Synthesis, structure and biological activities of cobalt(II) and zinc(II) coordination compounds with 2-benzimidazole derivatives

In this work we present the synthesis, structural and spectroscopic characterisation of a series of cobalt(II) and zinc(II) coordination compounds with benzimidazole (bz) and its 2-benzimidazole derivatives: 2-aminobenzimidazole (2ab), albendazole (abz) and tris(2-benzimidazolylmethyl)amine (ntb). The compounds were evaluated for their in vitro antimicrobial activity against Staphylococcus aureus, Micrococcus luteus, Salmonella typhi, Pseudomonas aeruginosa, Escherichia coli and Proteus vulgaris. Their cytotoxic activity was also evaluated using human cancer lines, HeLa, HCT-15 and SKLU-1. The halide tetrahedral compounds [Co(bz)₂Br₂] 3, [Zn(2ab)₂Cl₂] · 0.5H₂O 11, [Co(abz)Cl₂(H₂O)] · 3H₂O 14, [Co(abz)Br₂(H₂O)] 15, [Zn(abz)Cl₂(H₂O)] · 3H₂O 17 and [Zn(abz)Br₂(H₂O)] · H₂O 18 displayed similar minimal inhibition concentration (MIC) values against Micrococcus luteus and Escherichia coli, comparable to those of amoxicillin and chloramphenicol. Additionally, 11 showed a wide range of activity towards Gram(+) and Gram(−) microorganisms. The tetradentate ntb and its trigonal bipyramidal cobalt(II) and zinc(II) compounds were active, regardless of the anion present in the complex. Compound [Co(abz)Cl₂(H₂O)] · 3H₂O 14 showed promising activity in HeLa cells, while [Co(ntb)Br]Br · H₂O 21 inhibited Hela and HCT-15 cell lines.     

Synthesis, characterization and bioactivity of a novel iron(III) 18-metallacrown-6 complex with S-donor ligands

The reaction of 4-salicyloyl thiosemicarbazide (H₃st) (1) with FeCl₃ · 6H₂O in methanol solution gives a novel 18-metallacrown-6 [Fe(st)(H₂O)]₆ · 21H₂O (2). The structure containing S–Fe bonds was determined for 2 by using X-ray crystallography. The ring of the metallacrown was consisted of six interlink [Fe–N–N] repeated units. And the ligand enforces the metal ions to form the stereochemistry as a propeller configuration with alternation Λ/Δ form. The largest diameters of the disc-shaped hexanuclear ring are about 7.44 Å at entrance, 9.91 Å at the central of the cavity, respectively. The structural integrity and stability of the metallacrown ring were studied by electronspray ionization ESI-MS and UV–Vis spectroscopy. The results show that it is stable and soluble in methanol. Antibacterial screening data show that the complex 2 weakened dramatically the antibacterial activity of the ligand H₃st.     

Hydrogen peroxide degradation by immobilized cells of alkaliphilic Bacillus halodurans

Whole cells of Bacillus halodurans LBK 261 were used as a source of catalase for degradation of hydrogen peroxide. The organism, B. halodurans grown at 55°C and pH 10, yielded a maximum catalase activity of 275 U g^-1 (wet wt.) cells. The catalase in the whole cells was active over a broad range of pH with a maximum at pH 8-9. The enzyme was optimally active at 55°C, but had low stability above 40°C. The whole cell biocatalyst exhibited a K_m of 6.6 mM for H₂O₂ and V_max of 707 mM H₂O₂ min^-1 g^-1 wet wt. cells, and showed saturation kinetics at 50 mM H₂O₂. The cells were entrapped in calcium alginate and used for H₂O₂ degradation at pH 9 in batch and continuous mode. In the batch process, the immobilized preparation containing 1.5 g (wet wt.) cells could be recycled at least four times for complete degradation of the peroxide in 50 mL solution at 25°C. An excess of immobilized biocatalyst could be used in a continuous stirred tank reactor for an average of 9 days at temperatures upto 55°C, and in a packed bed reactor (PBR) for 5 days before the beads started to deform.     

Structural determinations, magnetic and EPR studies of complexes involving the Cr(OH)2Cr unit

Five heterometallic compounds with formulae [Ba(H₂O)₄Cr₂(μ-OH)₂(nta)₂] · 3H₂O (I), [M(bpy)₂(H₂O)₂] [Cr₂(OH)₂(nta)₂] · 7H₂O, where M²⁺ = Zn, (II); Ni, (III); Co, (IV) and [Mn(H₂O)₃(bpy)Cr₂(OH)₂(nta)₂] · (bpy) · 5H₂O (V); bpy = 2,2′-bipyridine, (nta = nitrilotriacetate ion) have been prepared by reaction of I with the corresponding M^II-sulfates in the presence of 2,2′-bipyridine. Substances I–V have been characterized by magnetic susceptibility measurements, EPR and X-ray determinations. I represents a 2D coordination polymer formed by coordination of centrosymmetrical dimeric chromium(III) units and Barium cations. The 10-coordinate Ba polyhedron is completed by four water molecules. Compounds II–IV are isostructural and consist of non-centrosymmetric dimeric anions [Cr₂(μ-OH)₂(nta)₂]²⁻, complex cations [M^II(bpy)₂(H₂O)₂]²⁺ and solvate water molecules. The octahedral coordination of chromium atoms implies four donor atoms of the nta³⁻ ligands and two bridging OH groups. Multiple hydrogen bonds of coordinated and solvate water molecules link anions and cations in a 3D network. A similar [Cr₂(μ-OH)₂(nta)₂]²⁻ unit is found in V. The bridging function is performed by a carboxylate oxygen atom of the nta ligand that leads to the formation of a trinuclear complex [Mn(bpy)(H₂O)₂Cr₂(μ-OH)₂(nta)₂]. Experimental and calculated frequency and temperature dependences of EPR spectra of these compounds are presented. The fine structure appearing on the EPR spectra of compound V is analyzed in detail at different temperatures. It is established that the main part of the EPR signals is due to the transitions in the spin states of a spin multiplet with S = 2. Analyses of experimental and calculated spectra confirm the absence of interaction between metal ions (M^II) and Cr-dimers in complexes III and IV and the presence of weak Mn–Cr interactions in V. The temperature dependence of magnetic susceptibilities for I–V was fitted on the basis of the expression derived from isotropic Hamiltonian including a bi-quadratic exchange term.     

Copper(II) coordination polymers derived from triethanolamine and pyromellitic acid for bioinspired mild peroxidative oxidation of cyclohexane

The new inorganic 1D coordination polymer [Cu₂(H₃tea)₂(μ₄-pma)]_n has been prepared, via self-assembly in aqueous medium, from copper(II) nitrate, triethanolamine (H₃tea), pyromellitic acid (H₄pma) and lithium hydroxide, and characterized by IR spectroscopy, elemental and single-crystal X-ray diffraction analyses. This compound and the related 2D polymer [Cu₂(μ-H₂tea)₂{μ₃-Na₂(H₂O)₄}(μ₆-pma)]_n · 10nH₂O are shown to mimic the alkane partial oxidation activity of the multicopper particulate methane monooxygenase, acting as catalysts precursors for the peroxidative oxidation of cyclohexane into cyclohexanol and cyclohexanone, by hydrogen peroxide (as green oxidant) and at room temperature in acidic MeCN/H₂O medium. An overall yield (based on cyclohexane) of 29% has been achieved.     

Influence of different site symmetries of Eu centers on the luminescence properties of Anderson-based compounds

Two compounds, [Eu(H₂O)₇][Al(OH)₆Mo₆O₁₈] · 4H₂O (1) and {(C₂H₅NO₂)₂[Eu(H₂O)₅]}[Al(OH)₆Mo₆O₁₈] · 10H₂O (2), have been synthesized by conventional solution method and determined by single-crystal X-ray diffraction. Compound 1 shows a 1D chain structure built up of alternating Anderson-type polyanions [Al(OH)₆Mo₆O₁₈]³⁻ and hydrated rare-earth ions Eu³⁺. Compound 2 displays a 3D supramolecular network structure containing 1D sandglass-like channels along c axis, which were occupied by repetitive array of (H₂O)₈ clusters. Extensive hydrogen bonds play an important role in the formation of the 3D structures of 1 and 2. Luminescence measurements reveal that 1 and 2 exhibit intense red and orange fluorescent emission at room temperature, respectively. Origin of the distinct emission can be assigned to the different site symmetries of Eu³⁺ centers in the two compounds. These results are consistent with the crystal structures of the two compounds.     

Structure and characterization of platinum(II) and platinum(IV) complexes with protonated nucleobase ligands

The reaction of H₂[PtCl₆] · 6H₂O and (H₃O)[PtCl₅(H₂O)] · 2(18C6) · 6H₂O (18C6 = 18-crown-6) with 9-methylguanine (MeGua) proceeded with the protonation of MeGua forming 9-methylguaninium hexachloroplatinate(IV) dihydrate (MeGuaH)₂[PtCl₆] · 2H₂O (1).The same compound was obtained from the reaction of Na₂[PtCl₆] with (MeGuaH)Cl.On the other hand, the reaction of guanosine (Guo) with (H₃O)[PtCl₅(H₂O)] · 2(18C6) · 6H₂O in methanol at 60 °C proceeded with the cleavage of the glycosidic linkage and with ligand substitution to give a guaninium complex of platinum(IV), [PtCl₅(GuaH)] · 1.5(18C6) · H₂O (2).Within several weeks in aqueous solution a slow reduction took place yielding the analogous guaninium platinum(II) complex, [PtCl₃(GuaH)] · (18C6) · 2Me₂CO (3).H₂[PtCl₆] · 6H₂O and guanosine was found to react in water, yielding (GuoH)₂[PtCl₆] (4) and in ethanol at 50 °C, yielding [PtCl₅(GuoH)] · 3H₂O (5).Dissolution of complexes 2 and 5 in DMSO resulted in the substitution of the guaninium and guanosinium ligands, respectively, by DMSO forming [PtCl₅(DMSO)]⁻.Reactions of 1-methylcytosine (MeCyt) and cytidine (Cyd) with H₂[PtCl₆] · 6H₂O and(H₃O)[PtCl₅(H₂O)] · 2(18C6) · 6H₂O resulted in the formation of hexachloroplatinates with N3 protonated pyrimidine bases as cation (MeCytH)₂[PtCl₆] · 2H₂O (6) and (CydH)₂[PtCl₆] (7), respectively. Identities of all complexes were confirmed by ¹H, ¹³C and ¹⁹⁵Pt NMR spectroscopic investigations, revealing coordination of GuoH⁺ in complex 5 through N7 whereas GuaH⁺ in complex 3 may be coordinated through N7 or through N9. Solid state structure of hexachloroplatinate 1 exhibited base pairing of the cations yielding (MeGuaH⁺)₂, whereas in complex 6 non-base-paired MeCytH⁺ cations were found. In both complexes, a network of hydrogen bonds including the water molecules was found. X-ray diffraction analysis of complex 3 exhibited a guaninium ligand that is coordinated through N9 to platinum and protonated at N1, N3 and N7. In the crystal, these NH groups form hydrogen bonds N–HO to oxygen atoms of crown ether molecules.     

Enhanced activity and stability of immobilized lipases by treatment with polar solvents prior to lyophilization

Lipases from Candida rugosa, Mucor javanicus and Rhizopus oryzae were respectively adsorbed on Amberlite XAD-7 followed by incubation in 2-propanol and then lyophilization. The activities of the immobilized enzymes were 1.6–3.4 times higher than those of the immobilized enzymes without incubation in the organic solvent before lyophilization for esterification of lauric acid (0.1 M) and 1-propanol (0.1 M) in isooctane at 37 °C. The immobilized C. rugosa lipase (Sigma) without the incubation did not show any activity but displayed considerable activity (19.8 μmol h⁻¹ mg⁻¹) after the incubation before lyophilization. Besides 2-propanol, acetone, 1-propanol and ethyl acetate were also found to be good solvents for treating M. javanicus lipase immobilized on Amberlite XAD-7 and acetone was the best among them. When incubated in isooctane at 25 °C for 120 h, the immobilized M. javanicus lipase prepared by incubation in acetone for 1 h before lyophilization retained 70% of its initial activity while the immobilized enzyme without the solvent treatment kept only 50% of its initial activity.     

Two new multi-cobalt-containing heteropolyoxotungstates

Two new multi-cobalt-containing polyoxotungstates K₄Na₆Co₂(H₂O)₁₂{Co(H₂O)₄[Co₂(H₂O)₁₀Co₄(H₂O)₂(B--SiW₉O₃₄)₂]₂} · 40H₂O (1) and K₁₀Na₂[Co₄(H₂O)₂(GeW₉O₃₄)₂] · 20H₂O (2) have been obtained by the routine synthetic reactions in aqueous solution. The polyoxoanion framework of 1 consists of two sandwich-type polyoxoanions [Co₄(H₂O)₂(B--SiW₉O₃₄)₂]¹²⁻ connected together by a [CoO₂(H₂O)₄] cluster to constitute the sandwich dimer, and then, four isolated Co(H₂O)₅ cations coordinate to the dimer through four μ₂-O atoms. The polyoxoanion 2 is isomorphic to the sandwich-type polyoxoanion [Co₄(H₂O)₂(B--SiW₉O₃₄)₂]¹²⁻ in 1. The magnetic property of compound 1 has been studied by measuring its magnetic susceptibility in the temperature range 2.0–300.0 K, indicating the existence of intramolecular ferromagnetic Co–Co interactions, and, the electrochemical properties of 1 and 2 are detected in the pH 4 buffer solution.     

Molecular structures of Fe(II) complexes with mono- and di-protonated ethylenediamine-N,N,N′,N′-tetraacetate (Hedta and H2edta), as determined by X-ray crystal analyses

The molecular structure of the title complexes [Fe(H₂O)₄][Fe(Hedta)(H₂O)]₂ · 4H₂O (I) and [Fe(H[₂edta)(H₂O)] · 2H₂O (II) have been determined by single-crystal X-ray analyses. The crystal data are as follows: I: monoclinic, P2₁/n, A = 11.794(2), B = 15.990(2), C = 9.206(2) Å, β = 90.33(1)°, V = 1736.1(5) ų, Z = 2 and R = 0.030; II: monoclinic, C2/c, A = 11.074(2), B = 9.856(2), C = 14.399(2) Å, β = 95.86(1)°, V = 1563.3(4) ų, Z = 4 and R = 0.025. I is found to be isomorphous with the Mn^II analog reported earlier and to contain a seven-coordinate and approximately pentagonal-bipyramidal (PB) [Fe^II(Hedta)(H₂O]⁻ unit in which Hedta acts as a hexadentate ligand. The [Fe^II(H₂edta)(H₂O)] unit in II has also a seven-coordinate PB structure with the two protonated equatorial glycine arms both remaining coordinated, and thus bears a structural resemblance to the seven-coordinate [Co^II(H₂edta)(H₂O)] reported previously.     

Synthesis, structure, and heterogeneous catalytic activity of tungsten chalcogenide cubane cluster containing alkaline earth metal complex

A new compound containing a cubane tungsten chalcogenide cluster [W₄(μ₃-Te)₄(CN)₁₂]⁶⁻ and Ca²⁺ complex units has been prepared by the reaction of aqueous solution of K₆[W₄(μ₃-Te)₄(CN)₁₂] · 5H₂O with the solution of a Ca(NO₃)₂ and phen(1,10-phenanthroline) (1:2 molar ratio) in a solvent mixture of H₂O/EtOH. The structure of [{Ca(phen)₂(H₂O)}{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄Te₄(CN)₁₂] · 5H₂O 1 has been determined by X-ray crystallography. Compound 1 contains [{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄(μ₃- Te)₄(CN)₁₂] units bridged by {Ca(phen)₂(H₂O)}²⁺ units to form an one-dimensional zigzag chain structure. Interestingly, compound 1 showed a heterogeneous catalytic activity in the transesterification of a range of esters with methanol under the mild conditions. Moreover, it can be reused without any loss of activity through 10 runs with ester.     

N,N′-Ethylene-bis(3-methoxysalicylideneimine) mononuclear (4f) and heterodinuclear (3d–4f) metal complexes: Synthesis, crystal structure and luminescent properties

The stepwise synthesis of mononuclear (4f) and heterodinuclear (3d–4f) Salen-like complexes has been investigated through structural determination of the intermediate and final products occurring in the process. In the first step, reactions of ligand H₂L and Ln(NO₃)₃ · 6H₂O give rise to three mononuclear lanthanide complexes Ln(H₂L)(NO₃)₃ [H₂L = N,N′-ethylene-bis(3-methoxysalicylideneimine), Ln = Nd (1), Eu (2) and Tb (3)], in which N,N′-ethylene-bis(3-methoxysalicylideneimine) acts as tetradentate ligands with the O₂O₂ set of donor atoms capable of effective coordination. These species are fairly stable and have been isolated. Then, addition of Cu(Ac)₂ · H₂O to the mononuclear lanthanide complex yields expected heterodinuclear (3d–4f) complexes Cu(L)Ln(NO₃)₃ · H₂O [Ln = Nd (4) and Eu (5)] where the Cu(II) ion is inserted to the inner N₂O₂ cavity. Luminescent analysis reveals that complex 3 exhibits characteristic metal-centered fluorescence of Tb(III) ion. However, the characteristic luminescence of both Sm(III) and Eu(III) ions is not observed both in solution and solid state of the complexes.     

High-activity biocatalysts in organic media: solid-state buffers as the immobilisation matrix for protein-coated microcrystals

Recently, we reported a new high-activity biocatalyst for use in organic media termed protein-coated microcrystals (PCMC) (Kreiner et al. [2001] Chem Commun 12:1096-1097). These novel particles consist of water-soluble micron-sized crystalline particles coated with the given biocatalyst(s) and are prepared in a one-step rapid dehydration process. In this study we extended the choice of immobilisation matrix from a simple inorganic salt, K(2)SO(4), to other compounds, both inorganic and zwitterionic, that act as solid-state buffers for biocatalysis in organic media. The catalytic activity of serine proteases subtilisin Carlsberg (SC) and alpha-chymotrypsin (CT) were significantly increased when coated onto the surface of solid-state buffers, as measured in acetonitrile/1wt% H(2)O. SC-PCMC with both organic and inorganic buffer carriers (Na-AMPSO, Na(2)CO(3), and NaHCO(3)) showed a 3-fold greater activity than that observed when using the unbuffered system (PCMC-SC/K(2)SO(4)). In comparison with freeze-dried preparations, this represents an approximately 3,000-fold increase in catalytic activity. Importantly, there is no improvement in catalytic activity upon external addition of any of the solid-state buffers to the reaction mixture. When acting in a solid-state buffer capacity, good buffering capacity was observed with SC-PCMC (3 wt% protein loading) prepared from a 1:1 mixture of AMPSO and AMPSO-Na. Alternatively, increasing the amount of solid-state buffer in the system allows improvement of the buffering. This can be achieved either by decreasing the protein loading of the SC/Na-AMPSO-PCMC or by addition of further external solid-state buffer to the reaction mixture. The catalytic activity of lipase-PCMC prepared from solid-state buffers was found less responsive to immobilisation.     

Structures and magnetism of rubidium and cesium salts of dimeric oxovanadium(IV) tartrate(4−) complexes

Complexes of type A₄[VO(tart)]₂·nH₂O, where A = Rb or Cs and tart =d,l-tartrate(4−) (n = 2) or d,d-tartrate(4−) (n = 2 for Rb and n = 3 for Cs), were prepared from an aqueous mixture of V₂O₅, AOH and H₄tart. These complexes were studied by single-crystal X-ray diffraction methods: Rb₄[VO(d,l-tart)]₂·2H₂O, space group P1 with a = 8.156(1),b = 8.246(1),c = 8.719(1)Å, = 66.09(1)°, β = 65.07(1)°, γ = 82.40(1)°,Z = 2, 1917 observed reflections, and final R_w = 0.035; Cs₄[VO(d,l-tart)]₂·2H₂O, space group P₂₁/c with a = 9.350(1),b = 13.728(2),c = 8.479(1)Å, β = 106.77(1)°,Z = 4, 2235 observed reflections, and final R_w = 0.054; Rb₄[VO(d,d-tart)]₂·2H₂O, space group P₄₁₂₂ with a = 8.072(1),c = 32.006(3)Å,Z = 8, 1014 observed reflections and final R_w = 0.038; Cs₄[VO(d,d-tart)]₂·3H₂O, space group P₁₂₂ with a = 8.184(1),c = 33.680(5)Å,Z = 8, 1310 observed reflections, and final R_w = 0.063. Bulk magnetic susceptibility data (1.5–300 K) for these compounds and A₄[VOl,l-tart)]₂·nH₂O (A = Rb, Cs) were obtained on polycrystalline samples. These data were analyzed in terms of a Van Vleck exchange coupled S = 1/2 model which was modified to include an interdimer exchange parameters Θ. Analysis of the low-temperature (1.5–20 K) susceptibility data gave 2J = +1.30 cm⁻¹ and Θ = −1.86 K for Rb₄[VO(d,l-tart)]₂·2H₂O, 2J = +1.16 cm⁻¹ and Θ = −1.69 K for Cs₄[VO(d,l-tart)]₂·2H₂O, 2J = +1.90 cm⁻¹ and Θ = −0.82 K for Rb₄[VO(d,d-tart)]₂·2H₂O, 2J = +2.04 cm⁻¹ and Θ = −0.80 K for Rb₄[VO(l,l-tart)]₂·2H₂O, 2J = +1.52 cm⁻¹ and Θ = −0.25 K for Cs₄[VO(d,d-tart)]₂·3H₂O, and 2J = +1.64 cm⁻¹ and Θ = −0.31 K for Cs₄[VO(l,l-tart)]₂·3H₂O. These results suggest the magnitudes of intradimer (ferromagnetic and interdimer (antiferromagnetic) exchange interactions are similar in these complexes, as observed for the analogous Na salts.     

One-dimensional polymeric chlorocadmate(II) systems of N-methylpiperazinium and N,N′-dimethylpiperazinium compounds: synthesis, structural and thermal properties

The chlorocadmate(II) systems of (H₂me₂pipz)[Cd₂Cl₆(H₂O)₂] (1) and (H₂mepipz)₂[Cd₃Cl₁₀(H₂O)] (2) (L = me₂pipz = N,N′-dimethylpiperazine; L′ = mepipz = N-methylpiperazine) were prepared and their structural and thermal properties investigated. Compound 1 is monoclinic, space group P2₁/c, A = 7.664(1), B = 7.472(4), C = 15.347(1) Å, β = 99.468(7)°, Z = 2, R = 0.024. The crystal structure consists of organic cations and infinite one-dimensional chains of [CdCl₃(H₂O)]_n³⁻ anions. Each Cd atom is octahedrally surrounded by bridged and terminal chlorine atoms and by a water molecule, which is in trans position with respect to the terminal chlorine atom. Inter- and intrachain hydrogen bond interactions between the terminal chlorine atoms and the water molecules contribute to the crystal packing. Compound 2 is orthorhombic, space group Cmc2₁, A = 15.286(3), B = 13.354(3), C = 13.154(3) Å, R = 0.023. The crystal structure consists of organic dications and infinite chains of [Cd₂Cl₆(CdCl₄H₂O]_n⁴⁻ units running along the [001] axis. Each unit is formed of regularly alternate six-coordinated Cd atoms, one of them linking one pentacoordinated Cd atom which completes its coordination througha water molecule. A strong hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential scanning calorimetry measurements did not show the presence of any structural phase transitions. The structures are compared with those of (H₂pipz)[Cd₂Cl₆(H₂O)₂] (3), (H₂mepipz)[Cd₂Cl₆(H₂O)₂]·H₂O (4) and (H₂mepipz)[Cd₂Cl₆] (5) (L = pipz = piperazine, L′ = mepipz = N-ethylpiperazine).     

Effects of calcium on the thermal stability, stability in organic solvents and resistance to hydrogen peroxide of artichoke (Cynara scolymus L.) peroxidase: A potential method of enzyme control

The effects of calcium ions (Ca²⁺) on the stability of artichoke (Cynara scolymus L.) peroxidase (AKPC) have been studied. The thermal stability of AKPC was improved by the addition of Ca²⁺; the melting temperature increased by 20 °C and the deactivation energy by 26 kJ mol⁻¹. AKPC was stable in a selection of organic solvents but was less active with 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) than under aqueous conditions. Ca²⁺-free AKPC retained more activity in the presence of organic solvents due to its better maintenance of the rate of compound I formation with hydrogen peroxide (H₂O₂) compared to AKPC-Ca²⁺. AKPC retained at least 75% activity over 24 h in the pH range 3.0–10.5 and about 50% over 1 month at pH 7.0 or 5.5, irrespective of the Ca²⁺ content. AKPC-Ca²⁺ was considerably more resistant to inactivation by H₂O₂ than Ca²⁺-free AKPC suggesting that the presence of Ca²⁺ boosts turnover under oxidizing conditions. AKPC has been applied as an alternative to horseradish peroxidase (HRP) in glucose concentration assays; the presence of Ca²⁺ or of the Ca²⁺ chelating agent ethylenediaminetetraacetic acid made no difference to the final result. The possibility is discussed that addition and removal of a labile Ca²⁺ from AKPC could be used to control enzyme activity both in vivo and in vitro.     

A dicopper complex with distant metal centers. Structure, magnetic properties, electrochemistry and catecholase activity

The crystal structure and magnetic properties of a dinuclear copper(II) complex of the ligand [2,8-dimethyl-5,11-di-(dimethylethyleneamine) 1,4,5,6,7,10,11,12-octahydroimidazo [4,5-h] imidazo [4,5-c] [1,6]diazecine] dimeim have been investigated. Also, its catecholase activity has been explored in different solvent mixtures: MeCN/H₂O and OH/H₂O, each at several pH values. In CH₃OH/H₂O, where the activity was superior, the optimal pH value for the catalytic activity was found to be lower than in CH₃CN/H₂O. The study of the complex’s electrochemical behavior (cyclic voltammetry) which was also investigated in these various media, revealed that although an increase in pH in both solvent mixtures results in an increase both in Me oxidizing power (E_1/2) and reversibility (i_pa/i_pc) the change of solvent system seems to be a more influencing factor. The superior catalytic activity found in MeOH/H₂O_pH=8.0, is associated with a significantly more reversible behavior displayed in this medium. Potentiometric determination of the overall formation constant and three successive pK_as for the complex, suggest the formation of stable hydroxo complexes which could be the catalytically active species.     

Thermal conductivity and H2O content in rabbit kidney cortex and medulla

1. 1.|H₂O content and local-tissue thermal conductivity were measured in cortex and medulla of 7 freshly-excised rabbit kidneys.

2. 2.|Tissue H₂O content and thermal conductivity k (83.4% and 0.516 W m^−t K⁻¹, respectively) in the medulla were significantly higher than those (77.7% and 0.475 W m⁻¹ K⁻¹, respectively) measured in the cortex.

3. 3.|Correlations between the measured parameters are made, and the variability of previously-reported measurements of kidney-tissue thermal conductivity is discussed.

Optimization of culture conditions for production of cis-epoxysuccinic acid hydrolase using response surface methodology

Response surface methodology, which allows for rapid identification of important factors and optimization of them to enhance enzyme production, was employed here to optimize culture conditions for the production of cis-epoxysuccinic acid hydrolase from Bordetella sp. strain 1–3. In the first step, a Plackett–Burman design was used to evaluate the effects of nine variables (yeast extract, cis-epoxysuccinic acid, KH₂PO₄, K₂HPO₄ · 3H₂O, MgSO₄ · 7H₂O, trace minerals solution, culture volume, initial pH and incubation time) on the enzyme production. Yeast extract, cis-epoxysuccinic acid and KH₂PO₄ had significant influences on cis-epoxysuccinic acid hydrolase production and their concentrations were further optimized using central composite design and response surface analysis. A combination of adjusting the concentration of yeast extract to 7.8 g/l, cis-epoxysuccinic acid to 9.8 g/l, and KH₂PO₄ to 1.12 g/l would favor maximum cis-epoxysuccinic acid hydrolase production. An enhancement of cis-epoxysuccinic acid hydrolase production from 5.6 U/ml to 9.27 U/ml was gained after optimization.     

Syntheses, structures and magnetic properties of mono- and di-manganese inclusion compounds

Mono- and di-manganese inclusion compounds 1 and 2 are reported. Two mono-manganese molecules Mn(bpy)₂(NO₃)₂ (bpy=2,2′-bipyridine) and [Mn(bpy)₂(NO₃)(H₂O)]·NO₃ coexist in the mole ratio of 1:1 in the structure of 1, while two di-manganese molecules [Mn₂O(bpy)₂(phtha)₂(H₂O)₂]·(NO₃)₂ (phtha=phthalate) and [Mn₂O(bpy)₂(phtha)₂(NO₃)(H₂O)]·NO₃ in the structure of 2. Refluxing Mn(NO₃)₂/bpy/phthalic acid reaction mixtures in CH₃CN leads to the isolation of 1, further concentration of the reaction solution in raising temperature results in 2. The Mn₁ and Mn₂ units in the inclusion compounds 1 and 2 are similar to other reported Mn₁ and Mn₂ analogs, respectively. The Jahn–Teller distortion was observed to give rise to the elongation along the O_terminal---Mn---O_carboxyl axes for all the four Mn(III) sites in 2, leading to unexpected longer Mn(III)---O_aqua than Mn(II)---O_aqua in 1. Extensive hydrogen bonding interactions among H₂O, NO₃ ⁻ and COOH were observed in the two inclusion compounds. Cyclic voltammetry of 2 in DMF displays two quasi-reversible redox couples at +0.10/+0.22 and −0.43/−0.36 V assigned to the Mn(III)Mn(IV)/2Mn(III) and 2Mn(III)/Mn(III)Mn(II), respectively. Variable temperature magnetic susceptibilities of 1 and 2 were measured. The data were fit to a model including axial zero-field splitting term and a good fit was found with D=1.77 cm⁻¹, g=1.98 and F=1.48×10⁻⁵ for 1. For 2, the least-squares fitting of the experimental data led to J=2.37 cm⁻¹, g=2.02 and D=0.75 cm⁻¹ with R=1.45×10⁻³.