SAS-4 Protein in Trypanosoma brucei Controls Life Cycle Transitions by Modulating the Length of the Flagellum Attachment Zone Filament

The evolutionarily conserved centriole/basal body protein SAS-4 regulates centriole duplication in metazoa and basal body duplication in flagellated and ciliated organisms. Here, we report that the SAS-4 homolog in the flagellated protozoan Trypanosoma brucei, TbSAS-4, plays an unusual role in controlling life cycle transitions by regulating the length of the flagellum attachment zone (FAZ) filament, a specialized cytoskeletal structure required for flagellum adhesion and cell morphogenesis. TbSAS-4 is concentrated at the distal tip of the FAZ filament, and depletion of TbSAS-4 in the trypomastigote form disrupts the elongation of the new FAZ filament, generating cells with a shorter FAZ associated with a longer unattached flagellum and repositioned kinetoplast and basal body, reminiscent of epimastigote-like morphology. Further, we show that TbSAS-4 associates with six additional FAZ tip proteins, and depletion of TbSAS-4 disrupts the enrichment of these FAZ tip proteins at the new FAZ tip, suggesting a role of TbSAS-4 in maintaining the integrity of this FAZ tip protein complex. Together, these results uncover a novel function of TbSAS-4 in regulating the length of the FAZ filament to control basal body positioning and life cycle transitions in T. brucei.     

A Novel Basal Body Protein That Is a Polo-like Kinase Substrate Is Required for Basal Body Segregation and Flagellum Adhesion in Trypanosoma brucei

The Polo-like kinase (PLK) in Trypanosoma brucei plays multiple roles in basal body segregation, flagellum attachment, and cytokinesis. However, the mechanistic role of TbPLK remains elusive, mainly because most of its substrates are not known. Here, we report a new substrate of TbPLK, SPBB1, and its essential roles in T. brucei. SPBB1 was identified through yeast two-hybrid screening with the kinase-dead TbPLK as the bait. It interacts with TbPLK in vitro and in vivo, and is phosphorylated by TbPLK in vitro. SPBB1 localizes to both the mature basal body and the probasal body throughout the cell cycle, and co-localizes with TbPLK at the basal body during early cell cycle stages. RNAi against SPBB1 in procyclic trypanosomes inhibited basal body segregation, disrupted the new flagellum attachment zone filament, detached the new flagellum, and caused defective cytokinesis. Moreover, RNAi of SPBB1 confined TbPLK at the basal body and the bilobe structure, resulting in constitutive phosphorylation of TbCentrin2 at the bilobe. Altogether, these results identified a basal body protein as a TbPLK substrate and its essential role in promoting basal body segregation and flagellum attachment zone filament assembly for flagellum adhesion and cytokinesis initiation.     

PLK4-phosphorylated NEDD1 facilitates cartwheel assembly and centriole biogenesis initiations

Centrosome duplication occurs under strict spatiotemporal regulation once per cell cycle, and it begins with cartwheel assembly and daughter centriole biogenesis at the lateral sites of the mother centrioles. However, although much of this process is understood, how centrosome duplication is initiated remains unclear. Here, we show that cartwheel assembly followed by daughter centriole biogenesis is initiated on the NEDD1-containing layer of the pericentriolar material (PCM) by the recruitment of SAS-6 to the mother centriole under the regulation of PLK4. We found that PLK4-mediated phosphorylation of NEDD1 at its S325 amino acid residue directly promotes both NEDD1 binding to SAS-6 and recruiting SAS-6 to the centrosome. Overexpression of phosphomimicking NEDD1 mutant S325E promoted cartwheel assembly and daughter centriole biogenesis initiations, whereas overexpression of nonphosphorylatable NEDD1 mutant S325A abolished the initiations. Collectively, our results demonstrate that PLK4-regulated NEDD1 facilitates initiation of the cartwheel assembly and of daughter centriole biogenesis in mammals.     

Polo-like kinase phosphorylation of bilobe-resident TbCentrin2 facilitates flagellar inheritance in Trypanosoma brucei

In the protist parasite Trypanosoma brucei, the single Polo-like kinase (TbPLK) controls the inheritance of a suite of organelles that help position the parasite''s single flagellum. These include the basal bodies, the bilobe, and the flagellar attachment zone (FAZ). TbCentrin2 was previously shown to be a target for TbPLK in vitro, and this is extended in this study to in vivo studies, highlighting a crucial role for serine 54 in the N-terminal domain. Duplication of the bilobe correlates with the presence of TbPLK and phospho-TbCentrin2, identified using phosphospecific antiserum. Mutation of S54 leads to slow growth (S54A) or no growth (S54D), the latter suggesting that dephosphorylation is needed to complete bilobe duplication and subsequent downstream events necessary for flagellum inheritance.     

Molecular characterization of centriole assembly in ciliated epithelial cells

Ciliated epithelial cells have the unique ability to generate hundreds of centrioles during differentiation. We used centrosomal proteins as molecular markers in cultured mouse tracheal epithelial cells to understand this process. Most centrosomal proteins were up-regulated early in ciliogenesis, initially appearing in cytoplasmic foci and then incorporated into centrioles. Three candidate proteins were further characterized. The centrosomal component SAS-6 localized to basal bodies and the proximal region of the ciliary axoneme, and depletion of SAS-6 prevented centriole assembly. The intraflagellar transport component polaris localized to nascent centrioles before incorporation into cilia, and depletion of polaris blocked axoneme formation. The centriolar satellite component PCM-1 colocalized with centrosomal components in cytoplasmic granules surrounding nascent centrioles. Interfering with PCM-1 reduced the amount of centrosomal proteins at basal bodies but did not prevent centriole assembly. This system will help determine the mechanism of centriole formation in mammalian cells and how the limitation on centriole duplication is overcome in ciliated epithelial cells.     

Plk4 triggers autonomous de novo centriole biogenesis and maturation

Centrioles form centrosomes and cilia. In most proliferating cells, centrioles assemble through canonical duplication, which is spatially, temporally, and numerically regulated by the cell cycle and the presence of mature centrioles. However, in certain cell types, centrioles assemble de novo, yet by poorly understood mechanisms. Herein, we established a controlled system to investigate de novo centriole biogenesis, using Drosophila melanogaster egg explants overexpressing Polo-like kinase 4 (Plk4), a trigger for centriole biogenesis. We show that at a high Plk4 concentration, centrioles form de novo, mature, and duplicate, independently of cell cycle progression and of the presence of other centrioles. Plk4 concentration determines the temporal onset of centriole assembly. Moreover, our results suggest that distinct biochemical kinetics regulate de novo and canonical biogenesis. Finally, we investigated which other factors modulate de novo centriole assembly and found that proteins of the pericentriolar material (PCM), and in particular γ-tubulin, promote biogenesis, likely by locally concentrating critical components.     

Basal body duplication in Paramecium requires γ-tubulin

First discovered in the fungus Aspergillus nidulans[1], γ-tubulin is a ubiquitous component of microtubule organizing centres [2]. In centrosomes, γ-tubulin has been immunolocalized at the pericentriolar material, suggesting a role in cytoplasmic microtubule nucleation [3], as well as within the centriole core itself [4]. Although its function in the nucleation of the mitotic spindle and of cytoplasmic interphasic microtubules has been demonstrated in vitro[5], [6] and in vivo[7], [8], [9], the hypothesis that γ-tubulin could intervene in centriole assembly has never been experimentally addressed because the mitotic arrest caused by the inactivation of γ-tubulin in vivo precludes any further phenotypic analysis of putative centriole defects. The issue can be addressed in the ciliate Paramecium, which is characterized by numerous basal bodies that are similar to centrioles but the biogenesis of which is not tightly coupled to the nuclear division cycle. We demonstrate that the inactivation of the Paramecium γ-tubulin genes leads to inhibition of basal body duplication.     

Kinetics and regulation of de novo centriole assembly. Implications for the mechanism of centriole duplication

BACKGROUND: Centriole duplication is a key step in the cell cycle whose mechanism is completely unknown. Why new centrioles always form next to preexisting ones is a fundamental question. The simplest model is that preexisting centrioles nucleate the assembly of new centrioles, and that although centrioles can in some cases form de novo without this nucleation, the de novo assembly mechanism should be too slow to compete with normal duplication in order to maintain fidelity of centriole duplication. RESULTS: We have measured the rate of de novo centriole assembly in vegetatively dividing cells that normally always contain centrioles. By using mutants of Chlamydomonas that are defective in centriole segregation, we obtained viable centrioleless cells that continue to divide, and find that within a single generation, 50% of these cells reacquire new centrioles by de novo assembly. This suggests that the rate of de novo assembly is approximately half the rate of templated duplication. A mutation in the VFL3 gene causes a complete loss of the templated assembly pathway without eliminating de novo assembly. A mutation in the centrin gene also reduced the rate of templated assembly. CONCLUSIONS: These results suggest that there are two pathways for centriole assembly, namely a templated pathway that requires preexisting centrioles to nucleate new centriole assembly, and a de novo assembly pathway that is normally turned off when centrioles are present.     

SAS-4 is a C. elegans centriolar protein that controls centrosome size

Centrosomes consist of a centriole pair surrounded by pericentriolar material (PCM). Previous work suggested that centrioles are required to organize PCM to form a structurally stable organelle. Here, we characterize SAS-4, a centriole component in Caenorhabditis elegans. Like tubulin, SAS-4 is incorporated into centrioles during their duplication and remains stably associated thereafter. In the absence of SAS-4, centriole duplication fails. Partial depletion of SAS-4 results in structurally defective centrioles that contain reduced levels of SAS-4 and organize proportionally less PCM. Thus, SAS-4 is a centriole-associated component whose amount dictates centrosome size. These results provide novel insight into the poorly understood role of centrioles as centrosomal organizers.     

Naegleria gruberi De Novo Basal Body Assembly Occurs via Stepwise Incorporation of Conserved Proteins

Centrioles and basal bodies are discrete structures composed of a cylinder of nine microtubule triplets and associated proteins. Metazoan centrioles can be found at mitotic spindle poles and are called basal bodies when used to organize microtubules to form the core structure of flagella. Naegleria gruberi, a unicellular eukaryote, grows as an amoeba that lacks a cytoplasmic microtubule cytoskeleton. When stressed, Naegleria rapidly (and synchronously) differentiates into a flagellate, forming a complete cytoplasmic cytoskeleton de novo, including two basal bodies and flagella. Here, we show that Naegleria has genes encoding conserved centriole proteins. Using novel antibodies, we describe the localization of three centrosomal protein homologs (SAS-6, γ-tubulin, and centrin-1) during the assembly of the flagellate microtubule cytoskeleton. We also used these antibodies to show that Naegleria expresses the proteins in the same order as their incorporation into basal bodies, with SAS-6 localizing first, followed by centrin and finally γ-tubulin. The similarities between basal body assembly in Naegleria and centriole assembly in animals indicate that mechanisms of assembly, as well as structure, have been conserved throughout eukaryotic evolution.The beautiful and enigmatic pinwheel structures of centrioles and basal bodies have captured the imaginations of cell biologists for over a century. These small (∼1-μm) organelles are composed largely of a cylinder of nine microtubule triplets (11). The surrounding amorphous material harbors the microtubule-organizing activities of the centrosome, placing centrioles at the hub of the microtubule cytoskeleton. Metazoan centrosomes define mitotic spindle poles, and their centrioles are called basal bodies when used to form cilia (29). Moreover, in 1900 Meeves showed in a series of classical experiments that centrioles and basal bodies are interconvertible structures (34). Centrioles must replicate exactly once per cell cycle, as duplication errors can lead to problems with chromosome segregation and cell morphology (17).Virtually all animal cells have a pair of centrosomal centrioles that duplicate via “templated” assembly, with the new centriole developing perpendicular and attached to a preexisting centriole (4). Centrioles can also be formed “de novo” in cytosol devoid of preexisting centrioles and basal bodies (20). In addition to many in vivo examples (20), terminally differentiated fibroblasts held in S phase can assemble centrioles de novo after removal of preexisting centrioles by laser microsurgery (15).The amoeboflagellate Naegleria gruberi grows as an amoeba that completely lacks a cytoplasmic microtubule cytoskeleton. However, when exposed to stressors such as temperature, osmotic, or pH changes, Naegleria rapidly differentiates into a flagellate, forming a complete cytoplasmic cytoskeleton from scratch, including two basal bodies and flagella (8). This differentiation occurs synchronously, with approximately 90% of cells growing visible flagella in a 15-min window (T₅₀ = 65 min after initiation of differentiation). As part of this differentiation, Naegleria has been shown to assemble the pinwheel structure of the basal bodies de novo, about 10 min before flagella are seen (11).Two centrosomal proteins that have been studied during Naegleria differentiation are centrin and γ-tubulin. Centrin is a calcium-binding phosphoprotein that is an integral component of the wall and lumen of basal bodies and of the pericentriolar lattice in many organisms (4, 19). During differentiation, Naegleria induces synthesis of centrin protein, which then localizes specifically to basal body structures throughout differentiation (18). γ-Tubulin is a general microtubule nucleation factor that localizes to microtubule-organizing centers (MTOCs) of many types. Surprisingly, Naegleria''s γ-tubulin homolog has been reported to localize to basal body precursor complexes and then move to the other end of the cell before disappearing completely (32).A third protein that has come under recent scrutiny for its role in centriole duplication is SAS-6, a functionally conserved coiled-coil protein required for the formation of diverse basal body precursor structures (7, 21,–23, 31). In Caenorhabditis elegans and Drosophila melanogaster, SAS-6 is recruited at S phase to form the “central tube,” a cylindrical basal body precursor that lacks microtubules (22, 23). SAS-6 is also required for the formation of the flat ring or cartwheel with nine radiating spokes, which is the first structure to be formed in the Chlamydomonas basal body (21).To determine if Naegleria is likely to have typical basal body components, we identified conserved basal body genes in the Naegleria genome. We also made antibodies to and localized Naegleria''s homologs of SAS-6 and γ-tubulin. Finally, we have determined the order of expression and incorporation of these proteins, as well as centrin, during Naegleria de novo basal body assembly.     

DSAS-6 organizes a tube-like centriole precursor, and its absence suggests modularity in centriole assembly

Centrioles are microtubule-based cylindrical structures that exhibit 9-fold symmetry and facilitate the organization of centrosomes, flagella, and cilia [1]. Abnormalities in centrosome structure and number occur in many cancers [1, 2]. Despite its importance, very little is known about centriole biogenesis. Recent studies in C. elegans have highlighted a group of molecules necessary for centriole assembly [1, 3]. ZYG-1 kinase recruits a complex of two coiled-coil proteins, SAS-6 and SAS-5, which are necessary to form the C. elegans centriolar tube, a scaffold in centriole formation [4, 5]. This complex also recruits SAS-4, which is required for the assembly of the centriolar microtubules that decorate that tube [4, 5]. Here we show that Drosophila SAS-6 is involved in centriole assembly and cohesion. Overexpression of DSAS-6 in syncitial embryos led to the de novo formation of multiple microtubule-organizing centers (MTOCs). Strikingly, the center of these MTOCs did not contain centrioles, as described previously for SAK/PLK4 overexpression [6]. Instead, tube-like structures were present, supporting the idea that centriolar assembly starts with the formation of a tube-like scaffold, dependent on DSAS-6 [5]. In DSAS-6 loss-of-function mutants, centrioles failed to close and to elongate the structure along all axes of the 9-fold symmetry, suggesting modularity in centriole assembly. We propose that the tube is built from nine subunits fitting together laterally and longitudinally in a modular and sequential fashion, like pieces of a layered "hollow" cake.     

A SAS-6-Like Protein Suggests that the Toxoplasma Conoid Complex Evolved from Flagellar Components

SAS-6 is required for centriole biogenesis in diverse eukaryotes. Here, we describe a novel family of SAS-6-like (SAS6L) proteins that share an N-terminal domain with SAS-6 but lack coiled-coil tails. SAS6L proteins are found in a subset of eukaryotes that contain SAS-6, including diverse protozoa and green algae. In the apicomplexan parasite Toxoplasma gondii, SAS-6 localizes to the centriole but SAS6L is found above the conoid, an enigmatic tubulin-containing structure found at the apex of a subset of alveolate organisms. Loss of SAS6L causes reduced fitness in Toxoplasma. The Trypanosoma brucei homolog of SAS6L localizes to the basal-plate region, the site in the axoneme where the central-pair microtubules are nucleated. When endogenous SAS6L is overexpressed in Toxoplasma tachyzoites or Trypanosoma trypomastigotes, it forms prominent filaments that extend through the cell cytoplasm, indicating that it retains a capacity to form higher-order structures despite lacking a coiled-coil domain. We conclude that although SAS6L proteins share a conserved domain with SAS-6, they are a functionally distinct family that predates the last common ancestor of eukaryotes. Moreover, the distinct localization of the SAS6L protein in Trypanosoma and Toxoplasma adds weight to the hypothesis that the conoid complex evolved from flagellar components.     

Sequential protein recruitment in C. elegans centriole formation

Formation of the microtubule-based centriole is a poorly understood process that is crucial for duplication of the centrosome, the principal microtubule-organizing center of animal cells . Five proteins have been identified as being essential for centriole formation in Caenorhabditis elegans: the kinase ZYG-1, as well as the coiled-coil proteins SAS-4, SAS-5, SAS-6, and SPD-2 . The relationship between these proteins is incompletely understood, limiting understanding of how they contribute to centriole formation. In this study, we established the order in which these five proteins are recruited to centrioles, and we conducted molecular epistasis experiments expanding on earlier work. We find that SPD-2 is loaded first and is needed for the centriolar localization of the four other proteins. ZYG-1 recruitment is required thereafter for the remaining three proteins to localize to centrioles. SAS-5 and SAS-6 are recruited next and are needed for the presence of SAS-4, which is incorporated last. Our results indicate in addition that the presence of SAS-5 and SAS-6 allows diminution of centriolar ZYG-1. Moreover, astral microtubules appear dispensable for the centriolar recruitment of all five proteins. Several of these proteins have homologs in other metazoans, and we expect the assembly pathway that stems from our work to be conserved.     

Two Polo-like kinase 4 binding domains in Asterless perform distinct roles in regulating kinase stability

Plk4 (Polo-like kinase 4) and its binding partner Asterless (Asl) are essential, conserved centriole assembly factors that induce centriole amplification when overexpressed. Previous studies found that Asl acts as a scaffolding protein; its N terminus binds Plk4’s tandem Polo box cassette (PB1-PB2) and targets Plk4 to centrioles to initiate centriole duplication. However, how Asl overexpression drives centriole amplification is unknown. In this paper, we investigated the Asl–Plk4 interaction in Drosophila melanogaster cells. Surprisingly, the N-terminal region of Asl is not required for centriole duplication, but a previously unidentified Plk4-binding domain in the C terminus is required. Mechanistic analyses of the different Asl regions revealed that they act uniquely during the cell cycle: the Asl N terminus promotes Plk4 homodimerization and autophosphorylation during interphase, whereas the Asl C terminus stabilizes Plk4 during mitosis. Therefore, Asl affects Plk4 in multiple ways to regulate centriole duplication. Asl not only targets Plk4 to centrioles but also modulates Plk4 stability and activity, explaining the ability of overexpressed Asl to drive centriole amplification.     

Drosophila Ana2 is a conserved centriole duplication factor

In Caenorhabditis elegans, five proteins are required for centriole duplication: SPD-2, ZYG-1, SAS-5, SAS-6, and SAS-4. Functional orthologues of all but SAS-5 have been found in other species. In Drosophila melanogaster and humans, Sak/Plk4, DSas-6/hSas-6, and DSas-4/CPAP—orthologues of ZYG-1, SAS-6, and SAS-4, respectively—are required for centriole duplication. Strikingly, all three fly proteins can induce the de novo formation of centriole-like structures when overexpressed in unfertilized eggs. Here, we find that of eight candidate duplication factors identified in cultured fly cells, only two, Ana2 and Asterless (Asl), share this ability. Asl is now known to be essential for centriole duplication in flies, but no equivalent protein has been found in worms. We show that Ana2 is the likely functional orthologue of SAS-5 and that it is also related to the vertebrate STIL/SIL protein family that has been linked to microcephaly in humans. We propose that members of the SAS-5/Ana2/STIL family of proteins are key conserved components of the centriole duplication machinery.     

Basal Body Assembly in Ciliates: The Power of Numbers

Centrioles perform the dual functions of organizing both centrosomes and cilia. The biogenesis of nascent centrioles is an essential cellular event that is tightly coupled to the cell cycle so that each cell contains only two or four centrioles at any given point in the cell cycle. The assembly of centrioles and their analogs, basal bodies, is well characterized at the ultrastructural level whereby structural modules are built into a functional organelle. Genetic studies in model organisms combined with proteomic, bioinformatic and identifying ciliary disease gene orthologs have revealed a wealth of molecules requiring further analysis to determine their roles in centriole duplication, assembly and function. Nonetheless, at this stage, our understanding of how molecular components interact to build new centrioles and basal bodies is limited. The ciliates, Tetrahymena and Paramecium , historically have been the subject of cytological and genetic study of basal bodies. Recent advances in the ciliate genetic and molecular toolkit have placed these model organisms in a favorable position to study the molecular mechanisms of centriole and basal body assembly.     

Proteomic identification of novel cytoskeletal proteins associated with TbPLK,an essential regulator of cell morphogenesis in Trypanosoma brucei

Trypanosoma brucei is the causative agent of African sleeping sickness, a devastating disease endemic to sub-Saharan Africa with few effective treatment options. The parasite is highly polarized, including a single flagellum that is nucleated at the posterior of the cell and adhered along the cell surface. These features are essential and must be transmitted to the daughter cells during division. Recently we identified the T. brucei homologue of polo-like kinase (TbPLK) as an essential morphogenic regulator. In the present work, we conduct proteomic screens to identify potential TbPLK binding partners and substrates to better understand the molecular mechanisms of kinase function. These screens identify a cohort of proteins, most of which are completely uncharacterized, which localize to key cytoskeletal organelles involved in establishing cell morphology, including the flagella connector, flagellum attachment zone, and bilobe structure. Depletion of these proteins causes substantial changes in cell division, including mispositioning of the kinetoplast, loss of flagellar connection, and prevention of cytokinesis. The proteins identified in these screens provide the foundation for establishing the molecular networks through which TbPLK directs cell morphogenesis in T. brucei.     

SAS-4 is recruited to a dynamic structure in newly forming centrioles that is stabilized by the gamma-tubulin-mediated addition of centriolar microtubules

Centrioles are surrounded by pericentriolar material (PCM), which is proposed to promote new centriole assembly by concentrating gamma-tubulin. Here, we quantitatively monitor new centriole assembly in living Caenorhabditis elegans embryos, focusing on the conserved components SAS-4 and SAS-6. We show that SAS-4 and SAS-6 are coordinately recruited to the site of new centriole assembly and reach their maximum levels during S phase. Centriolar SAS-6 is subsequently reduced by a mechanism intrinsic to the early assembly pathway that does not require progression into mitosis. Centriolar SAS-4 remains in dynamic equilibrium with the cytoplasmic pool until late prophase, when it is stably incorporated in a step that requires gamma-tubulin and microtubule assembly. These results indicate that gamma-tubulin in the PCM stabilizes the nascent daughter centriole by promoting microtubule addition to its outer wall. Such a mechanism may help restrict new centriole assembly to the vicinity of preexisting parent centrioles that recruit PCM.     

Self-assembling SAS-6 Multimer Is a Core Centriole Building Block

Centrioles are conserved microtubule-based organelles with 9-fold symmetry that are essential for cilia and mitotic spindle formation. A conserved structure at the onset of centriole assembly is a “cartwheel” with 9-fold radial symmetry and a central tubule in its core. It remains unclear how the cartwheel is formed. The conserved centriole protein, SAS-6, is a cartwheel component that functions early in centriole formation. Here, combining biochemistry and electron microscopy, we characterize SAS-6 and show that it self-assembles into stable tetramers, which serve as building blocks for the central tubule. These results suggest that SAS-6 self-assembly may be an initial step in the formation of the cartwheel that provides the 9-fold symmetry. Electron microscopy of centrosomes identified 25-nm central tubules with repeating subunits and show that SAS-6 concentrates at the core of the cartwheel. Recombinant and native SAS-6 self-oligomerizes into tetramers with ∼6-nm subunits, and these tetramers are components of the centrosome, suggesting that tetramers are the building blocks of the central tubule. This is further supported by the observation that elevated levels of SAS-6 in Drosophila cells resulted in higher order structures resembling central tubule morphology. Finally, in the presence of embryonic extract, SAS-6 tetramers assembled into high density complexes, providing a starting point for the eventual in vitro reconstruction of centrioles.