Electrospun Poly(L-Lactide) Fiber with Ginsenoside Rg3 for Inhibiting Scar Hyperplasia of Skin

Hypertrophic scarring (HS) has been considered as a great concern for patients and a challenging problem for clinicians as it can be cosmetically disfiguring and functionally debilitating. In this study, Ginsenoside Rg3/Poly(l-lactide) (G-Rg3/PLLA) electrospun fibrous scaffolds covering on the full-thickness skin excisions location was designed to suppress the hypertrophic scar formation in vivo. SEM and XRD results indicated that the crystal G-Rg3 carried in PLLA electrospun fibers was in amorphous state, which facilitates the solubility of G-Rg3 in the PLLA electrospun fibrous scaffolds, and solubility of G-Rg3 in PBS is increased from 3.2 µg/ml for pure G-Rg3 powders to 19.4 µg/ml for incorporated in PLLA-10% fibers. The released G-Rg3 content in the physiological medium could be further altered from 324 to 3445 µg in a 40-day release period by adjusting the G-Rg3 incorporation amount in PLLA electrospun fibers. In vitro results demonstrated that electrospun G-Rg3/PLLA fibrous scaffold could significantly inhibit fibroblast cell growth and proliferation. In vivo results confirmed that the G-Rg3/PLLA electrospun fibrous scaffold showed significant improvements in terms of dermis layer thickness, fibroblast proliferation, collagen fibers and microvessels, revealing that the incorporation of the G-Rg3 in the fibers prevented the HS formation. The above results demonstrate the potential use of G-Rg3/PLLA electrospun fibrous scaffolds to rapidly minimize fibroblast growth and restore the structural and functional properties of wounded skin for patients with deep trauma, severe burn injury, and surgical incision.     

Detection of Phosphatidylcholine-Coated Gold Nanoparticles in Orthotopic Pancreatic Adenocarcinoma using Hyperspectral Imaging

Nanoparticle uptake and distribution to solid tumors are limited by reticuloendothelial system systemic filtering and transport limitations induced by irregular intra-tumoral vascularization. Although vascular enhanced permeability and retention can aid targeting, high interstitial fluid pressure and dense extracellular matrix may hinder local penetration. Extravascular diffusivity depends upon nanoparticle size, surface modifications, and tissue vascularization. Gold nanoparticles functionalized with biologically-compatible layers may achieve improved uptake and distribution while enabling cytotoxicity through synergistic combination of chemotherapy and thermal ablation. Evaluation of nanoparticle uptake in vivo remains difficult, as detection methods are limited. We employ hyperspectral imaging of histology sections to analyze uptake and distribution of phosphatidylcholine-coated citrate gold nanoparticles (CGN) and silica-gold nanoshells (SGN) after tail-vein injection in mice bearing orthotopic pancreatic adenocarcinoma. For CGN, the liver and tumor showed 26.5±8.2 and 23.3±4.1 particles/100μm² within 10μm from the nearest source and few nanoparticles beyond 50μm, respectively. The spleen had 35.5±9.3 particles/100μm² within 10μm with penetration also limited to 50μm. For SGN, the liver showed 31.1±4.1 particles/100μm² within 10μm of the nearest source with penetration hindered beyond 30μm. The spleen and tumor showed uptake of 22.1±6.2 and 15.8±6.1 particles/100μm² within 10μm, respectively, with penetration similarly hindered. CGH average concentration (nanoparticles/μm²) was 1.09±0.14 in the liver, 0.74±0.12 in the spleen, and 0.43±0.07 in the tumor. SGN average concentration (nanoparticles/μm²) was 0.43±0.07 in the liver, 0.30±0.06 in the spleen, and 0.20±0.04 in the tumor. Hyperspectral imaging of histology sections enables analysis of phosphatidylcholine-coated gold-based nanoparticles in pancreatic tumors with the goal to improve nanotherapeutic efficacy.     

Relation of function to diameter in afferent fibers of muscle nerves

1. A method of isolation of individual afferent fibers from muscle has yielded a representative sample of the fibers which comprise groups 1 (12 to 20 µ) and II (4 to 12 µ) of the afferent fiber diameter distribution of muscle nerves in cat. 2. Afferent fibers from muscle stretch receptors account for groups I and II of the afferent diameter spectrum of muscle nerves to soleus and medial gastrocnemius. Fibers from tendon organs are largely confined to the diameter range above 12 µ. This fiber group, which has a simple one-peak diameter distribution, is termed group IB. Fibers from muscle spindles show a bimodal diameter distribution and account for the remainder of fibers in the 12 to 20 µ group (termed IA) and substantially all of group II (4 to 12 µ). 3. No significant difference has been found in the receptor characteristics of the large (group IA) and intermediate sized (group II) spindle afferent fibers other than a slightly higher threshold of the latter to steady external stretch.     

Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses

Corrosion of modular taper junctions of hip implants may be associated with clinical failure. Taper design parameters, as well as the intraoperatively applied assembly forces, have been proposed to affect corrosion. Fretting corrosion is related to relative interface shear motion and fluid ingress, which may vary with contact force and area. It was hypothesised in this study that assembly forces modify the extent and distribution of the surface contact area at the taper interface between a cobalt chrome head and titanium stem taper with a standard threaded surface profile. Local abrasion of a thin gold coating applied to the stem taper prior to assembly was used to determine the contact area after disassembly. Profilometry was then used to assess permanent deformation of the stem taper surface profile. With increasing assembly force (500 N, 2000 N, 4000 N and 8000 N) the number of stem taper surface profile ridges in contact with the head taper was found to increase (9.2±9.3%, 65.4±10.8%, 92.8±6.0% and 100%) and the overall taper area in contact was also found to increase (0.6±0.7%, 5.5±1.0%, 9.9±1.1% and 16.1±0.9%). Contact was inconsistently distributed over the length of the taper. An increase in plastic radial deformation of the surface ridges (-0.05±0.14 μm, 0.1±0.14 μm, 0.21±0.22 μm and 0.96±0.25 μm) was also observed with increasing assembly force. The limited contact of the taper surface ridges at lower assembly forces may influence corrosion rates, suggesting that the magnitude of the assembly force may affect clinical outcome. The method presented provides a simple and practical assessment of the contact area at the taper interface.     

Electrochemical Polarization-Induced Changes in the Growth of Individual Cells and Biofilms of Pseudomonas fluorescens (ATCC 17552)

The effect of surface electrochemical polarization on the growth of cells of Pseudomonas fluorescens (ATCC 17552) on gold electrodes has been examined. Potentials positive or negative to the potential of zero charge (PZC) of gold were applied, and these resulted in changes in cell morphology, size at cell division, time to division, and biofilm structure. At −0.2 V (Ag/AgCl-3 M NaCl), cells elongated at a rate of up to 0.19 μm min⁻¹, rendering daughter cells that reached up to 3.8 μm immediately after division. The doubling time for the entire population, estimated from the increment in the fraction of surface covered by bacteria, was 82 ± 7 min. Eight-hour-old biofilms at −0.2 V were composed of large cells distributed in expanded mushroom-like microcolonies that protruded several micrometers in the solution. A different behavior was observed under positive polarization. At an applied potential of 0.5 V, the doubling time of the population was 103 ± 8 min, cells elongated at a lower rate (up to 0.08 μm min⁻¹), rendering shorter daughters (2.5 ± 0.5 μm) after division, although the duplication times were virtually the same at all potentials. Biofilms grown under this positive potential were composed of short cells distributed in a large number of compact microcolonies. These were flatter than those grown at −0.2 V or at the PZC and were pyramidal in shape. Polarization effects on cell growth and biofilm structure resembled those previously reported as produced by changes in the nutritional level of the culture medium.     

Schlemm’s Canal and Trabecular Meshwork in Eyes with Primary Open Angle Glaucoma: A Comparative Study Using High-Frequency Ultrasound Biomicroscopy

We investigated in vivo changes in Schlemm’s canal and the trabecular meshwork in eyes with primary open angle glaucoma (POAG). Relationships between Schlemm’s canal diameter, trabecular meshwork thickness, and intraocular pressure (IOP) were examined. Forty POAG patients and 40 normal individuals underwent 80-MHz Ultrasound Biomicroscopy examinations. The Schlemm’s canal and trabecular meshwork were imaged in superior, inferior, nasal and temporal regions. Normal individuals had an observable Schlemm’s canal in 80.3% of sections, a meridional canal diameter of 233.0±34.5 μm, a coronal diameter of 44.5±12.6 μm and a trabecular meshwork thickness of 103.9±11.1 μm, in POAG patients, Schlemm’s canal was observable in 53.1% of sections, a meridional canal diameter of 195.6±31.3 μm, a coronal diameter of 35.7±8.0 μm, and a trabecular meshwork thickness of 88.3±13.2 μm, which significantly differed from normal (both p <0.001). Coronal canal diameter (r = -0.623, p < 0.001) and trabecular meshwork thickness (r = -0.663, p < 0.001) were negatively correlated with IOP, but meridional canal diameter was not (r = -0.160, p = 0.156). Schlemm’s canal was observable in 50.5% and 56.6% of POAG patients with normal (<21 mmHg) and elevated (>21 mmHg) IOP, respectively (χ = 1.159, p = 0.282). Coronal canal diameter was significantly lower in the elevated IOP group (32.6±4.9 μm) than in the normal IOP group (35.7±8.0 μm, p < 0.001). This was also true of trabecular meshwork thickness (81.9±10.0 μm vs. 97.1±12.0 μm, p < 0.001). In conclusion, eyes with POAG had fewer sections with an observable Schlemm’s canal. Canal diameter and trabecular meshwork thickness were also lower than normal in POAG patients. Schlemm’s canal coronal diameter and trabecular meshwork thickness were negatively correlated with IOP.     

Foreign Body Reaction Associated with PET and PET/Chitosan Electrospun Nanofibrous Abdominal Meshes

Electrospun materials have been widely explored for biomedical applications because of their advantageous characteristics, i.e., tridimensional nanofibrous structure with high surface-to-volume ratio, high porosity, and pore interconnectivity. Furthermore, considering the similarities between the nanofiber networks and the extracellular matrix (ECM), as well as the accepted role of changes in ECM for hernia repair, electrospun polymer fiber assemblies have emerged as potential materials for incisional hernia repair. In this work, we describe the application of electrospun non-absorbable mats based on poly(ethylene terephthalate) (PET) in the repair of abdominal defects, comparing the performance of these meshes with that of a commercial polypropylene mesh and a multifilament PET mesh. PET and PET/chitosan electrospun meshes revealed good performance during incisional hernia surgery, post-operative period, and no evidence of intestinal adhesion was found. The electrospun meshes were flexible with high suture retention, showing tensile strengths of 3 MPa and breaking strains of 8–33%. Nevertheless, a significant foreign body reaction (FBR) was observed in animals treated with the nanofibrous materials. Animals implanted with PET and PET/chitosan electrospun meshes (fiber diameter of 0.71±0.28 µm and 3.01±0.72 µm, respectively) showed, respectively, foreign body granuloma formation, averaging 4.2-fold and 7.4-fold greater than the control commercial mesh group (Marlex). Many foreign body giant cells (FBGC) involving nanofiber pieces were also found in the PET and PET/chitosan groups (11.9 and 19.3 times more FBGC than control, respectively). In contrast, no important FBR was observed for PET microfibers (fiber diameter = 18.9±0.21 µm). Therefore, we suggest that the reduced dimension and the high surface-to-volume ratio of the electrospun fibers caused the FBR reaction, pointing out the need for further studies to elucidate the mechanisms underlying interactions between cells/tissues and nanofibrous materials in order to gain a better understanding of the implantation risks associated with nanostructured biomaterials.     

Macular Microcysts in Mitochondrial Optic Neuropathies: Prevalence and Retinal Layer Thickness Measurements

Purpose

To investigate the thickness of the retinal layers and to assess the prevalence of macular microcysts (MM) in the inner nuclear layer (INL) of patients with mitochondrial optic neuropathies (MON).

Methods

All patients with molecularly confirmed MON, i.e. Leber’s Hereditary Optic Neuropathy (LHON) and Dominant Optic Atrophy (DOA), referred between 2010 and 2012 were enrolled. Eight patients with MM were compared with two control groups: MON patients without MM matched by age, peripapillary retinal nerve fiber layer (RNFL) thickness, and visual acuity, as well as age-matched controls. Retinal segmentation was performed using specific Optical coherence tomography (OCT) software (Carl Zeiss Meditec). Macular segmentation thickness values of the three groups were compared by one-way analysis of variance with Bonferroni post hoc corrections.

Results

MM were identified in 5/90 (5.6%) patients with LHON and 3/58 (5.2%) with DOA. The INL was thicker in patients with MON compared to controls regardless of the presence of MM [133.1±7μm vs 122.3±9μm in MM patients (p<0.01) and 128.5±8μm vs. 122.3±9μm in no-MM patients (p<0.05)], however the outer nuclear layer (ONL) was thicker in patients with MM (101.4±1mμ) compared to patients without MM [77.5±8mμ (p<0.001)] and controls [78.4±7mμ (p<0.001)]. ONL thickness did not significantly differ between patients without MM and controls.

Conclusion

The prevalence of MM in MON is low (5-6%), but associated with ONL thickening. We speculate that in MON patients with MM, vitreo-retinal traction contributes to the thickening of ONL as well as to the production of cystic spaces.     

Cultured Ovules as Models for Cotton Fiber Development under Low Temperatures

Cotton fibers (Gossypium hirsutum L.) developing in vitro responded to cyclic temperature change similarly to those of field-grown plants under diumal temperature fluctuations. Absolute temperatures and rates of temperature change were similar under both conditions. In vitro fibers exhibited a “growth ring” for each time the temperature cycled to 22 or 15°C. Rings were rarely detected when the low point was 28°C. The rings seemed to correspond to alternating regions of high and low cellulose accumulation. Fibers developed in vitro under 34°C/22°C cycling developed similarly to constant 34°C controls, but 34°C/22°C and 34°C/15°C cycling caused delayed onset and prolonged periods of elongation and secondary wall thickening. Control fiber length and weight were finally achieved under 34°C/22°C cycling, but both parameters were reduced at the end of the experiment under 34°C/15°C cycling. Fibers developed under all conditions had equal bundle tensile strength. These results demonstrate that: (a) cool temperature effects on fiber development are at least partly fiber/ovule-specific events; they do not depend on whole-plant physiology; and (b) cultured ovules are valid models for research on the regulation of the field cool temperature response.     

Penetration of Rhizopus oligosporus into Soybeans in Tempeh

Histological observations were made on the penetration of hyphae of Rhizopus oligosporus into soybean cotyledons in tempeh, an Indonesian soybean food. Hyphal penetrations averaged one per 1,400 μm² (±390 μm²) on the curved (outer) cotyledon surface and one per 1,010 μm² (±340 μm²) on the flat (inner) one. Hyphae infiltrated to a depth of 742 μm, or about 25% of the average width of a soybean cotyledon. This previously unreported degree of penetration offers partial explanation for the rapid physical and chemical changes in soybeans during tempeh fermentation.     

Using Femtosecond Laser to Create Customized Corneal Flaps for Patients with Low and Moderate Refractive Error Differing in Corneal Thickness

This study is designed to evaluate the visual outcomes, accuracy, and predictability of corneal flaps with different thicknesses created by 60-kHz femtosecond laser according to different corneal thicknesses in the patients with low and moderate refractive error. A total of 182 eyes were divided according to the central corneal thickness (470μm–499 μm in Group A, 500μm–549 μm in Group B, and 550μm–599 μm in Group C) and underwent femtosecond laser-assisted LASIK for a target corneal flap thickness (100 μm for Group A, 110 μm for Group B, and 120 μm for Group C). Uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), and refractive status were examined. The flap thickness of each eye was measured by anterior segment optical coherence tomography (AS-OCT) on 30 points at 1-month follow-up to assess the accuracy and predictability. Postoperatively, at least 75% of eyes had a UDVA of 20/16 or better, less than 2% of eyes lost one line, over 30% of eyes gained one or more lines in CDVA, at least 95% of eyes had astigmatism of less than 0.25 D, all eyes achieved a correction within ±1.00 D from the target spherical equivalent refraction. The visual and refractive outcomes did not differ significantly in all groups (P >0.05). The mean flap thickness was 100.36± 4.32 μm (range: 95–113 μm) in Group A, 111.64 ± 3.62 μm (range: 108–125 μm) in Group B, and 122.32 ± 2.88 μm (range: 112–128 μm) in Group C. The difference at each measured point among the three groups was significant (P < 0.05). The accuracy and predictability were satisfactory in all three groups. In conclusion, this customized treatment yielded satisfactory clinical outcomes with accurate and predictable flap thickness for patients with low and moderate refractive error.     

Role of Suspended Fiber Structural Stiffness and Curvature on Single-Cell Migration,Nucleus Shape,and Focal-Adhesion-Cluster Length

It has been shown that cellular migration, persistence, and associated cytoskeletal arrangement are highly dependent on substrate stiffness (modulus: N/m² and independent of geometry), but little is known on how cells respond to subtle changes in local geometry and structural stiffness (N/m). Here, using fibers of varying diameter (400, 700, and 1200 nm) and length (1 and 2 mm) deposited over hollow substrates, we demonstrate that single mouse C2C12 cells attached to single suspended fibers form spindle morphologies that are sensitive to fiber mechanical properties. Over a wide range of increasing structural stiffness (2 to 100+ mN/m), cells exhibited decreases in migration speed and average nucleus shape index of ∼57% (from 58 to 25 μm/h) and ∼26% (from 0.78 to 0.58), respectively, whereas the average paxillin focal-adhesion-cluster (FAC, formed at poles) length increased by ∼38% (from 8 to 11 μm). Furthermore, the increase in structural stiffness directly correlates with cellular persistence, with 60% of cells moving in the direction of increasing structural stiffness. At similar average structural stiffness (25 ± 5 mN/m), cells put out longer FAC lengths on smaller diameters, suggesting a conservation of FAC area, and also exhibited higher nucleus shape index and migration speeds on larger-diameter fibers. Interestingly, cells were observed to deform fibers locally or globally through forces applied through the FAC sites and cells undergoing mitosis were found to be attached to the FAC sites by single filamentous tethers. These varied reactions have implications in developmental and disease biology models as they describe a strong dependence of cellular behavior on the cell’s immediate mechanistic environment arising from alignment and geometry of fibers.     

A new species of plasmodiidae (Coccidia: Hemosporidia) from the blood of the skink Scincus hemprichii (Scincidae: Reptilia) in Saudi Arabia

Fallisia arabica n. sp. was described from peripheral blood smears of the Skink lizard, Scincus hemprichii from Jazan Province in the southwest of Saudi Arabia. Schizogony and gametogony take place within neutrophils in the peripheral blood of the host. Mature schizont is rosette shaped 17.5 ± 4.1 × 17.0 ± 3.9 μm, with a L/W ratio of 1.03(1.02–1.05) μm and produces 24(18–26) merozoites. Young gametocytes are ellipsoidal, 5.5 ± 0.8 × 3.6 ± 0.5 μm, with a L/W of 1.53(1.44–1.61) μm. Mature macrogametocytes are ellipsoidal, 9.7 ± 1.2 × 7.8 ± 1.0 μm, with a L/W of 1.24(1.21–1.34) μm and microgametocytes are ellipsoidal, 7.0 ± 1.1 × 6.8 ± 0.9 μm. with a L/W of 1.03(1.01–1.10) μm. In comparison to the described Fallisia species, this new taxon has rosette schizonts and is larger than F. dominicensis, in Hispaniola, F. bipocrati, F. poecilopi, in Panama, F. thecadactyli in Venezuela, and F. effusa, F. simplex, F. modesta, in Brazil. F. arabica has fewer merozoites than F. effusa, F. poecilopi, F. thecadactyli and F. siamense in Thailand. This new species has more merozoites than F. dominicensis and F. modesta. All of these species belong to diverse saurian families (Agamidae, Gekkonidae, Polychrotidae, Scincidae and Teiidae) parasitize only thrombocytes or lymphocytes and some species parasitize immature erythroid cells and leucocytes.     

Effect of Sarcoplasmic Reticulum (SR) Calcium Content on SR Calcium Release Elicited by Small Voltage-Clamp Depolarizations in Frog Cut Skeletal Muscle Fibers Equilibrated with 20 mM EGTA

Cut muscle fibers from Rana temporaria (sarcomere length, 3.5–3.9 μm; 14–16°C) were mounted in a double Vaseline-gap chamber and equilibrated with an external solution that contained tetraethyl ammonium– gluconate and an internal solution that contained Cs as the principal cation, 20 mM EGTA, and 0 Ca. Fibers were stimulated with a voltage-clamp pulse protocol that consisted of pulses to −70, −65, −60, −45, and −20 mV, each separated by 400-ms periods at −90 mV. The change in total Ca that entered into the myoplasm (Δ[Ca_T]) and the Ca content of the SR ([Ca_SR]) were estimated with the EGTA/phenol red method (Pape, P.C., D.-S. Jong, and W.K. Chandler. 1995. J. Gen. Physiol. 106:259–336). Fibers were stimulated with the pulse protocol, usually every 5 min, so that the resting value of [Ca_SR] decreased from its initial value of 1,700–2,300 μM to values near or below 100 μM after 18–30 stimulations. Three main findings for the voltage pulses to −70, −65, and −60 mV are: (a) the depletion-corrected rate of Ca release (release permeability) showed little change when [Ca_SR] decreased from its highest level (>1,700 μM) to ∼1,000 μM; (b) as [Ca_SR] decreased below 1,000 μM, the release permeability increased to a maximum level when [Ca_SR] was near 300 μM that was on average about sevenfold larger than the values observed for [Ca_SR] > 1,000 μM; and (c) as [Ca_SR] decreased from ∼300 μM to <100 μM, the release permeability decreased, reaching half its maximum value when [Ca_SR] was ∼110 μM on average. It was concluded that finding b was likely due to a decrease in Ca inactivation, while finding c was likely due to a decrease in Ca-induced Ca release.     

Repeatability of Foveal Measurements Using Spectralis Optical Coherence Tomography Segmentation Software

Purpose

To investigate repeatability and reproducibility of thickness of eight individual retinal layers at axial and lateral foveal locations, as well as foveal width, measured from Spectralis spectral domain optical coherence tomography (SD-OCT) scans using newly available retinal layer segmentation software.

Methods

High-resolution SD-OCT scans were acquired for 40 eyes of 40 young healthy volunteers. Two scans were obtained in a single visit for each participant. Using new Spectralis segmentation software, two investigators independently obtained thickness of each of eight individual retinal layers at 0°, 2° and 5° eccentricities nasal and temporal to foveal centre, as well as foveal width measurements. Bland-Altman Coefficient of Repeatability (CoR) was calculated for inter-investigator and inter-scan agreement of all retinal measurements. Spearman''s ρ indicated correlation of manually located central retinal thickness (RT₀) with automated minimum foveal thickness (MFT) measurements. In addition, we investigated nasal-temporal symmetry of individual retinal layer thickness within the foveal pit.

Results

Inter-scan CoR values ranged from 3.1μm for axial retinal nerve fibre layer thickness to 15.0μm for the ganglion cell layer at 5° eccentricity. Mean foveal width was 2550μm ± 322μm with a CoR of 13μm for inter-investigator and 40μm for inter-scan agreement. Correlation of RT₀ and MFT was very good (ρ = 0.97, P < 0.0005). There were no significant differences in thickness of any individual retinal layers at 2° nasal compared to temporal to fovea (P > 0.05); however this symmetry could not be found at 5° eccentricity.

Conclusions

We demonstrate excellent repeatability and reproducibility of each of eight individual retinal layer thickness measurements within the fovea as well as foveal width using Spectralis SD-OCT segmentation software in a young, healthy cohort. Thickness of all individual retinal layers were symmetrical at 2°, but not at 5° eccentricity away from the fovea.     

Ocular Dominance Is Associated with the Ganglion Cell-Inner Plexiform Layer Thickness Profile in the Macula

Purpose

To investigate the characteristics of macular ganglion cell-inner plexiform layer (GCIPL) thickness profiles associated with ocular dominance.

Setting

Private practice, Seoul, Republic of Korea.

Design

Comparative case-control study.

Methods

Both eyes of 199 participants with no ophthalmic abnormalities were included. Participants were imaged by spectral-domain optical coherence tomography, and underwent dominant eye testing using a hole-in-a-card test (sighting dominance) at the same visit. Macular GCIPL, as well as circumpapillary retinal nerve fiber layer (RNFL) thickness were compared for individual patients, according to ocular dominance.

Results

Ocular dominance occurred predominantly in the right eye (right vs. left: 72.36 vs. 27.60%; P < 0.001). In the comparison of macular GCIPL thickness, the average (81.27±5.01 μm vs. 80.66±6.31 μm in dominant vs. non-dominant eyes), inferonasal (81.39±5.47μm vs. 80.33±6.82μm, and inferior sectors (77.95±6.05μm vs. 76.97±8.15μm) were significantly different between dominant and non-dominant eyes (P = 0.040, 0.005, and 0.032, respectively). Significant predictors of average GCIPL thickness were spherical equivalent (β = 1.37, P<0.001), astigmatic power (β = 1.44, P = 0.009), disc area (β = 3.90, P < 0.001), average RNFL thickness (β = 0.22, P<0.001), average cup-to-disc ratio (β = 5.74, P = 0.002), difference between the inferior and superior quadrant RNFL thicknesses (β = 0.08, P = 0.024), and ocular dominance (β = 2.10, P = 0.020). On multivariate regression analysis, ocular dominance was correlated with average GCIPL thickness after adjusting for potential confounders (β = 1.63, P = 0.048).

Conclusions

Dominant eyes accompanied significantly thicker average macular GCIPL. This information suggests that macular GCIPL thickness may provide an indicator of the relative dominance of an eye.     

Highly conserved modified nucleosides influence Mg2+-dependent tRNA folding

Transfer RNA structure involves complex folding interactions of the TΨC domain with the D domain. However, the role of the highly conserved nucleoside modifications in the TΨC domain, rT₅₄, Ψ₅₅ and m⁵C₄₉, in tertiary folding is not understood. To determine whether these modified nucleosides have a role in tRNA folding, the association of variously modified yeast tRNA^Phe T-half molecules (nucleosides 40–72) with the corresponding unmodified D-half molecule (nucleosides 1–30) was detected and quantified using a native polyacrylamide gel mobility shift assay. Mg²⁺ was required for formation and maintenance of all complexes. The modified T-half folding interactions with the D-half resulted in K_ds (rT₅₄ = 6 ± 2, m⁵C₄₉ = 11 ± 2, Ψ₅₅ = 14 ± 5, and rT₅₄,Ψ₅₅ = 11 ± 3 µM) significantly lower than that of the unmodified T-half (40 ± 10 µM). However, the global folds of the unmodified and modified complexes were comparable to each other and to that of an unmodified yeast tRNA^Phe and native yeast tRNA^Phe, as determined by lead cleavage patterns at U₁₇ and nucleoside substitutions disrupting the Levitt base pair. Thus, conserved modifications of tRNA’s TΨC domain enhanced the affinity between the two half-molecules without altering the global conformation indicating an enhanced stability to the complex and/or an altered folding pathway.     

The Structure of Mytilus Smooth Muscle and the Electrical Constants of the Resting Muscle

The individual muscle fibers of the anterior byssus retractor muscle (ABRM) of Mytilus edulis L. are uninucleate, 1.2–1.8 mm in length, 5 µm in diameter, and organized into bundles 100–200 µm in diameter, surrounded by connective tissue. Some bundles run the length of the whole muscle. Adjacent muscle cell membranes are interconnected by nexuses at frequent intervals. Specialized attachments exist between muscle fibers and connective tissue. Electrical constants of the resting muscle membrane were measured with intracellular recording electrodes and both extracellular and intracellular current-passing electrodes. With an intracellular current-passing electrode, the time constant τ, was 4.3 ± 1.5 ms. With current delivered via an extracellular electrode τ was 68.3 ± 15 ms. The space constant, λ, was 1.8 mm ± 0.4. The membrane input resistance, R_eff, ranged from 23 to 51 MΩ. The observations that values of τ depend on the method of passing current, and that the value of λ is large relative to fiber length and diameter are considered evidence that the individual muscle fibers are electrically interconnected within bundles in a three-dimensional network. Estimations are made of the membrane resistance, R_m, to compare the values to fast and slow striated muscle fibers and mammalian smooth muscles. The implications of this study in reinterpreting previous mechanical and electrical studies are discussed.     

STEREOLOGICAL ANALYSIS OF MAMMALIAN SKELETAL MUSCLE : I. Soleus Muscle of the Adult Guinea Pig

A quantitative analysis of the volumes, surface areas, and dimensions of the ultrastructural components in the soleus muscle fibers of the guinea pig was made by using point counting methods of stereology. Muscle fibers have structural orientation (anisotropy) and have spatial gradients of the structures within the fiber; therefore the standard stereological methods were modified where necessary. The entire analysis was repeated at two section orientations to test the modifications and identical results obtained from both. The volume of lipid droplets was 0.20 ± 0.06% (mean ± standard error, n = 5 animals) and the nuclei volume was 0.86 ± 0.20% of the fiber volume. The total mitochondrial volume was 4.85 ± 0.66% of the fiber volume with about one-third being found in an annulus within 1 µm of the sarcolemma. The mitochondrial volume in the remaining core of the fiber was 3.6 ± 0.4%. The T system has a volume of 0.14 ± 0.01% and a surface area of 0.064 ± 0.005 µm²/µm³ of the fiber volume. The surface area of the sarcolemma is 0.116 ± 0.013 µm²/µm³ which is twice the T system surface area. The volume of the entire sarcoplasmic reticulum is 3.52 ± 0.33% and the surface area is 0.97 ± 0.09 µm²/µm³. The sarcoplasmic reticulum is composed of the terminal cisternae whose volume is 1.04 ± 0.19% and surface area is 0.24 ± 0.05 µm²/µm³. The tubules of the sarcoplasmic reticulum in the I band and A band have volumes of 1.97 ± 0.24% and 0.51 ± 0.08%, and the surface areas of the I and A band reticulum are 0.56 ± 0.07 µm²/µm³ and 0.16 ± 0.04 µm²/µm³, respectively. The Z line width, myofibril and fiber diameters were measured.     

Skeletal muscle NAD(P)H two-photon fluorescence microscopy in vivo: topology and optical inner filters

Two-photon excitation fluorescence microscopy (TPEFM) permits the investigation of the topology of intercellular events within living animals. TPEFM was used to monitor the distribution of mitochondrial reduced nicotinamide adenine dinucleotide (NAD(P)H) in murine skeletal muscle in vivo. NAD(P)H fluorescence emission was monitored (~460 nm) using 710–720 nm excitation. High-resolution TPEFM images were collected up to a depth of 150 μm from the surface of the tibialis anterior muscle. The NAD(P)H fluorescence images revealed subcellular structures consistent with subsarcolemmal, perivascular, intersarcomeric, and paranuclear mitochondria. In vivo fiber typing between IIB and IIA/D fibers was possible using the distribution and content of mitochondria from the NAD(P)H fluorescence signal. The intersarcomeric mitochondria concentrated at the Z-line in the IIB fiber types resulting in a periodic pattern with a spacing of one sarcomere (2.34 ± 0.17 μm). The primary inner filter effects were nearly equivalent to water, however, the secondary inner filter effects were highly significant and dynamically affected the observed emission frequency and amplitude of the NAD(P)H fluorescence signal. These data demonstrate the feasibility, and highlight the complexity, of using NAD(P)H TPEFM in skeletal muscle to characterize the topology and metabolic function of mitochondria within the living mouse.