     

Assimilation of alternative sulfur sources in fungi

Fungi are well known for their metabolic versatility, whether it is the degradation of complex organic substrates or the biosynthesis of intricate secondary metabolites. The vast majority of studies concerning fungal metabolic pathways for sulfur assimilation have focused on conventional sources of sulfur such as inorganic sulfur ions and sulfur-containing biomolecules. Less is known about the metabolic pathways involved in the assimilation of so-called “alternative” sulfur sources such as sulfides, sulfoxides, sulfones, sulfonates, sulfate esters and sulfamates. This review summarizes our current knowledge regarding the structural diversity of sulfur compounds assimilated by fungi as well as the biochemistry and genetics of metabolic pathways involved in this process. Shared sequence homology between bacterial and fungal sulfur assimilation genes have lead to the identification of several candidate genes in fungi while other enzyme activities and pathways so far appear to be specific to the fungal kingdom. Increased knowledge of how fungi catabolize this group of compounds will ultimately contribute to a more complete understanding of sulfur cycling in nature as well as the environmental fate of sulfur-containing xenobiotics.     

Evaluation of 107 legumes for renewable sources of energy

One hundred and seven species of randomly-collected Leguminosae were evaluated for their potential as energy-producing crops. Whole plants, excluding roots, were chemically analyzed, and 11 species were identified as the more promising for future considerations based on a numerical rating system developed at this Center. Botanical, fiber, and protein characteristics of the more promising species that had ratings of less than 11 were considered excellent. Other characteristics, including contents of oil (1.7–3.2%; dry, ash-free, sample basis), polyphenol (5.4–16.5%), and hydrocarbon (0.3–0.6% for 10 species and 2.6% for one), were generally lower than those of promising species in other families previously analyzed. Of the 11 species, one contained principally rubber (polyisoprene) in the hydrocarbon fraction and 7 contained principally wax. Hydrocarbon fractions of 3 species with less than 0.4% were not examined. The oils of species with at least 3.0% oil were examined by thin layer chromatography (TLC) to determine classes of components and were given a saponification treatment to determine yields of unsaponifiable matter and fatty acids. The oil of one species was quantitatively analyzed for classes of compounds by TLC-flame ionization detection. Selected species with ratings greater than 10 are briefly discussed.     

Distillery and curd whey wastes as viable alternative sources for biosurfactant production

Biosurfactant production from synthetic medium and industrial waste, viz. distillery and whey wastes was investigated by using an oily sludge isolate Pseudomonas aeruginosa strain BS2. In synthetic medium separately supplemented with glucose and hexadecane as water-soluble and -insoluble carbon sources, respectively, strain BS2 reduced the surface tension of the fermentation broth from 57 to 27 mN/m. The culture produced biosurfactant during the stationary growth phase and its yield was 0.97 g/l. The culture utilized distillery and whey wastes for its growth, as maximum cell counts reached to 54 × 10⁸ and 64 × 10⁹ c.f.u./ml from an initial inoculum size of 1 × 0⁵ c.f.u./ml, respectively, within 48 h of incubation and in these wastes the yields of biosurfactant obtained were 0.91 and 0.92 g/l, respectively. In synthetic medium, distillery and whey wastes, strain BS2 produced a crystalline biosurfactant which belonged to the category of secondary metabolites and its maximum production occurred after the onset of nitrogen-limiting conditions. After recovering biosurfactant from the fermented waste, the chemical oxygen demand (COD) of distillery and whey wastes was significantly reduced by 81 and 87%, respectively. Total acids, nitrogen and phosphate levels in distillery waste were reduced by 90, 92 and 92%, respectively, while in case of whey waste the concentration of these nutrients was reduced by 88, 95 and 93%, respectively. The isolated biosurfactant possessed potent surface active properties, as it effectively reduced the surface tension of water from 72 to 27 mN/m and formed 100% stable emulsions of a variety of water-insoluble compounds such as hydrocarbons, viz. hexadecane, crude oil, kerosene and oily sludge and pesticides, viz. dichlorodiphenyltrichloroethane (DDT) and benzene hexachloride (BHC). The effectiveness of biosurfactant was also evident from its low critical micellar concentration (CMC) which was 0.028 mg/ml.     

Electrical energy sources for organic synthesis on the early earth

In 1959, Miller and Urey (Science 130, 245) published their classic compilation of energy sources for indigenous prebiotic organic synthesis on the early Earth. Much contemporary origins of life research continues to employ their original estimates for terrestrial energy dissipation by lightning and coronal discharges, 2 × 10¹⁹ J yr^–1 and 6 × 10¹⁹ J yr^–1, respectively. However, more recent work in terrestrial lightning and point discharge research suggests that these values are overestimates by factors of about 20 and 120, respectively. Calculated concentrations of amino acids (or other prebiotic organic products) in the early terrestrial oceans due to electrical discharge sources may therefore have been equally overestimated. A review of efficiencies for those experiments that provide good analogues to naturally-occurring lightning and coronal discharges suggests that lightning energy yields for organic synthesis (nmole J^–1) are about one order of magnitude higher than those for coronal discharge. Therefore organic production by lightning may be expected to have dominated that due to coronae on early Earth. Limited data available for production of nitric oxide in clouds suggests that coronal emission within clouds, a source of energy heretofore too uncertain to be included in the total coronal energy inventory, is insufficient to change this conclusion. Our recommended valves for lightning and coronal discharge dissipation rates on the early Earth are, respectively, 1 × 10¹⁸ J yr^–1 and 5 × 10¹⁷ J yr^–1.     

Energy cost and energy sources in karate

Energy costs and energy sources in karate (wado style) were studied in eight male practitioners (age 23.8 years, mass. 72.3 kg, maximal oxygen consumption (VO_2max) 36.8 ml · min^–1 · kg^–1) performing six katas (formal, organized movement sequences) of increasing duration (from approximately. 10 s to approximately 80 s). Oxygen consumption (VO₂) was determined during pre-exercise rest, the exercise period and the first 270 s of recovery in five consecutive expired gas collections. A blood sample for lactate (la^–) analysis was taken 5 min after the end of exercise. The overall amount of O₂ consumed during the exercise and in the following recovery increased linearly with the duration of exercise (t) from approximately 1.51 (for t equal to 10.5 s (SD 1.6)) to approximately 5.81, for t equal to 81.5 s (SD 1.0). The energy release from la^– production (VO_21a ^–) calculated assuming that an increase of 1 mmol · l^–1 la^– corresponded to a VO₂ of 3 mlO₂ · kg^–1 was negligible for t equal to or less than 20 s and increased to 17.3 ml · kg^–1 (la^– = 5.8 mmol · l^–1 above resting values) for t equal approximately to 80 s. The overall energy requirement (VO_2eq) as given by the sum of VO₂ and VO_2la ^– was described by VO_2eq = 0.87 + 0.071 · t (n = 64; r ² = 0.91), where VO_2eq is in litres and t in seconds. This equation shows that the metabolic power (VO_2eq · t ^–1) for this karate style is very high: from approximately 9.51 · min^–1 for t equal to 10 s to approximately 4.91 · min^–1 for t equal to 80 s, i.e. from 3.5 to 1.8 times the subjects' VO_2max. The fraction of VO_2eq derived from the amount of O₂ consumed during the exercise increased from 11% for t equal to 10 s to 41 % for t equal to 80 s whereas VO_21a ^– was negligible far t equal to or less than 20 s and increased to 13 % o for t equal to 80 s. The remaining fraction (from 90% for t equal to 10 s to 46% for t equal to 80 s), corresponding to the amount of O₂ consumed in the recovery after exercise, is derived from anaerobic alactic sources, i.e. from net splitting of high energy phosphates during the exercise.     

Alternatives to arginine as energy sources for the non-fermentative Mycoplasma gallinarum

Abstract In contrast to previously studied non-fermentative arginine-hydrolysing (F-/A+) Mycoplasma species, M. gallinarum cells suspended in salts solution oxidised ethanol and L-lactic, pyruvic and 2-oxobutyric acids. The organic acids were additionally shown effectively to replace arginine as energy sources in growth media. However, their presence did not inhibit arginine hydrolysis, nor did arginine inhibit organic acid catabolism. The ability to oxidase organic acids is a potentially useful diagnostic character enabling sub-division of the F-/A+ Mycoplasma species. M. gallinarum also differed from previously studied F-/A+ mycoplasmas in possessing relatively high NADH oxidase activity and producing H₂O₂ as only a minor product of NADH oxidation.     

Combining sources in stable isotope mixing models: alternative methods

Stable isotope mixing models are often used to quantify source contributions to a mixture. Examples include pollution source identification; trophic web studies; analysis of water sources for soils, plants; or water bodies, and many others. A common problem is having too many sources to allow a unique solution. We discuss two alternative procedures for addressing this problem. One option is a priori to combine sources with similar signatures so the number of sources is small enough to provide a unique solution. Aggregation should be considered only when isotopic signatures of clustered sources are not significantly different, and sources are related so the combined source group has some functional significance. For example, in a food web analysis, lumping several species within a trophic guild allows more interpretable results than lumping disparate food sources, even if they have similar isotopic signatures. One result of combining mixing model sources is increased uncertainty of the combined end-member isotopic signatures and consequently the source contribution estimates; this effect can be quantified using the IsoError model (). As an alternative to lumping sources before a mixing analysis, the IsoSource mixing model () can be used to find all feasible solutions of source contributions consistent with isotopic mass balance. While ranges of feasible contributions for each individual source can often be quite broad, contributions from functionally related groups of sources can be summed a posteriori, producing a range of solutions for the aggregate source that may be considerably narrower. A paleohuman dietary analysis example illustrates this method, which involves a terrestrial meat food source, a combination of three terrestrial plant foods, and a combination of three marine foods. In this case, a posteriori aggregation of sources allowed strong conclusions about temporal shifts in marine versus terrestrial diets that would not have otherwise been discerned.     

Comparison of alternative mesenchymal stem cell sources for cell banking and musculoskeletal advanced therapies

With the continuous discovery of new alternative sources containing mesenchymal stem cells (MSCs), regenerative medicine therapies may find tailored applications in the clinics. Although these cells have been demonstrated to express specific mesenchymal markers and are able to differentiate into mesenchymal lineages in ad hoc culture conditions, it is still critical to determine the yield and differentiation potential of these cells in comparative studies under the same standardized culture environment. Moreover, the opportunity to use MSCs from bone marrow (BM) of multiorgan donors for cell banking is of relevant importance. In the attempt to establish the relative potential of alternative MSCs sources, we analyzed and compared the yield and differentiation potential of human MSCs from adipose and BM tissues of cadaveric origins, and from fetal annexes (placenta and umbilical cord) after delivery using standardized isolation and culture protocols. BM contained a significantly higher amount of mononuclear cells (MNCs) compared to the other tissue sources. Nonetheless, a higher cell seeding density was needed for these cells to successfully isolate MSCs. The MNCs populations were highly heterogeneous and expressed variable MSCs markers with a large variation from donor to donor. After MSCs selection through tissue culture plastic adhesion, cells displayed a comparable proliferation capacity with distinct colony morphologies and were positive for a pool of typical MSCs markers. In vitro differentiation assays showed a higher osteogenic differentiation capacity of adipose tissue and BM MSCs, and a higher chondrogenic differentiation capacity of BM MSCs.     

Guayule and Russian dandelion as alternative sources of natural rubber

Natural rubber, obtained almost exclusively from the Para rubber tree (Hevea brasiliensis), is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic rubber alternatives. Several pressing motives lead to the search for alternative sources of natural rubber. These include increased evidence of allergenic reactions to Hevea rubber, the danger that the fungal pathogen Microcyclus ulei, causative agent of South American Leaf Blight (SALB), might spread to Southeast Asia, which would severely disrupt rubber production, potential shortages of supply due to increasing demand and changes in land use, and a general trend towards the replacement of petroleum-derived chemicals with renewables. Two plant species have received considerable attention as potential alternative sources of natural rubber: the Mexican shrub Guayule (Parthenium argentatum Gray) and the Russian dandelion (Taraxacum koksaghyz). This review will summarize the current production methods and applications of natural rubber (dry rubber and latex), the threats to the production of natural rubber from the rubber tree, and describe the current knowledge of the production of natural rubber from guayule and Russian dandelion.     

Effects of alternative carbon sources on biological transformation of nitrophenols

The removal of nitrophenols under denitrifying conditions was studied in bench-scale upflow anaerobic sludge blanket (UASB) reactors (R1, R2, R3 and R4) using three different carbon sources. Initially acetate was used as carbon source (substrate) in all the four reactors followed by glucose and methanol. Reactor R1 was kept as control and R2, R3, R4 were fed with 30 mg/l concentration of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP), respectively. Throughout the study the hydraulic retention time (HRT) and COD/NO₃ ^-–N ratio were kept as 24 h and 10, respectively. 2-Aminophenol (2-AP), 4-aminophenol (4-AP) and 2-amino,4-nitrophenol (2-A,4-NP) were found as the major intermediate metabolites of 2-NP, 4-NP and 2,4-DNP degradation, respectively. Methanol was found to be a better carbon source for 4-NP and 2,4-DNP degradation as compared to acetate and glucose, while 2-NP degradation was not influenced much by the change of substrate. Nitrate nitrogen removal was always more than 99%. COD removal efficiency of the nitrophenol fed reactors varied from 85.7% to 97.7%. The oxidation-reduction potential (ORP) inside the reactors dropped, up to –300 mv, with glucose as carbon source. As the reactors were switched over to methanol, ORP increased to –190 mv. The granular sludge developed inside the reactors was light brown in colour when acetate and glucose were used as substrate, which turned dark brown to black at the end of methanol run. Biomass yield in terms of volatile suspended solids was observed as 0.15, 0.089 and 0.14 g per gram of COD removal for acetate, glucose and methanol, respectively.