The Ralstonia eutropha PhaR Protein Couples Synthesis of the PhaP Phasin to the Presence of Polyhydroxybutyrate in Cells and Promotes Polyhydroxybutyrate Production

Polyhydroxyalkanoates (PHAs) are polyoxoesters that are produced by many bacteria and that accumulate as intracellular granules. Phasins (PhaP) are proteins that accumulate during PHA synthesis, bind PHA granules, and promote further PHA synthesis. Interestingly, PhaP accumulation seems to be strictly dependent on PHA synthesis, which is catalyzed by the PhaC PHA synthase. Here we have tested the effect of the Ralstonia eutropha PhaR protein on the regulation of PhaP accumulation. R. eutropha strains with phaR, phaC, and/or phaP deletions were constructed, and PhaP accumulation was measured by immunoblotting. The wild-type strain accumulated PhaP in a manner dependent on PHA production, and the phaC deletion strain accumulated no PhaP, as expected. In contrast, both the phaR and the phaR phaC deletion strains accumulated PhaP to higher levels than did the wild type. This result implies that PhaR is a negative regulator of PhaP accumulation and that PhaR specifically prevents PhaP from accumulating in cells that are not producing PHA. Transfer of the R. eutropha phaR, phaP, and PHA biosynthesis (phaCAB) genes into a heterologous system, Escherichia coli, was sufficient to reconstitute the PhaR/PhaP regulatory system, implying that PhaR both regulates PhaP accumulation and responds to PHA directly. Deletion of phaR caused a decrease in PHA yields, and a phaR phaP deletion strain exhibited a more severe PHA defect than a phaP deletion strain, implying that PhaR promotes PHA production and does this at least partially through a PhaP-independent pathway. Models for regulatory roles of PhaR in regulating PhaP and promoting PHA production are presented.     

Novel pathway for catabolism of the organic sulfur compound 3,3'-dithiodipropionic acid via 3-mercaptopropionic acid and 3-Sulfinopropionic acid to propionyl-coenzyme A by the aerobic bacterium Tetrathiobacter mimigardefordensis strain DPN7

The hitherto unstudied microbial degradation of the organic disulfide 3,3'-dithiodipropionic acid (DTDP) was investigated with the recently described bacterium Tetrathiobacter mimigardefordensis strain DPN7(T) (DSM 17166(T); LMG 22922(T)), which is able to use DTDP as the sole carbon source for growth. 3-Mercaptopropionic acid (3MP) and 3-sulfinopropionic acid (3SP) were detected in the growth medium and occurred as intermediates during DTDP degradation. To identify genes coding for enzymes of DTDP catabolism, Tn5::mob-induced mutants of T. mimigardefordensis were generated. Screening of transposon mutant libraries yielded many mutants fully or partially impaired in utilizing DTDP as a carbon source. Mapping of the insertion loci in some mutants identified four disrupted open reading frames (ORFs) with putative metabolic functions. The ORFs were assigned function on the basis of homologies with lpdA (EC 1.8.1.4), cdo (EC 1.13.11.20), sucCD (EC 6.2.1.5), and acnB (EC 4.2.1.3). Tn5::mob insertions occurred additionally in the vicinity of heat shock protein-encoding genes. The predicted function of the LpdA homologue in T. mimigardefordensis is cleavage of the disulfide bond of DTDP to form two molecules of 3MP. Cdo catalyzes the conversion of the sulfhydryl group of 3MP, yielding the corresponding sulfinic acid, 3SP. SucCD exhibits thiokinase activity, ligating coenzyme A (CoA) with 3SP to form 3SP-CoA. Afterwards, an elimination of sulfite via a putative desulfinase is expected. acnB encodes a putative 2-methylisocitrate dehydratase. Therefore, a new pathway is proposed for the catabolism of DTDP via 3MP, 3SP, and 3SP-CoA toward propionyl-CoA, which is then further catabolized via the 2-methylcitric acid cycle in T. mimigardefordensis.     

Rearrangement of gene order in the phaCAB operon leads to effective production of ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] in genetically engineered Escherichia coli

Ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] [UHMW-P(3HB)] synthesized by genetically engineered Escherichia coli is an environmentally friendly bioplastic material which can be processed into strong films or fibers. An operon of three genes (organized as phaCAB) encodes the essential proteins for the production of P(3HB) in the native producer, Ralstonia eutropha. The three genes of the phaCAB operon are phaC, which encodes the polyhydroxyalkanoate (PHA) synthase, phaA, which encodes a 3-ketothiolase, and phaB, which encodes an acetoacetyl coenzyme A (acetoacetyl-CoA) reductase. In this study, the effect of gene order of the phaCAB operon (phaABC, phaACB, phaBAC, phaBCA, phaCAB, and phaCBA) on an expression plasmid in genetically engineered E. coli was examined in order to determine the best organization to produce UHMW-P(3HB). The results showed that P(3HB) molecular weights and accumulation levels were both dependent on the order of the pha genes relative to the promoter. The most balanced production result was achieved in the strain harboring the phaBCA expression plasmid. In addition, analysis of expression levels and activity for P(3HB) biosynthesis enzymes and of P(3HB) molecular weight revealed that the concentration of active PHA synthase had a negative correlation with P(3HB) molecular weight and a positive correlation with cellular P(3HB) content. This result suggests that the level of P(3HB) synthase activity is a limiting factor for producing UHMW-P(3HB) and has a significant impact on P(3HB) production.     

Inhibition of acetate and propionate assimilation by itaconate via propionyl-CoA carboxylase in isocitrate lyase-negative purple bacterium Rhodospirillum rubrum

The PCR cloning strategy for type II polyhydroxyalkanoate (PHA) biosynthesis genes established previously for Pseudomonas was successfully applied to Burkholderia caryophylli strain AS 1.2741. The whole pha locus containing PHA synthase genes phaC1, phaC2 and PHA depolymerase gene phaZ was cloned. The complete open reading frames of phaC1(Bc), phaC2(Bc) and phaZ(Bc) were identified. Sequence analyses of the phaC1(Bc), phaZ(Bc) and phaC2(Bc) showed more than 77.7%, 73.7% and 68.5% identities compared with the corresponding pha loci of the known Pseudomonas strains, respectively. The functional expression of the phaC1(Bc) or phaC2(Bc) in Escherichia coli strain KM32B (fadB deleted mutant) showed the abilities of PHA production by the estimated PHA synthase genes. Over 1% PHA consisting of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD) was detected from cells of recombinant E. coli KM32B (pHXM11) harboring phaC1(Bc), grown on octanoate. At the same time over 3% of PHA consisting of 3HO and 3HD was produced from cells of recombinant E. coli KM32B (pHXM21) harboring phaC2(BC), grown on decanoate. Results showed the PCR cloning strategy developed previously can be applied to non-Pseudomonas strains such as Burkholderia in this case. This result also provided evidence for the presumption that the Burkholderia strain possesses not only polyhydroxybutyrate synthase genes, but also synthase for medium-chain-length polyhydroxyalkanoates consisting of 3HHx, 3HO and 3HD.     

Effective enhancement of short-chain-length-medium-chain-length polyhydroxyalkanoate copolymer production by coexpression of genetically engineered 3-ketoacyl-acyl-carrier-protein synthase III (fabH) and polyhydroxyalkanoate synthesis genes

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters that have a wide variety of physical properties dependent on the lengths of the pendant groups of the monomer units in the polymer. PHAs composed of mostly short-chain-length (SCL) monomers are often stiff and brittle, whereas PHAs composed of mostly medium-chain-length (MCL) monomers are elastomeric in nature. SCL-MCL PHA copolymers can have properties between the two states, dependent on the ratio of SCL and MCL monomers in the copolymer. It is desirable to elucidate new and low cost ways to produce PHA composed of mostly SCL monomer units with a small mol % of MCL monomers from renewable resources, since this type of SCL-MCL PHA copolymer has superior qualities compared to SCL homopolymer. To address this issue, we have created strains of recombinant E. coli capable of producing beta-ketothiolase (PhbA) and acetoacetyl-CoA synthase (PhbB) from Ralstonia eutropha, genetically engineered 3-ketoacyl-ACP synthase III (FabH) from Escherichia coli, and genetically engineered PHA synthases (PhaC) from Pseudomonas sp. 61-3 to enhance the production of SCL-MCL PHA copolymers from glucose. The cumulative effect of having two monomer-supplying pathways and genetically engineered PHA synthases resulted in higher accumulated amounts of SCL-MCL PHA copolymer from glucose. Polymers were isolated from two recombinant E. coli strains, the first harboring the phbAB, fabH(F87T), and phaC1(SCQM) genes and the second harboring the phbAB, fabH(F87W), and phaC1(SCQM) genes. The thermal and physical properties of the isolated polymers were characterized. It was found that even a very low mol % of MCL monomer in a SCL-MCL PHA copolymer had dramatic effects on the thermal properties of the copolymers.     

Analysis of in vivo substrate specificity of the PHA synthase from Ralstonia eutropha: formation of novel copolyesters in recombinant Escherichia coli

In order to investigate the in vivo substrate specificity of the type I polyhydroxyalkanoate (PHA) synthase from Ralstonia eutropha, we functionally expressed the PHA synthase gene in various Escherichia coli mutants affected in fatty acid beta-oxidation and the wild-type. The PHA synthase gene was expressed either solely (pBHR70) or in addition to the R. eutropha genes encoding beta-ketothiolase and acetoacetyl-coenzyme A (CoA) reductase comprising the entire PHB operon (pBHR68) as well as in combination with the phaC1 gene (pBHR77) from Pseudomonas aeruginosa encoding type II PHA synthase. The fatty acid beta-oxidation route was employed to provide various 3-hydroxyacyl-CoA thioesters, depending on the carbon source, as in vivo substrate for the PHA synthase. In vivo PHA synthase activity was indicated by PHA accumulation and substrate specificity was revealed by analysis of the comonomer composition of the respective polyester. Only in recombinant E. coli fad mutants harboring plasmid pBHR68, the R. eutropha PHA synthase led to accumulation of poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) (poly(3HB-co-3HO)) and poly(3HB-co-3HO-co-3-hydroxydodecanoate (3HDD)), when octanoate and decanoate or dodecanoate were provided as carbon source, respectively. Coexpression of phaC1 from P. aeruginosa indicated and confirmed the provision of PHA precursor via the beta-oxidation pathway and led to the accumulation of a blend of two different PHAs in the respective E. coli strain. These data strongly suggested that R. eutropha PHA synthase accepts, besides the main substrate 3-hydroxybutyryl-CoA, also the CoA thioesters of 3HO and 3HDD.     

Synergistic effects of Glu130Asp substitution in the type II polyhydroxyalkanoate (PHA) synthase: enhancement of PHA production and alteration of polymer molecular weight

In vitro evolution of the polyhydroxyalkanoate (PHA) synthase gene from Pseudomonas sp. 61-3 (phaC1(Ps)) has been performed to generate highly active enzymes. In this study, a positive mutant of PHA synthase, Glu130Asp (E130D), was characterized in detail in vivo and in vitro. Recombinant Escherichia coli strain JM109 harboring the E130D mutant gene accumulated 10-fold higher (1.0 wt %) poly(3-hydroxybutyrate) [P(3HB)] from glucose, compared to recombinant E. coli harboring the wild-type PHA synthase gene (0.1 wt %). Recombinant E. coli strain LS5218 harboring the E130D PHA synthase gene grown on dodecanoate produced more poly(3HB-co-3-hydroxyalkanoate) [P(3HB-co-3HA)] (20 wt %) copolymer than an LS5218 strain harboring the wild-type PHA synthase gene (13 wt %). The E130D mutation also resulted in the production of copolymer with a slight increase in 3HB composition, compared to copolymer produced by the wild-type PHA synthase. In vitro enzyme activities of the E130D PHA synthase toward various 3-hydroxyacyl-CoAs (4-10 carbons in length) were all higher than those of the wild-type enzyme. The combination of the E130D mutation with other beneficial mutations, such as Ser325Thr and Gln481Lys, exhibited a synergistic effect on in vivo PHA production and in vitro enzyme activity. Interestingly, gel-permeation chromatography analysis revealed that the E130D mutation also had a synergistic effect on the molecular weight of polymers produced in vivo.     

Biosynthesis of polyhydroxyalkanoates (PHA) by recombinant Ralstonia eutropha and effects of PHA synthase activity on in vivo PHA biosynthesis.

Recombinant strains of Ralstonia eutropha PHB 4, which harbored Aeromonas caviae polyhydroxyalkanoates (PHA) biosynthesis genes under the control of a promoter for R. eutropha phb operon, were examined for PHA production from various alkanoic acids. The recombinants produced poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] from hexanoate and octanoate, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxypentano ate) [P(3HB-co-3HV-co-3HHp)] from pentanoate and nonanoate. One of the recombinant strains, R. eutropha PHB 4/pJRDBB39d3 harboring ORF1 and PHA synthase gene of A. caviae (phaC(Ac)) accumulated copolyesters with much more 3HHx or 3HHp fraction than the other recombinant strains. To investigate the relationship between PHA synthase activity and in vivo PHA biosynthesis in R. eutropha, the PHB- 4 strains harboring pJRDBB39d13 or pJRDEE32d13 were used, in which the heterologous expression of phaC(Ac) was controlled by promoters for R. eutropha phb operon and A. caviae pha operon, respectively. The PHA contents and PHA accumulation rates were similar between the two recombinant strains in spite of the quite different levels of PHA synthase activity, indicating that the polymerization step is not the rate-determining one in PHA biosynthesis by R. eutropha. The molecular weights of poly(3-hydroxybutyrate) produced by the recombinant strains were also independent of the levels of PHA synthase activity. It has been suggested that a chain-transfer agent is generated in R. eutopha cells to regulate the chain length of polymers.     

Metabolic engineering and characterization of phaC1 and phaC2 genes from Pseudomonas putida KCTC1639 for overproduction of medium-chain-length polyhydroxyalkanoate

Two PHA synthase phaC1 and phaC2 genes cloned from the new strain Pseudomonas putida KCTC1639 were metabolically engineered for the overproduction of medium-chain-length polyhydroxyalkanoate (mcl-PHA). The overexpressed phaC1 and phaC2 genes in P. putida KCTC1639 were compared in terms of the biosynthesis of mcl-PHA, fatty acid assimilation, distribution of 3-hydroxylacyl monomer units, granular morphology, and thermophysical properties of the accumulated mcl-PHA. The biosynthesis of mcl-PHA was enhanced only by the overexpressed phaC1 gene up to 2.86-fold, in contrast, the phaC2 gene did not activate the biosynthesis of mcl-PHA. The overexpressed phaC1 gene tended to form enlarged, high molecular weight, and lower crystalline mcl-PHA granules, whereas the amplified phaC2 gene induced the fragmentation of mcl-PHA into a few small-sized granules. The transformant P. putida KCTC1639 overexpressing the phaC1 gene encoding PHA synthase I was cultivated by pH-stat fed-batch cultivation, and the concentration and content of mcl-PHA increased up to 8.91 g L-1 and 70.5%, respectively.     

Application of the BPEC pathway for large-scale biotechnological production of poly(3-mercaptopropionate) by recombinant Escherichia coli, including a novel in situ isolation method

Metabolically engineered Escherichia coli JM109 harboring plasmid pBPP1 and expressing the nonnatural BPEC pathway for synthesis of thermoplastic polyhydroxyalkanoates (PHA) and novel polythioesters (PTE) to provide suitable substrates of PHA synthase was investigated with respect to biotechnological production of poly(3-mercaptopropionate) [poly(3MP)]. Fed-batch fermentation processes were established at the 30- and 500-liter scales in stirred tank bioreactors to produce kilogram amounts of poly(3MP). Cultivation was done in a modified M9 mineral salts medium containing glucose or glycerol as the carbon and energy source and with 3-mercaptopropionic acid (3MP) as the precursor substrate for poly(3MP) biosynthesis provided from the late exponential growth phase. Approximately 23 g of cell dry matter (CDM) per liter and poly(3MP) cell contents of up to 45% (wt/wt) were the highest cell densities and polymer contents obtained, respectively. At best, 69.1% (wt/wt) of 3MP was converted into poly(3MP), indicating that 3MP was mostly used for poly(3MP) biosynthesis. Furthermore, a novel in situ process for rapid and convenient isolation of poly(3MP) from the cells in the bioreactor was developed. This was achieved by addition of sodium dodecyl sulfate to the cultivation broth immediately after the fermentation, heating to 90 degrees C for 20 min with intensive stirring, and subsequent washing steps. The purity of such in situ isolated poly(3MP) was more than 98%, as revealed by gas chromatographic and elemental sulfur analyses of the material isolated.     

Engineering of polyhydroxyalkanoate (PHA) synthase PhaC2<Subscript>Ps</Subscript> of <Emphasis Type="Italic">Pseudomonas stutzeri</Emphasis> via site-specific mutation for efficient production of PHA copolymers

The site-specific mutagenesis for PHA synthase PhaC2_Ps1317 from Pseudomonas stutzeri 1317 was conducted for optimizing production of short-chain-length and medium-chain-length polyhydroxyalkanoates (scl-mcl PHA). Recombinant Ralstonia eutropha PHB-4 harboring double mutated phaC2 _Ps1317 gene (phaC2 _Ps QKST) produced 42 wt.% PHA content in the cell dry weight (CDW) with 93 mol% 3-hydroxybutyrate (HB) as monomer in the PHA copolymer. Compared to that of wild-type phaC2 _Ps1317 , the higher PHA content indicated the effectiveness of the specific point mutations for improvement on PhaC2_Ps1317 activity and PHA production. The physical characterization revealed that the PHA produced by the recombinant strain was scl-mcl PHA copolymers with molecular weights and polydispersity reasonable for practical applications. Recombinant R. eutropha PHB-4 containing mutated phaC2 _Ps1317 termed phaC2 _Ps QKST was demonstrated to be able to produce scl-mcl PHA copolymers consisting of even-numbered, odd-numbered, or a combination of even- and odd-numbered monomers covering the carbon chain lengths from C4 to C12 when related substrates were provided. Recombinant R. eutropha PHB-4 containing phaC2PsQKST could be used as a strain for production of copolymers consisting of dominated HB and medium-chain-length 3-hydroxyalkanoates (HA) with better application properties.     

Application of the BPEC Pathway for Large-Scale Biotechnological Production of Poly(3-Mercaptopropionate) by Recombinant Escherichia coli, Including a Novel In Situ Isolation Method

Metabolically engineered Escherichia coli JM109 harboring plasmid pBPP1 and expressing the nonnatural BPEC pathway for synthesis of thermoplastic polyhydroxyalkanoates (PHA) and novel polythioesters (PTE) to provide suitable substrates of PHA synthase was investigated with respect to biotechnological production of poly(3-mercaptopropionate) [poly(3MP)]. Fed-batch fermentation processes were established at the 30- and 500-liter scales in stirred tank bioreactors to produce kilogram amounts of poly(3MP). Cultivation was done in a modified M9 mineral salts medium containing glucose or glycerol as the carbon and energy source and with 3-mercaptopropionic acid (3MP) as the precursor substrate for poly(3MP) biosynthesis provided from the late exponential growth phase. Approximately 23 g of cell dry matter (CDM) per liter and poly(3MP) cell contents of up to 45% (wt/wt) were the highest cell densities and polymer contents obtained, respectively. At best, 69.1% (wt/wt) of 3MP was converted into poly(3MP), indicating that 3MP was mostly used for poly(3MP) biosynthesis. Furthermore, a novel in situ process for rapid and convenient isolation of poly(3MP) from the cells in the bioreactor was developed. This was achieved by addition of sodium dodecyl sulfate to the cultivation broth immediately after the fermentation, heating to 90°C for 20 min with intensive stirring, and subsequent washing steps. The purity of such in situ isolated poly(3MP) was more than 98%, as revealed by gas chromatographic and elemental sulfur analyses of the material isolated.     

Biosynthesis of polyhydroxyalkanoate homopolymers by Pseudomonas putida

Pseudomonas putida KT2442 has been a well-studied producer of medium-chain-length (mcl) polyhydroxyalkanoate (PHA) copolymers containing C6 ~ C14 monomer units. A mutant was constructed from P. putida KT2442 by deleting its phaG gene encoding R-3-hydroxyacyl-ACP-CoA transacylase and several other β-oxidation related genes including fadB, fadA, fadB2x, and fadAx. This mutant termed P. putida KTHH03 synthesized mcl homopolymers including poly(3-hydroxyhexanoate) (PHHx) and poly(3-hydroxyheptanoate) (PHHp), together with a near homopolymer poly(3-hydroxyoctanoate-co-2 mol% 3-hydroxyhexanoate) (PHO*) in presence of hexanoate, heptanoate, and octanoate, respectively. When deleted with its mcl PHA synthase genes phaC1 and phaC2, the recombinant mutant termed P. putida KTHH08 harboring pZWJ4-31 containing PHA synthesis operon phaPCJ from Aeromonas hydrophila 4AK4 accumulated homopolymer poly(3-hydroxyvalerate) (PHV) when valerate was used as carbon source. The phaC deleted recombinant mutant termed P. putida KTHH06 harboring pBHH01 holding PHA synthase PhbC from Ralstonia eutropha produced homopolymers poly(3-hydroxybutyrate) (PHB) and poly(4-hydroxybutyrate) using γ-butyrolactone was added as precursor. All the homopolymers were physically characterized. Their weight average molecular weights ranged from 1.8 × 10⁵ to 1.6 × 10⁶, their thermal stability changed with side chain lengths. The derivatives of P. putida KT2442 have been developed into a platform for production of various PHA homopolymers.     

Incremental truncation of PHA synthases results in altered product specificity

PHA synthase is the key enzyme involved in the biosynthesis of microbial polymers, polyhydroxyalkanoates (PHA). In this study, we created a hybrid library of PHA synthase gene with different crossover points by an incremental truncation method between the C-terminal fragments of the phaC(Cn) (phaC from Cupriavidus necator) and the N-terminal fragments of the phaC1(Pa) (phaC from Pseudomonas aeruginosa). As the truncation of the hybrid enzyme increased, the in vivo PHB synthesis ability of the hybrids declined gradually. PHA synthase PhaC(Cn) with a deletion on N-terminal up to 83 amino acid residues showed no synthase activity. While with the removal of up to 270 amino acids from the N-terminus, the activity of the truncated PhaC(Cn) could be complemented by the N-terminus of PhaC1(Pa). Three of the hybrid enzymes W188, W235 and W272 (named by the deleted nucleic acid number) were found to have altered product specificities.     

Molecular characterisation of phaCAB from Comamonas sp. EB172 for functional expression in Escherichia coli JM109

In this study, PHA biosynthesis operon of Comamonas sp. EB172, an acid-tolerant strain, consisting of three genes encoding acetyl-CoA acetyltransferase (phaA(Co) gene, 1182bp), acetoacetyl-CoA reductase (phaB(Co) gene, 738bp) and PHA synthase, class I (phaC(Co) gene, 1694bp) were identified. Sequence analysis of the phaA(Co), phaB(Co) and phaC(Co) genes revealed that they shared more than 85%, 89% and 69% identity, respectively, with orthologues from Delftia acidovorans SPH-1 and Acidovorax ebreus TPSY. The PHA biosynthesis genes (phaC(Co) and phaAB(Co)) were successfully cloned in a heterologous host, Escherichia coli JM109. E. coli JM109 transformants harbouring pGEM'-phaC(Co)AB(Re) and pGEM'-phaC(Re)AB(Co) were shown to be functionally active synthesising 33wt.% and 17wt.% of poly(3-hydroxybutyrate) [P(3HB)]. E. coli JM109 transformant harbouring the three genes from the acid-tolerant Comamonas sp. EB172 (phaCAB(Co)) under the control of native promoter from Cupriavidus necator, in vivo polymerised P(3HB) when fed with glucose and volatile mixed organic acids (acetic acid:propionic acid:n-butyric acid) in ration of 3:1:1, respectively. The E. coli JM109 transformant harbouring phaCAB(Co) could accumulate P(3HB) at 2g/L of propionic acid. P(3HB) contents of 40.9% and 43.6% were achieved by using 1% of glucose and mixed organic acids, respectively.     

阻断集胞藻6803 PHB合成途径提高胞内NADPH含量

蓝藻是探索利用太阳能生产化学品的重要微生物,但产量低限制了蓝藻化学品的工业应用。提高宿主还原力水平是提高微生物合成化学品产量的重要手段。为提高集胞藻细胞内NADPH含量,利用同源重组方法,获得敲除聚羟基丁酸酯PHB合酶编码基因phaC和phaE的集胞藻Synechocystis sp. PCC 6803突变体S.DphaC&E。PCR结果证明突变体S.DphaC&E基因组中phaC和phaE已完全被氯霉素抗性基因取代。生长曲线结果显示S.DphaC&E的生长与野生型无明显差异,说明敲除phaC和phaE对     

Cloning, characterization and comparison of the Pseudomonas mendocina polyhydroxyalkanoate synthases PhaC1 and PhaC2

This study describes a comparison of the polyhydroxyalkanoate (PHA) synthases PhaC1 and PhaC2 of Pseudomonas mendocina. The P mendocina pha gene locus, encoding two PHA synthase genes [phaC1Pm and phaC2pm flanking a PHA depolymerase gene (phaZ)], was cloned, and the nucleotide sequences of phaC1Pm (1,677 bp), phaZ (1,034 bp), and phaC2pm (1,680 bp) were determined. The amino acid sequences deduced from phaC1Pm and phaC2pm showed highest similarities to the corresponding PHA synthases from other pseudomonads sensu stricto. The two PHA synthase genes conferred PHA synthesis to the PHA-negative mutants P. putida GPp104 and Ralstonia eutropha PHB-4. In P. putida GPp 104, phaC1Pm and phaC2Pm mediated PHA synthesis of medium-chain-length hydroxyalkanoates (C6-C12) as often reported for other pseudomonads. In contrast, in R. eutropha PHB-4, either PHA synthase gene also led to the incorporation of 3-hydroxybutyrate (3HB) into PHA. Recombinant strains of R. eutropha PHB-4 harboring either P. mendocina phaC gene even accumulated a homopolyester of 3HB during cultivation with gluconate, with poly(3HB) amounting to more than 80% of the cell dry matter if phaC2 was expressed. Interestingly, recombinant cells harboring the phaC1 synthase gene accumulated higher amounts of PHA when cultivated with fatty acids as sole carbon source, whereas recombinant cells harboring PhaC2 synthase accumulated higher amounts when gluconate was used as carbon source in storage experiments in either host. Furthermore, isogenic phaC1 and phaC2 knock-out mutants of P. mendocina provided evidence that PhaC1 is the major enzyme for PHA synthesis in P. mendocina, whereas PhaC2 contributes to the accumulation of PHA in this bacterium to only a minor extent, and then only when cultivated on gluconate.     

Engineering of Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from fructose and solid-state properties of the copolymer

Recombinant Ralstonia eutropha capable of producing poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymer [P(3HB-co-3HHx)] from fructose was engineered by introduction of genes for crotonyl-CoA reductase (CCR) from Streptomyces cinnamonensis (ccrSc) and for PHA synthase and (R)-specific enoyl-CoA hydratase from Aeromonas caviae (phaC-JAc). In this recombinant strain, C6-acyl-CoA intermediates were provided via beta-ketothiolase-mediated elongation of butyryl-CoA, which was generated from crotonyl-CoA by the function of CCR. The recombinant strain could accumulate the copolyester up to 48 wt % of dry cell weight with 1.5 mol % of 3HHx fraction from fructose, when the expression of ccrSc under the control of the PBAD promoter was induced with 0.01% L-arabinose. The absence of L-arabinose or the deletion of ccrSc from the plasmid resulted in accumulation of poly(3-hydroxybutyrate) homopolymer, indicating the critical role of CCR in the formation of the 3-hydroxyhexanoate unit. Higher CCR activity obtained by the addition of a larger amount of L-arabinose did not affect the composition but reduced the intracellular content of the copolyester. The P(3HB-co-1.5 mol % 3HHx) copolyester produced from fructose by the recombinant R. eutropha showed relatively lower melting temperatures (150 degrees C and 161 degrees C) and lower crystallinity (48 +/- 5%) compared to those (175 degrees C and 60 +/- 5%) of P(3HB) homopolymer. It has been found that the incorporation of a small amount (1.5 mol %) of 3HHx units into P(3HB) sequences leads to a remarkable change in the solid-state properties of P(3HB) crystals. The present study demonstrates the potential of the engineered pathway for the production of copolyesters having favorable characteristics from inexpensive carbon resources.     

PHA production, from bacteria to plants.

The genes encoding the polyhydroxyalkanoate (PHA) biosynthetic pathway in Ralstonia eutropha (3-ketothiolase, phaA or bktB; acetoacetyl-CoA reductase, phaB; and PHA synthase, phaC) were engineered for plant plastid targeting and expressed using leaf (e35S) or seed-specific (7s or lesquerella hydroxylase) promoters in Arabidopsis and Brassica. PHA yields in homozygous transformants were 12-13% of the dry mass in homozygous Arabidopsis plants and approximately 7% of the seed weight in seeds from heterozygous canola plants. When a threonine deaminase was expressed in addition to bktB, phaB and phaC, a copolyester of 3-hydroxybutyrate and 3-hydroxyvalerate was produced in both Arabidopsis and Brassica.