Site-protected fixation and immobilization of Escherichia coli cells displaying surface-anchored beta-lactamase

Bacteria displaying heterologous receptors or enzymes on their surface hold great potential as whole-cell adsorbents and biocatalysts, respectively. For industrial applications, such surface-engineered cells need to be killed and chemically fixed to prevent disintegration and leakage of the displayed proteins under process conditions. It is also highly desirable to couple the chemically stabilized cells onto a solid support matrix for additional mechanical stability, flexibility in reactor choice, and easy separation from processed medium. Recently, we described the development of a readily scalable methodology for cell killing, fixation, and outer membrane stabilization via glutaraldehyde fixation followed by secondary crosslinking (Freeman, A., Abramov, S. and Georgiou, G. 1996. Biotechnol. Bioeng. 52: 625-630). Glutaraldehyde treatment was also found, however, to reduce the specific activity of a model enzyme, beta-lactamase displayed on the surface of E. coli. Here, we show that crosslinking carried out in the presence of beta-lactamase inhibitors, namely phenyl boronic acid or sodium borate, protects the active site from chemical modification resulting in up to threefold higher specific activities without affecting the cell-stabilizing effect of the glutaraldehyde treatment. To prepare an immobilized whole cell biocatalyst, residual unreacted surface aldehyde groups were employed to immobilize covalently the fixed bacteria onto chitosan-coated cellulose powder. The binding of the bacteria onto chitosan-coated cellulose was quantitative up to cell loading of 83 mg dry cell weight/g of support. Cell immobilization did not introduce mass transfer limitations and created only a modest reduction in Vmax. Thus, chemical crosslinking, affected in presence of reversible active-site inhibitors and coupled with cell immobilization on chitosan-coated cellulose represents a widely useful methodology for the process application of recombinant bacteria displaying surface-anchored heterologous proteins.     

Detoxification of organophosphate nerve agents by immobilized dual functional biocatalysts in a cellulose hollow fiber bioreactor

A whole-cell technology for detoxification of organophosphates based on genetically engineered Escherichia coli cell expressing both cellulose-binding domain (CBD) and organophosphorus hydrolase (OPH) onto cell surface was reported recently (Wang et al., 2002). This study reports the application of these biocatalysts when immobilized in a cellulose hollow fiber bioreactor (HFB) for the biodetoxification of a model organophosphate, paraoxon, in a continuous flow mode. In 24 h, 0.79 mg wet cell/cm2 fiber surface were immobilized onto cellulose fibers specifically and strongly through the cellulose binding domain, forming a monolayer demonstrated by Scanning Electronic Micrograph, and essentially no cell was washed away by washing buffer. The immobilized biocatalyst had a high performance of detoxifying paraoxon solution of 5,220 mumol/h x L reactor or 990 mumol/h x m2 reactor. The immobilized biocatalysts maintained a stable degradation capacity for 15 uses over a period of 48 days with only 10% decline in degradation efficiency under operating and storage conditions. In addition, the bioreactor was easily regenerated by washing with 1% sodium dodecyl sulfate (SDS), with 86.7% immobilization capacity and 93.9% degradation efficiency recovery. This is the first report using the HFB in a non-traditional way, immobilizing whole-cell biocatalysts by specific adhesion thus rendering the catalysis operation the advantages of low pressure drop, low shear force, and low energy requirement. The successful application of this genetically engineered dual functional E. coli strain in a model bioreactor shows its promise in large-scale detoxification of organophosphate nerve agents in bulk liquid phase.     

Use of Pseudomonas putida EstA as an anchoring motif for display of a periplasmic enzyme on the surface of Escherichia coli

The functional expression of proteins on the surface of bacteria has proven important for numerous biotechnological applications. In this report, we investigated the N-terminal fusion display of the periplasmic enzyme beta-lactamase (Bla) on the surface of Escherichia coli by using the translocator domain of the Pseudomonas putida outer membrane esterase (EstA), which is a member of the lipolytic autotransporter enzymes. To find out the transport function of a C-terminal domain of EstA, we generated a set of Bla-EstA fusion proteins containing N-terminally truncated derivatives of the EstA C-terminal domain. The surface exposure of the Bla moiety was verified by whole-cell immunoblots, protease accessibility, and fluorescence-activated cell sorting. The investigation of growth kinetics and host cell viability showed that the presence of the EstA translocator domain in the outer membrane neither inhibits cell growth nor affects cell viability. Furthermore, the surface-exposed Bla moiety was shown to be enzymatically active. These results demonstrate for the first time that the translocator domain of a lipolytic autotransporter enzyme is an effective anchoring motif for the functional display of heterologous passenger protein on the surface of E. coli. This investigation also provides a possible topological model of the EstA translocator domain, which might serve as a basis for the construction of fusion proteins containing heterologous passenger domains.     

The normally periplasmic enzyme β-lactamase is specifically and efficiently translocated through the Escherichia coli outer membrane when it is fused to the cell-surface enzyme pullulanase

Hybrid proteins were constructed in which C-terminal regions of the bacterial cell surface and extracellular protein pullulanase were replaced by the mature forms of the normally periplasmic Escherichia coli proteins beta-lactamase or alkaline phosphatase. In E. coli strains expressing all pullulanase secretion genes, pullulanase-beta-lactamase hybrid protein molecules containing an N-terminal 834-amino-acid pullulanase segment were efficiently and completely transported to the cell surface. This hybrid protein remained temporarily anchored to the cell surface, presumably via fatty acids attached to the N-terminal cysteine of the pullulanase segment, and was subsequently specifically released into the medium in a manner indistinguishable from that of pullulanase itself. These results suggest that the C-terminal extremity of pullulanase lacks signal(s) required for export to the cell surface. When beta-lactamase was replaced by alkaline phosphatase, the resulting hybrid also became exposed at the cell surface, but exposition was less efficient and specific release into the medium was not observed. We conclude that proteins that do not normally cross the outer membrane can be induced to do so when fused to a permissive site near the C-terminus of pullulanase.     

Development of novel yeast cell surface display system for homo-oligomeric protein by coexpression of native and anchored subunits

Streptavidin derived from Streptomyces avidinii was displayed on the cell surface of the yeast Saccharomyces cerevisiae by cell-surface engineering using two types of plasmid for the expression of a native subunit and an anchored subunit fused with the C-terminus of 318 amino acids of Flo1p containing a glycosylphosphatidylinositol anchor attachment signal. The displayed streptavidin had the binding ability for biotinylated compounds. This was confirmed by fluorescence microscopy after the adsorption of yeast cells displaying streptavidin and biotinylated fluorescein isothiocyanate. On the other hand, streptavidin produced by cells harboring only the plasmid for the expression of the anchored subunit showed a very low binding activity for biotinylated compounds. Cells displaying streptavidin may constitute novel whole-cell affinity adsorbents widely used for immunoassay and biosensing. This coexpression method will ensure that proteins, such as homo- and hetero-oligomeric proteins, are displayed on the cell surface in an active form.     

Functional expression of mammalian NADPH-cytochrome P450 oxidoreductase on the cell surface of Escherichia coli

To develop a whole-cell oxidoreductase system without the practical limitation of substrate/product transport, easy preparation, stability of enzymes, and low expression levels, we here report the development of a whole cell biocatalyst displaying rat NADPH-cytochrome P450 oxidoreductase (CPR, 77-kDa) on the surface of Escherichia coli by using ice-nucleation protein from Pseudomonas syringae. Surface localization and functionality of the CPR were verified by flow cytometry, electron microscopy, and measurements of enzyme activities. The results of this study comprise the first report of microbial cell-surface display of diflavin-containing mammalian enzymes. This system will allow us to select and develop oxidoreductases, containing bulky and complex prosthetic groups of FAD and FMN, into practically useful whole-cell biocatalysts for broad biological and biotechnological applications including the selective synthesis of new chemicals and pharmaceuticals, bioconversion, bioremediation, and bio-chip development.     

Membrane proteins correlated with expression of the polysialic acid capsule in Escherichia coli K1.

Growth of Escherichia coli K1 strains at 15 degrees C results in a defect in the synthesis or assembly of the K1 polysialic acid capsule. Synthesis is reactivated in cells grown at 15 degrees C after upshift to 37 degrees C, and activation requires protein synthesis (Whitfield et al., J. Bacteriol. 159:321-328, 1984). Using this temperature-induced defect, we determined the molecular weights and locations of membrane proteins correlated with the expression of K1 (polysialosyl) capsular antigen. Pulse-labeling experiments demonstrated the presence of 11 proteins whose synthesis was correlated with capsule appearance at the cell surface. Using the differential solubility of inner and outer membranes in the detergent Sarkosyl, we localized five of the proteins in the outer membrane and four in the inner membrane. The subcellular location of two of the proteins was not determined. Five proteins appeared in the membrane simultaneously with the initial expression of the K1 capsule at the cell surface. One of these proteins, a 40,000-dalton protein localized in the outer membrane, was identified as porin protein K, which previously has been shown to be present in the outer membrane of encapsulated E. coli. The possible role of these proteins in the synthesis of the polysialosyl capsule is discussed.     

Association of cytoskeletal re-organization with capping of the complement decay-accelerating factor on T lymphocytes

Recent studies have identified cell-associated proteins that are membrane anchored by glycosyl-inositol-phospholipid structures but the biologic implications of this mode of membrane attachment are incompletely understood. Among proteins anchored in this way is the decay-accelerating factor (DAF), a complement (C) regulatory factor that functions on blood cell surfaces to prevent autologous C attack. As one approach to investigate the functional consequences of glycosyl-inositol-phospholipid-anchoring of DAF in T lymphocytes, the effects of crosslinking surface DAF molecules were compared to those of crosslinking conventionally by anchored cluster of differentiation (CD) proteins. Upon incubation with anti-DAF mAb and anti-murine IgG, DAF re-distributed to a pole of the cell with a t1/2 at 37 degrees C of 4.4 min as compared to t1/2 of 3.5 to 7 min for CD3, CD4, and CD8. Re-distribution of DAF occurred independently of CD2, CD3, CD4, or CD8. Anti-DAF immunoprecipitates of membrane extracts of cells chemically cross-linked with dithiobis(succinimidylpropionate) contained only monomeric DAF. Immunofluorescent staining demonstrated clustered actin, tubulin, and vimentin beneath the capped DAF protein. Pre-treatment of cells with colchicine or 8-azidoadenosine 3',5'-cyclic phosphate, but not lumicolchicine, resulted in reduction of the t1/2 for DAF to 1 to 2.6 min. Conversely, treatment of cells with cytochalasins B or D completely blocked DAF capping. The results indicate that, upon cross-linking, glycosyl-inositol-phospholipid-anchored DAF molecules undergo capping similar to conventionally anchored CD molecules and that DAF capping is associated with cytoskeletal reorganization.     

Display of lipase on the cell surface of Escherichia coli using OprF as an anchor and its application to enantioselective resolution in organic solvent

We have developed a new cell surface display system using a major outer membrane protein of Pseudomonas aeruginosa OprF as an anchoring motif. Pseudomonas fluorescens SIK W1 lipase gene was fused to the truncated oprF gene by C-terminal deletion fusion strategy. The truncated OprF-lipase fusion protein was successfully displayed on the surface of Escherichia coli. Localization of the truncated OprF-lipase fusion protein was confirmed by western blot analysis, immunofluorescence microscopy, and whole-cell lipase activity. To examine the enzymatic characteristics of the cell surface displayed lipase, the whole-cell enzyme activity and stability were determined under various conditions. Cell surface displayed lipase showed the highest activity at 37 degrees C and pH 8.0. It retained over 80% of initial activity after incubation for a week in both aqueous solution and organic solvent. When the E. coli cells displaying lipases were used for enantioselective resolution of racemic 1-phenylethanol in hexane, (R)-phenyl ethyl acetate was successfully obtained with the enantiomeric excess of greater than 96% in 36 h of reaction. These results suggest that E. coli cells displaying lipases using OprF as an anchoring motif can be employed for various biotechnological applications both in aqueous and nonaqueous phases.     

The silica-binding Si-tag functions as an affinity tag even under denaturing conditions

We recently reported a one-step affinity purification method using a silica-binding protein, designated Si-tag, as a fusion partner and silica particles as the specific adsorbents (Ikeda et al., Protein Expr. Purif. 71 [2010] 91-95) [13]. In this study, we demonstrate that the Si-tag also binds to the silica surface even under denaturing conditions, thereby facilitating affinity purification of recombinant proteins from inclusion bodies. A fusion protein of the Si-tag and a biotin acceptor peptide (AviTag), which was expressed as inclusion bodies in Escherichia coli, was used as a model protein. To simplify our purification method, we disrupted recombinant E. coli cells by sonication in the presence of 8M urea with concomitant solubilization of the inclusion bodies. The fusion protein was recovered with a purity of 90 ± 3% and yield of 92 ± 6% from the cleared cell lysate. We also discuss the binding mechanism of the Si-tag to a silica surface in the presence of high concentrations of denaturant. We propose that the intrinsic disorder of the polycationic Si-tag polypeptide plays an important role in its binding to the silica surface under denaturing conditions.     

Detoxification of organophosphate nerve agents by immobilized Escherichia coli with surface-expressed organophosphorus hydrolase

An improved whole-cell technology for detoxifying organophosphate nerve agents was recently developed based on genetically engineered Escherichia coli with organophosphorus hydrolase anchored on the surface. This article reports the immobilization of these novel biocatalysts on nonwoven polypropylene fabric and their applications in detoxifying contaminated wastewaters. The best cell loading (256 mg cell dry weight/g of support or 50 mg cell dry weight/cm2 of support) and subsequent hydrolysis of organophosphate nerve agents were achieved by immobilizing nongrowing cells in a pH 8, 150 mM citrate-phosphate buffer supplemented with 1 mM Co2+ for 48 h via simple adsorption, followed by organophosphate hydrolysis in a pH 8, 50 mM citrate-phosphate buffer supplemented with 0.05 mM Co2+ and 20% methanol at 37 degrees C. In batch operations, the immobilized cells degraded 100% of 0.8 mM paraoxon, a model organophosphate nerve agent, in approximately 100 min, at a specific rate of 0.160 mM min-1 (g cell dry wt)-1. The immobilized cells retained almost 100% activity during the initial six repeated cycles and close to 90% activity even after 12 repeated cycles, extending over a period of 19 days without any nutrient supplementation. In addition to paraoxon, other commonly used organophosphates, such as diazinon, coumaphos, and methylparathion were hydrolyzed efficiently. The cell immobilization technology developed here paves the way for an efficient, simple, and cost-effective method for detoxification of organophosphate nerve agents.     

Effects of temperature on Escherichia coli overproducing beta-lactamase or human epidermal growth factor.

The effects of temperature on strains of Escherichia coli which overproduce and excrete either beta-lactamase or human epidermal growth factor were investigated. E. coli RB791 cells containing plasmid pKN which has the tac promoter upstream of the gene for beta-lactamase were grown and induced with isopropyl-beta-D-thiogalactopyranoside in batch culture at 37, 30, 25, and 20 degrees C. The lower temperature greatly reduced the formation of periplasmic beta-lactamase inclusion bodies, increased significantly the total amount of beta-lactamase activity, and increased the purity of extracellular beta-lactamase from approximately 45 to 90%. Chemostat operation at 37 and 30 degrees C was difficult due to poor cell reproduction and beta-lactamase production. However, at 20 degrees C, continuous production and excretion of beta-lactamase were obtained for greater than 450 h (29 generations). When the same strain carried plasmid pCU encoding human epidermal growth factor, significant cell lysis was observed after induction at 31 and 37 degrees C, whereas little cell lysis was observed at 21 and 25 degrees C. Both total soluble and total human epidermal growth factor increased with decreasing temperature. These results indicate that some of the problems of instability of strains producing high levels of plasmid-encoded proteins can be mitigated by growth at lower temperatures. Further, lower temperatures can increase for at least some secreted proteins both total plasmid-encoded protein formed and the fraction that is soluble.     

Cell surface and cellular debris-associated heat-stable lipolytic enzyme activities of the marine alga Nannochloropsis oceanica

Microbial surface display of lipases can be effectively employed for the development of whole-cell biocatalysts for industrial bioconversions. In the present work, we report for the first time the presence of thermostable lipolytic enzyme activities against p-nitrophenyl laurate, both on the cell surface and the cellular debris fraction of the marine microalga Nannochloropsis oceanica (strain CCMP1779). Whole cell-associated lipolytic activity (WCLA) shows a 2.5-fold stimulation after heat treatment at 100?°C for 60?min, while the activity of the respective cell debris is retained for 15?min. In contrast, heat treatment renders the soluble fraction of the disrupted cells inactive. The progress curve of cellular debris-associated lipase activity is biphasic and levels off very fast. Treatment with the surfactants SDS, Triton X-100 and CHAPS, which are known to inhibit lipase activity in various degrees, results in a loss of both cell bound and cell debris lipolytic activities (CDLA). The highest whole cell lipase catalytic efficiency was observed against p-nitrophenyl butyrate and the optimum pH for hydrolysis was determined at pH 7.0. Both unheated and heated undisrupted whole cell biocatalysts are also catalytically active against olive oil. High-salt concentrations (1M NaCl) lead to about 50% whole cell enzyme inhibition whereas the activity of heated cells increases. These findings offer novel insight into the biocatalytic properties and the biotechnological applicability of microalgal lipases from N. oceanica.     

Cell wall sorting of lipoproteins in Staphylococcus aureus.

Many surface proteins are thought to be anchored to the cell wall of gram-positive organisms via their C termini, while the N-terminal domains of these molecules are displayed on the bacterial surface. Cell wall anchoring of surface proteins in Staphylococcus aureus requires both an N-terminal leader peptide and a C-terminal cell wall sorting signal. By fusing the cell wall sorting of protein A to the C terminus of staphylococcal beta-lactamase, we demonstrate here that lipoproteins can also be anchored to the cell wall of S. aureus. The topology of cell wall-anchored beta-lactamase is reminiscent of that described for Braun's murein lipoprotein in that the N terminus of the polypeptide chain is membrane anchored whereas the C-terminal end is tethered to the bacterial cell wall.     

Effects of temperature on Escherichia coli overproducing beta-lactamase or human epidermal growth factor

The effects of temperature on strains of Escherichia coli which overproduce and excrete either beta-lactamase or human epidermal growth factor were investigated. E. coli RB791 cells containing plasmid pKN which has the tac promoter upstream of the gene for beta-lactamase were grown and induced with isopropyl-beta-D-thiogalactopyranoside in batch culture at 37, 30, 25, and 20 degrees C. The lower temperature greatly reduced the formation of periplasmic beta-lactamase inclusion bodies, increased significantly the total amount of beta-lactamase activity, and increased the purity of extracellular beta-lactamase from approximately 45 to 90%. Chemostat operation at 37 and 30 degrees C was difficult due to poor cell reproduction and beta-lactamase production. However, at 20 degrees C, continuous production and excretion of beta-lactamase were obtained for greater than 450 h (29 generations). When the same strain carried plasmid pCU encoding human epidermal growth factor, significant cell lysis was observed after induction at 31 and 37 degrees C, whereas little cell lysis was observed at 21 and 25 degrees C. Both total soluble and total human epidermal growth factor increased with decreasing temperature. These results indicate that some of the problems of instability of strains producing high levels of plasmid-encoded proteins can be mitigated by growth at lower temperatures. Further, lower temperatures can increase for at least some secreted proteins both total plasmid-encoded protein formed and the fraction that is soluble.     

Selection of a whole-cell biocatalyst for methyl parathion biodegradation

Whole-cell biocatalyst has the potential to become a cost-effective alternative to conventional enzyme methods for solving ecological and energy issues. However, cytosolic-expressing biocatalyst systems are critically disadvantaged due to the low permeability of the cell membrane. To overcome substrate transport barrier, periplasmic secretion and surface display biocatalysts were developed by expressing signal peptides or anchor proteins in Escherichia coli. In this work, six carriers were compared in regard to whole-cell activity of methyl parathion hydrolase (MPH). Our results indicate that the surface display systems yielded one to three times whole-cell activity than the periplasmic secretion systems. Although periplasmic secretion systems showed generally more stable than surface display systems, surface display appeared more suitable for whole-cell biocatalyst. It should note that the applicability of the DsbA/PhoA/AIDA-I leader to MPH expression is shown here for the first time. In addition, the result provided a useful reference for other whole-cell biocatalyst selection.     

New ways to make old walls: bacterial surprises

Two papers in this issue of Cell (Paradis-Bleau et?al., 2010 and Typas et?al., 2010) report that the lipoproteins LpoA and LpoB are required for the synthesis of cell walls in Escherichia coli. Attached to the bacterial outer membrane, these new cell wall components regulate penicillin-binding proteins located at the inner membrane.     

Cell surface engineering of yeast for applications in white biotechnology

Cell surface engineering is a promising strategy for the molecular breeding of whole-cell biocatalysts. By using this strategy, yeasts can be constructed by the cell surface display of functional proteins; these yeasts are referred to as arming yeasts. Because reactions using arming yeasts as whole-cell biocatalysts occur on the cell surface, materials that cannot enter the cell can be used as reaction substrates. Numerous arming yeasts have therefore been constructed for a wide range of uses such as biofuel production, synthesis of valuable chemicals, adsorption or degradation of environmental pollutants, recovery of rare metal ions, and biosensors. Here, we review the science of yeast cell surface modification as well as current applications and future opportunities.     

Molecular, genetic, and topological characterization of O-antigen chain length regulation in Shigella flexneri.

The rfb region of Shigella flexneri encodes the proteins required to synthesize the O-antigen component of its cell surface lipopolysaccharides (LPS). We have previously reported that a region adjacent to rfb was involved in regulating the length distribution of the O-antigen polysaccharide chains (D. F. Macpherson et al., Mol. Microbiol. 5:1491-1499, 1991). The gene responsible has been identified in Escherichia coli O75 (called rol [R. A. Batchelor et al., J. Bacteriol. 173:5699-5704, 1991]) and in E. coli O111 and Salmonella enterica serovar typhimurium strain LT2 (called cld [D. A. Bastin et al., Mol. Microbiol. 5:2223-2231, 1991]). Through a combination of subcloning, deletion, and transposon insertion analysis, we have identified a gene adjacent to the S. flexneri rfb region which encodes a protein of 36 kDa responsible for the length distribution of O-antigen chains in LPS as seen on silver-stained sodium dodecyl sulfate-polyacrylamide gels. DNA sequence analysis identified an open reading frame (ORF) corresponding to the rol gene. The corresponding protein was almost identical in sequence to the Rol protein of E. coli O75 and was highly homologous to the functionally identical Cld proteins of E. coli O111 and S. enterica serovar typhimurium LT2. These proteins, together with ORF o349 adjacent to rfe, had almost identical hydropathy plots which predict membrane-spanning segments at the amino- and carboxy-terminal ends and a hydrophilic central region. We isolated a number of TnphoA insertions which inactivated the rol gene, and the fusion end points were determined. The PhoA+ Rol::PhoA fusion proteins had PhoA fused within the large hydrophilic central domain of Rol. These proteins were located in the whole-membrane fraction, and extraction with Triton X-100 indicated a cytoplasmic membrane location. This finding was supported by sucrose density gradient fractionation of the whole-cell membranes and of E. coli maxicells expressing L-[35S]methionine-labelled Rol protein. Hence, we interpret these data to indicate that the Rol protein is anchored into the cytoplasmic membrane via its amino- and carboxy-terminal ends but that the majority of the protein is located in the periplasmic space. To confirm that rol is responsible for the effects on O-antigen chain length observed with the cloned rfb genes in E. coli K-12, it was mutated in S. flexneri by insertion of a kanamycin resistance cartridge. The resulting strains produced LPS with O antigens of nonmodal chain length, thereby confirming the function of the rol gene product. We propose a model for the function of Rol protein in which it acts as a type of molecular chaperone to facilitate the interaction of the O-antigen ligase (RfaL) with the O-antigen polymerase (Rfc) and polymerized, acyl carrier lipid-linked, O-antigen chains. Analysis of the DNA sequence of the region identified a number of ORFs corresponding to the well-known gnd and hisIE genes. The rol gene was located immediately downstream of two ORFs with sequence similarity to the gene encoding UDPglucose dehydrogenase (HasB) of Streptococcus pyogenes. The ORFs arise because of a deletion or frameshift mutation within the gene we have termed udg (for UDPglucose dehydrogenase).     

Signalling proteins in enterobacterial AmpC β-lactamase regulation

The cloned Citrobacter freundii ampC beta-lactamase is inducible in the presence of its regulatory gene ampR in Escherichia coli (Lindberg et al., 1985). The basal level of expression and inducibility are affected by two E. coli proteins encoded by the closely linked ampD and ampE genes. Deletion of both genes led to constitutive ampR-dependent overproduction of beta-lactamase, whereas an out-of-frame deletion in AmpD caused the basal expression to increase two-fold. This ampD1 mutant was inducible at lower beta-lactam concentrations than the wild type. An IS1 insertion in ampD was polar on ampE expression and increased basal beta-lactamase expression 30-fold while mediating a semi-constitutive phenotype. AmpE expressed from a recombinant plasmid in an ampD-ampE deletion mutant reduced basal beta-lactamase expression to wild-type levels but did not markedly reduce beta-lactam resistance since the cells became hyperinducible. In the absence of AmpD, increasing levels of AmpE therefore decrease the basal expression of AmpC beta-lactamase in an AmpR-dependent manner. AmpD modulated the response exerted on beta-lactamase expression by AmpE. The ampD gene encodes a 20.5kD cytoplasmic protein while the 32.1kD ampE gene product is an integral membrane protein with a likely ATP-binding site between the second and third putative transmembrane region. Since neither AmpD nor AmpE are needed for beta-lactam induction and since these proteins could not be covalently labelled by benzylpenicillin, they are not thought to act as beta-lactam-binding sensory transducers. Instead it is suggested that AmpD and AmpE sense the effect of beta-lactam action on peptidoglycan biosynthesis and relay this signal to AmpR.