In situ measurement of plant water potentials by equilibration with microdroplets of polyethylene glycol 8000

Microdroplets (3-5 nanoliters) of polyethylene glycol 8000 solution were allowed to equilibrate with plant water potential by placing the microdroplet on an abraded surface and covering it with mineral oil to prevent evaporation. Osmolality was followed by cryoscopic measurements, accurate to about ±0.1 bar, on subnanoliter samples.

Under constant environmental conditions, apparent equilibrium between microdroplet and plant water potentials was attained in about 1 to 2 hours. Microdroplet osmolality responded promptly to treatments (illumination, excision, osmotica) which changed plant water status. The values obtained for plant water potentials appeared to be physiologically reasonable. However, comparison with values obtained by other means (dewpoint hygrometry, treatment of tissue with polyethylene glycol solutions, calculation from turgor and osmotic pressures) suggest that they might be somewhat more negative than the actual tissue water potential.

Aside from the advantage of providing in situ measurements of plant water status, the method is not temperature sensitive and requires only about 10 square millimeters of surface area, which allows its use on even small structures with little interference by shading or with gas exchange.

     

Alpha-amylase assay with dyed-starch in polyethylene glycol and dextran solutions

Summary The -amylase assay method with RBB-starch was shown to work well in the presence of polyethylene glycol and dextran, polymers commonly used in aqueous two-phase systems. Neither the polymer type, polymer concentration, nor molecular weight affected the -amylase activity measurement. On the other hand, the same polymers significantly interfered with the Nelson copper method, the DNS method, and the iodine-starch method.     

The bundling of actin with polyethylene glycol 8000 in the presence and absence of gelsolin.

Actin filament and bundle formation occur in the cytosol under conditions of very high total macromolecular concentration. In this study we have utilized the inert molecule polyethylene glycol 8000 (PEG) as a means of simulating crowded conditions in vitro. Column-purified Ca-actin was polymerized in the absence and presence of gelsolin (to regulate mean filament lengths between 50 and 5000 mers) and PEG (2-8%) using various concentrations of KCl and/or 2 mM divalent cations. Bundling was characterized by the scattered light intensity and mean diffusion coefficients obtained from dynamic light scattering, as well as by fluorescence and phase-contrast microscopy. The minimum concentration of KCl required for bundling decreases both with increasing concentration of PEG at a fixed mean filament length, and with decreasing filament length at a fixed concentration of PEG. In the absence of divalent cation, bundling is reversible on dilution, as determined by intensity levels, diffusion coefficients, and microscopy. However, with either 2 mM Mg2+ or Ca2+ added, bundling is irreversible under conditions of higher PEG concentrations or longer filaments, indicating that osmotic pressure effects cannot fully explain actin bundling with PEG. Weaker divalent cation-binding sites on actin as well as disulfide bonds appear to be involved in the irreversible bundling.     

Clinical usefulness of TSAb assay with high polyethylene glycol concentrations.

We previously demonstrated the stimulatory effect of polyethylene glycol (PEG) on thyroid-stimulating antibody (TSAb)-IgG-stimulated cAMP production (thyroid stimulating (TS) index) in porcine thyroid cell (PTC) assay. In the present study the clinical usefulness of the practical method using high PEG concentrations was examined. TS activity using PEG 22.5% precipitated fraction (PF) was significantly higher compared to standard TSAb activity using 12.5% PF from TSAb-positive serum, but the maximum TS activity was observed with PEG 12.5% PF + 4% PEG or PEG 22.5% PF + 2% PEG. In all cases of untreated Graves' patients, TSAb activity determined by PEG 22.5% PF was higher compared to standard TSAb activity using PEG 12. 5% PF from test serum, but the highest TSAb activity was observed by PEG 12.5% PF + 4% PEG without increased cAMP production to normal serum. TSAb was positive in 85% (40/47), 98% (46/47) and 100% (47/47) of untreated Graves' patients by the method of PEG 12.5% PF, PEG 22.5% PF and PEG 12.5% + 4% PEG, respectively. Increased TSAb activity by PEG 12.5% PF + 4% PEG method was also observed even if the standard TSAb activity using PEG 12.5% PF method was negative in the euthyroid states of Graves' patients during antithyroid drug therapy. The stimulatory effect of PEG on TS activity was not found in other thyroidal diseases [thyroiditis chronica (with high serum TSH), thyroid stimulation-blocking antibody (TSBAb)-positive sera (with low serum TSH), adenomatous goiter, subacute thyroiditis, and thyroid cancer]. The stimulatory effect of 5% PEG on TS activity produced directly by small amounts of Graves' serum (50 microl) was also found, although the sensitivity was lower than with PEG-precipitated IgG from 0.2 ml serum. The clinical usefulness of the sensitive TSAb assay using PEG-precipitated IgG or direct serum assay in the presence of high PEG concentrations was demonstrated.     

Protein refolding is improved by adding nonionic polyethylene glycol monooleyl ethers with various polyethylene glycol lengths

Protein refolding from bacterial inclusion bodies is a crucial step for the production of recombinant proteins, but the refolding step often results in significantly lower yields due to aggregation. To prevent aggregation, chemical additives are often used. However, the ability of additives to effectively increase refolding yields are protein dependent, and therefore, it is important to understand the manner in which the substructures of additives confer suitable properties on protein refolding. We focused attention on nonionic detergents, the polyethylene glycol monooleyl ether (PGME) series, and systematically studied the influence of two to 90 polyethylene glycol (PEG) lengths of PGMEs on the refolding of pig muscle lactate dehydrogenase (LDH), hen egg white lysozyme, and yeast α‐glucosidase. PGMEs with longer PEG lengths such as PGME20, 50, and 90 suppressed aggregation, and increased refolding yields. Notably, PGME20 increased the LDH yield to 56.7% from 2.5% without additives. According to the refolding kinetic analysis of LDH, compared with PGME50 and 90, the refolding rate constant in PGME20 solutions remained relatively high at a broad range of concentrations because of its weaker steric hindrance of intramolecular interactions involved in folding, leading to a preference for refolding over aggregation. These findings should provide basic guidelines to identify appropriate PEG‐based nonionic detergents for protein refolding.     

Alterations in phospholipid polymorphism by polyethylene glycol

Summary The fusogen polyethylene glycol is shown to alter the polymorphism of dimyristoyl phosphatidylcholine, soybean phosphatidylethanolamine, bovine phosphatidylserine, egg phosphatidylcholine/cholesterol mixture, dilinoleoylphosphatidylethanolamine/palmitoyl-oleoylphosphatidylcholine mixture, and egg lysolecithin. Suspension of these lipids in 50% polyethylene glycol (mol wt=6000) reduces both the lamellar and the hexagonal II repeat spacings as measured by X-ray diffraction. An increase in the gel to liquid crystalline and bilayer to hexagonal transition temperatures are observed by freeze-fracture, X-ray diffraction, differential scanning calorimetry and³¹P NMR. Freeze-fracture electron micrographs revealed different bilayer defects depending on the physical states of the lipid. Lipidic particles in mixtures containing unsaturated phosphatidylethanolamine is eliminated. Some of the influences of polyethylene glycol on lipids may be explained by its dehydrating effect. However, other nonfusogenic dehydrating agents failed to produce similar results. These findings are consistent with the proposal that close bilayer contact and the formation of bilayer defects are associated with the fusogenic properties of polyethylene glycol.     

Ester-exchange catalyzed by lipase modified with polyethylene glycol

Lipoprotein lipase was modified with 2,4-bis(O-methoxypolyethylene glycol)-6-chloro-s-triazine; forty-six percent out of seven amino groups in the molecule were substituted. The modified lipase catalyzed ester-exchange reactions between an ester and an alcohol, between an ester and an acid, and between two esters. The modified enzyme catalyzed these reactions not only in organic solvents, but also in straight hydrophobic substrates. As the modified enzyme was extremely stable at elevated temperature, for example at 70 degrees C, this can find many practical applications.     

Immobilization of nitrifying bacteria by polyethylene glycol prepolymer

The effects of immobilizing materials on the activity of nitrifying bacteria were investigated by using 11 kinds of prepolymers of polyethylene glycol. Relative respiratory activity of immobilized nitrifying bacteria with polyethylene glycol metacrylate prepolymer was higher than that of polyethylene glycol acrylate prepolymer, and there was a tendency for relative respiratory activity to be higher with a prepolymer of greater molecular weight. With the polyethylene glycol prepolymer, there was a drastic improvement over the conventional method of immobilization by acrylamide in the relative respiratory activity of the pellet. Inorganic synthetic wastewater was treated under a high loading rate of 1.14 kg-N/m³·d. Influent NH₄-N could be removed to 2 mg/l or less and the nitrogen removal was 90%.     

Enhancement of enzymatic production of cyclodextrins by adding polyethylene glycol or polypropylene glycol

Enzymatic production of cyclodextrins (CDs) from soluble starch was studied using either Bacillus macerans or Bacillus ohbensis cyclomaltodextrin glucanotransferase (CGTase). The production yield of CDs was found to be increased up to 1.5–2 times by the addition of low molecular weight polyethylene glycol (PEG 400) or polypropylene glycol (PPG 425) to the reaction medium. Such results were interpreted as being due to a conformational change of the substrate as well as reduction of hydrolytic activity of the enzyme in the presence of these additives.     

Evaluation of the water potentials of solutions of polyethylene glycol 8000 both in the absence and presence of other solutes

Published and additional data for polyethylene glycol 8000 (PEG), formerly PEG 6000, solution water potentials (Ψ) are compared. Actual bars Ψ over the concentration range of 0 to 0.8 gram PEG per gram H₂O and temperature (T) range of 5 to 40°C are best predicted (probably within ± 5%) by this equation: Ψ = 1.29[PEG]²T − 140[PEG]² − 4.0[PEG]. Although transformable through division by [PEG] to virial equation form, results indicate that the coefficients are not virial. Mannitol (MAN) interacts with PEG to produce Ψ significantly lower than additive. Vapor pressure osmometer (VPO) data for MAN-PEG synergism compared favorably with those from thermocouple hygrometry; and VPO data showing the interactions between PEG and four salts are presented. The synergism of MAN-PEG and of NaCl-PEG are related linearly to the concentration of solute added with PEG.     

Inducible or constitutive polyethylene glycol dehydrogenase involved in the aerobic metabolism of polyethylene glycol

2, 6-Dichlorophenolindophenol (DCIP)-dependent polyethylene glycol (PEG) dehydrogenase activity was found in the particulate fractions of cell-free extracts prepared from PEG-utilizing bacteria (Pseudomonas and Flavobacterium species). This result suggested that PEG dehydrogenase is linked to the respiratory chain of each bacterium and that the enzyme plays a major role in the aerobic metabolism of PEG. Enzyme activities were strongly inhibited by 1, 4-benzoquinone. No metal ion was indispensable for the enzyme activities. Enzyme activities of PEG-utilizing bacteria were induced by PEG except for the activity of PEG 4000-utilizing Flavobacterium sp. no. 203 which had a constitutive enzyme. Although PEG-utilizing bacteria had different growth substrate specificities toward PEGs 200–20,000, their PEG dehydrogenases oxidized the same molecular wt. range of PEGs (dimer-20,000). Cell-free extracts of PEG 400-, 1000- or 4000-utilizing bacteria oxidized PEG 6000 and 20,000 though these bigger PEGs could not be utilized as the sole carbon and energy sources by the bacteria. Methanol, ethylene glycol and glycerol were not or only barely dehydrogenated by all the enzyme preparations.     

Radioprotective effect of polyethylene glycol

Polyethylene glycol of molecular weight 400 (PEG-400) had a radioprotective effect of about 20% against lethality when given ip 20 min prior to single or fractionated X-ray doses to the head and neck. Dose modification factors (DMF) based on LD50/15 values ranged from 1.14 to 1.24. A similar DMF of 1.12 based on LD50/30 values was obtained using single doses of whole-body X irradiation. Mice given head and neck irradiation had significantly reduced rectal temperatures (31.3 +/- 3.0 degrees C) 9 days post irradiation compared with unirradiated controls (35.4 +/- 0.6 degrees C). No such reduction was observed when PEG-400 was given with radiation (36.3 +/- 0.9 degrees C). PEG-400 also lessened, but not significantly, the frequency of shivering in irradiated animals. Histopathologic examination of the oral structures demonstrated only marginal protection by PEG-400. Estimation of the alpha/beta ratio from LD50 data on head and neck-irradiated mice yielded values of 4.4 +/- 1.9 (95% confidence limits) Gy without PEG-400 and 7.9 +/- 1.4 Gy with PEG-400. Since it is a non-thiol radioprotector, PEG-400 may be more useful when combined with more conventional thiol-containing radioprotectors.     

Phosphorus contamination in polyethylene glycol

Concentrations of Fe, Mn, Cu, Zn, Ca, Mg, K, and P were examined in untreated and ion exchange resin-treated solutions of polyethylene glycol, molecular weight 3000 to 3700, polyethylene glycol (PEG 4000). Relatively high levels of P were found in untreated PEF-4000 solutions. The concentration of contaminating P in solutions prepared from untreated PEG 4000, even at high water potentials (−1 to −3 bars), was greater than what is usually found in soil solution. Occurrence of significant amounts of P in untreated PEG could introduce problems in experiments where ³²P and PEG are used together and where phosphate interactions may occur.     

A phase-transfer glucosamination of phenols catalyzed by polyethylene glycol

Glycosylation of phenols with alpha-D-glucosaminyl chloride peracetate catalyzed by polyethylene glycol (PEG) was carried out in a solid-liquid phase transfer system at room temperature. The results were compared with those previously obtained for the catalysis with various crown ethers. The catalytic activity of PEG in this reaction was found to be comparable with those of 15-crown-5 and aromatic crown ethers. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2005, vol. 31, no. 3; see also http://www.maik.ru.     

Acceleration of nucleic acid hybridization rate by polyethylene glycol

The addition of polyethylene glycol to filter-bound nucleic acid hybridization greatly increases the hybridization rate. With single-stranded probes, the increase obtained with polyethylene glycol is significantly greater than that obtained with dextran sulfate. Additionally, polyethylene glycol is easier to manipulate and less expensive than dextran sulfate.