Purification of a thermostable laccase from Leucaena leucocephala using a copper alginate entrapment approach and the application of the laccase in dye decolorization

Laccase from a tree legume, Leucaena leucocephala, was purified to homogeneity using a quick two-step procedure: alginate bead entrapment and celite adsorption chromatography. Laccase was purified 110.6-fold with an overall recovery of 51.0% and a specific activity of 58.5 units/mg. The purified laccase was found to be a heterodimer (∼220 kDa), containing two subunits of 100 and 120 kDa. The affinity of laccase was found to be highest for catechol and lowest for hydroquinone, however, highest K_cat and K_cat/K_m were obtained for hydroquinone. Purified laccase exhibited pH and temperature optima of 7.0 and 80 °C, respectively. Mn²⁺, Cd²⁺, Fe²⁺, Cu²⁺ and Na⁺ activated laccase while Ca²⁺ treatment increased laccase activity up to 3 mM, beyond which it inhibited laccase. Co²⁺, Hg²⁺, DTT, SDS and EDTA showed an inhibition of laccase activity. The Leucaena laccase was found to be fairly tolerant to organic solvents; upon exposure for 1 h individually to 50% (v/v) each of ethanol, DMF, DMSO and benzene, more than 50% of the activity was retained, while in the presence of 50% (v/v) each of methanol, isopropanol and chloroform, a 40% residual activity was observed. The purified laccase efficiently decolorized synthetic dyes such as indigocarmine and congo red in the absence of any redox mediator.     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

The modification of glucose levels and N source in the Hungate's medium to stimulate the production of fibrolytic enzymes of Anaeromyces sp. YQ3 grown on corn stalks

Hungate's method is a well-accepted protocol for the isolation or incubation of anaerobes with a roll tube technique. The aim of this study was to stimulate fungal enzyme production by optimizing the components of Hungate's medium for the growth of a rumen fungus Anaeromyces sp. YQ3. The organism was grown on corn stalks and incubated for 10 days in defined media with two glucose levels (G⁺, glucose in the Hungate's medium as a glucose control; G^?, glucose removed in a modified Hungate's medium) and four N sources (N1: yeast extract + tryptone + (NH₄)₂SO₄ in Hungate's medium (control); N2: yeast extract + (NH₄)₂SO₄; N3: tryptone + (NH₄)₂SO₄; and N4: tryptone + yeast extract). In the G^? media, the recovered activities of feruloyl esterase (FAE) (P<0.0001), acetyl esterase (AE) (P=0.0065) and xylanase (P<0.0001) were decreased, while the G⁺ media with N1 nitrogen stimulated the production of FAE and xylanase (P<0.0001). The G^? medium with N2 nitrogen increased the recovered activities of carboxymethyl cellulase (P=0.0001) and avicelase (P<0.0001), while the N3 and N4 media increased the recovered activity of AE (P=0.0015). The N4 medium was comparable to the N1 medium in stimulating the amount of recovered xylanase activity. The activities of FAE (P<0.0001), AE (P<0.0001), and xylanase (P<0.0001) showed a time-dependent increase and reached their peaks at day 10, while the avicelase activity peaked at day 8 (P=0.0071). The esterase activities (FAE and AE) were positively correlated with the enzyme activities of xylanase and carboxymethyl cellulase (r > 0.48, P<0.05). After a 10-day incubation, the glucose in the Hungate's media contributed to an increase in organic matter disappearance (P<0.0001) and volatile fatty acid (VFA) concentration (P<0.0001), except for molar acetate proportions. The N4 treatment increased organic matter disappearance and total VFA concentration (P=0.0002). The change in N source did not alter molar proportions of acetate, propionate and valerate, while the N2 treatment increased molar butyrate proportion (P<0.0035), and both N2 and N3 increased the molar proportion of branched chain VFAs (P<0.0041). In summary, the glucose in the Hungate's medium is beneficial for stimulating the production of esterases and xylanase, thereby promoting fungal growth. Amending the N source in Hungate's medium brings about different yields of rumen fungal esterases and polysaccharide hydrolases that have important nutritional impacts on fibre degradation in ruminant animals.     

Purification and characterization of a novel α-amylase from a newly isolated Bacillus methylotrophicus strain P11-2

An aerobic bacterial strain P11-2 with high amylolytic activity was isolated from soil sample collected from wheat field of Jiyuan, China. The strain was identified as Bacillus methylotrophicus by morphological and physiological characteristics as well as by analysis of the gene encoding the 16S rRNA. The α-amylase was purified to homogeneity by a combination of 80% (NH₄)₂SO₄ precipitation, DEAE FF anion exchange, and superdex 75 10/300 GL gel filtration chromatography. The purified α-amylase exhibited specific activity of 330.7 U/mg protein that corresponds to 13.1 fold purification. The relative molecular mass of the α-amylase was 44.0 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The optimal pH and temperature for enzyme activity were 7.0 and 70 °C, respectively. The α-amylase activity was stimulated by Mg²⁺, Ba²⁺, Al³⁺ and dl-dithiothreitol (DTT), however, Ca²⁺ almost had no activation or inhibition on the α-amylase. After 4 h of reaction toward soluble starch, the end products were glucose, maltose and maltotriose. The 10 residues of the N-terminal sequence of the purified α-amylase were SVKNGQILHA, which showed no homology to other reported α-amylases from Bacillus strain.     

Purification and characterization of two thermostable laccases with high cold adapted characteristics from Pycnoporus sp. SYBC-L1

The white-rot fungus Pycnoporus sp. SYBC-L1 produced large amount of laccase in submerged fermentation. Two laccase isozymes (LacI and LacII) were purified using (NH₄)₂SO₄ fractionation, DEAE-cellulose and Sephadex G-100 column chromatography. The molecular masses of LacI and Lac II were 55.89 and 63.07 kDa, respectively by SDS-PAGE. Both the laccases showed acidic pH optima and high catalytic activities at low temperature for oxidations of 2,6-dimethoxyphenol (DMP), 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonate acid) (ABTS), syringaldazine and guaiacol. LacI and LacII were not only with high cold adaptation, but also fairly stable at high temperature. The half-lives of LacI at 50, 60 and 70 °C were 69.31, 2.58 and 0.13 h, respectively, whereas LacII was more stable with half-lives of 256.72, 21.00 and 2.06 h respectively. The best substrates for the enzymes were both found to be ABTS, in which the K_m values of LacI and LacII were 0.0166 and 0.0435 mM and the catalytic efficiencies were 19640.36 and 31172.64 S⁻¹ mM⁻¹, respectively. EDTA and low concentration of Cu²⁺ and Mn²⁺ almost had non-inhibitions on their activities. LacII with syringaldehyde efficiently decolorized Remazol Brilliant Blue R. The high thermostabilities as well as cold adapted properties made Pycnoporus sp. SYBC-L1 laccases to be excellent candidates in harsh industry.     

Purification of a laccase from fungus combs in the nest of Odontotermes formosanus

A new enzyme was isolated from the fungus combs in the nest of Odontotermes formosanus and identified as a laccase. The single laccase was purified with a purification factor of 16.83 by ammonium sulphate precipitation and anion exchange chromatography, to a specific activity of 211.11 U mg⁻¹. Its molecular mass was 65 kDa. The optimum pH value and temperature were 4.0 °C and 10 °C with ABTS as the substrate, respectively. The enzyme activity stabilized at temperatures between 10 °C and 30 °C and decreased rapidly when the temperature was above 30 °C. The V_max and K_m values were 3.62 μmol min⁻¹ mg⁻¹ and 119.52 μM, respectively. Ethanol concentration affected laccase activity, inhibiting 60% of enzyme activity at a concentration of 70%. Metal ions of Mg²⁺, Ba²⁺ and Fe²⁺ showed inhibition on enzyme activity of 17.2%, 5.3% and 9.4%, respectively, with the increase of metal ions concentration from 1 mM to 5 mM. Especially Fe²⁺ strongly inhibited enzyme activity up to 89% inhibition at a concentration of 1 mM.     

Proton production from nitrogen transformation drives stream export of base cations in acid-sensitive forested watersheds

The biogeochemical cycles of nitrogen (N) and base cations (BCs), (i.e., K⁺, Na⁺, Ca²⁺, and Mg²⁺), play critical roles in plant nutrition and ecosystem function. Empirical correlations between large experimental N fertilizer additions to forest ecosystems and increased BCs loss in stream water are well demonstrated, but the mechanisms driving this coupling remain poorly understood. We hypothesized that protons generated through N transformation (PPR_N)—quantified as the balance of NH₄⁺ (H⁺ source) and NO₃⁻ (H⁺ sink) in precipitation versus the stream output will impact BCs loss in acid-sensitive ecosystems. To test this hypothesis, we monitored precipitation input and stream export of inorganic N and BCs for three years in an acid-sensitive forested watershed in a granite area of subtropical China. We found the precipitation input of inorganic N (17.71 kg N ha⁻¹ year⁻¹ with 54% as NH₄⁺–N) was considerably higher than stream exported inorganic N (5.99 kg N ha⁻¹ year⁻¹ with 83% as NO₃⁻–N), making the watershed a net N sink. The stream export of BCs (151, 1518, 851, and 252 mol ha⁻¹ year⁻¹ for K⁺, Na⁺, Ca²⁺, and Mg²⁺, respectively) was positively correlated (r = 0.80, 0.90, 0.84, and 0.84 for K⁺, Na⁺, Ca²⁺, and Mg²⁺ on a monthly scale, respectively, P < 0.001, n = 36) with PPR_N (389 mol ha⁻¹ year⁻¹) over the three years, suggesting that PPR_N drives loss of BCs in the acid-sensitive ecosystem. A global meta-analysis of 15 watershed studies from non-calcareous ecosystems further supports this hypothesis by showing a similarly strong correlation between ∑BCs output and PPR_N (r = 0.89, P < 0.001, n = 15), in spite of the pronounced differences in environmental settings. Collectively, our results suggest that N transformations rather than anions (NO₃⁻ and/or SO₄²⁻) leaching specifically, are an important mediator of BCs loss in acid-senstive ecosystems. Our study provides the first definitive evidence that the chronic N deposition and subsequent transformation within the watershed drive stream export of BCs through proton production in acid-sensitive ecosystems, irrespective of their current relatively high N retention. Our findings suggest the N-transformation-based proton production can be used as an indicator of watershed outflow quality in the acid-sensitive ecosystems.     

Synthesis of 1-(methanesulfonyl- and aminosulfonylphenyl)acetylenes that possess a 2-(N-difluoromethyl-1,2-dihydropyridin-2-one) pharmacophore: Evaluation as dual inhibitors of cyclooxygenases and 5-lipoxygenase with anti-inflammatory activity

A hitherto unknown class of linear acetylene regioisomers were designed such that a SO₂Me or SO₂NH₂ group was located at the ortho-, meta- or para-position of the acetylene C-1 phenyl ring, and a N-difluoromethyl-1,2-dihydropyridin-2-one moiety was attached via its C-5 position to the C-2 position on an acetylene template (scaffold). All three SO₂Me regioisomers, and the 4-SO₂NH₂ analog, were potent inhibitors of 5-lipoxygenase (5-LOX IC₅₀ = 3.2–3.5 μM range) relative to the reference drug caffeic acid (IC₅₀ = 4.0 μM). The SO₂Me regioisomers exhibited weak cyclooxygenease-1 (COX-1) and -2 (COX-2) inhibitory activity with a modest COX-2 selectivity index. The most potent 3-SO₂Me, 4-SO₂Me and 4-SO₂NH₂ compounds, with respective ED₅₀ values of 66.1, 68.5 and 86.5 mg/kg po, exhibited comparable oral anti-inflammatory (AI) activity to that of the reference drug ibuprofen (ED₅₀ = 67.4 mg/kg po). The N-difluoromethyl-1,2-dihydropyridin-2-one moiety provides a novel pharmacophore for the design of cyclic hydroxamic mimetics capable of inhibiting 5-LOX for exploitation in the development of 5-LOX inhibitory AI drugs.     

Two ways to achieve an anammox influent from real reject water treatment at lab-scale: Partial SBR nitrification and SHARON process

A comparative study to produce the correct influent for Anammox process from anaerobic sludge reject water (700–800 mg NH₄⁺-N L⁻¹) was considered here. The influent for the Anammox process must be composed of NH₄⁺-N and NO₂⁻-N in a ratio 1:1 and therefore only a partial nitrification of ammonium to nitrite is required. The modifications of parameters (temperature, ammonium concentration, pH and solid retention time) allows to achieve this partial nitrification with a final effluent only composed by NH₄⁺-N and NO₂⁻-N at the right stoichiometric ratio. The equal ratio of HCO₃⁻/NH₄⁺ in reject water results in a natural pH decrease when approximately 50% of NH₄⁺ is oxidised. A Sequencing batch reactor (SBR) and a chemostat type of reactor (single-reactor high activity ammonia removal over nitrite (SHARON) process) were studied to obtain the required Anammox influent. At steady state conditions, both systems had a specific conversion rate around 40 mg NH₄⁺-N g⁻¹ volatile suspended solids (VSS) h⁻¹, but in terms of absolute nitrogen removal the SBR conversion was 1.1 kg N day⁻¹ m⁻³, whereas in the SHARON chemostat was 0.35 kg N day⁻¹ m⁻³ due to the different hydraulic retention time (HRT) used. Both systems are compared from operational (including starvation experiments) and kinetic point of view and their advantages/disadvantages are discussed.     

Production,characterization and application of a keratinase from Chryseobacterium L99 sp. nov.

Keratins are important bioresources for apparels and feedstuffs, but recalcitrant to common enzymes. Now, it is popular and essential to develop keratinolytic enzymes for environmental prevention and improvement of keratin product quality. In the study, the medium optimization, purification, characterization and application of the keratinase from a newly isolated Chryseobacterium L99 sp. nov. were conducted. Exogenous sucrose, malt sugar, glucose, starch, tryptone, Mg²⁺, Zn²⁺, Ca²⁺ and Cu²⁺ could promote the keratinase production, while exogenous urea, NH₄Cl and yeast extract exhibited strong inhibition effects. Response surface methodology predicted a maximum keratinase yield of 213.8 U mL⁻¹, at (g L⁻¹) sucrose 16.8, MgCl₂·6H₂O 1.9, feather keratin 40.0, NaH₂PO₄·2H₂O 6.0 and K₂HPO₄·6H₂O 1.0, where dry cell weight nearly had a minimum 8.58 g L⁻¹. Then, a serine keratinase about 33 kDa was purified, and its optimal activity was acquired at 40 °C and pH 8.0 with K⁺, Zn²⁺or Co²⁺. Compared with Savinase 16 L and transglutaminase, the L99 keratinase could efficient prevent shrinkage and eliminate directional frictional effect of wool, indicating it as a promising prospect in the biotreatment of wool fibres.     

Adsorption characteristics of sulfur powder by bamboo charcoal to restrain sulfur allergies

Exposures to particulate matter with a diameter of 2.5 μm or less (PM2.5) may influence the risk of birth defects and make you allergic, which causes serious harm to human health. Bamboo charcoal can adsorb harmful substances,that was of benefitto people’s health. In order to figure out the optimal adsorbtion condition and the intrinsic change of bamboo charcoal, five chemicals were adsorbed by bamboo charcoal and were analyzed by FT-IR. The optimal blast time was 80 min of Na₂SO₃, 100 min of Na₂S₂O₈, 20 min of Na₂SO₄, 120 min of Fe₂(SO₄)₃ and 60 min or 100 min of S. FT-IR spectra showed that bamboo charcoal had five characteristic peaks of SS stretch, H₂O stretch, OH stretch, CO stretch or CC stretch, and NO₂ stretch at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹, respectively. For Na₂SO₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 20 min. For Na₂S₂O₈, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Na₂SO₄, the peaks at 3850 cm⁻¹, 3740 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Fe₂(SO₄)₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 120 min. For S, the peaks at 3850 cm⁻¹ and 3740 cm⁻¹ achieved the maximum at 40 min, the peaks at 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. It proved that bamboo charcoal could remove sulfur powder from air to restrain sulfur allergies.     

Alkaline lipase from a novel strain Burkholderia multivorans: Statistical medium optimization and production in a bioreactor

An alkaline lipase from Burkholderia multivorans was produced within 15 h of growth in a 14 L bioreactor. An overall 12-fold enhanced production (58 U mL⁻¹ and 36 U mg⁻¹ protein) was achieved after medium optimization following the “one-variable-at-a-time” and the statistical approaches. The optimal composition of the lipase production medium was determined to be (% w/v or v/v): KH₂PO₄ 0.1; K₂HPO₄ 0.3; NH₄Cl 0.5; MgSO₄·7H₂O 0.01; yeast extract 0.36; glucose 0.1; olive oil 3.0; CaCl₂ 0.4 mM; pH 7.0; inoculum density 3% (v/v) and incubation time 36 h in shake flasks. Lipase production was maximally influenced by olive oil/oleic acid as the inducer and yeast extract as the additive nitrogen. Plackett–Burman screening suggested catabolite repression by glucose. Amongst the divalent cations, Ca²⁺ was a positive signal while Mg²⁺ was a negative signal for lipase production. RSM predicted that incubation time, inoculum density and oil were required at their higher levels (36 h, 3% (v/v) and 3% (v/v), respectively) while glucose and yeast extract were required at their minimal levels for maximum lipase production in shake flasks. The production conditions were validated in a 14 L bioreactor where the incubation time was reduced to 15 h.     

Bioelectricity generation using two chamber microbial fuel cell treating wastewater from food processing

Electricity generation from microbial fuel cells which treat food processing wastewater was investigated in this study. Anaerobic anode and aerobic cathode chambers were separated by a proton exchange membrane in a two-compartment MFC reactor. Buffer solutions and food industry wastewater were used as electrolytes in the anode and cathode chambers, respectively. The produced voltage and current intensity were measured using a digital multimeter. Effluents from the anode compartment were tested for COD, BOD₅, NH₃, P, TSS, VSS, SO₄ and alkalinity. The maximum current density and power production were measured 527 mA/m² and 230 mW/m² in the anode area, respectively, at operation organic loading (OLR) of 0.364 g COD/l.d. At OLR of 0.182 g COD/l.d, maximum voltage and columbic efficiency production were recorded 0.475 V and 21%, respectively. Maximum removal efficiency of COD, BOD₅, NH₃, P, TSS, VSS, SO₄ and alkalinity were 86, 79, 73, 18, 68, 62, 30 and 58%, respectively. The results indicated that catalysts and mediator-less microbial fuel cells (CAML-MFC) can be considered as a better choice for simple and complete energy conversion from the wastewater of such industries and also this could be considered as a new method to offset wastewater treatment plant operating costs.     

Purification and characterization of yellow laccase from Trametes hirsuta MTCC-1171 and its application in synthesis of aromatic aldehydes

A yellow laccase from the culture filtrate of Trametes hirsuta MTCC-1171 has been purified. The purification methods involved concentration of the culture filtrate by ammonium sulphate precipitation and an anion exchange chromatography on diethylaminoethyl cellulose. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and native polyacrylamide gel electrophoresis gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the enzyme determined from SDS-PAGE analysis was 55.0 kDa. Using 2,6-dimethoxyphenol, 2,2′[azino-bis-(3-ethylbonzthiazoline-6-sulphonic acid) diammonium salt] and 3,5-dimethoxy-4-hydroxybenzaldehyde azine as the substrates, the K_m, k_cat and k_cat/K_m values of the laccase were found to be 420 μM, 13.04 s⁻¹, 3.11 × 10⁴ M⁻¹ s⁻¹, 225 μM, 13.03 s⁻¹, 1.3 × 10⁵ M⁻¹ s⁻¹ and 100 μM, 13.04 s⁻¹, 5.8 × 10⁴ M⁻¹ s⁻¹, respectively. The pH and temperature optima were 4.5 and 60 °C, respectively while pH and temperature stabilities were pH 4.5 and 50 °C. The activation energy for thermal denaturation of the enzyme was 18.6 kJ/mol/K. The purified laccase has yellow colour and does not show absorption band around 610 nm like blue laccases. The purified laccase transforms toluene, 3-nitrotoluene, 4-nitrotoluene, 3-chlorotoluene, 4-chlorotoluene and 3,4-dimethoxytoluene to benzaldehyde, 3-nitrobenzaldehyde, 4-nitrobenzaldehyde, 3-chlorobenzaldehyde, 4-chlorobenzaldehyde and 3,4-dimethoxybenzaldehyde in the absence of mediator molecules in high yields.     

Heterologous production of a temperature and pH-stable laccase from Bacillus vallismortis fmb-103 in Escherichia coli and its application

To enhance laccase yield, the laccase gene from Bacillus vallismortis fmb-103 was cloned and heterologously expressed in Escherichia coli BL21 (DE3) cells. The auto-induction strategy was applied during fermentation, and the process was controlled, as follows: Cu²⁺ was added when the optical density at 600 nm (OD₆₀₀) was 0.3, the fermentation temperature was adjusted to 16 °C when the OD₆₀₀ was 0.9, and fermentation was stopped after 50 h. The yield of recombinant laccase was up to 3420 U/L, as assayed by 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid). Recombinant laccase was purified 4.47-fold by heating for 10 min at 70 °C and dialyzing against 50–60% ammonium sulfate, retained more than 50% activity after 10 h at 70 °C, and demonstrated broad pH stability. Malachite green was efficiently degraded by recombinant laccase, especially in combination with mediators. These results provided a basis for the future application of recombinant laccase to malachite green degradation.     

Molecular design,synthesis and biological evaluation of cyclic imides bearing benzenesulfonamide fragment as potential COX-2 inhibitors. Part 2

A group of cyclic imides (1–10) was designed for evaluation as a selective COX-2 inhibitors and investigated in vivo for their anti-inflammatory activity. Compounds 6a, 6b, 8a, 8b, 9a, 9b, 10a and 10b were proved to be potent COX-2 inhibitors with IC₅₀ range of 0.1–4.0 μM. In vitro COX-1/COX-2 inhibition structure–activity studies identified compound 8a as a highly potent (IC₅₀ = 0.1 μM), and an extremely selective [COX-2 (SI) > 1000] comparable to celecoxib [COX-2 (SI) > 384], COX-2 inhibitor that showed superior anti-inflammatory activity (ED₅₀ = 72.4 mg/kg) relative to diclofenac (ED₅₀ = 114 mg/kg). Molecular modeling was carried out through docking the designed compounds into the COX-2 binding site to predict if these compounds have analogous binding mode to the COX-2 inhibitors. The study showed that the homosulfonamide fragment of 8a inserted deep inside the 2°-pocket of the COX-2 active site, where the SO₂NH₂ group underwent H-bonding interaction with Gln¹⁹²(2.95 Å), Phe⁵¹⁸(2.82 Å) and Arg⁵¹³(2.63 and 2.73 Å). Docking study of the synthesized compound 8a into the active site of COX-2 revealed a similar binding mode to SC-558, a selective COX-2 inhibitor.     

A new fungal peroxidase with alkaline-tolerant,chloride-enhancing activity and dye decolorization capacity

A new fungal peroxidase (Pspd) from Perenniporia subacida was purified by ammonium sulfate precipitation, DEAE-cellulose DE52 anionic exchange and Sepharose GL-6B chromatography, resulting in a high specific activity of 9.138 U mg⁻¹, 3.622-fold higher than that of crude enzyme at the same level. Polyacrylamide gel electrophoresis and UV–vis adsorption spectrum analysis showed that the purified enzyme is a heme-containing monomer with a molecular mass of 43.0 kDa. Optimal peroxidase activity was obtained at pH 5.5 and 30 °C when using 100.0 mM n-propanol as substrate, and under these conditions, the catalytic efficiency (k_cat/K_m) is 1.57 s⁻¹ μM⁻¹. Pspd was inhibited by l-cysteine, dithiothreitol, EDTA and sodium azide, but stimulated by Mn²⁺, Na⁺, Mg²⁺ and K⁺. The enzyme is stable over a broad pH range of 7.0–8.5 after incubation for 72 h, which indicated that the enzyme is lasting alkaline-tolerant. It was worth noting that the chloride at relatively low concentrations can enhance the peroxidase activity, with concomitant increase in substrate affinity. Additionally, Pspd performed high decolorization capability toward structurally various dyes and the capability was independent of the oxidizing mediators, with 75.31% of Neutral Red (50.0 mg L⁻¹) being decolorized by 1.5 U mL⁻¹ pure enzyme after incubation for 72 h. These properties demonstrated that Pspd has potentials for textile dyes decolorization applications.     

Desulphurization characteristics of bamboo charcoal from sulfur solution

Sulfur powder and sulfur dioxide (SO₂) often floated in air, produced acid rain and algal blooms, and could cause diseases. Bamboo charcoal could have adsorption and filtration properties. In order to figure out the optimal adsorption condition and the intrinsic change of the bamboo charcoal, five chemicals were adsorbed by bamboo charcoal and were analyzed by FT-IR. Fe₂(SO₄)₃’s, Na₂SO₄’s, Na₂S₂O₈’s, S’s, and Na₂SO₃’s optimal adsorption condition was the concentration of 19 g/1000 g and stir time of 20 min, 21 g/1000 g and stir time of 60 min, 7 g/1000 g and stir time of 120 min, 11 g/1000 g and stir time of 120 min, 21 g/1000 g and stir time of 60 min, respectively. FT-IR spectra showed that for FT-IR spectra of Fe₂(SO₄)₃, the transmissivity of the peaks at 3435 cm⁻¹ and 2925 cm⁻¹ achieved the maximum for 60 min and the concentration was 19 g/1000 g, the transmissivity of the peaks at 1630 cm⁻¹, 1060 cm⁻¹ and 660 cm⁻¹ achieved the maximum for 60 min and the concentration was 7 g/1000 g. For FT-IR spectra of Na₂SO₄, the transmissivity of the peaks at 1630 cm⁻¹, 1060 cm⁻¹ and 660 cm⁻¹ achieved the maximum for 20 min and the concentration was 13 g/1000 g. For FT-IR spectra of Na₂S₂O₈, the transmissivity of the peaks at 3435 cm⁻¹, 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 120 min and the concentration was 19 g/1000 g. For FT-IR spectra of S, the transmissivity of the peaks at 3435 cm⁻¹, 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 20 min and the concentration was 11 g/1000 g, 17 g/1000 g and 21 g/1000 g. For FT-IR spectra of Na₂SO₃, the transmissivity of the peaks at 3435 cm⁻¹ achieved the maximum for 120 min and the concentration was 5 g/1000 g, the transmissivity of the peaks at 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 120 min and the concentration was 11 g/1000 g. In these states, the number of the transmissivity of the maximum peaks is the largest.     

A convenient preparation of pentaaquanitrosylchromium(2+) sulfate: The crystal structure revisited

The complex pentaaquanitrolsylchromium(2+) sulfate, [Cr(OH₂)₅(NO)]SO₄ has been prepared in a high yield by the hydrolysis of [Cr(NCCH₃)₅(NO)](BF₄)₂ in dilute sulfuric acid. Crystals of [Cr(OH₂)₅(NO)]SO₄ · H₂O have been grown and characterized by X-ray crystallography. Continuous photolysis of [Cr(NCCH₃)₅(NO)]²⁺ in acetonitrile solution with 404 nm light results in a release of NO with the quantum yield Φ = 0.55 mol einstein⁻¹ at 298 K with the resulting solvated Cr²⁺ ion being trapped by molecular dioxygen present in the solution.     

Isolation and identification of a novel Rhodococcus sp. ML-0004 producing epoxide hydrolase and optimization of enzyme production

Rhodococcus sp. ML-0004, a novel strain for producing epoxide hydrolase, was isolated from soil in this study. The epoxide hydrolase can catalyze the stereo-specific hydrolysis of cis-epoxysuccinic acid to generate l(+)-tartaric acid. By examining physiological, biochemical characteristics and comparing its 16S rDNA gene sequence, it was identified as Rhodococcus opacus, and named R. opacus ML-0004. The optimal conditions for epoxide hydrolase production from R. opacus ML-0004 were also investigated. Propanediol and (NH₄)₂SO₄ were selected as carbon source and nitrogen source, respectively, for the production of R. opacus ML-0004 epoxide hydrolase. The optimal conditions for epoxide hydrolase production were fermentation temperature = 28 °C, pH 7.0, and cultivation time = 26 h. Under these conditions, the maximum epoxide hydrolase activity reached 10.5 U mL⁻¹.