Oligosaccharide analyses of glycopeptides of horseradish peroxidase by thermal-assisted partial acid hydrolysis and mass spectrometry

Thermal-assisted partial acid hydrolysis of the carbohydrate moieties of N-glycosylated peptides of horseradish peroxidase (HRP) is used to generate oligosaccharide cleavage ladders. These ladders allow direct reading of components of the oligosaccharides by mass spectrometry. Acid hydrolysis performed with 1.4, 3.1, 4.5, or 6.7M trifluoroacetic acid at 37, 65, or 95 degrees C for 30min to 24h hydrolyzed mainly the oligosaccharide units of glycopeptides with least peptide bond or amino acid side chain hydrolysis. Tryptic N-glycosylated peptides from HRP with molecular weights of 2533, 2612, 3355, 3673, and 5647Da were used as test systems in these experiments. Data showed that the most labile group of oligosaccharides is the fucose (Fuc) and the majority of the end cleavage products are peptides with one or no N-acetylglucosamine (GlcNAc) residue linked to Asparagine (Asn). Additionally, the data agree with previous reports that glycopeptides 3355 and 3673Da carry an oligosaccharide (Xyl)Man3(Fuc)GlcNAc2, glycopeptide 5647Da carries two oligosaccharides (Xyl)Man3(Fuc)GlcNAc2, and glycopeptides 2612 and 2533Da carry (Xyl)Man3GlcNAc2 and (Fuc)GlcNAc, respectively. However, the glycosylation site of the 2612Da peptide at Asn286 is partially occupied. This method is particularly useful in identifying glycopeptides and obtaining monosaccharide compositions of glycopeptides.     

The folding process of acylphosphatase from Escherichia coli is remarkably accelerated by the presence of a disulfide bond

The acylphosphatase from Escherichia coli (EcoAcP) is the first AcP so far studied with a disulfide bond. A mutational variant of the enzyme lacking the disulfide bond has been produced by substituting the two cysteine residues with alanine (EcoAcP mutational variant C5A/C49A, mutEcoAcP). The native states of the two protein variants are similar, as shown by far-UV and near-UV circular dichroism and dynamic light-scattering measurements. From unfolding experiments at equilibrium using intrinsic fluorescence and far-UV circular dichroism as probes, EcoAcP shows an increased conformational stability as compared with mutEcoAcP. The wild-type protein folds according to a two-state model with a very fast rate constant (k_F^H2O = 72,600 s^− 1), while mutEcoAcP folds ca 1500-fold slower, via the accumulation of a partially folded species. The correlation between the hydrophobicity of the polypeptide chain and the folding rate, found previously in the AcP-like structural family, is maintained only when considering the mutant but not the wild-type protein, which folds much faster than expected from this correlation. Similarly, the correlation between the relative contact order and the folding rate holds only for mutEcoAcP. The correlation also holds for EcoAcP, provided the relative contact order value is recalculated by considering the disulfide bridge as an alternate path for the backbone to determine the shortest sequence separation between contacting residues. These results indicate that the presence of a disulfide bond in a protein is an important determinant of the folding rate and allows its contribution to be determined in quantitative terms.     

Mutations of Trp275 and Trp397 altered the binding selectivity of Vibrio carchariae chitinase A

Point mutations of the active-site residues Trp168, Tyr171, Trp275, Trp397, Trp570 and Asp392 were introduced to Vibrio carchariae chitinase A. The modeled 3D structure of the enzyme illustrated that these residues fully occupied the substrate binding cleft and it was found that their mutation greatly reduced the hydrolyzing activity against pNP-[GlcNAc]₂ and colloidal chitin. Mutant W397F was the only exception, as it instead enhanced the hydrolysis of the pNP substrate to 142% and gave no activity loss towards colloidal chitin. The kinetic study with the pNP substrate demonstrated that the mutations caused impaired K_m and k_cat values of the enzyme. A chitin binding assay showed that mutations of the aromatic residues did not change the binding equilibrium. Product analysis by thin layer chromatography showed higher efficiency of W275G and W397F in G4–G6 hydrolysis over the wild type enzyme. Though the time course of colloidal chitin hydrolysis displayed no difference in the cleavage behavior of the chitinase variants, the time course of G6 hydrolysis exhibited distinct hydrolytic patterns between wild-type and mutants W275G and W397F. Wild type initially hydrolyzed G6 to G4 and G2, and finally G2 was formed as the major end product. W275G primarily created G2–G5 intermediates, and later G2 and G3 were formed as stable products. In contrast, W397F initially produced G1–G5, and then the high-M_r intermediates (G3–G5) were broken down to G1 and G2 end products. This modification of the cleavage patterns of chitooligomers suggested that residues Trp275 and Trp397 are involved in defining the binding selectivity of the enzyme to soluble substrates.     

Order of steps in the cytochrome C folding pathway: evidence for a sequential stabilization mechanism

Previous work used hydrogen exchange (HX) experiments in kinetic and equilibrium modes to study the reversible unfolding and refolding of cytochrome c (Cyt c) under native conditions. Accumulated results now show that Cyt c is composed of five individually cooperative folding units, called foldons, which unfold and refold as concerted units in a stepwise pathway sequence. The first three steps of the folding pathway are linear and sequential. The ordering of the last two steps has been unclear because the fast HX of the amino acid residues in these foldons has made measurement difficult. New HX experiments done under slower exchange conditions show that the final two foldons do not unfold and refold in an obligatory sequence. They unfold separately and neither unfolding obligately contains the other, as indicated by their similar unfolding surface exposure and the specific effects of destabilizing and stabilizing mutations, pH change, and oxidation state. These results taken together support a sequential stabilization mechanism in which folding occurs in the native context with prior native-like structure serving to template the stepwise formation of subsequent native-like foldon units. Where the native structure of Cyt c requires sequential folding, in the first three steps, this is found. Where structural determination is ambiguous, in the final two steps, alternative parallel folding is found.     

Kinetic isotope effects reveal the presence of significant secondary structure in the transition state for the folding of the N-terminal domain of L9

Our present understanding of the nature of the transition state for protein folding depends predominantly on studies where individual side-chain contributions are mapped out by mutational analysis (phi value analysis). This approach, although extremely powerful, does not in general provide direct information about the formation of backbone hydrogen bonds. Here, we report the results of amide H/D isotope effect studies that probe the development of hydrogen bonded interactions in the transition state for the folding of a small alpha-beta protein, the N-terminal domain of L9. Replacement of amide protons by deuterons in a solvent of constant isotopic composition destabilized the domain, decreasing both its T(m) and Delta G(0) of unfolding. The folding rate also decreased. The parameter Phi(H/D), defined as the ratio of the effect of isotopic substitution upon the activation free energy to the equilibrium free energy was determined to be 0.6 in a D(2)O background and 0.75 in a H(2)O background, indicating that significant intraprotein hydrogen bond interactions are developed in the transition state for the folding of NTL9. The value is in remarkably good agreement with more traditional measures of the position of the transition state, which report on the relative burial of surface area. The results provide a picture of a compact folding transition state containing significant secondary structure. Indirect analysis argues that the bulk of the kinetic isotope effect arises from the beta-sheet-rich region of the protein, and suggests that the development of intraprotein hydrogen bonds in this region plays a critical role in the folding of NTL9.     

Mapping the structure of folding cores in TIM barrel proteins by hydrogen exchange mass spectrometry: the roles of motif and sequence for the indole-3-glycerol phosphate synthase from Sulfolobus solfataricus

To test the roles of motif and amino acid sequence in the folding mechanisms of TIM barrel proteins, hydrogen-deuterium exchange was used to explore the structure of the stable folding intermediates for the of indole-3-glycerol phosphate synthase from Sulfolobus solfataricus (sIGPS). Previous studies of the urea denaturation of sIGPS revealed the presence of an intermediate that is highly populated at approximately 4.5 M urea and contains approximately 50% of the secondary structure of the native (N) state. Kinetic studies showed that this apparent equilibrium intermediate is actually comprised of two thermodynamically distinct species, I(a) and I(b). To probe the location of the secondary structure in this pair of stable on-pathway intermediates, the equilibrium unfolding process of sIGPS was monitored by hydrogen-deuterium exchange mass spectrometry. The intact protein and pepsin-digested fragments were studied at various concentrations of urea by electrospray and matrix-assisted laser desorption ionization time-of-flight mass spectrometry, respectively. Intact sIGPS strongly protects at least 54 amide protons from hydrogen-deuterium exchange in the intermediate states, demonstrating the presence of stable folded cores. When the protection patterns and the exchange mechanisms for the peptides are considered with the proposed folding mechanism, the results can be interpreted to define the structural boundaries of I(a) and I(b). Comparison of these results with previous hydrogen-deuterium exchange studies on another TIM barrel protein of low sequence identify, alpha-tryptophan synthase (alphaTS), indicates that the thermodynamic states corresponding to the folding intermediates are better conserved than their structures. Although the TIM barrel motif appears to define the basic features of the folding free energy surface, the structures of the partially folded states that appear during the folding reaction depend on the amino acid sequence. Markedly, the good correlation between the hydrogen-deuterium exchange patterns of sIGPS and alphaTS with the locations of hydrophobic clusters defined by isoleucine, leucine, and valine residues suggests that branch aliphatic side-chains play a critical role in defining the structures of the equilibrium intermediates.     

Structure and dynamics of the force-generating domain of myosin probed by multifrequency electron paramagnetic resonance

Spin-labeling and multifrequency EPR spectroscopy were used to probe the dynamic local structure of skeletal myosin in the region of force generation. Subfragment 1 (S1) of rabbit skeletal myosin was labeled with an iodoacetamide spin label at C707 (SH1). X-and W-band EPR spectra were recorded for the apo state and in the presence of ADP and nucleotide analogs. EPR spectra were analyzed in terms of spin-label rotational motion within myosin by fitting them with simulated spectra. Two models were considered: rapid-limit oscillation (spectrum-dependent on the orientational distribution only) and slow restricted motion (spectrum-dependent on the rotational correlation time and the orientational distribution). The global analysis of spectra obtained at two microwave frequencies (9.4 GHz and 94 GHz) produced clear support for the second model and enabled detailed determination of rates and amplitudes of rotational motion and resolution of multiple conformational states. The apo biochemical state is well-described by a single structural state of myosin (M) with very restricted slow motion of the spin label. The ADP-bound biochemical state of myosin also reveals a single structural state (M*, shown previously to be the same as the post-powerstroke ATP-bound state), with less restricted slow motion of the spin label. In contrast, the extra resolution available at 94 GHz reveals that the EPR spectrum of the S1.ADP.V_i-bound biochemical state of myosin, which presumably mimics the S1.ADP.P_i state, is resolved clearly into three spectral components (structural states). One state is indistinguishable from that of the ADP-bound state (M*) and is characterized by moderate restriction and slow motion, with a mole fraction of 16%. The remaining 84% (M**) contains two additional components and is characterized by fast rotation about the x axis of the spin label. After analyzing EPR spectra, myosin ATPase activity, and available structural information for myosin II, we conclude that post-powerstroke and pre-powerstroke structural states (M* and M**) coexist in the S1.ADP.V_i biochemical state. We propose that the pre-powerstroke state M** is characterized by two structural states that could reflect flexibility between the converter and N-terminal domains of myosin.     

Topology and sequence in the folding of a TIM barrel protein: global analysis highlights partitioning between transient off-pathway and stable on-pathway folding intermediates in the complex folding mechanism of a (betaalpha)8 barrel of unknown function from B. subtilis

The relative contributions of chain topology and amino acid sequence in directing the folding of a (betaalpha)(8) TIM barrel protein of unknown function encoded by the Bacillus subtilis iolI gene (IOLI) were assessed by reversible urea denaturation and a combination of circular dichroism, fluorescence and time-resolved fluorescence anisotropy spectroscopy. The equilibrium reaction for IOLI involves, in addition to the native and unfolded species, a stable intermediate with significant secondary structure and stability and self-associated forms of both the native and intermediate states. Global kinetic analysis revealed that the unfolded state partitions between an off-pathway refolding intermediate and the on-pathway equilibrium intermediate early in folding. Comparisons with the folding mechanisms of two other TIM barrel proteins, indole-3-glycerol phosphate synthase from the thermophile Sulfolobus solfataricus (sIGPS) and the alpha subunit of Escherichia coli tryptophan synthase (alphaTS), reveal striking similarities that argue for a dominant role of the topology in both early and late events in folding. Sequence-specific effects are apparent in the magnitudes of the relaxation times and relative stabilities, in the presence of additional monomeric folding intermediates for alphaTS and sIGPS and in rate-limiting proline isomerization reactions for alphaTS.     

Electrostatic contributions to the kinetics and thermodynamics of protein assembly

The role of electrostatic interactions in the assembly of a native protein structure was studied using fragment complementation. Contributions of salt, pH, or surface charges to the kinetics and equilibrium of calbindin D(9k) reconstitution was measured in the presence of Ca(2+) using surface plasmon resonance and isothermal titration calorimetry. Whereas surface charge substitutions primarily affect the dissociation rate constant, the association rates are correlated with subdomain net charge in a way expected for Coulomb interactions. The affinity is reduced in all mutants, with the largest effect (260-fold) observed for the double mutant K25E+K29E. At low net charge, detailed charge distribution is important, and charges remote from the partner EF-hand have less influence than close ones. The effects of salt and pH on the reconstitution are smaller than mutational effects. The interaction between the wild-type EF-hands occurs with high affinity (K(A) = 1.3 x 10(10) M(-1); K(D) = 80 pM). The enthalpy of association is overall favorable and there appears to be a very large favorable entropic contribution from the desolvation of hydrophobic surfaces that become buried in the complex. Electrostatic interactions contribute significantly to the affinity between the subdomains, but other factors, such as hydrophobic interactions, dominate.     

Recent progress on obtaining theoretical and experimental support for the “E-pathway hypothesis” of coupled transmembrane electron and proton transfer in dihaem-containing quinol:fumarate reductase

Reconciliation of apparently contradictory experimental results obtained on the quinol: fumarate reductase (QFR), a dihaem-containing respiratory membrane protein complex from Wolinella succinogenes, was previously obtained by the proposal of the so-called E-pathway hypothesis. According to this hypothesis, transmembrane electron transfer via the haem groups is strictly coupled to co-transfer of protons via a transiently established, novel pathway, proposed to contain the side chain of residue Glu-C180 and the distal haem ring-C propionate as the most prominent components. This hypothesis has recently been supported by both theoretical and experimental results. Multiconformation continuum electrostatics calculations predict Glu-C180 to undergo a combination of proton uptake and conformational change upon haem reduction. Strong experimental support for the proposed role of Glu-C180 in the context of the “E-pathway hypothesis” is provided by the effects of replacing Glu-C180 with Gln or Ile by site-directed mutagenesis, the consequences of these mutations for the viability of the resulting mutants, together with the structural and functional characterisation of the corresponding variant enzymes, and the comparison of redox-induced Fourier-transform infrared (FTIR) difference spectra for the wild type and Glu-C180 → Gln variant. A possible haem propionate involvement has recently been supported by combining ¹³C-haem propionate labelling with redox-induced FTIR difference spectroscopy.     

Structure and mechanism of HpcH: a metal ion dependent class II aldolase from the homoprotocatechuate degradation pathway of Escherichia coli

Microorganisms are adept at degrading chemically resistant aromatic compounds. One of the longest and most well characterized aromatic catabolic pathways is the 4-hydroxyphenylacetic acid degradation pathway of Escherichia coli. The final step involves the conversion of 4-hydroxy-2-oxo-heptane-1,7-dioate into pyruvate and succinic semialdehyde. This reaction is catalyzed by 4-hydroxy-2-oxo-heptane-1,7-dioate aldolase (HpcH), a member of the divalent metal ion dependent class II aldolase enzymes that have great biosynthetic potential. We have solved the crystal structure of HpcH in the apo form, and with magnesium and the substrate analogue oxamate bound, to 1.6 A and 2.0 A, respectively. Comparison with similar structures of the homologous 2-dehydro-3-deoxygalactarate aldolase, coupled with site-directed mutagenesis data, implicate histidine 45 and arginine 70 as key catalytic residues.     

2D-HPLC and MALDI-TOF/TOF analysis of barley proteins glycated during brewing

The barley proteins have been the subject of interests of many research groups dealing with barley grains, malt and beer. The proteins which remain intact after harsh malting conditions influence the quality and flavor of beer. The characteristic feature of the proteins present in malt and beer is their extensive modification with carbohydrates, mainly glucose that comes from the starch degradation during technological processes. The degree of the protein glycation has an effect on the quality of malt and beer and on the properties of the beer foam. A combination of two-dimensional high performance liquid chromatography (2D-HPLC) and matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF/TOF MS) was used for the analysis of the protein extracts that were reduced, alkylated, and degraded enzymatically without prior protein separation. This so-called "shot-gun" approach enabled us to determine glycation sites in one third of the proteins identified in the study and to propose potential glycation markers for fast and efficient monitoring during malting.     

Insecticidal peptides from the theraposid spider Brachypelma albiceps: An NMR-based model of Ba2

Soluble venom and purified fractions of the theraposid spider Brachypelma albiceps were screened for insecticidal peptides based on toxicity to crickets. Two insecticidal peptides, named Ba1 and Ba2, were obtained after the soluble venom was separated by high performance liquid chromatography and cation exchange chromatography. The two insecticidal peptides contain 39 amino acid residues and three disulfide bonds, and based on their amino acid sequence, they are highly identical to the insecticidal peptides from the theraposid spiders Aphonopelma sp. from the USA and Haplopelma huwenum from China indicating a relationship among these genera. Although Ba1 and Ba2 were not able to modify currents in insect and vertebrate cloned voltage-gated sodium ion channels, they have noteworthy insecticidal activities compared to classical arachnid insecticidal toxins indicating that they might target unknown receptors in insect species. The most abundant insecticidal peptide Ba2 was submitted to NMR spectroscopy to determine its 3-D structure; a remarkable characteristic of Ba2 is a cluster of basic residues, which might be important for receptor recognition.     

PLA2-mediated catalytic activation of its inhibitor 25-acetyl-petrosaspongiolide M: serendipitous identification of a new PLA2 suicide inhibitor

25-Acetyl-petrosaspongiolide M (PMAc) (1), a mild non-covalent PLA(2) inhibitor, unexpectedly recovers, after incubation with bvPLA(2), the ability to covalently modify the enzyme target. This study demonstrates the catalytic effect of bvPLA(2) in converting 1 in its deacetylated congener petrosaspongiolide M (PM) (2), a strong covalent PLA(2) inhibitor whose molecular mechanism of inhibition has already been clarified. Moreover, our findings outline the potential role of PMAc as anti-inflammatory pro-drug, by virtue of its ability of delivering the active PM agent at the site of inflammation, functioning as a suicide inhibitor.     

The effect of additional disulfide bonds on the stability and folding of ribonuclease A

The significant contribution of disulfide bonds to the conformational stability of proteins is generally considered to result from an entropic destabilization of the unfolded state causing a faster escape of the molecules to the native state. However, the introduction of extra disulfide bonds into proteins as a general approach to protein stabilization yields rather inconsistent results. By modeling studies, we selected positions to introduce additional disulfide bonds into ribonuclease A at regions that had proven to be crucial for the initiation of the folding or unfolding process, respectively. However, only two out of the six variants proved to be more stable than unmodified ribonuclease A. The comparison of the thermodynamic and kinetic data disclosed a more pronounced effect on the unfolding reaction for all variants regardless of the position of the extra disulfide bond. Native-state proteolysis indicated a perturbation of the native state of the destabilized variants that obviously counterbalances the stability gain by the extra disulfide bond.     

Analysis of N-glycosylation in maize cytokinin oxidase/dehydrogenase 1 using a manual microgradient chromatographic separation coupled offline to MALDI-TOF/TOF mass spectrometry

Cytokinin oxidase/dehydrogenase (CKO; EC 1.5.99.12) irreversibly degrades the plant hormones cytokinins. A recombinant maize isoenzyme 1 (ZmCKO1) produced in the yeast Yarrowia lipolytica was subjected to enzymatic deglycosylation by endoglycosidase H. Spectrophotometric assays showed that both activity and thermostability of the enzyme decreased after the treatment at non-denaturing conditions indicating the biological importance of ZmCKO1 glycosylation. The released N-glycans were purified with graphitized carbon sorbent and analyzed by MALDI-TOF MS. The structure of the measured high-mannose type N-glycans was confirmed by tandem mass spectrometry (MS/MS) on a Q-TOF instrument with electrospray ionization. Further experiments were focused on direct analysis of sugar binding. Peptides and glycopeptides purified from tryptic digests of recombinant ZmCKO1 were separated by reversed-phase chromatography using a manual microgradient device; the latter were then subjected to offline-coupled analysis on a MALDI-TOF/TOF instrument. Glycopeptide sequencing by MALDI-TOF/TOF MS/MS demonstrated N-glycosylation at Asn52, 63, 134, 294, 323 and 338. The bound glycans contained 3-14 mannose residues. Interestingly, Asn134 was found only partially glycosylated. Asn338 was the sole site to carry large glycan chains exceeding 25 mannose residues. This observation demonstrates that contrary to a previous belief, the heterologous expression in Y. lipolytica may lead to locally hyperglycosylated proteins.     

Bacterial species identification from MALDI-TOF mass spectra through data analysis and machine learning

At present, there is much variability between MALDI-TOF MS methodology for the characterization of bacteria through differences in e.g., sample preparation methods, matrix solutions, organic solvents, acquisition methods and data analysis methods. After evaluation of the existing methods, a standard protocol was developed to generate MALDI-TOF mass spectra obtained from a collection of reference strains belonging to the genera Leuconostoc, Fructobacillus and Lactococcus. Bacterial cells were harvested after 24 h of growth at 28 °C on the media MRS or TSA. Mass spectra were generated, using the CHCA matrix combined with a 50:48:2 acetonitrile:water:trifluoroacetic acid matrix solution, and analyzed by the cell smear method and the cell extract method. After a data preprocessing step, the resulting high quality data set was used for PCA, distance calculation and multi-dimensional scaling. Using these analyses, species-specific information in the MALDI-TOF mass spectra could be demonstrated. As a next step, the spectra, as well as the binary character set derived from these spectra, were successfully used for species identification within the genera Leuconostoc, Fructobacillus, and Lactococcus. Using MALDI-TOF MS identification libraries for Leuconostoc and Fructobacillus strains, 84% of the MALDI-TOF mass spectra were correctly identified at the species level. Similarly, the same analysis strategy within the genus Lactococcus resulted in 94% correct identifications, taking species and subspecies levels into consideration. Finally, two machine learning techniques were evaluated as alternative species identification tools. The two techniques, support vector machines and random forests, resulted in accuracies between 94% and 98% for the identification of Leuconostoc and Fructobacillus species, respectively.     

The membrane environment modulates self-association of the human GpA TM domain—Implications for membrane protein folding and transmembrane signaling

The influence of lipid bilayer properties on a defined and sequence-specific transmembrane helix-helix interaction is not well characterized yet. To study the potential impact of changing bilayer properties on a sequence-specific transmembrane helix-helix interaction, we have traced the association of fluorescent-labeled glycophorin A transmembrane peptides by fluorescence spectroscopy in model membranes with varying lipid compositions. The observed changes of the glycophorin A dimerization propensities in different lipid bilayers suggest that the lipid bilayer thickness severely influences the monomer-dimer equilibrium of this transmembrane domain, and dimerization was most efficient under hydrophobic matching conditions. Moreover, cholesterol considerably promotes self-association of transmembrane helices in model membranes by affecting the lipid acyl chain ordering. In general, the order of the lipid acyl chains appears to be an important factor involved in determining the strength and stability of transmembrane helix-helix interactions. As discussed, the described influences of membrane properties on transmembrane helix-helix interactions are highly important for understanding the mechanism of transmembrane protein folding and functioning as well as for gaining a deeper insight into the regulation of signal transduction via membrane integral proteins by bilayer properties.     

Tertiary structure and carbohydrate recognition by the chitin-binding domain of a hyperthermophilic chitinase from Pyrococcus furiosus

A chitinase is a hyperthermophilic glycosidase that effectively hydrolyzes both α and β crystalline chitins; that studied here was engineered from the genes PF1233 and PF1234 of Pyrococcus furiosus. This chitinase has unique structural features and contains two catalytic domains (AD1 and AD2) and two chitin-binding domains (ChBDs; ChBD1 and ChBD2). A partial enzyme carrying AD2 and ChBD2 also effectively hydrolyzes crystalline chitin. We determined the NMR and crystal structures of ChBD2, which significantly enhances the activity of the catalytic domain. There was no significant difference between the NMR and crystal structures. The overall structure of ChBD2, which consists of two four-stranded β-sheets, was composed of a typical β-sandwich architecture and was similar to that of other carbohydrate-binding module 2 family proteins, despite low sequence similarity. The chitin-binding surface identified by NMR was flat and contained a strip of three solvent-exposed Trp residues (Trp274, Trp308 and Trp326) flanked by acidic residues (Glu279 and Asp281). These acidic residues form a negatively charged patch and are a characteristic feature of ChBD2. Mutagenesis analysis indicated that hydrophobic interaction was dominant for the recognition of crystalline chitin and that the acidic residues were responsible for a higher substrate specificity of ChBD2 for chitin compared with that of cellulose. These results provide the first structure of a hyperthermostable ChBD and yield new insight into the mechanism of protein-carbohydrate recognition. This is important in the development of technology for the exploitation of biomass.     

Probing the self-assembly and the accompanying structural changes of hydrophobin SC3 on a hydrophobic surface by mass spectrometry

The fungal class I hydrophobin SC3 self-assembles into an amphipathic membrane at hydrophilic-hydrophobic interfaces such as the water-air and water-Teflon interface. During self-assembly, the water-soluble state of SC3 proceeds via the intermediate alpha-helical state to the stable end form called the beta-sheet state. Self-assembly of the hydrophobin at the Teflon surface is arrested in the alpha-helical state. The beta-sheet state can be induced at elevated temperature in the presence of detergent. The structural changes of SC3 were monitored by various mass spectrometry techniques. We show that the so-called second loop of SC3 (C39-S72) has a high affinity for Teflon. Binding of this part of SC3 to Teflon was accompanied by the formation of alpha-helical structure and resulted in low solvent accessibility. The solvent-protected region of the second loop extended upon conversion to the beta-sheet state. In contrast, the C-terminal part of SC3 became more exposed to the solvent. The results indicate that the second loop of class I hydrophobins plays a pivotal role in self-assembly at the hydrophilic-hydrophobic interface. Of interest, this loop is much smaller in case of class II hydrophobins, which may explain the differences in their assembly.