Effects of surface-active chemicals on microbial adhesion

Summary A simple, continuously circulating fed-batch culture system of microorganisms was designed and used to study the adhesion of mixed microbial cultures to surfaces of 316 stainless steel, Admiralty brass, and wood. The adhesion of the microbes to the surfaces was monitored by scanning electron microscope analysis. Eighteen non-toxic, non-ionic, or anionic surface-active compounds were tested for efficacy as inhibitors of microbial adhesion to stainless steel and wood surfaces. A rating system was devised to correlate efficacy with the degree of biomass adhered to 316 stainless steel, although correlation could not be made with wood. A correlation was also found between the ability of a compound to lower surface tension and its ability to prevent microbial adhesion.     

The effect of turbulent flow and surface roughness on biofilm formation in drinking water

There is considerable interest in both Europe and the USA in the effects of microbiological fouling on stainless steels in potable water. However, little is known about the formation and effects of biofilms, on stainless steel in potable water environments, particularly in turbulent flow regimes. Results are presented on the development of biofilms on stainless steel grades 304 and 316 after exposure to potable water at velocities of 0.32, 0.96 and 1.75 m s⁻¹. Cell counts on slides of stainless steel grades 304 and 316 with both 2B (smooth) and 2D (rough) finishes showed viable and total cell counts were higher at the higher flow rates of 0.96 and 1.75 m s⁻¹, compared to a flow rate of 0.32 m s⁻¹. Extracellular polysaccharide levels were not significantly different (P< 0.05) between each flow rate on all stainless steel surfaces studied. higher levels were found at the higher water velocities. the biofilm attached to stainless steel was comprised of a mixed bacterial flora including Acinetobacter sp, Pseudomonas spp, Methylobacterium sp, and Corynebacterium/Arthrobacter spp. Epifluorescence microscopy provided evidence of rod-shaped bacteria and the formation of stands, possibly of extracellular material attached to stainless steel at high flow rates but not at low flow rates. Received 04 February 1998/ Accepted in revised form 12 February 1999     

Influence of the Surface Topography of Stainless Steel on Bacterial Adhesion

Bacterial adhesion on stainless steel may cause problems such as microbially induced corrosion or represent a chronic source of microbial contamination. The investigation focussed on how the extent and patterns of four bacterial species comprising three different phyla and a broad variety of physicochemical characteristics was influenced by the surface topography of AISI 304 stainless steel. Five types of surface finish corresponding to roughness values R a between 0.03 and 0.89 w m were produced. Adhesion of all four bacteria was minimal at R a =0.16 w m, whereas smoother and rougher surfaces gave rise to more adhesion. This surface exhibited parallel scratches of 0.7 w m, in which a high proportion of bacteria of three of the strains aligned. Reduced overall adhesion was attributed to unfavorable interactions between this surface and bacteria oriented other than parallel to the scratches. Interaction energy calculations and considerations of micro-geometry confirmed this mechanism. Rougher surfaces exhibiting wider scratches allowed a higher fraction of bacteria to adhere in other orientations, whereas the orientation of cells adhered to the smoothest surface was completely random.     

The effect of extracellular polymeric substances on the attachment of Pseudomonas NCIMB 2021 to AISI 304 and 316 stainless steel

Surfaces of AISI 304 and 316 stainless steels were pre-treated with three different types of extracellular polymeric substances, viz. (i) exopolymers released into the culture medium ("free"; or planktonic exopolymers), (ii) capsular exopolymers, and (iii) biofilm exopolymers, produced by continuous cultures of marine Pseudomonas NCIMB 2021. The initial attachment of Pseudomonas cells to exopolymer-conditioned steel surfaces varied with the exopolymer type and concentration. Results gained from wettability studies of exopolymer-treated steel using contact angle measurements, as well as from the surface roughness measurements conducted employing atomic force microscopy analysis, could not account for the observed, statistically significant differences (p < 0.1) in the level of bacterial surface colonisation. It is therefore proposed that neither surface hydrophobicity nor roughness play an important part in the early attachment of Pseudomonas NCIMB 2021 to the conditioned steel surfaces and that a difference in the chemistry of the exopolymers is most likely a key parameter influencing initial cell adhesion to pre-treated steel.     

Validation of AKACID plus as a room disinfectant in the hospital setting

AKACID Plus, a novel polymeric guanidine with broad antimicrobial activity against multiantibiotic-resistant bacterial strains, was used in the present study as a room disinfectant. Disinfection of closed rooms experimentally contaminated with antibiotic-susceptible and multiresistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa, and Escherichia coli was performed using AKACID Plus at concentrations of 0.1, 0.25, and 0.5% for 100 min. Bacterial suspensions were distributed on plastic and stainless steel plates and placed in a test room. Recovery of the test microorganisms was determined before nebulizing, 60 and 100 min after initiation, and 4 h after the end of room disinfection by a simple swab-rinse technique. The swab-rinse method demonstrated a dose- and time-dependent effectiveness of AKACID Plus in eradicating S. aureus, E. coli, and P. aeruginosa on plastic and stainless steel plates. Nebulized 0.5% AKACID Plus was successful in eliminating all hospital pathogens within 340 min. After the use of 0.25% AKACID Plus, MRSA was still detectable on microbial carrier plates. The test concentration of 0.1% AKACID Plus achieved a significant reduction of S. aureus and P. aeruginosa on plastic and stainless steel plates but was sufficient to eradicate only E. coli. These results suggest that nebulized AKACID Plus at a concentration of 0.5% is a potent substance for eradication of pathogenic organisms in the hospital setting.     

Influence of surface characteristics and microstructure on adhesion of bacterial cells onto a type 304 stainless steel

A study was carried out to understand the influence of the surface characteristics/microstructure of a type 304 stainless steel on bacterial adhesion by exposing solution-annealed, sensitized and air-oxidized stainless steel specimens in a culture of Pseudomonas sp. in dilute nutrient broth. Epifluorescence microscopy of the exposed surfaces revealed that the pattern of adhesion as well as number density of bacterial cells was different depending on the metallurgical condition of the substratum. Among the specimens with different microstructures, the sensitized specimens had the highest bacterial density, followed by the solution annealed and the oxidized specimens. The same trend was shown by the total viable counts on the various surfaces, estimated by a plate count technique. The study assumes significance in the context of the widely reported observation of preferential attack of the welded region during microbiologically influenced corrosion of fabricated components.     

Laboratory studies on adhesion of microalgae to hard substrates

Adhesion of Chlorella vulgaris(chlorophyceae), Nitzschia amphibia(bacillariophceae) and Chroococcus minutus(cyanobacteria) to hydrophobic (perspex, titanium and stainless steel 316-L), hydrophilic (glass) and toxic (copper, aluminium brass and admiralty brass) substrata were studied in the laboratory. The influence of surface wettability, surface roughness, pH of the medium, culture age, culture density, cell viability and presence of organic and bacterial films on the adhesion of Nitzschia amphibia was also studied using titanium, stainless steel and glass surfaces. All three organisms attached more on titanium and stainless steel and less on copper and its alloys. The attachment varied significantly with respect to exposure time and different materials. The attachment was higher on rough surfaces when compared to smooth surfaces. Attachment was higher on pH 7 and above. The presence of organic film increased the attachment significantly when compared to control. The number of attached cells was found to be directly proportional to the culture density. Attachment by log phase cells was significantly higher when compared to stationary phase cells. Live cells attached more when compared to heat killed and formalin killed cells. Bacterial films of Pseudomonas putida increased the algal attachment significantly. %     

The effect of molybdenum on biofilm development

Little is known about the formation and effects of biofilms on stainless steel pipes in freshwater environments, particularly as they are considered as a direct replacement for copper pipes for ‘problem’ water. There is some cause for concern especially as stainless steel cannot claim the inherent biocidal potential of copper. As molybdenum is known to be leached out of stainless steel grade 316, in very small amounts, a study was set up to see if molybdenum could retard the development of biofilms. When a comparison of biofilm viable and total cell counts was made between pure molybdenum metal and stainless steel grade 304, it was found that cell counts were significantly higher (P < 0.05) on grade 304 stainless steel after 5 weeks exposure to flowing water (0.64 m s⁻¹). Molybdenum (above a concentration of 1 g L⁻¹) affected the growth rate of Acinetobacter sp, a pioneering bacterium of biofilms in potable water. Received 18 February 1998/ Accepted in revised form 17 May 1999     

Cell surface properties as factors involved in Proteus vulgaris adhesion to stainless steel under starvation conditions

The purpose of these investigations was to evaluate the influence of limited nutrient availability in the culture medium on Proteus vulgaris biofilm formation on surfaces of stainless steel. The relationship between the P. vulgaris adhesion to the abiotic surfaces, the cellular ATP levels, cell surface hydrophobicity and changes in the profiles of extracellular proteins and lipopolysaccharides was examined. In all experimental variants the starvation conditions induced the bacterial cells to adhere to the surfaces of stainless steel. Higher ATP content and lower cell surface hydrophobicity of P. vulgaris cells was observed upon nutrient-limited conditions. Under starvation conditions a reduction in the levels of extracellular low molecular weight proteins was noticed. High molecular weight proteins formed the conditioning layer on stainless steel plates, making the bacteria adhesion process more favorable. The production of low molecular weight carbohydrates promoted more advanced stages of P. vulgaris biofilm formation process on the surfaces of stainless steel upon starvation.     

Adhesion of food-borne bacteria to stainless steel is reduced by food conditioning films

Aims:  Preconditioning of stainless steel with aqueous cod muscle extract significantly impedes subsequent bacterial adhesion most likely due to repelling effects of fish tropomyosin. The purpose of this study was to determine if other food conditioning films decrease or enhance bacterial adhesion to stainless steel.
Methods and Results:  Attachment of Pseudomonas fluorescens AH2 to stainless steel coated with water-soluble coatings of animal origin was significantly reduced as compared with noncoated stainless steel or stainless steel coated with laboratory substrate or extracts of plant origin. Coating with animal extracts also decreases adhesion of other food-relevant bacteria. The manipulation of adhesion was not attributable to growth inhibitory effects. Chemical analysis revealed that the stainless steels were covered by homogenous layers of adsorbed proteins. The presence of tropomyocin was indicated by appearance of proteins with similar molecular weight based in sodium dodecyl sulfate–polyacrylamide gel electrophoresis, in several extracts that reduced adhesion but also extracts not containing this protein reduced bacterial adhesion, indicating that several molecular species may be involved in the phenomenon.
Conclusions:  It is a common perception that food materials facilitate bacterial adhesion to surfaces; however, this study demonstrates that aqueous coatings of food origin may actually reduce bacterial adhesion.
Significance and Impact of the Study:  Compounds from food extracts may potentially be used as nontoxic coatings to reduce bacterial attachment to inert surfaces.     

Cu 型医用抗菌不锈钢在大鼠体内抗细菌感染研究

目的:比较普通304医用不锈钢和304-Cu型医用抗菌不锈钢的体内抗细菌感染性能。方法:将两种不锈钢片涂布浓度为1×107cfu/mL的金黄色葡萄球菌培养24 h,植入SD大鼠胫腓骨肌袋内,继续饲养并在术前及术后第1、4、7、14天进行大体观察、植入部位细菌培养、白细胞计数、组织学观察等检测。结果:普通304不锈钢组术后中度化脓,检测到较多细菌,白细胞增多且有大量的炎症细胞出现;而304-Cu型抗菌不锈钢术后只有轻微化脓,检测到的细菌较少,白细胞数稍有增多但无统计学差异,炎症细胞少,感染程度轻。结论:与医用304不锈钢相比,304-Cu型抗菌不锈钢有较好的抗细菌性能,有一定的抗感染作用。     

Mutual influences of Pseudomonas aeruginosa and Desulfovibrio desulfuricans on their adhesion to stainless steel

The mutual influences of Pseudomonas aeruginosa PAO1 and Desulfovibrio desulfuricans subsp. desulfuricans (ATCC 29577) on their adhesion to stainless steel were investigated in batch and column experiments. It was found that P. aeruginosa promoted the adhesion of D. desulfuricans under conditions of turbulence, but not under quiescent conditions. The enhancement involved the alignment of most D. desulfuricans along P. aeruginosa cells and was attributed to the additional interaction surface area provided by adhered P. aeruginosa to aligning D. desulfuricans cells. A slightly positive effect of preadhered D. desulfuricans on the adhesion of P. aeruginosa was found. Under condition of laminar flow, substantially better adhesion of D. desulfuricans to confluent P. aeruginosa biofilms than to steel was observed. The mutual influences are discussed in terms of more favorable adhesion energies and the influence of changed hydraulic conditions due to the roughness of P. aeruginosa biofilms.     

Development of a CrN/Cu nanocomposite coating on titanium-modified stainless steel for antibacterial activity against Pseudomonas aeruginosa

A relatively simple method was developed to fabricate CrN/Cu nanocomposite coatings using pulsed DC magnetron sputtering for application in antibacterial activity. These nanocomposite coatings were applied on titanium (Ti)-modified stainless steel substrata (D-9 alloy) and the antibacterial activity of these coating with respect to the Gram-negative bacterium Pseudomonas aeruginosa was investigated qualitatively and quantitatively. Scanning electron microscopy, epifluorescence microscope analyses, and total viable counts confirmed that inclusion of copper in the CrN/Cu nanocomposite coatings provided antibacterial activity against P. aeruginosa. The quantitative examination of the bacterial activity of P. aeruginosa was estimated by the survival ratio as calculated from the number of viable cells which formed colonies on nutrient agar plates.     

Effect of growth conditions on cell surface hydrophobicity of multiresistant Pseudomonas aeruginosa strains

Bacterial cell surface hydrophobicity (CSH) may promote colonization. The aim of this study was evaluation of the influence of growth conditions and sensitivity to selected antibiotics on hydrophobic properties of multiresistant P. aeruginosa strains by means of salt aggregation test (SAT) and bacterial adhesion to hydrocarbons (BATH). 30 multiresistant P. aeruginosa strains were included in this study. The variables were: microbiological media type (trypticase-soy agar, trypticase-soy agar with 5% sheep blood and trypticase-soy broth), growth temperature (22, 30 and 37 degrees C) and growth time (24 and 48 h). Most of the investigated strains presented hydrophilic properties in both methods. Cultivation in trypticase-soy broth caused statistically relevant decrease of CSH. Growth temperature did not influence CSH. 48 hours of incubation caused statistically relevant drop of the CSH when compared with 24 h incubation. The sensitivity to selected antibiotics did not vary investigated strains, except form cefepime sensitive and intermediate sensitive strains.     

Interaction of Desulfovibrio desulfuricans biofilms with stainless steel surface and its impact on bacterial metabolism

AIMS: To study the influence of some metallic elements of stainless steel 304 (SS 304) on the development and activity of a sulfate-reducing bacterial biofilm, using as comparison a reference nonmetallic material polymethylmethacrylate (PMMA). METHODS AND RESULTS: Desulfovibrio desulfuricans biofilms were developed on SS 304 and on a reference nonmetallic material, PMMA, in a flow cell system. Steady-state biofilms were metabolically more active on SS 304 than on PMMA. Activity tests with bacteria from both biofilms at steady state also showed that the doubling time was lower for bacteria from SS 304 biofilms. The influence of chromium and nickel, elements of SS 304 composition, was also tested on a cellular suspension of Des. desulfuricans. Nickel decreased the bacterial doubling time, while chromium had no significant effect. CONCLUSIONS: The following mechanism is hypothesized: a Des. desulfuricans biofilm grown on a SS 304 surface in anaerobic conditions leads to the weakening of the metal passive layer and to the dissolution in the bulk phase of nickel ions that have a positive influence on the sulfate-reducing bacteria metabolism. This phenomenon may enhance the biocorrosion process. SIGNIFICANCE AND IMPACT OF THE STUDY: A better understanding of the interactions between metallic surfaces such as stainless steel and bacteria commonly implied in the corrosion phenomena which is primordial to fight biocorrosion.     

Hydrophobicity and adhesion to fish cells and mucus of Vibrio strains isolated from infected fish

The hydrophobicity of 44 Vibrio strains isolated from cultured, diseased gilt-head sea bream (Sparus aurata) was determined. Three different methods were used: (1) microbial adhesion to hydrocarbons (MATH), either with phosphate buffer or with phosphate urea magnesium sulfate (PUM) buffer, (2) aggregation in the presence of salt solutions (SAT), and (3) adhesion to nitrocellulose filters (NCF). The results show that experimental conditions exerted a significant influence on hydrophobicity. Thus, Kendall rank coefficients showed the presence of correlation only for SAT and NCF, and for SAT and the MATH assay with PUM buffer. Moreover, no relationships were observed between the bacterial hydrophobicity estimated with the methods mentioned above and the ability of the strains to adhere to fish mucus or cells. These results indicate that adhesion of pathogenic Vibrio strains to host surfaces is mediated mainly by specific receptor interactions, instead of by hydrophobic interactions.     

Shear stress, temperature, and inoculation concentration influence the adhesion of water-stressed Helicobacter pylori to stainless steel 304 and polypropylene

Although molecular techniques have identified Helicobacter pylori in drinking water-associated biofilms, there is a lack of studies reporting what factors affect the attachment of the bacterium to plumbing materials. Therefore, the adhesion of H. pylori suspended in distilled water to stainless steel 304 (SS304) coupons placed on tissue culture plates subjected to different environmental conditions was monitored. The extent of adhesion was evaluated for different water exposure times, using epifluorescence microscopy to count total cell numbers. High shear stresses-estimated through computational fluid dynamics-negatively influenced the adhesion of H. pylori to the substrata (P < 0.001), a result that was confirmed in similar experiments with polypropylene (P < 0.05). However, the temperature and inoculation concentration appeared to have no effect on adhesion (P > 0.05). After 2 hours, H. pylori cells appeared to be isolated on the surface of SS304 and were able to form small aggregates with longer exposure times. However, the formation of a three-dimensional structure was only very rarely observed. This study suggests that the detection of the pathogen in well water described by other authors can be related to the increased ability of H. pylori to integrate into biofilms under conditions of low shear stress. It will also allow a more rational selection of locations to perform molecular or plate culture analysis for the detection of H. pylori in drinking water-associated biofilms.     

Effect of surface shear stress on the attachment of Pseudomonas fluorescens to stainless steel under defined flow conditions

The application of the radial-flow growth chamber to the study of the initial stages of bacterial adhesion to surfaces under flowing conditions is reported. The adhesive properties of the bacterium Pseudomonas fluorescens (NCIB 9046) to stainless steel (type AISI 316) were found to be highly dependent on surface shear stress and the time and concentration of cells used in the incubation procedure. Maximum levels of adhesion occurred in zones of lowest surface shear stress, particularly less than 6-8 Nm(-2). Adhesion was still noticeable at shear stresses even up to 130 Nm(-2). Significant detachment of cells from a monolayer attached under static conditions was found to occur at surface shear stresses in excess of 10-12 Nm(-2).     

Adhesion of Staphylococcus aureus and Staphylococcus epidermidis to the Episkin reconstructed epidermis model and to an inert 304 stainless steel substrate

AIMS: The aim of this study was to evaluate the respective influence of the physicochemical interactions and the roughness involved in the first part of the biological substrate biocontamination. METHODS AND RESULTS: Therefore we compared the bioadhesion results obtained on the biological model substrate (Episkin) and on a commonly employed inert substrate (AISI 304 stainless steel), frequently used either in dermatology or in development of medical devices. The two studied strains presented different characteristics, both physicochemical and microbiological. Staphylococcus epidermidis, a relatively hydrophobic bacteria capable of exchanging interactions which are principally of the van der Waals type, adhered more to 304 steel than to the surface of reconstituted skin. As for S. aureus, an essentially basic, hydrophilic bacteria, was more adherent to Episkin (a bipolar, hydrophilic substrate) than to stainless steel (a unipolar, basic, hydrophilic substrate). CONCLUSIONS: In the absence of electrostatic interactions, the adhesion of substrate-dependent bacteria to the surface of reconstituted skin was dependent upon the balance between gamma(LW), gamma(+) and gamma(-). SIGNIFICANCE AND IMPACT OF THE STUDY: Consequently, so as to restrict microbial adhesion and reduce adhesive binding between micro-organisms and the surface of the skin, it would be preferable to render this substrate hydrophobic and apolar through the use of appropriate surface treatment.     

An electrochemical method for functionalization of a 316L stainless steel surface being used as a stent in coronary surgery: irreversible immobilization of fibronectin for the enhancement of endothelial cell attachment

An electrochemistry-based method for the formation of functionalized alkanethiol layers on a 316L stainless steel surface was developed. The method was efficient in forming a very stable, irreversibly-attached COOH-terminated (mercaptoundecanoic acid) surface layer. This layer was used as a ‘linker’ to immobilize the extracellular matrix protein fibronectin to the 316L stainless steel surface. Fibronectin was irreversibly attached to the surface and, unlike physisorbed fibronectin, resisted detachment more in aggressive 0.1 M NaOH under sonication. The fibronectin-modified 316L stainless steel surface was more biocompatible towards attachment of endothelial cells than a bare (unmodified) 316L stainless steel surface, yielding a 25% improvement in cell density.