Structural analysis and reaction mechanism of the disproportionating enzyme (D‐enzyme) from potato

Starch produced by plants is a stored form of energy and is an important dietary source of calories for humans and domestic animals. Disproportionating enzyme (D‐enzyme) catalyzes intramolecular and intermolecular transglycosylation reactions of α‐1, 4‐glucan. D‐enzyme is essential in starch metabolism in the potato. We present the crystal structures of potato D‐enzyme, including two different types of complex structures: a primary Michaelis complex (substrate binding mode) for 26‐meric cycloamylose (CA26) and a covalent intermediate for acarbose. Our study revealed that the acarbose and CA26 reactions catalyzed by potato D‐enzyme involve the formation of a covalent intermediate with the donor substrate. HPAEC of reaction substrates and products revealed the activity of the potato D‐enzyme on acarbose and CA26 as donor substrates. The structural and chromatography analyses provide insight into the mechanism of the coupling reaction of CA and glucose catalyzed by the potato D‐enzyme. The enzymatic reaction mechanism does not involve residual hydrolysis. This could be particularly useful in preventing unnecessary starch degradation leading to reduced crop productivity. Optimization of this mechanism would be important for improvements of starch storage and productivity in crops.     

Three-dimensional structures of enzyme-substrate complexes of the hydroxynitrile lyase from Hevea brasiliensis.

The 3D structures of complexes between the hydroxynitrile lyase from Hevea brasiliensis (Hb-HNL) and several substrate and/or inhibitor molecules, including trichloracetaldehyde, hexafluoracetone, acetone, and rhodanide, were determined by X-ray crystallography. The complex with trichloracetaldehyde showed a covalent linkage between the protein and the inhibitor, which had apparently resulted from nucleophilic attack of the catalytic Ser80-Ogamma. All other complexes showed the substrate or inhibitor molecule merely hydrogen bonded to the protein. In addition, the native crystal structure of Hb-HNL was redetermined at cryo-temperature and at room temperature, eliminating previous uncertainties concerning residual electron density within the active site, and leading to the observation of two conserved water molecules. One of them was found to be conserved in all complex structures and appears to have mainly structural significance. The other water molecule is conserved in all structures except for the complex with rhodanide; it is hydrogen bonded to the imidazole of the catalytic His235 and appears to affect the Hb-HNL catalyzed reaction. The observed 3D structural data suggest implications for the enzyme mechanism. It appears that the enzyme-catalyzed cyanohydrin formation is unlikely to proceed via a hemiacetal or hemiketal intermediate covalently attached to the enzyme, despite the observation of such an intermediate for the complex with trichloracetaldehyde. Instead, the data are consistent with a mechanism where the incoming substrate is activated by hydrogen bonding with its carbonyl oxygen to the Ser80 and Thr11 hydroxy groups. A hydrogen cyanide molecule subsequently replaces a water molecule and is deprotonated presumably by the His235 base. Deprotonation is facilitated by the proximity of the positive charge of the Lys236 side chain.     

Modification of Escherichia coli DNA ligase by cleavage with trypsin.

Limited treatment of Escherichia coli DNA ligase with trypsin results in rapid loss of DNA joining activity. However, the ability to react with DPN to form the covalent enzyme-AMP intermediate is unaffected. The cleaved enzyme is also unable to catalyze the formation of DNA-adenylate, the second covalent intermediate in the ligase-catalyzed reaction. These findings demonstrate that portions of the DNA ligase molecule that are required for phosphodiester bond formation are not required for at least one of the partial reactions catalyzed by this enzyme.     

Catalytic features of the botulinum neurotoxin A light chain revealed by high resolution structure of an inhibitory peptide complex

The Clostridium botulinum neurotoxin serotype A light chain (BoNT/A-LC) is a Zn(II)-dependent metalloprotease that blocks the release of acetylcholine at the neuromuscular junction by cleaving SNAP-25, one of the SNARE proteins required for exocytosis. Because of the potential for use of the toxin in bioterrorism and the increasingly widespread application of the toxin in the medical field, there is significant interest in the development of small-molecule inhibitors of the metalloprotease. Efforts to design such inhibitors have not benefited from knowledge of how peptides bind to the active site since the enzyme-peptide structures available previously either were not occupied in the vicinity of the catalytic Zn(II) ion or did not represent the product of SNAP-25 substrate cleavage. Herein we report the 1.4 A-resolution X-ray crystal structure of a complex between the BoNT/A-LC and the inhibitory peptide N-Ac-CRATKML, the first structure of the light chain with an inhibitory peptide bound at the catalytic Zn(II) ion. The peptide is bound with the Cys S gamma atom coordinating the metal ion. Surprisingly, the cysteine sulfur is oxidized to the sulfenic acid form. Given the unstable nature of this species in solution, is it likely that oxidation occurs on the enzyme. In addition to the peptide-bound structure, we report two structures of the unliganded light chain with and without the Zn(II) cofactor bound at 1.25 and 1.20 A resolution, respectively. The two structures are nearly identical, confirming that the Zn(II) ion plays a purely catalytic role. Additionally, the structure of the Zn(II)-bound uncomplexed enzyme allows identification of the catalytic water molecule and a second water molecule that occupies the same position as the peptidic oxygen in the tetrahedral intermediate. This observation suggests that the enzyme active site is prearranged to stabilize the tetrahedral intermediate of the protease reaction.     

Structure and mechanism of HpcG, a hydratase in the homoprotocatechuate degradation pathway of Escherichia coli

HpcG catalyses the hydration of a carbon-carbon double bond without the aid of any cofactor other than a simple divalent metal ion such as Mg(2+). Since the substrate has a nearby carbonyl group, it is believed that it first isomerises to form a pair of conjugated double bonds in the enol tautomer before Michael addition of water. Previous chemical studies of the reaction, and that of the related enzyme MhpD, have failed to provide a clear picture of the mechanism. The substrate itself is unstable, preventing co-crystallisation or soaking of crystals, but oxalate is a strong competitive inhibitor. We have solved the crystal structure of the protein in the apo form, and with magnesium and oxalate bound. Modelling substrate into the active site suggests the attacking water molecule is not part of the metal coordination shell, in contrast to a previous proposal. Our model suggests that geometrically strained cis isomer intermediates do not lie on the reaction pathway, and that separate groups are involved in the isomerisation and hydration steps.     

Steric course of the hydration of D-gluco-octenitol catalyzed by alpha-glucosidases and by trehalase

Crystalline Aspergillus niger alpha-glucosidase and highly purified preparations of rice alpha-glucosidase II and Trichoderma reesei trehalase were found to catalyze the hydration of [2-(2)H]-D-gluco-octenitol, i.e., (Z)-3,7-anhydro-1,2-dideoxy-[2-2H]-D-gluco-oct-2-enitol, to yield 1,2-dideoxy-[2-2H]-D-gluco-octulose. In each case, the stereochemistry of the reaction was elucidated by examining the newly formed centers of asymmetry at C-2 and C-3 of the hydration product. The C-1 to C-3 fragment of each isolated [2-2H]-D-gluco-octulose product was recovered as [2-2H]propionic acid and identified by its positive optical rotatory dispersion as the S isomer, showing that each enzyme had protonated the octenitol (at C-2) from above its re face. 1H NMR spectra of enzyme/D-gluco-octenitol digests in D2O showed that the alpha-anomer of [2-2H]-D-gluco-octulose was exclusively produced by each alpha-glucosidase, whereas the beta-anomer was formed by action of the trehalase. The trans hydration catalyzed by the alpha-glucosidases was found to be very strongly inhibited by the substrate; the cis hydration reaction catalyzed by the trehalase showed no such inhibition. Special importance is attached to the finding that in hydrating octenitol each enzyme creates a product of the same anomeric form as in hydrolyzing an alpha-D-glucosidic substrate. This result adds substantially to the growing evidence that individual glycosylases create the configuration of their reaction products by a means that is independent of donor substrate configuration, that is, by a means other than "retaining" or "inverting" substrate configuration.     

Carbonic anhydrase catalyzes cyanamide hydration to urea: is it mimicking the physiological reaction?

 The interaction of human carbonic anhydrase (hCA) isozymes I and II with cyanamide, a linear molecule isoelectronic with the main physiological substrate of the enzyme, CO₂, was investigated through spectroscopic, kinetic, and X-ray crystallographic studies. We show here that cyanamide is hydrated to urea in the presence of CAs, and that it also acts as a weak non-competitive inhibitor (K _I=61±3 mM and 238±9 mM for hCA II and hCA I, respectively) towards the esterasic activity of these enzymes, as tested with 4-nitrophenyl acetate. Changes in the spectrum of the Co(II)-hCA II derivative observed in the presence of cyanamide suggest that it likely binds the metal ion within the CA active site, adding to the coordination sphere, not substituting the metal-bound solvent molecule. It thereafter undergoes a nucleophilic attack from the metal-bound hydroxide ion, forming urea which remains bound to the metal, as observed in the X-ray crystal structure of hCA II soaked in cyanamide solutions for several hours. The urea molecule is directly coordinated to the active site Zn(II) ion through a protonated nitrogen atom. Several hydrogen bonds involving active site residues Thr199 and Thr200 as well as three water molecules (Wat99, Wat122, and Wat123) further stabilize the urea-hCA II adduct. Kinetic studies in solution further proved that urea acts as a tight binding inhibitor of the two isozymes hCA I and hCA II, with very slow binding kinetics (k _on=2.5×10^–5s^–1M^–1). A mechanism to explain the hydration process of cyanamide by CAs, as well as the tight binding of urea in the active site, is also proposed based on the hypothesis that urea is deprotonated when bound to the enzyme. Cyanamide is thus the first true suicide substrate of this enzyme for which binding has been documented by means of X-ray crystallographic and spectroscopic studies. Received: 26 February 1999 / Accepted: 25 May 1999     

Crystal structure of human glyoxalase II and its complex with a glutathione thiolester substrate analogue.

BACKGROUND: Glyoxalase II, the second of two enzymes in the glyoxalase system, is a thiolesterase that catalyses the hydrolysis of S-D-lactoylglutathione to form glutathione and D-lactic acid. RESULTS: The structure of human glyoxalase II was solved initially by single isomorphous replacement with anomalous scattering and refined at a resolution of 1.9 A. The enzyme consists of two domains. The first domain folds into a four-layered beta sandwich, similar to that seen in the metallo-beta-lactamases. The second domain is predominantly alpha-helical. The active site contains a binuclear zinc-binding site and a substrate-binding site extending over the domain interface. The model contains acetate and cacodylate in the active site. A second complex was derived from crystals soaked in a solution containing the slow substrate, S-(N-hydroxy-N-bromophenylcarbamoyl)glutathione. This complex was refined at a resolution of 1.45 A. It contains the added ligand in one molecule of the asymmetric unit and glutathione in the other. CONCLUSIONS: The arrangement of ligands around the zinc ions includes a water molecule, presumably in the form of a hydroxide ion, coordinated to both metal ions. This hydroxide ion is situated 2.9 A from the carbonyl carbon of the substrate in such a position that it could act as the nucleophile during catalysis. The reaction mechanism may also have implications for the action of metallo-beta-lactamases.     

A catalytic mechanism revealed by the crystal structures of the imidazolonepropionase from Bacillus subtilis

Imidazolonepropionase (EC 3.5.2.7) catalyzes the third step in the universal histidine degradation pathway, hydrolyzing the carbon-nitrogen bonds in 4-imidazolone-5-propionic acid to yield N-formimino-l-glutamic acid. Here we report the crystal structures of the Bacillus subtilis imidazolonepropionase and its complex at 2.0-A resolution with substrate analog imidazole-4-acetic acid sodium (I4AA). The structure of the native enzyme contains two domains, a TIM (triose-phosphate isomerase) barrel domain with two insertions and a small beta-sandwich domain. The TIM barrel domain is quite similar to the members of the alpha/beta barrel metallo-dependent hydrolase superfamily, especially to Escherichia coli cytosine deaminase. A metal ion was found in the central cavity of the TIM barrel and was tightly coordinated to residues His-80, His-82, His-249, Asp-324, and a water molecule. X-ray fluorescence scan analysis confirmed that the bound metal ion was a zinc ion. An acetate ion, 6 A away from the zinc ion, was also found in the potential active site. In the complex structure with I4AA, a substrate analog, I4AA replaced the acetate ion and contacted with Arg-89, Try-102, Tyr-152, His-185, and Glu-252, further defining and confirming the active site. The detailed structural studies allowed us to propose a zinc-activated nucleophilic attack mechanism for the hydrolysis reaction catalyzed by the enzyme.     

Second step of hydrolytic dehalogenation in haloalkane dehalogenase investigated by QM/MM methods

Mechanistic studies on the hydrolytic dehalogenation catalyzed by haloalkane dehalogenases are of importance for environmental and industrial applications. Here, Car-Parrinello (CP) and ONIOM hybrid quantum-mechanical/molecular mechanics (QM/MM) are used investigate the second reaction step of the catalytic cycle, which comprises a general base-catalyzed hydrolysis of an ester intermediate (EI) to alcohol and free enzyme. We focus on the enzyme LinB from Sphingomonas paucimobilis UT26, for which the X-ray structure at atomic resolution is available. In agreement with previous proposals, our calculations suggest that a histidine residue (His272), polarized by glutamate (Glu132), acts as a base, accepting a proton from the catalytic water molecule and transferring it to an alcoholate ion. The reaction proceeds through a metastable tetrahedral intermediate, which shows an easily reversed reaction to the EI. In the formation of the products, the protonated aspartic acid (Asp108) can easily adopt conformation of the relaxed state found in the free enzyme. The overall free energy barrier of the reaction calculated by potential of the mean force integration using CP-QM/MM calculations is equal to 19.5 +/- 2 kcal . mol(-1). The lowering of the energy barrier of catalyzed reaction with respect to the water reaction is caused by strong stabilization of the reaction intermediate and transition state and their preorganization by electrostatic field of the enzyme.     

Theoretical investigation of the first-shell mechanism of acetylene hydration catalyzed by a biomimetic tungsten complex

The reaction mechanism of the hydration of acetylene to acetaldehyde catalyzed by [W^IVO(mnt)₂]²⁻ (where mnt²⁻ is 1,2-dicyanoethylenedithiolate) is studied using density functional theory. Both the uncatalyzed and the catalyzed reaction are considered to find out the origin of the catalysis. Three different models are investigated, in which an aquo, a hydroxo, or an oxo coordinates to the tungsten center. A first-shell mechanism is suggested, similarly to recent calculations on tungsten-dependent acetylene hydratase. The acetylene substrate first coordinates to the tungsten center in an η² fashion. Then, the tungsten-bound hydroxide activates a water molecule to perform a nucleophilic attack on the acetylene, resulting in the formation of a vinyl anion and a tungsten-bound water molecule. This is followed by proton transfer from the tungsten-bound water molecule to the newly formed vinyl anion intermediate. Tungsten is directly involved in the reaction by binding and activating acetylene and providing electrostatic stabilization to the transition states and intermediates. Three other mechanisms are also considered, but the associated energetic barriers were found to be very high, ruling out those possibilities.     

Kinetic parameters for the elimination reaction catalyzed by triosephosphate isomerase and an estimation of the reaction's physiological significance

Kinetic parameters for triosephosphate isomerase catalysis of the elimination reaction of an equilibrium mixture of dihydroxyacetone phosphate (DHAP) and D-glyceraldehyde-3-phosphate (DGAP) to form methylglyoxal and phosphate ion are reported for the enzyme from rabbit muscle. Pseudo-first-order rate constants for the disappearance of substrate (kelim) were determined for reactions at [Enzyme] much greater than [Substrate]. The second-order rate constant kEnz = 10.1 M-1 s-1 was determined from a plot of kelim against enzyme concentration. The kinetic parameters, determined from a steady-state kinetic analysis at [Substrate] much greater than [Enzyme], are kcat = 0.011 s-1, Km = 0.76 mM, and kcat/Km = 14 M-1 s-1. The estimated rate-constant ratio for partitioning of the enzyme-bound intermediate between protonation at carbon 2 and elimination, 1,000,000, is much larger than the ratio of 6.5 determined for the reaction of the enediolate phosphate in a loose complex with quinuclidinonium cation, a small buffer catalyst. There is a 10(5)-10(8)-fold decrease in the rate constant for the elimination reaction of the enediolate phosphate when this species binds to triosephosphate isomerase. The kinetic parameters for the elimination reaction catalyzed by the native triosephosphate isomerase and for the reaction catalyzed by a mutant form of the enzyme, which is missing a segment that forms hydrogen bonds with the phosphate group of substrate [Pompliano, D. L., Peyman, A., & Knowles, J. R. (1990) Biochemistry 29, 3186-3194] are similar.(ABSTRACT TRUNCATED AT 250 WORDS)     

Functional analysis of hyperthermophilic endocellulase from Pyrococcus horikoshii by crystallographic snapshots

A hyperthermophilic membrane-related β-1,4-endoglucanase (family 5, cellulase) of the archaeon Pyrococcus horikoshii was found to be capable of hydrolysing cellulose at high temperatures. The hyperthermophilic cellulase has promise for applications in biomass utilization. To clarify its detailed function, we determined the crystal structures of mutants of the enzyme in complex with either the substrate or product ligands. We were able to resolve different kinds of complex structures at 1.65-2.01?? (1??=0.1?nm). The structural analysis of various mutant enzymes yielded a sequence of crystallographic snapshots, which could be used to explain the catalytic process of the enzyme. The substrate position is fixed by the alignment of one cellobiose unit between the two aromatic amino acid residues at subsites +1 and +2. During the enzyme reaction, the glucose structure of cellulose substrates is distorted at subsite -1, and the β-1,4-glucoside bond between glucose moieties is twisted between subsites -1 and +1. Subsite -2 specifically recognizes the glucose residue, but recognition by subsites +1 and +2 is loose during the enzyme reaction. This type of recognition is important for creation of the distorted boat form of the substrate at subsite -1. A rare enzyme-substrate complex was observed within the low-activity mutant Y299F, which suggested the existence of a trapped ligand structure before the formation by covalent bonding of the proposed intermediate structure. Analysis of the enzyme-substrate structure suggested that an incoming water molecule, essential for hydrolysis during the retention process, might be introduced to the cleavage position after the cellobiose product at subsites +1 and +2 was released from the active site.     

Multifunctional catalysis by metal complexes: 1. Ester hydrolysis catalyzed by oximinatozinc(II) ions

Hydrolysis of p-nitrophenyl acetate catalyzed by a Zn(II) complex of 2-acetylpyridineketoxime or 2-pyridinecarboxaldoxime was studied as a model of multifunctional catalysis by metalloproteases. The reaction proceeded exclusively through the formation of an acylcatalyst intermediate under the experimental conditions, and both the formation and the breakdown of the acyl intermediate were much faster than the spontaneous reaction. The metal ion, the metal-bound water molecule or hydroxide ion, the oximate ion, and general bases contributed to the multifunctional catalysis in ester hydrolysis by the oximinatozinc(II) ions.     

Crystal structures of the key anaerobic enzyme pyruvate:ferredoxin oxidoreductase, free and in complex with pyruvate

Oxidative decarboxylation of pyruvate to form acetyl-coenzyme A, a crucial step in many metabolic pathways, is carried out in most aerobic organisms by the multienzyme complex pyruvate dehydrogenase. In most anaerobes, the same reaction is usually catalyzed by a single enzyme, pyruvate:ferredoxin oxidoreductase (PFOR). Thus, PFOR is a potential target for drug design against certain anaerobic pathogens. Here, we report the crystal structures of the homodimeric Desulfovibrio africanus PFOR (data to 2.3 A resolution), and of its complex with pyruvate (3.0 A resolution). The structures show that each subunit consists of seven domains, one of which affords protection against oxygen. The thiamin pyrophosphate (TPP) cofactor and the three [4Fe-4S] clusters are suitably arranged to provide a plausible electron transfer pathway. In addition, the PFOR-pyruvate complex structure shows the noncovalent fixation of the substrate before the catalytic reaction.     

Isolation and incorporation of rabbit liver epoxide hydrase into phospholipid vesicles.

Methods are described for the incorporation into phospholipid vesicles of epoxide hydrase isolated from liver microsomes of phenobarbital-treated rabbits. Chromatography on a Sephadex G-50 column of epoxide hydrase and egg yolk phosphatidylcholine treated with sodium cholate yielded homogeneous vesicles with a diameter of about 25 nm and containing 80 to 85% of the protein applied. At high substrate concentrations, the vesicles catalyzed the hydration of benzo(a)pyrene-4,5-oxide and styrene-7,8-epoxide at a rate similar to that obtained with the enzyme in a soluble form. However, the kinetics of styrene glycol formation catalyzed by the vesicular or microsomal preparations were complex. Convex Lineweaver-Burk plots and concave Hill plots were obtained, whereas normal Michaelis-Menten kinetics characterized the hydration catalyzed by the enzyme in a soluble form. The results could be explained if reconstitution of the enzyme into the vesicles gives rise to low affinity high capacity sites for the substrate on the enzyme, or alternatively facilitates the interaction of the substrate with such sites already present. It is suggested that reconstituted liposomes containing both the liver microsomal hydroxylase system and epoxide hydrase may prove to be a good model system for evaluating substrate specificity and factors of importance in the formation of toxic and carcinogenic metabolites by these enzymes.     

Directed evolution of the promiscuous esterase activity of carbonic anhydrase II

A promiscuous activity of an existing enzyme can confer an evolutionary advantage by providing an immediate response to a new selection pressure and a starting point for the divergence of a new enzyme. This work seeks to examine how this process might take place. Human carbonic anhydrase II (hCAII) is an enzyme that evolved to catalyze the reversible hydration of CO(2) and performs this task at a remarkable rate (k(cat) approximately 10(6) s(-)(1)). hCAII also exhibits promiscuous activity toward highly activated esters such as 4-nitrophenyl acetate. We describe a much weaker esterase activity of hCAII toward the bulkier and much less activated ester substrate 2-naphthyl acetate (2NA). Directed evolution of hCAII produced a variant with 40-fold higher rates toward 2NA, owing to two mutations: one within the active site (Ala65Val) and one at its mouth (Thr200Ala). Structure-activity studies suggest that these mutations led to adaptation of the active site for bulkier substrates and for the catalysis of nonactivated esters. The mutations did not, however, significantly alter the native activity of hCAII. Our results support the notion that the evolution of a new function can be driven by mutations that increase a promiscuous function (which serves as the starting point for the evolutionary process) but do not harm the native function.     

Substitution of Glu122 by Glutamine Revealed the Function of the Second Water Molecule as a Proton Donor in the Binuclear Metal Enzyme Creatininase

Creatininase is a binuclear zinc enzyme and catalyzes the reversible conversion of creatinine to creatine. It exhibits an open-closed conformational change upon substrate binding, and the differences in the conformations of Tyr121, Trp154, and the loop region containing Trp174 were evident in the enzyme-creatine complex when compared to those in the ligand-free enzyme. We have determined the crystal structure of the enzyme complexed with a 1-methylguanidine. All subunits in the complex existed as the closed form, and the binding mode of creatinine was estimated. Site-directed mutagenesis revealed that the hydrophobic residues that show conformational change upon substrate binding are important for the enzyme activity.We propose a catalytic mechanism of creatininase in which two water molecules have significant roles. The first molecule is a hydroxide ion (Wat1) that is bound as a bridge between the two metal ions and attacks the carbonyl carbon of the substrate. The second molecule is a water molecule (Wat2) that is bound to the carboxyl group of Glu122 and functions as a proton donor in catalysis. The activity of the E122Q mutant was very low and it was only partially restored by the addition of ZnCl₂ or MnCl₂. In the E122Q mutant, k_cat is drastically decreased, indicating that Glu122 is important for catalysis. X-ray crystallographic study and the atomic absorption spectrometry analysis of the E122Q mutant-substrate complex revealed that the drastic decrease of the activity of the E122Q was caused by not only the loss of one Zn ion at the Metal1 site but also a critical function of Glu122, which most likely exists for a proton transfer step through Wat2.     

Structure and mechanism of chitin deacetylase from the fungal pathogen Colletotrichum lindemuthianum

The fungal pathogen Colletotrichum lindemuthianum secretes an endo-chitin de-N-acetylase (ClCDA) to modify exposed hyphal chitin during penetration and infection of plants. Although a significant amount of biochemical data is available on fungal chitin de-N-acetylases, no structural data exist. Here we describe the 1.8 A crystal structure of a ClCDA product complex and the analysis of the reaction mechanism using Hammett linear free energy relationships, subsite probing, and atomic absorption spectroscopy studies. The structural data in combination with biochemical data reveal that ClCDA consists of a single domain encompassing a mononuclear metalloenzyme which employs a conserved His-His-Asp zinc-binding triad closely associated with the conserved catalytic base (aspartic acid) and acid (histidine) to carry out acid/base catalysis. The data presented here indicate that ClCDA possesses a highly conserved substrate-binding groove, with subtle alterations that influence substrate specificity and subsite affinity. Strikingly, the structure also shows that the hexahistidine purification tag appears to form a tight interaction with the active site groove. The enzyme requires occupancy of at least the 0 and +1 subsites by (GlcNAc)(2) for activity and proceeds through a tetrahedral oxyanion intermediate.     

Hydrolysis of aryl beta-D-glucopyranosides and beta-D-xylopyranosides by an induced beta-D-glucosidase from Stachybotrys atra.

The induced beta-D-glucosidase from Stachybotrys atra hydrolyzes aryl beta-D-glucopyranosides and aryl beta-D-xylopyranosides by the same basic two-step mechanism. In the first step the aglycon group is split of with simultaneous formation of an enzyme-glycosyl complex. In the second step this intermediate complex reacts with water yeilding beta-D-glucose or beta-D-xylose. For beta-D-xyloside hydrolysis each of the two steps is partially rate-controlling, whereas for beta-D-glucoside hydrolysis the second step is rate-limiting. The enzyme is inhibited by high concentrations of substrate and the exact rate-concentration equation is a second-order equation. 1-Thio-beta-D-glycopyranosides with an aromatic aglycon inhibit the reaction in both a competitive and non-competitive way. A tentative mechanism is proposed to explain all types of inhibition. In this mechanism substrates and inhibitors with an aromatic aglycon group bind through hydrophobic forces to the 'aglycon subsite' of the intermediate enzyme-glycosyl complex. Binding of the second substrate molecule or of the inhibitor to this complex does not prevent the reaction of the glycosyl moiety with water, it only decreases the rate of the second step.