Biological Filtration Limits Carbon Availability and Affects Downstream Biofilm Formation and Community Structure

Carbon removal strategies have gained popularity in the mitigation of biofouling in water reuse processes, but current biofilm-monitoring practices based on organic-carbon concentrations may not provide an accurate representation of the in situ biofilm problem. This study evaluated a submerged microtiter plate assay for direct and rapid monitoring of biofilm formation by subjecting the plates to a continuous flow of either secondary effluent (SE) or biofilter-treated secondary effluent (BF). This method was very robust, based on a high correlation (R² = 0.92) between the biomass (given by the A₆₀₀ in the microtiter plate assay) and the biovolume (determined from independent biofilms developed on glass slides under identical conditions) measurements, and revealed that the biomasses in BF biofilms were consistently lower than those in SE biofilms. The influence of the organic-carbon content on the biofilm community composition and succession was further evaluated using molecular tools. Terminal restriction fragment length polymorphism analysis of 16S rRNA genes revealed a group of pioneer colonizers, possibly represented by Sphingomonadaceae and Caulobacter organisms, to be common in both SE and BF biofilms. However, differences in organic-carbon availabilities in the two water samples eventually led to the selection of distinct biofilm communities. Alphaproteobacterial populations were confirmed by fluorescence in situ hybridization to be enriched in SE biofilms, while Betaproteobacteria were dominant in BF biofilms. Cloning analyses further demonstrated that microorganisms adapted for survival under low-substrate conditions (e.g., Aquabacterium, Caulobacter, and Legionella) were preferentially selected in the BF biofilm, suggesting that carbon limitation strategies may not achieve adequate biofouling control in the long run.     

Microtiter plate assay for assessment of Listeria monocytogenes biofilm formation

Listeria monocytogenes has the ability to form biofilms on food-processing surfaces, potentially leading to food product contamination. The objective of this research was to standardize a polyvinyl chloride (PVC) microtiter plate assay to compare the ability of L. monocytogenes strains to form biofilms. A total of 31 coded L. monocytogenes strains were grown in defined medium (modified Welshimer's broth) at 32 degrees C for 20 and 40 h in PVC microtiter plate wells. Biofilm formation was indirectly assessed by staining with 1% crystal violet and measuring crystal violet absorbance, using destaining solution. Cellular growth rates and final cell densities did not correlate with biofilm formation, indicating that differences in biofilm formation under the same environmental conditions were not due to growth rate differences. The mean biofilm production of lineage I strains was significantly greater than that observed for lineage II and lineage III strains. The results from the standardized microtiter plate biofilm assay were also compared to biofilm formation on PVC and stainless steel as assayed by quantitative epifluorescence microscopy. Results showed similar trends for the microscopic and microtiter plate assays, indicating that the PVC microtiter plate assay can be used as a rapid, simple method to screen for differences in biofilm production between strains or growth conditions prior to performing labor-intensive microscopic analyses.     

Microtiter Plate Assay for Assessment of Listeria monocytogenes Biofilm Formation

Listeria monocytogenes has the ability to form biofilms on food-processing surfaces, potentially leading to food product contamination. The objective of this research was to standardize a polyvinyl chloride (PVC) microtiter plate assay to compare the ability of L. monocytogenes strains to form biofilms. A total of 31 coded L. monocytogenes strains were grown in defined medium (modified Welshimer's broth) at 32°C for 20 and 40 h in PVC microtiter plate wells. Biofilm formation was indirectly assessed by staining with 1% crystal violet and measuring crystal violet absorbance, using destaining solution. Cellular growth rates and final cell densities did not correlate with biofilm formation, indicating that differences in biofilm formation under the same environmental conditions were not due to growth rate differences. The mean biofilm production of lineage I strains was significantly greater than that observed for lineage II and lineage III strains. The results from the standardized microtiter plate biofilm assay were also compared to biofilm formation on PVC and stainless steel as assayed by quantitative epifluorescence microscopy. Results showed similar trends for the microscopic and microtiter plate assays, indicating that the PVC microtiter plate assay can be used as a rapid, simple method to screen for differences in biofilm production between strains or growth conditions prior to performing labor-intensive microscopic analyses.     

Assessment of biofilm cell removal and killing and biocide efficacy using the microtiter plate test

Biofilm formation on surfaces has serious economic and environmental implications. Growth of biofilm within a water distribution system can lead to problems such as biocorrosion and biofouling accumulation. To prevent and control these occurrences, it is necessary to use suitable biocides to remove the biofilm and kill biofilm cells. In this study, the genera Actinobacillus, Branhamella, Bacillus, Micrococcus and Acinetobacter were isolated from biofilms formed on brass coupons exposed to a cooling water system. It was shown by the microtiter plate test that a mixed culture of the isolates and a single culture of Acinetobacter sp(2) produced high levels of biofilm formation. A microwell plate technique was applied for assessment of the ability of various biocides to remove and kill mixed-culture biofilm cells and Acinetobacter sp(2), the latter as a single-species biofilm with a high rate of biofilm production. The results showed that the mixed-culture biofilm cells had more resistance to removal and killing by some biocides, such as hydrogen peroxide and sulfathiazole, than the single-species biofilm cells (Acinetobacter sp(2)). Oxidising biocides, such as sodium hypochlorite and hydrogen peroxide, demonstrated a higher potential for biofilm removal and killing compared with non-oxidising biocides (sulfathiazole and glutaraldehyde).     

The ability of an antimicrobial agent to penetrate a biofilm is not correlated with its killing or removal efficiency

The penetration ability of 12 antimicrobial agents, including antibiotics and biocides, was determined against biofilms of B. cereus and P. fluorescens using a colony biofilm assay. The surfactants benzalkonium chloride (BAC) and cetyltrimethyl ammonium bromide (CTAB), and the antibiotics ciprofloxacin and streptomycin were of interest due to their distinct activities. Erythromycin and CTAB were retarded by the presence of biofilms, whereas ciprofloxacin and BAC were not. The removal and killing efficacies of these four agents was additionally evaluated against biofilms formed in microtiter plates. The most efficient biocide was CTAB for both bacterial biofilms. Ciprofloxacin was the best antibiotic although none of the selected antimicrobial agents led to total biofilm removal and/or killing. Comparative analysis of the results obtained with colony biofilms and microtiter plate biofilms show that although extracellular polymeric substances and the biofilm structure are considered a determining factor in biofilm resistance, the ability of an antimicrobial agent to penetrate a biofilm is not correlated with its killing or removal efficiency. Also, the results reinforce the role of an appropriate antimicrobial selection as a key step in the design of disinfection processes for biofilm control.     

Microtiter Dish Biofilm Formation Assay

Biofilms are communities of microbes attached to surfaces, which can be found in medical, industrial and natural settings. In fact, life in a biofilm probably represents the predominate mode of growth for microbes in most environments. Mature biofilms have a few distinct characteristics. Biofilm microbes are typically surrounded by an extracellular matrix that provides structure and protection to the community. Microbes growing in a biofilm also have a characteristic architecture generally comprised of macrocolonies (containing thousands of cells) surrounded by fluid-filled channels. Biofilm-grown microbes are also notorious for their resistance to a range of antimicrobial agents including clinically relevant antibiotics.The microtiter dish assay is an important tool for the study of the early stages in biofilm formation, and has been applied primarily for the study of bacterial biofilms, although this assay has also been used to study fungal biofilm formation. Because this assay uses static, batch-growth conditions, it does not allow for the formation of the mature biofilms typically associated with flow cell systems. However, the assay has been effective at identifying many factors required for initiation of biofilm formation (i.e, flagella, pili, adhesins, enzymes involved in cyclic-di-GMP binding and metabolism) and well as genes involved in extracellular polysaccharide production. Furthermore, published work indicates that biofilms grown in microtiter dishes do develop some properties of mature biofilms, such a antibiotic tolerance and resistance to immune system effectors.This simple microtiter dish assay allows for the formation of a biofilm on the wall and/or bottom of a microtiter dish. The high throughput nature of the assay makes it useful for genetic screens, as well as testing biofilm formation by multiple strains under various growth conditions. Variants of this assay have been used to assess early biofilm formation for a wide variety of microbes, including but not limited to, pseudomonads, Vibrio cholerae, Escherichia coli, staphylocci, enterococci, mycobacteria and fungi.In the protocol described here, we will focus on the use of this assay to study biofilm formation by the model organism Pseudomonas aeruginosa. In this assay, the extent of biofilm formation is measured using the dye crystal violet (CV). However, a number of other colorimetric and metabolic stains have been reported for the quantification of biofilm formation using the microtiter plate assay. The ease, low cost and flexibility of the microtiter plate assay has made it a critical tool for the study of biofilms.Download video file.^{(24M, mov)}     

Isolation and characterization of marine biofilm forming bacteria from a ship’s hull

Background

Diverse aquatic microorganisms are capable of colonizing living and non-living surfaces leading to the formation of biofilms. Commonly visualized as a slimy layer, these biofilms are filled with hundreds of other microorganisms compared to free living planktonic cells. Microbial surface colonization and surface-associated metabolic activities also exert several macroscale deleterious effects, including biofouling, biocorrosion and the persistence and transmission of harmful or pathogenic microorganisms and virulence determinants. The present study deals with the isolation and screening of marine bacteria for biofilm formation. The screened isolates were characterized and identified as Pychrobacter celer, Pychrobacter alimentarius and Kocuria rhizophila by 16S rRNA sequencing.

Methods

Biofilm forming bacteria were isolated by spread plate technique and subjected to screening by microtiter plate assay. The potent biofilm formers were identified by molecular characterization using 16S rRNA gene sequencing.

Results

Twelve bacterial isolates were obtained by pour plate technique and subjected to biofilm assay. Among the 12 isolates three isolates which showed maximum biofilm formation were subjected to molecular characterizationby 16S rRNA gene sequencing method. The isolates were identified as Pychrobacter celer, Pychrobacter alimentarius and Kocuria rhizophila. The EPS produced by the three biofilm forming bacteria was extracted and the protein and carbohydrate content determined.

Conclusion

Among the isolates screened, isolate 8 (Kocuria rhizophila) produced maximum protein and carbohydrate which was also in accordance with the results of microtiter plate assay.

     

Esp-independent biofilm formation by Enterococcus faecalis

Enterococcus faecalis is a gram-positive opportunistic pathogen known to form biofilms in vitro. In addition, this organism is often isolated from biofilms on the surfaces of various indwelling medical devices. However, the molecular mechanisms regulating biofilm formation in these clinical isolates are largely unknown. Recent work has suggested that a specific cell surface protein (Esp) of E. faecalis is critical for biofilm formation by this organism. However, in the same study, esp-deficient strains of E. faecalis were found to be capable of biofilm formation. To test the hypothesis that Esp is dispensable for biofilm formation by E. faecalis, we used microtiter plate assays and a chemostat-based biofilm fermentor assay to examine biofilm formation by genetically well-defined, non-Esp-expressing strains. Our results demonstrate that in vitro biofilm formation occurs, not only in the absence of esp, but also in the absence of the entire pathogenicity island that harbors the esp coding sequence. Using scanning electron microscopy to evaluate biofilms of E. faecalis OG1RF grown in the fermentor system, biofilm development was observed to progress through multiple stages, including attachment of individual cells to the substratum, microcolony formation, and maturation into complex multilayered structures apparently containing water channels. Microtiter plate biofilm analyses indicated that biofilm formation or maintenance was modulated by environmental conditions. Furthermore, our results demonstrate that expression of a secreted metalloprotease, GelE, enhances biofilm formation by E. faecalis. In summary, E. faecalis forms complex biofilms by a process that is sensitive to environmental conditions and does not require the Esp surface protein.     

The correlation between biofilm biopolymer composition and membrane fouling in submerged membrane bioreactors

Biofouling, the combined effect of microorganism and biopolymer accumulation, significantly reduces the process efficiency of membrane bioreactors (MBRs). Here, four biofilm components, alpha-polysaccharides, beta-polysaccharides, proteins and microorganisms, were quantified in MBRs. The biomass of each component was positively correlated with the transmembrane pressure increase in MBRs. Proteins were the most abundant biopolymer in biofilms and showed the fastest rate of increase. The spatial distribution and co-localization analysis of the biofouling components indicated at least 60% of the extracellular polysaccharide (EPS) components were associated with the microbial cells when the transmembrane pressure (TMP) entered the jump phase, suggesting that the EPS components were either secreted by the biofilm cells or that the deposition of these components facilitated biofilm formation. It is suggested that biofilm formation and the accumulation of EPS are intrinsically coupled, resulting in biofouling and loss of system performance. Therefore, strategies that control biofilm formation on membranes may result in a significant improvement of MBR performance.     

Cryptococcus neoformans biofilm formation depends on surface support and carbon source and reduces fungal cell susceptibility to heat, cold, and UV light

The fungus Cryptococcus neoformans possesses a polysaccharide capsule and can form biofilms on medical devices. We describe the characteristics of C. neoformans biofilm development using a microtiter plate model, microscopic examinations, and a colorimetric 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium-hydroxide (XTT) reduction assay to observe the metabolic activity of cryptococci within a biofilm. A strong correlation between XTT and CFU assays was demonstrated. Chemical analysis of the exopolymeric material revealed sugar composition consisting predominantly of xylose, mannose, and glucose, indicating the presence of other polysaccharides in addition to glucurunoxylomannan. Biofilm formation was affected by surface support differences, conditioning films on the surface, characteristics of the medium, and properties of the microbial cell. A specific antibody to the capsular polysaccharide of this fungus was used to stain the extracellular polysaccharide matrix of the fungal biofilms using light and confocal microscopy. Additionally, the susceptibility of C. neoformans biofilms and planktonic cells to environmental stress was investigated using XTT reduction and CFU assays. Biofilms were less susceptible to heat, cold, and UV light exposition than their planktonic counterparts. Our findings demonstrate that fungal biofilm formation is dependent on support surface characteristics and that growth in the biofilm state makes fungal cells less susceptible to potential environmental stresses.     

环境因子对水霉菌生物膜形成的影响

【目的】体外构建水霉菌(Saprolegnia)生物膜(Biofilm,BF),研究环境因子对其生物膜形成的影响。【方法】采用改良的微孔板法研究静置培养条件下寄生水霉(Saprolegnia parasitica)ATCC200013在96孔酶标板上的成膜情况,CCK-8法(Cell Counting Kit-8)定量检测生物膜中水霉菌的活力。【结果】水霉菌的生物膜的OD450值在培养24 h达到峰值,48 h后趋于稳定。随着初始孢子浓度升高,水霉菌生物膜OD450值升高,差异显著(P0.05)。20-25°C生物膜形成量最多,OD450值显著高于其他温度组(P0.05)。在起始pH值为4-11的沙氏葡萄糖液体培养基中,水霉菌均能形成生物膜。在培养基中加入0.12 mmol/L以上CaCl2,能促进生物膜形成;添加0.03-2.00 mmol/L MgCl2,水霉菌生物膜形成量与未添加MgCl2对照组无显著性差异;Cu2+对水霉菌生物膜的形成有显著影响,0.5 mmol/L以上添加处理几乎不形成生物膜;NaCl能明显抑制水霉菌生物膜的形成,当NaCl质量分数低于0.12%时,对生物膜形成的影响较小(P0.05)。水霉菌在鲫皮和肌肉提取液包被后生物膜形成量与对照组相比无显著性差异,而鲫表皮黏液、鳃黏液包被后生物膜的形成量明显减少。【结论】研究首次采用微孔板法体外构建水霉菌生物膜,发现其生物膜的形成与多种环境因素有着密切的关系。这为了解水霉菌生物膜的形成规律提供了一定参考,为水霉菌生物膜的进一步研究奠定了基础。     

Biofilm production and presence of ica and bap genes in Staphylococcus aureus strains isolated from cows with mastitis in the eastern Poland

The aim of the study was phenotypic and genotypic analysis of 132 S. aureus strains isolated from mastitis in eastern Poland in respect to their biofilm formation ability. The analysis of the size polymorphism of fragment X in the gene encoding protein A (spa) revealed high genetic differentiation of the analyzed group of isolates. The ability of biofilm formation by the isolates was tested using two phenotypic methods. The Congo Red plate assay was found to be irreproducible and very subjective. More objective results were obtained using the spectrophotometric, microtiter plate assay. Most of the isolates, namely 76/132 (57.6 %) were classified as biofilm producers depending on the value of absorbance in the microtiter plate test. All of the isolates tested were found to possess both icaA and icaD genes, while the bap gene was absent in all strains.     

Comparison of three assays for the quantification of Candida biomass in suspension and CDC reactor grown biofilms

A common assay to measure yeast metabolic activity in biofilms is based on the reduction of the tetrazolium salt XTT {2,3-bis (2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide} to a colored formazan. However, a recent report, also confirmed by our own findings about the shortcomings of the chromogenic XTT assay, has prompted us to investigate alternative methods for yeast biomass quantification. To this end, two fluorogenic assays using fluorescein diacetate (FDA) and SYTO 9 as well as the XTT assay were comparatively evaluated with regard to the linear range of Candida albicans and Candida parapsilosis cell number-response curves, precision and intra- and interspecies variability. Reading of fluorescence and absorbance was carried out in a multilabel microtiter plate reader. All three assays were adequate for the determination of planktonic yeast biomass, but the FDA and SYTO 9 assays present practical advantages. When applied to the quantification of yeast biofilm biomass obtained in the CDC biofilm reactor, the FDA assay proved superior.     

Cryptococcus neoformans Biofilm Formation Depends on Surface Support and Carbon Source and Reduces Fungal Cell Susceptibility to Heat, Cold, and UV Light

The fungus Cryptococcus neoformans possesses a polysaccharide capsule and can form biofilms on medical devices. We describe the characteristics of C. neoformans biofilm development using a microtiter plate model, microscopic examinations, and a colorimetric 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium-hydroxide (XTT) reduction assay to observe the metabolic activity of cryptococci within a biofilm. A strong correlation between XTT and CFU assays was demonstrated. Chemical analysis of the exopolymeric material revealed sugar composition consisting predominantly of xylose, mannose, and glucose, indicating the presence of other polysaccharides in addition to glucurunoxylomannan. Biofilm formation was affected by surface support differences, conditioning films on the surface, characteristics of the medium, and properties of the microbial cell. A specific antibody to the capsular polysaccharide of this fungus was used to stain the extracellular polysaccharide matrix of the fungal biofilms using light and confocal microscopy. Additionally, the susceptibility of C. neoformans biofilms and planktonic cells to environmental stress was investigated using XTT reduction and CFU assays. Biofilms were less susceptible to heat, cold, and UV light exposition than their planktonic counterparts. Our findings demonstrate that fungal biofilm formation is dependent on support surface characteristics and that growth in the biofilm state makes fungal cells less susceptible to potential environmental stresses.     

Dynamic surface deformation of silicone elastomers for management of marine biofouling: laboratory and field studies using pneumatic actuation

Many strategies have been developed to improve the fouling release (FR) performance of silicone coatings. However, biofilms inevitably build on these surfaces over time. Previous studies have shown that intentional deformation of silicone elastomers can be employed to detach biofouling species. In this study, inspired by the methods used in soft-robotic systems, controlled deformation of silicone elastomers via pneumatic actuation was employed to detach adherent biofilms. Using programmed surface deformation, it was possible to release > 90% of biofilm from surfaces in both laboratory and field environments. A higher substratum strain was required to remove biofilms accumulated in the field environment as compared with laboratory-grown biofilms. Further, the study indicated that substratum modulus influences the strain needed to de-bond biofilms. Surface deformation-based approaches have potential for use in the management of biofouling in a number of technological areas, including in niche applications where pneumatic actuation of surface deformation is feasible.     

Biofilm formation and interactions of bacterial strains found in wastewater treatment systems

Biofilm formation and adherence properties of 13 bacterial strains commonly found in wastewater treatment systems were studied in pure and mixed cultures using a crystal violet microtiter plate assay. Four different culture media were used, wastewater, acetate medium, glucose medium and diluted nutrient broth. The medium composition strongly affected biofilm formation. All strains were able to form pure culture biofilms within 24 h in at least one of the tested culture media and three strains were able to form biofilm in all four culture media, namely Acinetobacter calcoaceticus ATCC 23055, Comamonas denitrificans 123 and Pseudomonas aeruginosa MBL 0199. The adherence properties assessed were initial adherence, cell surface hydrophobicity, and production of amyloid fibers and extracellular polymeric substances. The growth of dual-strain biofilms showed that five organisms formed biofilm with all 13 strains while seven formed no or only weak biofilm when cocultured. In dual-strain cultures, strains with different properties were able to complement each other, giving synergistic effects. Strongest biofilm formation was observed when a mixture of all 13 bacteria were grown together. These results on attachment and biofilm formation can serve as a tool for the design of tailored systems for the degradation of municipal and industrial wastewater.     

Using enzymes to remove biofilms of bacterial isolates sampled in the food-industry

The aim of this study was to analyze the cleaning efficiency of polysaccharidases and proteolytic enzymes against biofilms of bacterial species found in food industry processing lines and to study enzyme effects on the composition of extracellular polymeric substances (EPS) and biofilm removal in a Clean-in-Place (CIP) procedure. The screening of 7 proteases and polysaccharidases for removal of biofilms of 16 bacterial species was first evaluated using a microtiter plate assay. The alkaline pH buffer removed more biofilm biomass as well as affecting a larger range of bacterial species. The two serine proteases and α-amylase were the most efficient enzymes. Proteolytic enzymes promoted biofilm removal of a larger range of bacterial species than polysaccharidases. Using three isolates derived from two bacterial species widely found in food processing lines (Pseudomonas fluorescens and the Bacillus cereus group), biofilms were developed on stainless steel slides and enzymatic solutions were used to remove the biofilms using CIP procedure. Serine proteases were more efficient in removing cells of Bacillus biofilms than polysaccharidases. However, polysaccharidases were more efficient in removing P. fluorescens biofilms than serine proteases. Solubilization of enzymes with a buffer containing surfactants, and dispersing and chelating agents enhanced the efficiency of polysaccharidases and proteases respectively in removing biofilms of Bacillus and P. fluorescens. A combination of enzymes targeting several components of EPS, surfactants, dispersing and chelating agents would be an efficient alternative to chemical cleaning agents.     

The stringent response genes relA and spoT are important for Escherichia coil biofilms under slow-growth conditions

In order to see whether the stringent response was involved in biofilm formation, Escherichia coli DS291 (MG1655), and its isogenic relA spoT derivative were grown for 48 h in a chemostat at dilution rates of 0.025 and 0.25 h(-1) under serine limitation. The absence of the stringent response genes relA and spoT had little effect on the planktonic cell concentrations. However, a significant (P < 0.001) reduction in biofilm cell density of the relA spoT mutants was seen at a doubling time of 40 h. At a doubling time of 4 h, differences in biofilm cell density were not significant. Scanning confocal laser microscopy demonstrated the cell densities of microcolonies in the relA spoT mutant to be lower than those in the wild type. Using a microtiter plate assay, we found biofilm formation in relA spoT mutants to be similarly reduced in minimal media but to be enhanced in rich media (Luria-Bertani broth). No significant differences in biofilm formation were observed between wild type and isogenic relA mutants under any growth conditions. Overall, these results suggest that both stringent response genes relA and spoT are important in nutrient-limited biofilms.     

一株吡啶降解菌Pseudomonas sp. ZX08的生物膜形成特性及影响因素

【背景】煤化工企业排放的废水中含有大量难降解、高毒性的有机污染物,采用以高效降解菌为基础的生物强化技术对其进行处理,是一种经济可行的策略;而促进高效降解菌在载体材料表面的生物膜形成,有助于提升生物膜法废水处理系统的效能。【目的】探究一株吡啶高效降解菌Pseudomonas sp. ZX08的生物膜形成过程和特性,识别不同的环境因子如温度、pH、Na~+、K~+、Ca~(2+)、Mg~(2+)等对其生物膜形成的影响规律,为实现人工调控其在实际废水处理系统中的成膜过程提供理论依据。【方法】采用改良的微孔板生物膜培养与定量方法,以单因子影响实验测定不同条件下菌株在12孔板内的生物膜形成量和浮游态细菌量;采用激光共聚焦显微镜(confocallaserscanning microscope,CLSM)观察和分析生物膜的结构特征。【结果】Pseudomonas sp. ZX08菌株具有良好的吡啶降解性能,且生物膜形成能力较强,CLSM观察到其在载体表面形成的生物膜可达40-50mm;生物膜外层的活细胞比例更高,分泌的胞外蛋白也更多。ZX08菌株的生物膜形成量具有明显的周期性变化特征,12 h、48 h的生物膜量是相对峰值。ZX08生物膜形成的最适温度是25°C,最适pH范围是7.0-9.0;较高浓度的NaCl (0.6 mol/L)和KCl (0.4 mol/L)均对ZX08的生物膜形成有显著的抑制作用;一定范围内(0-16 mmol/L) Ca~(2+)浓度的提高可以促进ZX08在12孔板底部固-液界面生物膜的形成,浓度更高时则显著抑制生物膜的形成;一定范围内(0-16 mmol/L) Mg~(2+)浓度的提高对ZX08生物膜形成有促进作用,但促进幅度不大。【结论】吡啶降解菌Pseudomonas sp. ZX08的生物膜形成能力较强,未来在实际废水处理系统中应用时需要综合考虑各种环境因子对其生物膜形成的影响。     

Differential Roles of Poly-N-Acetylglucosamine Surface Polysaccharide and Extracellular DNA in Staphylococcus aureus and Staphylococcus epidermidis Biofilms

Staphylococcus aureus and Staphylococcus epidermidis are major human pathogens of increasing importance due to the dissemination of antibiotic-resistant strains. Evidence suggests that the ability to form matrix-encased biofilms contributes to the pathogenesis of S. aureus and S. epidermidis. In this study, we investigated the functions of two staphylococcal biofilm matrix polymers: poly-N-acetylglucosamine surface polysaccharide (PNAG) and extracellular DNA (ecDNA). We measured the ability of a PNAG-degrading enzyme (dispersin B) and DNase I to inhibit biofilm formation, detach preformed biofilms, and sensitize biofilms to killing by the cationic detergent cetylpyridinium chloride (CPC) in a 96-well microtiter plate assay. When added to growth medium, both dispersin B and DNase I inhibited biofilm formation by both S. aureus and S. epidermidis. Dispersin B detached preformed S. epidermidis biofilms but not S. aureus biofilms, whereas DNase I detached S. aureus biofilms but not S. epidermidis biofilms. Similarly, dispersin B sensitized S. epidermidis biofilms to CPC killing, whereas DNase I sensitized S. aureus biofilms to CPC killing. We concluded that PNAG and ecDNA play fundamentally different structural roles in S. aureus and S. epidermidis biofilms.