金属对金属全髋关节置换术后体内金属离子对机体的影响

金属对金属全髋假体由于其具有良好的活动度因而被广泛应用全髋关节置换,但是由于金属对金属全髋假体置换术后可以产生大量的钴铬金属离子而使机体内血液尿液中金属离子水平升高,而金属离子水平升高后可能会对机体产生不利影响,本文就金属对金属全髋假体置换术后对机体的影响作一综述。     

金属对金属全髋关节置换术后体内金属离子对机体的影响

金属对金属全髋假体由于其具有良好的活动度因而被广泛应用全髋关节置换,但是由于金属对金属全髋假体置换术后可以产生大量的钴铬金属离子而使机体内血液尿液中金属离子水平升高,而金属离子水平升高后可能会对机体产生不利影响,本文就金属对金属全髋假体置换术后对机体的影响作一综述。     

髋关节假体脱位分析软件的设计与开发

目的研发了髋关节假体脱位分析软件。软件基于ADAMS/VIEW软件进行二次开发,能够可视化的构建三维参数化的髋关节假体模型,模型能够模拟假体的六种运动。应用此软件可以为病人更好的选择和植入假体,评估各种髋关节假体的安全活动范围,用来设计新的关节假体。     

大直径陶瓷假体用于全髋关节置换术的稳定性和安全性

目的:探讨大直径陶瓷-陶瓷假体对髋关节置换患者术后假体磨损,稳定性和髋关节功能的影响。方法:选取我院2010年1月-2014年1月间采用大直径陶瓷-陶瓷假体行关全髋置换的股骨头坏死患者46例作为研究组。另选40例采用标准金属-聚乙烯假体手术患者作为对照组。观察并比较两组患者假体磨损情况、髋关节稳定性和功能评分。结果:研究组患者术后无一例脱位,发生假体松动1例,Harris评分为(82.04±1.92)分;对照组术后发生假体脱位4例,松动4例,Harris评分为(81.37±1.27)分;研究组假体稳定性和磨损程度优于对照组,差异具有统计学意义(P0.05),但两组髋关节功能评分无显著差异(P0.05)。发生假体松动的患者术后血沉、IL-1和IL-6浓度均高于正常值,差异具有统计学意义(P0.05)。结论:与标准假体相比,大直径陶瓷-陶瓷假体稳定性好,磨损率低,是全髋置换手术的良好假体。     

Quantitative Comparison of Commercial and Non-Commercial Metal Artifact Reduction Techniques in Computed Tomography

Objectives

Typical streak artifacts known as metal artifacts occur in the presence of strongly attenuating materials in computed tomography (CT). Recently, vendors have started offering metal artifact reduction (MAR) techniques. In addition, a MAR technique called the metal deletion technique (MDT) is freely available and able to reduce metal artifacts using reconstructed images. Although a comparison of the MDT to other MAR techniques exists, a comparison of commercially available MAR techniques is lacking. The aim of this study was therefore to quantify the difference in effectiveness of the currently available MAR techniques of different scanners and the MDT technique.

Materials and Methods

Three vendors were asked to use their preferential CT scanner for applying their MAR techniques. The scans were performed on a Philips Brilliance ICT 256 (S1), a GE Discovery CT 750 HD (S2) and a Siemens Somatom Definition AS Open (S3). The scans were made using an anthropomorphic head and neck phantom (Kyoto Kagaku, Japan). Three amalgam dental implants were constructed and inserted between the phantom’s teeth. The average absolute error (AAE) was calculated for all reconstructions in the proximity of the amalgam implants.

Results

The commercial techniques reduced the AAE by 22.0±1.6%, 16.2±2.6% and 3.3±0.7% for S1 to S3 respectively. After applying the MDT to uncorrected scans of each scanner the AAE was reduced by 26.1±2.3%, 27.9±1.0% and 28.8±0.5% respectively. The difference in efficiency between the commercial techniques and the MDT was statistically significant for S2 (p=0.004) and S3 (p<0.001), but not for S1 (p=0.63).

Conclusions

The effectiveness of MAR differs between vendors. S1 performed slightly better than S2 and both performed better than S3. Furthermore, for our phantom and outcome measure the MDT was more effective than the commercial MAR technique on all scanners.     

Wear Particles Derived from Metal Hip Implants Induce the Generation of Multinucleated Giant Cells in a 3-Dimensional Peripheral Tissue-Equivalent Model

Multinucleate giant cells (MGCs) are formed by the fusion of 5 to 15 monocytes or macrophages. MGCs can be generated by hip implants at the site where the metal surface of the device is in close contact with tissue. MGCs play a critical role in the inflammatory processes associated with adverse events such as aseptic loosening of the prosthetic joints and bone degeneration process called osteolysis. Upon interaction with metal wear particles, endothelial cells upregulate pro-inflammatory cytokines and other factors that enhance a localized immune response. However, the role of endothelial cells in the generation of MGCs has not been completely investigated. We developed a three-dimensional peripheral tissue-equivalent model (PTE) consisting of collagen gel, supporting a monolayer of endothelial cells and human peripheral blood mononuclear cells (PBMCs) on top, which mimics peripheral tissue under normal physiological conditions. The cultures were incubated for 14 days with Cobalt chromium alloy (CoCr ASTM F75, 1–5 micron) wear particles. PBMC were allowed to transit the endothelium and harvested cells were analyzed for MGC generation via flow cytometry. An increase in forward scatter (cell size) and in the propidium iodide (PI) uptake (DNA intercalating dye) was used to identify MGCs. Our results show that endothelial cells induce the generation of MGCs to a level 4 fold higher in 3-dimentional PTE system as compared to traditional 2-dimensional culture plates. Further characterization of MGCs showed upregulated expression of tartrate resistant alkaline phosphatase (TRAP) and dendritic cell specific transmembrane protein, (DC-STAMP), which are markers of bone degrading cells called osteoclasts. In sum, we have established a robust and relevant model to examine MGC and osteoclast formation in a tissue like environment using flow cytometry and RT-PCR. With endothelial cells help, we observed a consistent generation of metal wear particle- induced MGCs, which heralds metal on metal hip failures.     

Relationship between Sponsorship and Failure Rate of Dental Implants: A Systematic Approach

Background

The number of dental implant treatments increases annually. Dental implants are manufactured by competing companies. Systematic reviews and meta-analysis have shown a clear association between pharmaceutical industry funding of clinical trials and pro-industry results. So far, the impact of industry sponsorship on the outcomes and conclusions of dental implant clinical trials has never been explored. The aim of the present study was to examine financial sponsorship of dental implant trials, and to evaluate whether research funding sources may affect the annual failure rate.

Methods and Findings

A systematic approach was used to identify systematic reviews published between January 1993 and December 2008 that specifically deal with the length of survival of dental implants. Primary articles were extracted from these reviews. The failure rate of the dental implants included in the trials was calculated. Data on publication year, Impact Factor, prosthetic design, periodontal status reporting, number of dental implants included in the trials, methodological quality of the studies, presence of a statistical advisor, and financial sponsorship were extracted by two independent reviewers (kappa  = 0.90; CI_95% [0.77–1.00]). Univariate quasi-Poisson regression models and multivariate analysis were used to identify variables that were significantly associated with failure rates. Five systematic reviews were identified from which 41 analyzable trials were extracted. The mean annual failure rate estimate was 1.09%.(CI_95% [0.84–1.42]). The funding source was not reported in 63% of the trials (26/41). Sixty-six percent of the trials were considered as having a risk of bias (27/41). Given study age, both industry associated (OR = 0.21; CI_95% [0.12–0.38]) and unknown funding source trials (OR = 0.33; (CI_95% [0.21–0.51]) had a lower annual failure rates compared with non-industry associated trials. A conflict of interest statement was disclosed in 2 trials.

Conclusions

When controlling for other factors, the probability of annual failure for industry associated trials is significantly lower compared with non-industry associated trials. This bias may have significant implications on tooth extraction decision making, research on tooth preservation, and governmental health care policies.     

异化金属还原菌的研究进展

微生物利用金属氧化物作呼吸作用的最终电子受体是一种新的代谢途径。该过程微生物利用有机底物异化还原金属氧化物进行生长代谢。异化金属还原菌对于研究探索古生物呼吸形式、界定生命的上限温度等生命科学问题具有重要研究价值,同时在生物整治、微生物燃料电池等方面具有广阔的应用前景。对异化金属还原菌进行了综述,并对这类菌的研究应用给了评述和展望。     

Similar Outcomes Achieved Between Anterior and Posterior Approach Total Hip Arthroplasty Using Dual Mobility Implants

BackgroundDual mobility (DM) bearings for total hip arthroplasty (THA) have been proposed to reduce the risk of instability in high-risk patients; however, their utility in primary THA remains relatively unexplored. No previous reports have described whether surgical approach influences outcomes associated with DM implant systems. This study aims to compare patient reported outcomes and post-operative groin pain between patients undergoing anterior approach versus posterior approach following primary THA with DM implants.MethodsWe retrospectively reviewed all patients who underwent primary THA and received a DM implant between 2011-2021. Patients were stratified into two cohorts based on surgical approach (anterior vs. posterior approach). Primary outcomes included the presence of substantial postoperative groin pain as well as readmission and revision rates. Demographic differences were assessed using chi-square and independent sample t-tests. Outcomes were compared using multilinear and logistic regressions.ResultsOf the 495 patients identified, 55 (11%) underwent THA via the anterior approach and 440 (89%) via the posterior approach. Surgical time (100.24 vs. 109.42 minutes, p=0.070), length of stay (2.19vs.2.67 days,p=0.072), discharge disposition (p=0.151), and significant postoperative groin pain (1.8%vs.0.7%,p=0.966) did not statistically differ between the cohorts. 90-day readmission (9.1%vs.7.7%,p=0.823) and revision rate (0.0%vs.3.0%,p=0.993) did not significantly differ as well. Specifically, readmission (p=0.993) and revision (p=0.998) for instability did not significantly differ between the cohorts. We found no statistical difference in HOOS, JR (p=0.425), VR-12 PCS (p=0.718), and VR-12 MCS (p=0.257) delta score improvement from preoperative to 1-year follow-up between the two groups.ConclusionComparable outcomes following implantation of DM constructs may be achievable irrespective of the surgical approach employed. The incidence of iliopsoas injections for groin pain did not significantly differ between anterior and posterior approaches. Future investigation is needed to determine whether surgical approach influences long-term outcomes in patients receiving DM implants. Level of Evidence: III     

On the Effects of Cyclic Transversal Forces on Osseointegrated Dental Implants: Experimental and Finite Element Shakedown Analyses

This paper is concerned with the mechanical strength of fixed osseointegrated dental implants subjected to cyclic external loads, applied mainly in a direction orthogonal to their axis. Such a loading condition, seen as a basic design action for the implant, has been given little attention so far. Experimental results and numerical simulations, performed on two- and three-dimensional Finite Element models, are discussed. The shakedown theory is used to show that a common implant design (threaded fixture-abutment-connection screw) is susceptible of low-cycle fatigue failure under loading conditions well within the working range, even if the same design is able to withstand loading of the same type, but applied monotonically, much in excess of the working values. The shakedown analyses give an indication of several possible failure modalities: the low-cycle fatigue either of the implant or of the connection screw, or the loosening of the connection screw itself. Experimental and numerical results are in good qualitative agreement, and both suggest that the issue of transversal cyclic loading on fixed dental implants should be carefully reconsidered in the design phase.     

基于CT的股骨有限元模型的建立及髋关节中空多孔假体植入后受力分布的初步研究

利用有限元分析的方法,对髋关节中空多孔假体植入后的受力分布改变进行研究,为改进中空多孔人工关节假体的设计提供依据.建立了股骨和假体三维有限元模型,应用有限元分析软件Ansys5.7模拟单腿负重状态,考察应力分布并进行比较.使用SPSS Statistics 17.0软件进行分析处理,绘制折线图.结果表明:a.开孔后张力侧最大压应力有所减小,开孔部位的应力水平变化不明显.b.与周围骨质形成连接后孔缘局部应力增加,张力侧受力改变不明显.c.短柄假体受力模式仍为远端应力集中;张力侧应力减小,开孔部位应力明显增加.d.下孔受力均大于上孔,受力方向基本一致.     

Re-Infection Outcomes following One- and Two-Stage Surgical Revision of Infected Hip Prosthesis: A Systematic Review and Meta-Analysis

Background

The two-stage revision strategy has been claimed as being the “gold standard” for treating prosthetic joint infection. The one-stage revision strategy remains an attractive alternative option; however, its effectiveness in comparison to the two-stage strategy remains uncertain.

Objective

To compare the effectiveness of one- and two-stage revision strategies in treating prosthetic hip infection, using re-infection as an outcome.

Design

Systematic review and meta-analysis.

Data Sources

MEDLINE, EMBASE, Web of Science, Cochrane Library, manual search of bibliographies to March 2015, and email contact with investigators.

Study Selection

Cohort studies (prospective or retrospective) conducted in generally unselected patients with prosthetic hip infection treated exclusively by one- or two-stage revision and with re-infection outcomes reported within two years of revision. No clinical trials were identified.

Review Methods

Data were extracted by two independent investigators and a consensus was reached with involvement of a third. Rates of re-infection from 38 one-stage studies (2,536 participants) and 60 two-stage studies (3,288 participants) were aggregated using random-effect models after arcsine transformation, and were grouped by study and population level characteristics.

Results

In one-stage studies, the rate (95% confidence intervals) of re-infection was 8.2% (6.0–10.8). The corresponding re-infection rate after two-stage revision was 7.9% (6.2–9.7). Re-infection rates remained generally similar when grouped by several study and population level characteristics. There was no strong evidence of publication bias among contributing studies.

Conclusion

Evidence from aggregate published data suggest similar re-infection rates after one- or two-stage revision among unselected patients. More detailed analyses under a broader range of circumstances and exploration of other sources of heterogeneity will require collaborative pooling of individual participant data.

Systematic Review Registration

PROSPERO 2015: CRD42015016559     

Comparison of Odontogenic Differentiation of Human Dental Follicle Cells and Human Dental Papilla Cells

Classical tooth development theory suggests that dental papilla cells (DPCs) are the precursor cells of odontoblasts, which are responsible for dentin development. However, our previous studies have indicated that dental follicle cells (DFCs) can differentiate into odontoblasts. To further our understanding of tooth development, and the differences in dentinogenesis between DFCs and DPCs, the odontogenic differentiation of DFCs and DPCs was characterized in vitro and in vivo. DFCs and DPCs were individually combined with treated dentin matrix (TDM) before they were subcutaneously implanted into the dorsum of mice for 8 weeks. Results showed that 12 proteins were significantly differential, and phosphoserine aminotransferase 1 (PSAT1), Isoform 2 of hypoxia-inducible factor 1-alpha (HIF1A) and Isoform 1 of annexin A2 (ANXA2), were the most significantly differential proteins. These proteins are related to regulation of bone balance, angiogenesis and cell survival in an anoxic environment. Both DFCs and DPCs express odontogenic, neurogenic and peridontogenic markers. Histological examination of the harvested grafts showed that both DFCs and DPCs form pulp-dentin/cementum-periodentium-like tissues in vivo. Hence, DFCs and DPCs have similar odontogenic differentiation potential in the presence of TDM. However, differences in glucose and amino acid metabolism signal transduction and protein synthesis were observed for the two cell types. This study expands our understanding on tooth development, and provides direct evidence for the use of alternative cell sources in tooth regeneration.     

Interruption of Electrical Conductivity of Titanium Dental Implants Suggests a Path Towards Elimination Of Corrosion

Peri-implantitis is an inflammatory disease that results in the destruction of soft tissue and bone around the implant. Titanium implant corrosion has been attributed to the implant failure and cytotoxic effects to the alveolar bone. We have documented the extent of titanium release into surrounding plaque in patients with and without peri-implantitis. An in vitro model was designed to represent the actual environment of an implant in a patient’s mouth. The model uses actual oral microbiota from a volunteer, allows monitoring electrochemical processes generated by biofilms growing on implants and permits control of biocorrosion electrical current. As determined by next generation DNA sequencing, microbial compositions in experiments with the in vitro model were comparable with the compositions found in patients with implants. It was determined that the electrical conductivity of titanium implants was the key factor responsible for the biocorrosion process. The interruption of the biocorrosion current resulted in a 4–5 fold reduction of corrosion. We propose a new design of dental implant that combines titanium in zero oxidation state for osseointegration and strength, interlaid with a nonconductive ceramic. In addition, we propose electrotherapy for manipulation of microbial biofilms and to induce bone healing in peri-implantitis patients.     

Resveratrol and Celastrol Loaded Collagen Dental Implants Regulate Periodontal Ligament Fibroblast Growth and Osteoclastogenesis of Bone Marrow Macrophages

Collagen is widely used for dental therapy in several ways such as films, 3D matrix, and composites, besides traditional Chinese medicine (TCM), has been used in tissue regeneration and wound healing application for centuries. Hence, the present study was targeted for the first time to fabricate collagen film with TCM such as resveratrol and celastrol in order to investigate the human periodontal ligament fibroblasts (HPLF) growth and bone marrow macrophages (BMM) derived osteoclastogenesis. Further, the physicochemical, mechanical and biological activities of collagen‐TCM films crosslinked by glycerol and EDC‐NHS (1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide‐N‐hydroxysulfosuccinimide) were investigated. Collagen film characterization was significantly regulated by the nature of plasticizers like hydrophobic and degree of polarity. Interestingly, the collagen film's denaturation temperature was increased by EDC‐NHS than glycerol. FT‐IR data confirmed the functional group changes due to chemical interaction of collagen with TCM. Morphological changes of HPLF cells cultured in control and collagen films were observed by SEM. Importantly, the addition of resveratrol upregulated the proliferation of HPLF cells, while osteoclastogenesis of BMM cells treated with mCSF‐RANKL was significantly downregulated by celastrol. Accordingly, the collagen‐TCM film could be an interesting material for dental regeneration, and especially it is a therapeutic target to restrain the elevated bone resorption during osteoporosis.