Efficient genetic analysis of fungal samples

We present a method for rapid genetic analysis of small amounts of fungal material. Sterile glass slides, sufficiently small to fit in a standard PCR tube, were placed on agar inside a Petri dish. After a few days, fungal cultures start to overgrow the glass slides. Glass slides with attached mycelium were harvested, analysed microscopically, and placed into a standard PCR tube. Conserved primers flanking the ITS regions of rDNA repeat were used in a direct PCR with the fungal material. Sequence data were generated to be included in phylogenetic analyses to investigate the relationships of the studied mycorrhizal fungi from orchids. The mycelium attached to glass slides was also used for an in situ hybridization experiment using fluorescent labelled oligonucleotides as probes. Fluorescent signal was found throughout the cytoplasm when a probe specific to a site in the nuclear small subunit rRNA is used.     

The use of UV light as a cross-linking agent for cells and tissue sections in in situ hybridization.

UV cross-linking is introduced as a novel method to stabilize tissue on microscopic slides and to immobilize target molecules in biological material for in situ hybridization. UV illumination dramatically improves the stability of tissue sections and isolated cells on slides coated with gelatin/poly-lysine. Even during prolonged high-stringency washes, specimens remain firmly attached to the support layer. At the same time, the signal intensity is increased significantly whereas background levels remain as low as without UV illumination. These results indicate that while target RNAs and other molecules in the biological material are covalently cross-linked with their nearest neighbor molecules, tissues nonetheless remain penetrable, and target molecules remain accessible. We expect that this simple and efficient technique will find widespread applications in in situ hybridization methodology.     

In situ hybridization of biotinylated DNA probes to cotton meiotic chromosomes

A modified procedure for in situ hybridization of biotinylated probes to meiotic chromosomes of cotton has been developed with high retention of squashed cells on slides, preservation of acid-fixed chromosome morphology, exceptionally low levels of background precipitate at nonspecific hybridization sites and improved photomicrographic recording. Salient features of the techniques include pretreatment of slides before squashing, cold storage of squash preparations, and use of interference filters for distinguishing precipitate from chromatin. A cloned 18S/28S ribosomal DNA fragment from soybean was biotinylated via nick-translation and hybridized to microsporocyte meiotic chromosomes of cotton (Gossypium hirsutum L. and G. hirsutum L. X G. barbadense L.). Enzymatically formed precipitate from streptavidin-bound peroxidase marked the in situ hybridization. In situ hybridization of biotinylated probes to cotton meiotic chromosomes adds the specificity and resoltion of in situ hybridization to the chromosomal and genomic perspectives provided by meiotic cytogenetic analyses. Molecular cytogenetic analyses of meiotic cells offer certain inherent analytical advantages over analyses of somatic cells, e.g., in terms of mapping, and for studying fundamental biological and genetic problems, particularly for organisms that are not amenable to somatic karyotypic analysis.     

Development of an automatic machine for in situ hybridization and immunohistochemistry.

An instrument for the automation of in situ hybridization and immunohistochemistry has been developed. This machine is capable of analyzing 20 microscope glass slides via all of the steps required for colorimetric in situ hybridization or immunohistochemistry. The slides are placed specimen-side down on a specialized Teflon slide-holder set in the reaction chamber of the machine. The system uses a unique type of capillary action between the slide and the holder. The holder has two small holes and is designed to apply, incubate and sequentially add and remove reagents from the slide surface. The system performs the complete processes of in situ hybridization and immunohistochemistry from dewaxing to colorization. Some applications were carried out using this instrument. Cultured cells infected with cytomegalovirus, adenovirus, or herpes simplex virus were hybridized with homologous biotinylated probes, and showed strong purple signals with alkaline phosphatase in the presence of nitroblue tetrazolium and 5-bromo-4-chloro-3-indolyl phosphate. Automatic in situ hybridization using other colorimetric detection systems (e.g., peroxidase-labeled probes/diaminobenzidine/H2O2) was also examined in cells infected with Chlamydia trachomatis and in paraffin-embedded hepatic tissue sections from patients with hepatitis. For conventional immunohistochemical staining, formalin-fixed and paraffin-embedded tissues were used. Glial fibrillary acidic protein and gamma-immunoglobulins were detected automatically in human brain white matter and tonsillar tissues, respectively, as peroxidase-based reddish signals. The intensity of staining was equal to that achieved by manual methods.     

Fabrication of DNA microarrays using unmodified oligonucleotide probes

Microarrays printed on glass slides are often constructed by covalently linking oligonucleotide probes to a derivatized surface. These procedures typically require relatively expensive amine- or thiol-modified oligonucleotide probes that add considerable expense to larger arrays. We describe a system by which unmodified oligonucleotide probes are bound to either nonderivatized or epoxy-silane-derivatized glass slides. Biotinylated PCR products are heat denatured, hybridized to the arrays, and detected using an enzymatic amplification system. Unmodified probes appear to detach from the slide surface at high pH (> 10.0), suggesting that hydrogen bonding plays a significant role in probe attachment. Regardless of surface preparation, high temperature (up to 65 degrees C) and low ionic strength (deionized water) do not disturb probe attachment; hence, the fabrication method described here is suitable for a wide range of hybridization stringencies and conditions. We illustrate kinetics of room temperature hybridizations for probes attached to nonderivatized slides, and we demonstrate that unmodified probes produce hybridization signals equal to amine-modified, covalently bound probes. Our method provides a cost-effective alternative to conventional attachment strategies that is particularly suitable for genotyping PCR products with nucleic acid microarrays.     

An efficient in situ hybridization protocol for multiple tissue sections and probes on miniaturized slides

To facilitate detection of gene activity in tissue sections we combined common protocols of in situ hybridization on tissue sections (TSISH) with the technique of whole-mount in situ hybridization (WMISH). Miniature glass slides for mounting tissue sections were cut from regular microscope slides and handled for in situ hybridization in laboratory-made 2-ml containers (baskets) similar to those originally used for WMISH on Drosophila embryos. A salient point of the method is the use of airtight reaction vessels placed in a dry thermostat for critical hybridization steps as this facilitates reproducible and stringent hybridization conditions which are difficult to achieve on tissue sections otherwise. The practicability of the method is illustrated on consecutive serial frozen sections of murine neonatal cerebellum hybridized for math1 and neuroD, two developmentally regulated genes with distinct expression patterns. For both genes excellent spatial resolution and a highly dynamic range of signal intensity was obtained. The approach enables simple processing of multiple probes, allows the efficient and economic use of small tissue samples and is amenable to automation.     

Nonradioactive in Situ Hybridization with Digoxigenin Labeled DNA Probes

Nonradioactive in situ hybridization techniques are becoming increasingly important tools for rapid analysis of the topological organization of DNA and RNA sequences within cells. Prerequisite for further advances with these techniques are multiple labeling and detection systems for different probes. Here we summarize our results with a recently developed labeling and detection system. The DNA probe for in situ hybridization is modified with digoxigenin-labeled deoxyuridine-triphosphate. Digoxigenin is linked to dUTP via an 11-atom linear spacer (Dig-[11]-dUTP). Labeled DNA probes were hybridized in situ to chromosome preparations. The hybridization signal was detected using digoxigenin-specific antibodies covalently coupled to enzyme markers (alkaline phosphatase or peroxidase) or to fluorescent dyes. Color reactions catalyzed by the enzymes resulted in precipitates located on the chromosomes at the site of probe hybridization. This was verified by hybridizing DNA probes of known chromosomal origin. The signals were analyzed by bright field, reflection contrast and fluorescence microscopy. The results indicate that the new technique gives strong signals and can also be used in combination with other systems (e.g., biotin) to detect differently labeled DNA probes on the same metaphase plate.     

Single-step multicolor fluorescence In situ hybridization using semiconductor quantum dot-DNA conjugates

We report a rapid method for the direct multicolor imaging of multiple subnuclear genetic sequences using novel quantum dot-based fluorescence in situ hybridization (FISH) probes (QD-FISH). Short DNA oligonucleotides were attached on QDs and used in a single hybridization/detection step of target sites in situ. QD-FISH probes penetrate both intact interphase nuclei and metaphase chromosomes and showed good targeting of dense chromatin domains with minimal steric hindrances. We further demonstrated that QD's broad absorption spectra allowed different colored probes specific for distinct subnuclear genetic sequences to be simultaneously excited with a single excitation wavelength and imaged free of chromatic aberrations in a single exposure. Thus, these results demonstrate that QD-FISH probes are very effective in multicolor FISH applications. This work also documents new possibilities of using QD-FISH probes detection down to the single molecule level.     

Quantitation of in situ hybridization of ribosomal ribonucleic acids to human diploid cells

The hybridization of 5S and 28S ribosomal RNAs to human fibroblast and leukocyte cells was used as a model system to quantitate the technique of in situ hybridization for human diploid cell types. Quantitation consisted of counting (scoring) the number of grains formed over both interphase nuclei and metaphase chromosomes on slides after various hybridization procedures. The average number of grains/nucleus per slide was then used to determine hybridization percentages. As with nitrocellulose filter hybridizations the kinetics of in situ hybridizations can be fit with a single first-order rate constant. However, the in situ hybridization rate was approximately 10 times slower than the corresponding filter hybridization rate. The efficiency of in situ hybridization was found to range between 5 and 15% for both leukocyte and fibroblast cell types and for both metaphase and interphase nuclei. Determination of the parameters of the in situ hybridization reaction of ribosomal RNAs to diploid chromosomes define the experimental conditions needed for the localization of single copy genes to diploid chromosomes.     

High resolution multicolor fluorescence in situ hybridization using cyanine and fluorescein dyes: Rapid chromosome identification by directly fluorescently labeled alphoid DNA probes

We tested DNA probes directly labeled by fluorescently labeled nucleotides (Cy3-dCTP, Cy5-dCTP, FluorX-dCTP) for high resolution uni- and multicolor detection of human chromosomes and analysis of centromeric DNA organization by in situ hybridization. Alpha-satellite DNA probes specific to chromosomes 1, 2, 3, 4 + 9, 5 + 19, 6, 7, 8, 10, 11, 13 + 21, 14 + 22, 15, 16, 17, 18, 20, 22, X and Y were suitable for the accurate identification of human chromosomes in metaphase and interphase cells. Cy3-labeled probes had several advantages: (1) a high level of fluorescence (5–10 times more compared with fluorescein-labeled probes); (2) a low level of fluorescence in solution, allowing the detection of target chromosomes in situ during hybridization without the washing of slides; and (3) high resistance to photobleaching during prolonged (1-2 h) exposure to strong light, thus allowing the use of a high energy mercury lamp or a long integration time during image acquisition in digital imaging microscopy for the determination of weak signals. For di- and multicolor fluorescence in situ hybridization (FISH), we successfully used different combinations of directly fluorophorated probes with preservation of images by conventional microscopy or by digital imaging microscopy. FluorX and Cy3 dyes allowed the use of cosmid probes for mapping in a one-step hybridization experiment. Cyanine-labeled fluorophorated DNA probes offer additional possibilities for rapid chromosome detection during a simple 15-min FISH procedure, and can be recommended for basic research and clinical studies, utilizing FISH.     

Adaptation of a non-radioactive in situ hybridization method to electron microscopy: detection of tenascin mRNAs in mouse cerebellum with digoxigenin-labelled probes and gold-labelled antibodies

In this study we describe a method for the detection of mRNAs at the ultrastructural level using a non-radioactive in situ hybridization method based on digoxigenin-labelled cRNA probes and gold-labelled digoxigenin-specific antibodies. We applied this protocol to an analysis of the expression of the extracellular matrix protein tenascin in the developing cerebellar cortex of the mouse. To gain an impression of the sensitivity attainable with digoxigenin-labelled probes, we first established at the light microscopic level that the hybridization signal obtained with the non-radioactive probe is as sensitive as that obtained with a ³⁵S-labelled probe. The non-radioactive hybridization protocol was then combined with electron microscopic post-embedding and immunogold detection techniques. Tenascinspecific, digoxigenin-labelled cRNA probes were hybridized to ultrathin sections of Lowicryl K4M-embedded tissue and the probe/target mRNA hybrids were detected using gold-labelled antibodies to digoxigenin. In agreement with the observations from in situ hybridization at the light microscopic level, specific labelling was observed in Golgi epithelial cells in the region of the Purkinje cell layer and cells in the internal granular layer, which could be identified as astrocytes by ultrastructural criteria. Labelling was detectable in association with free ribosomes and ribosomes of the rough endoplasmic reticulum. In addition, focal hybridization signals were occasionally found in the nucleus. No signal was observed in Golgi epithelial cells or astrocytes using sense or in any other cerebellar cell type using either sense or anti-sense probes. The described in situ hybridization technique uses ultrastructural criteria to associate the presence of a given mRNA species with a particular cell type. Additionally, it provides information about the target mRNA's subcellular distribution, thus offering the possibility to study intracellular transport of particular mRNAs.     

Use of non-radioactive DNA probes for the characterization of adult T-cell leukemia cells

DNA fragments were labeled with dinitrophenyl (DNP) residues by the reaction with 2,4-dinitrobenzaldehyde in alkaline condition and the labeled DNA was used as a probe for non-radioactive in situ hybridization. DNP-labeled DNA probes for T cell receptor beta chain, c-myc and HTLV-1 were hybridized in situ to mRNA on cell specimens fixed with Carnoy's fixative. DNA-mRNA hybrids were detected immunohistochemically using anti-DNP antibodies. Cytoplasms of adult T cell leukemia cells were stained with varied intensity when these probes were used. More than 70% of cells were positively stained with T cell receptor probe. However, less than 30% of cells were stained with c-myc and HTLV-1 probes. The present study indicates that non-radioactive in situ hybridization can be used for the characterization and classification of leukemia.     

Fast-in Situ hybridization and immunoenzymatic color pigment detection of mouse bone marrow micronucleus

The development of a whole mouse genomic DNA probe coupled to color pigment painting detection methodology can accurately verify mouse micronuclei induced by chemicals or drugs leading to a lower probability of potential artifacts. Using color pigment painting detection of probes in conjunction with Wright's Giemsa counterstain instead of the current fluorescence detection technology ensures low cost, high resolution permanent documentation of slides for a particular test compound. The permanent color pigment-detected micronuclei and adjoining counterstain allows slides to be stored for future analysis without enhancing the signal or adding antifading agents that are associated with fluorescence detection. Combining innovative technology such as fast-in situ hybridization of DNA probes with immunoenzymatic color pigment detection provides rapid verification of true micronuclei (DNA containing) within 2-3 hr.     

Highly fluorochrome labeled gene probes for quantitative tracing of RNA in individual cells by in situ hybridization.

A new method is presented for preparing highly fluorochrome labeled gene probes suitable for in situ hybridization. For this purpose fluorochromes were attached to a synthetic polypeptide, which was then coupled covalently to various gene probes. The advantage of the reported method is its high labeling efficiency and the easy coupling procedure. The method allows rapid and quantitative detection of homologous RNA at the single cell level. Optimal conditions for the hybridization of fluorochrome-labeled gene probes were established microfluorimetrically, and the specificity and sensitivity of the method were tested. Quantitation of the RNA with a fluorochrome-labeled gene probe in situ in individual cells allows determination of the degree of gene activation in individual cells and may thus provide a new tool for investigation of normal and malignant cells with respect to activation of genes controlling differentiation and proliferation.     

Evaluation of thin films of agarose on glass for hybridization of DNA to identify plant pathogens with microarray technology

Agarose-coated glass slides, after activation, were spotted with amine-modified oligonucleotide probes using a manual eight-pin arraying device. Two probes, designed to identify two common greenhouse fungal plant pathogens, Didymella bryoniae and Botrytis cinerea, were hybridized with polymerase chain reaction (PCR)-amplified fluorescently labeled DNA extracted from pure culture and from diseased plant tissue. The probes easily distinguished these pathogens from each other without cross reaction. Thickness of the agarose layer and length of the sample DNA were important factors affecting hybridization efficiency of immobilized probe to PCR product. These factors did not affect hybridization with short complementary oligonucleotide. Probes fixed on agarose-coated slides could differentiate samples as readily as probes on nylon but with potentially higher spot density and gave much better signal than probes on silylated slides. The use of plain glass slides, agarose, and a manual arrayer makes this technique useful for developing specialized and inexpensive DNA microarrays on a solid rigid substrate.