A functional cutin matrix is required for plant protection against water loss

The plant cuticle, a cutin matrix embedded with and covered by wax, seals the aerial organ''s surface to protect the plant against uncontrolled water loss. The cutin matrix is essential for the cuticle to function as a barrier to water loss. Recently, we identified from wild barley a drought supersensitive mutant, eibi1, which is caused by a defective cutin matrix as the result of the loss of function of HvABCG31, an ABCG full transporter. Here, we report that eibi1 epidermal cells contain lipid-like droplets, which are supposed to consist of cutin monomers that have not been transported out of the cells. The eibi1 cuticle is fragile due to a defective cutin matrix. The rice ortholog of the EIBI1 gene has a similar pattern of expression, young shoot but not flag leaf blade, as the barley gene. The model of the function of Eibi1 is discussed. The HvABCG31 full transporter functions in the export of cutin components and contributed to land plant colonization, hence also to terrestrial life evolution.Key words: ABC transporter, cuticle, cuticular wax, drought resistance, inclusion     

ABNORMAL POLLEN VACUOLATION1 (APV1) is required for male fertility by contributing to anther cuticle and pollen exine formation in maize

Anther cuticle and pollen exine are the major protective barriers against various stresses. The proper functioning of genes expressed in the tapetum is vital for the development of pollen exine and anther cuticle. In this study, we report a tapetum‐specific gene, Abnormal Pollen Vacuolation1 (APV1), in maize that affects anther cuticle and pollen exine formation. The apv1 mutant was completely male sterile. Its microspores were swollen, less vacuolated, with a flat and empty anther locule. In the mutant, the anther epidermal surface was smooth, shiny, and plate‐shaped compared with the three‐dimensional crowded ridges and randomly formed wax crystals on the epidermal surface of the wild‐type. The wild‐type mature pollen had elaborate exine patterning, whereas the apv1 pollen surface was smooth. Only a few unevenly distributed Ubisch bodies were formed on the apv1 mutant, leading to a more apparent inner surface. A significant reduction in the cutin monomers was observed in the mutant. APV1 encodes a member of the P450 subfamily, CYP703A2‐Zm, which contains 530 amino acids. APV1 appeared to be widely expressed in the tapetum at the vacuolation stage, and its protein signal co‐localized with the endoplasmic reticulum (ER) signal. RNA‐Seq data revealed that most of the genes in the fatty acid metabolism pathway were differentially expressed in the apv1 mutant. Altogether, we suggest that APV1 functions in the fatty acid hydroxylation pathway which is involved in forming sporopollenin precursors and cutin monomers that are essential for the development of pollen exine and anther cuticle in maize.     

Fine structure of the <Emphasis Type="Italic">Arabidopsis</Emphasis> stem cuticle: effects of fixation and changes over development

Main conclusion

The Arabidopsis cuticle, as observed by electron microscopy, consists primarily of the cutin/cutan matrix. The cuticle possesses a complex substructure, which is correlated with the presence of intracuticular waxes. The plant cuticle is composed of an insoluble polyester, cutin, and organic solvent soluble cuticular waxes, which are embedded within and coat the surface of the cutin matrix. How these components are arranged in the cuticle is not well understood. The Arabidopsis cuticle is commonly understood as ‘amorphous,’ lacking in ultrastructural features, and is often observed as a thin (~80–100 nm) electron-dense layer on the surface of the cell wall. To examine this cuticle in more detail, we examined cuticles from both rapidly elongating and mature sections of the stem and compared the preservation of the cuticles using conventional chemical fixation methods and high-pressure freezing/freeze-substitution (HPF/FS). We found that HPF/FS preparation revealed a complex cuticle substructure, which was more evident in older stems. We also found that the cuticle increases in thickness with development, indicating an accretion of polymeric material, likely in the form of the non-hydrolyzable polymer, cutan. When wax was extracted by chloroform immersion prior to sample preparation, the contribution of waxes to cuticle morphology was revealed. Overall, the electron-dense cuticle layer was still visible but there was loss of the cuticle substructure. Furthermore, the cuticle of cer6, a wax-deficient mutant, also lacked this substructure, suggesting that these fine striations were dependent on the presence of cuticular waxes. Our findings show that HPF/FS preparation can better preserve plant cuticles, but also provide new insights into the fine structure of the Arabidopsis cuticle.

     

A novel class of sticky peel and light green mutations causes cuticle deficiency in leaves and fruits of tomato (Solanum lycopersicum)

The plant cuticle consists of aliphatic wax and cutin, and covers all the aerial tissues, conferring resistance to both biotic and abiotic stresses. In this study, we performed phenotypic characterizations of tomato mutants having both sticky peel (pe) and light green (lg) mutations. Our genetic analysis showed that these two mutations are tightly linked and behave like a monogenic recessive mutation. The double mutant (pe lg) produced glossy soft fruits with light green leaves, most likely due to defects in cuticle formation. Cytological analysis revealed that the thickness of the fruit cuticle layer was dramatically reduced in the pe lg mutant. The epidermal cells of the leaves were also deformed in the pe lg mutant, suggesting that leaf cuticle formation was also disrupted in the mutant. Consistent with this, transmission electron microscopic analysis showed that the electron density of the cuticle layer of the adaxial surface of the leaf was reduced in the pe lg mutant compared to WT, suggesting that there are changes in cuticle structure and/or composition in the pe lg mutant. Both physiological analysis to measure the rate of transpiration, and staining of the fruits and leaves with toluidine blue, revealed that water permeability was enhanced in the pe lg mutant, consistent with the reduced thickness of its cuticle layer. Taken together the preliminary analyses of the cuticle components, the PE LG is most likely involved in proper cuticle formation.     

ABC-type transporters and cuticle assembly: Linking function to polarity in epidermis cells

The aerial organs of plants are covered with a cuticle, a continuous layer overlaying the outermost cell walls of the epidermis. The cuticle is composed of two major classes of the lipid biopolymers: cutin and waxes, collectively termed cuticular lipids. Biosynthesis and transport of cuticular lipids occur predominantly in the epidermis cells. In the transport pathway, cuticular lipids are exported from their site of biosynthesis in the ER/plastid to the extracellular space through the plasma membrane and cell wall. Growing evidence suggests that ATP-binding cassette (ABC) transporters are implicated in transport of cuticular lipids across the plasma membrane of epidermal cells. The Arabidopsis ABC-type transporter protein CER5 (WBC12) was reported to act as a wax monomers transporter. In recent works, our group and others showed that a CER5-related protein, DESPERADO (DSO/WBC11), is required for cutin and wax monomers transport through the plasma membrane of Arabidopsis epidermis cells. Unlike the cer5 mutant, DSO loss-of-function had a profound effect on plant growth and development, particularly dwarfism, postgenital organ fusions, and altered epidermal cell differentiation. The partially overlapping function of CER5 and DSO and the fact that these proteins are half-size ABC transporters suggest that they might form a hetero-dimeric complex while transporting wax components. An intriguing observation was the polar localization of DSO in the distal part of epidermis cells. This polar expression might be explained by DSO localization within lipid rafts, specific plasma membrane microdomains which are associated with polar protein expression. In this review we suggest possible mechanisms for cuticular lipids transport and a link between DSO function and polar expression. Furthermore, we also discuss the subsequent transport of cuticular constituents through the hydrophobic cell wall and the possible involvement of lipid transfer proteins in this process.Key words: ABC transporter, cuticular lipids, polar expression, plasma membrane, epidermis     

Organ fusion and defective cuticle function in a lacs1 lacs2 double mutant of Arabidopsis

As the outermost layer on aerial tissues of the primary plant body, the cuticle plays important roles in plant development and physiology. The major components of the cuticle are cutin and cuticular wax, both of which are composed primarily of fatty acid derivatives synthesized in the epidermal cells. Long-chain acyl-CoA synthetases (LACS) catalyze the formation of long-chain acyl-CoAs and the Arabidopsis genome contains a family of nine genes shown to encode LACS enzymes. LACS2 is required for cutin biosynthesis, as revealed by previous investigations on lacs2 mutants. Here, we characterize lacs1 mutants of Arabidopsis that reveals a role for LACS1 in biosynthesis of cuticular wax components. lacs1 lacs2 double-mutant plants displayed pleiotropic phenotypes including organ fusion, abnormal flower development and reduced seed set; phenotypes not found in either of the parental mutants. The leaf cuticular permeability of lacs1 lacs2 was higher than that of either lacs1 or lacs2 single mutants, as determined by measurements of chlorophyll leaching from leaves immersed in 80% ethanol, staining with toluidine blue dye and direct measurements of water loss. Furthermore, lacs1 lacs2 mutant plants are highly susceptible to drought stress. Our results indicate that a deficiency in cuticular wax synthesis and a deficiency in cutin synthesis together have compounding effects on the functional integrity of the cuticular barrier, compromising the ability of the cuticle to restrict water movement, protect against drought stress and prevent organ fusion.     

Effect of sweet cherry genes PaLACS2 and PaATT1 on cuticle deposition,composition and permeability in Arabidopsis

The cuticular membrane (CM) of sweet cherry (Prunus avium L.) fruit is severely strained during development. Strain results from a cessation of CM deposition during early development and is possibly caused by a downregulation of genes involved in CM synthesis. The objectives of our study were to investigate the effects of ectopic expression of two sweet cherry genes, PaLACS2 (a putative long-chain acyl-CoA synthetase) and PaATT1 (a putative cytochrome P450 monooxygenase), in Arabidopsis thaliana (L.). Effects on the expression of endogenous LACS2, ATT1 and LACS1 genes, wax and cutin composition, and cuticle permeability were investigated in 13 transgenic lines. Of these, six lines are selected for presentation based on the magnitude of the response. The amount of cutin increased in the PaLACS2 overexpression line C-L-29 and in the complemented lacs2-1 knockout mutant line l-L-14, but overexpression had no effect on cutin composition or wax. Wax deposition decreased in the complemented knockout lines l-L-14 and l-L-21. Overexpressing PaATT1 in A. thaliana line C-A-6 had no significant effect on cutin and wax deposition. In the complemented knockout lines a-A-7 and a-A-12, cutin deposition increased, whereas wax deposition was unaffected. The permeability of the cuticle for water and toluidine blue decreased in the PaLACS2 and PaATT1 complemented knockout lines. The results suggest that (1) PaLACS2 and PaATT1 expressed in A. thaliana are involved in cutin biosynthesis, and (2) their functions are consistent with those of a typical long-chain acyl-CoA synthetase (PaLACS2) and of a cytochrome P450 monooxygenase (PaATT1).     

OsBC1L4 encodes a COBRA-like protein that affects cellulose synthesis in rice

Plant morphogenesis is highly dependent on the regulation of cell division and expansion. The organization of the cellulose microfibrils in the cell wall is a key determinant of cell expansion. Previously, a dwarf mutant with fewer tillers, Osbc1l4 (Oryza sativa brittle culm 1 like 4), was identified by screening a rice T-DNA insertion mutant library. It is reported here that OsBC1L4 encodes a COBRA-like protein that exhibits typical structural features of a glycosylphosphatidylinositol-anchor protein. The T-DNA insertion in OsBC1L4 results in abnormal cell expansion. A decrease in cellulose content but the increase in pectin and starch contents was identified in Osbc1l4 mutants by measuring the content of wall components. OsBC1L4 was expressed in all tissues/organs examined, with a low level in leaves. OsBC1L4 protein is mainly located in the cell wall and plasma membrane. Correlation analysis indicated that the expression of OsBC1L4 was highly correlated to that of several primary wall-forming cellulose synthase genes (CESAs). Moreover, the expression level of several cellulose-related genes is increased in Osbc1l4 mutants, which suggests that a feedback mechanism may exist during cellulose synthesis.     

Rice No Pollen 1 (NP1) is required for anther cuticle formation and pollen exine patterning

Angiosperm male reproductive organs (anthers and pollen grains) have complex and interesting morphological features, but mechanisms that underlie their patterning are poorly understood. Here we report the isolation and characterization of a male sterile mutant of No Pollen 1 (NP1) in rice (Oryza sativa). The np1‐4 mutant exhibited smaller anthers with a smooth cuticle surface, abnormal Ubisch bodies, and aborted pollen grains covered with irregular exine. Wild‐type exine has two continuous layers; but np1‐4 exine showed a discontinuous structure with large granules of varying size. Chemical analysis revealed reduction in most of the cutin monomers in np1‐4 anthers, and less cuticular wax. Map‐based cloning suggested that NP1 encodes a putative glucose‐methanol‐choline oxidoreductase; and expression analyses found NP1 preferentially expressed in the tapetal layer from stage 8 to stage 10 of anther development. Additionally, the expression of several genes involved in biosynthesis and in the transport of lipid monomers of sporopollenin and cutin was decreased in np1‐4 mutant anthers. Taken together, these observations suggest that NP1 is required for anther cuticle formation, and for patterning of Ubisch bodies and the exine. We propose that products of NP1 are likely important metabolites in the development of Ubisch bodies and pollen exine, necessary for polymerization, assembly, or both.     

Arabidopsis LTPG Is a Glycosylphosphatidylinositol-Anchored Lipid Transfer Protein Required for Export of Lipids to the Plant Surface

Plant epidermal cells dedicate more than half of their lipid metabolism to the synthesis of cuticular lipids, which seal and protect the plant shoot. The cuticle is made up of a cutin polymer and waxes, diverse hydrophobic compounds including very-long-chain fatty acids and their derivatives. How such hydrophobic compounds are exported to the cuticle, especially through the hydrophilic plant cell wall, is not known. By performing a reverse genetic screen, we have identified LTPG, a glycosylphosphatidylinositol-anchored lipid transfer protein that is highly expressed in the epidermis during cuticle biosynthesis in Arabidopsis thaliana inflorescence stems. Mutant plant lines with decreased LTPG expression had reduced wax load on the stem surface, showing that LTPG is involved either directly or indirectly in cuticular lipid deposition. In vitro 2-p-toluidinonaphthalene-6-sulfonate assays showed that recombinant LTPG has the capacity to bind to this lipid probe. LTPG was primarily localized to the plasma membrane on all faces of stem epidermal cells in the growing regions of inflorescence stems where wax is actively secreted. These data suggest that LTPG may function as a component of the cuticular lipid export machinery.     

Cuticular permeance in relation to wax and cutin development along the growing barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis>) leaf

The developing leaf three of barley provides an excellent model system for the direct determination of relationships between amounts of waxes and cutin and cuticular permeance. Permeance of the cuticle was assessed via the time-course of uptake of either toluidine blue or ¹⁴C-labelled benzoic acid ([¹⁴C] BA) along the length of the developing leaf. Toluidine blue uptake only occurred within the region 0–25 mm from the point of leaf insertion (POLI). Resistance—the inverse of permeance—to uptake of [¹⁴C] BA was determined for four leaf regions and was lowest in the region 10–20 mm above POLI. At 20–30 and 50–60 mm above POLI, it increased by factors of 6 and a further 32, respectively. Above the point of emergence of leaf three from the sheath of leaf two, which was 76–80 mm above POLI, resistance was as high as at 50–60 mm above POLI. GC-FID/MS analyses of wax and cutin showed that: (1) the initial seven fold increase in cuticular resistance coincided with increase in cutin coverage and appearance of waxes; (2) the second, larger and final increase in cuticle resistance was accompanied by an increase in wax coverage, whereas cutin coverage remained unchanged; (3) cutin deposition in barley leaf epidermis occurred in parallel with cell elongation, whereas deposition of significant amounts of wax commenced as cells ceased to elongate.     

Fruit cuticle lipid composition during development in tomato ripening mutants

Recent studies suggest that fruit cuticle is an important contributing factor to tomato (Solanum lycopersicum) fruit shelf life and storability. Moreover, it has been hypothesized that variation in fruit cuticle composition may underlie differences in traits such as fruit resistance to desiccation and microbial infection. To gain a better understanding of cuticle lipid composition diversity during fruit ontogeny and to assess if there are common features that correlate with ripening, we examined developmental changes in fruit cuticle wax and cutin monomer composition of delayed‐ripening tomato fruit mutants, ripening inhibitor (rin) and non‐ripening (nor) and delayed‐ripening landrace Alcobaça. Previous reports show that fruit ripening processes such as climacteric ethylene production, cell wall degradation and color change are significantly delayed, or do not occur, in these lines. In the study presented here, however, we show that fruits from rin, nor and Alcobaça have cuticle lipid compositions that differ significantly from normal fruits of Ailsa Craig (AC) even at very early stages in fruit development, with continuing impacts throughout ripening. Moreover, rin, nor and the Alcobaça lines show quite different wax profiles from AC and each other throughout fruit development. Although cutin monomer composition differed much less than wax composition among the genotypes, all delayed‐ripening lines possessed higher relative amounts of C₁₈ monomers than AC. Together, these results reveal new genetic associations between cuticle and fruit development processes and define valuable genetic resources to further explore the importance of cuticle in fruit shelf life.     

Development of plant cuticles: fine structure and cutin composition of Clivia miniata Reg. leaves

The fine structure and monomeric composition of the ester-cutin fraction (susceptible to BF₃/CH₃OH transesterification) of the adaxial leaf cuticle of Clivia miniata Reg. were studied in relation to leaf and cuticle development. Clivia leaves grow at their base such that cuticle and tissues increase in age from the base to the tip. The zone of maximum growth (cell expansion) was located between 1 and 4 cm from the base. During cell expansion, the projected surface area of the upper epidermal cells increased by a factor of nine. In the growth region the cuticle consists mainly of a polylamellate cuticle proper of 100–250 nm thickness. After cell expansion has ceased both the outer epidermal wall and the cuticle increase in thickness. Thickening of the cuticle is accomplished by interposition of a cuticular layer between the cuticle proper and the cell wall. The cuticular layer exhibits a reticulate fine structure and contributes most of the total mass of the cuticle at positions above 6 cm from the leaf base. The composition of ester cutin changed with the age of cuticles. In depolymerisates from young cuticles, 26 different monomers could be detected whereas in older ones their number decreased to 13. At all developmental stages, 9,16-/10,16-dihydroxyhexadecanoic acid (positional isomers not separated), 18-hydroxy-9-octadecenoic acid, 9,10,18-trihydroxyoctadecanoic acid and 9,10-epoxy-18-hydroxyoctadecanoic acid were most frequent with the epoxy alkanoic acid clearly predominating (47% at 16 cm). The results are discussed as to (i) the age dependence of cutin composition, (ii) the relationship between fine structure and composition, (iii) the composition of the cuticle proper, the cuticular layer and the non-depolymerizable cutin fraction, and (iv) the polymeric structure of cutin.Abbreviations CL cuticular layer - CP cuticle proper - MX cutin polymer matrix