Position-specific incorporation of biotinylated non-natural amino acids into a protein in a cell-free translation system

Biotinylation is useful for the detection, purification and immobilization of proteins. It is performed by chemical modification, although position-specific and quantitative biotinylation is rarely achieved. We developed a position-specific biotinylation method using biotinylated non-natural amino acids. We showed that biotinylated p-aminophenylalanine derivatives were incorporated into a protein more efficiently than biotinylated lysine derivatives in a cell-free translation system. In addition, the biotinylated p-aminophenylalanines overcame the serious position-dependency observed for biotinylated lysines. The present method will be useful for detection and purification of proteins along with comprehensive exploration of surface-exposed residues and oriented immobilization of proteins.     

The acetylatable lysines of human Fen1 are important for endo- and exonuclease activities

Human Fen1 can be acetylated in vivo and in vitro resulting in reduced endonuclease and exonuclease activities in vitro. Acetylation occurs at four lysines located at the C terminus of Fen1, which is important for DNA binding. In this paper we show that Fen1 mutant proteins lacking the lysines at the C terminus have both reduced PCNA independent exonucleolytic and endonucleolytic activities. However, lysines at the C terminus are not required for PCNA stimulation of human Fen1. A double flap substrate was optimal for human Fen1 endonuclease and did not require the C-terminal lysines. Similarly, a one nucleotide 3'-overhang nick substrate was optimal for human Fen1 exonuclease and also did not require the C-terminal lysines. Finally, we found by an electromobility shift assay that human Fen1 had a different mode of binding with a double flap substrate containing a one nucleotide 3'-tail when compared to various other flap substrates. Taken together, our results confirm the double flap substrate as the likely in vivo intermediate for human Fen1 and that the C-terminal lysines are important for the endonuclease and exonuclease activities likely through DNA binding.     

Versatile method for production and controlled polymer-immobilization of biologically active recombinant proteins

The immobilization of a protein by covalent attachment to a support matrix should involve only functional groups of the protein that are not essential for its biological activity. A general strategy for obtaining recombinant proteins designed for oriented covalent grafting onto copolymers was investigated. The rationale involves the definition of seven p24-derived recombinant proteins as fused to either distant or adjacent tags comprising primary amine rich tag consisting of six contiguous lysines suitable for oriented covalent immobilization and a hexa-histidine tag suitable for metal chelate affinity purification. High-level expression, efficient affinity purification, and coupling yields onto maleic anhydride-alt-methyl vinyl ether copolymers higher than 95% were obtained for all proteins. Afterwards, an investigation of the biological features of the immobilized vs. nonimmobilized protein onto the copolymer allowed us to select one bioconjugate which was used in a diagnostic context, i.e., as a capture antigen in an ELISA format test. Sera from 107 HIV-seropositive individuals at various stages of HIV infection, including two seroconversion panels and 104 healthy HIV-seronegative controls, were tested using either RH24 or RK24H-copolymer coated onto the microtiter plate. These assays showed that the use of such a protein-copolymer bioconjugate allowed detection of lower antibody titers than the RH24 protein, illustrating the potential of applications of such doubly tagged proteins. Thus, a set of expression vectors was designed containing four different combinations of hexa-lysine and hexa-histidine tags and a multiple cloning site, allowing the production of different recombinant fusion proteins suitable for biological reactivity conservation after immobilization.     

Controlled antibody immobilization onto immunoanalytical platforms by synthetic peptide

Antibody immobilization on a solid surface is inevitable in the preparation of immunochips/sensors. Antibody-binding proteins such as proteins A and G have been extensively employed to capture antibodies on sensor surfaces with right orientations, maintaining their full functionality. Because of their synthetic versatility and stability, in general, small molecules have more advantages than proteins. Nevertheless, no small molecule has been used for oriented and specific antibody immobilization. Here is described a novel strategy to immobilize an antibody on various sensor surfaces by using a small antibody-binding peptide. The peptide binds specifically to the Fc domain of immunoglobulin G (IgG) and, therefore, affords a properly oriented antibody surface. Surface plasmon resonance analysis indicated that a peptide linked to a gold chip surface through a hydrophilic linker efficiently captured human and rabbit IgGs. Moreover, antibodies captured by the peptide exhibited higher antigen binding capacity compared with randomly immobilized antibodies. Peptide-mediated antibody immobilization was successfully applied on the surfaces of biosensor substrates such as magnetic particles and glass slides. The antibody-binding peptide conjugate introduced in this work is the first small molecule linker that offers a highly stable and specific surface platform for antibody immobilization in immunoassays.     

Oriented immobilization of biologically active proteins as a tool for revealing protein interactions and function

The advantages of oriented immobilization of biologically active proteins are good steric accessibilities of active binding sites and increased stability. This not only may help to increase the production of preparative procedures but is likely to promote current knowledge about how the living cells or tissues operate. Protein inactivation starts with the unfolding of the protein molecule by the contact of water with hydrophobic clusters located on the surface of protein molecules, which results in ice-like water structure. Reduction of the nonpolar surface area by the formation of a suitable biospecifc complex or by use of carbohydrate moieties thus may stabilize proteins. This review discusses oriented immobilization of antibodies by use of immobilized protein A or G. The section about oriented immobilization of proteins by use of their suitable antibodies covers immobilization of enzymes utilizing their adsorption on suitable immunosorbents prepared using monoclonal or polyclonal antibodies, preparation of bioaffinity adsorbent for the isolation of concanavalin A and immobilization of antibodies by use of antimouse immunoglobulin G, Fc-specific (i.e. specific towards the constant region of the molecule). In the further section immobilization of antibodies and enzymes through their carbohydrate moieties is described. Oriented immobilization of proteins can be also based on the use of boronate affinity gel or immobilized metal ion affinity chromatography technique. Biotin–avidin or streptavidin techniques are mostly used methods for oriented immobilization. Site-specific attachment of proteins to the surface of solid supports can be also achieved by enzyme, e.g., subtilisin, after introduction a single cysteine residue by site-directed mutagenesis.     

Protein monoubiquitination and polyubiquitination generate structural diversity to control distinct biological processes

Ubiquitination involves the attachment of ubiquitin (Ub) to lysine residues on substrate proteins or itself, which can result in protein monoubiquitination or polyubiquitination. Polyubiquitination through different lysines (seven) or the N-terminus of Ub can generate different protein-Ub structures. These include monoubiquitinated proteins, polyubiqutinated proteins with homotypic chains through a particular lysine on Ub or mixed polyubiquitin chains generated by polymerization through different Ub lysines. The ability of the ubiquitination pathway to generate different protein-Ub structures provides versatility of this pathway to target proteins to different fates. Protein ubiquitination is catalyzed by Ub-conjugating and Ub-ligase enzymes, with different combinations of these enzymes specifying the type of Ub modification on protein substrates. How Ub-conjugating and Ub-ligase enzymes generate this structural diversity is not clearly understood. In the current review, we discuss mechanisms utilized by the Ub-conjugating and Ub-ligase enzymes to generate structural diversity during protein ubiquitination, with a focus on recent mechanistic insights into protein monoubiquitination and polyubiquitination.     

Affibody protein capture microarrays: synthesis and evaluation of random and directed immobilization of affibody molecules

Affibody molecules, 58-amino acid three-helix bundle proteins directed to different targets by combinatorial engineering of staphylococcal protein A, were used as capture ligands on protein microarrays. An evaluation of slide types and immobilization strategies was performed to find suitable conditions for microarray production. Two affibody molecules, Z(Taq) and Z(IgA), binding Taq DNA polymerase and human IgA, respectively, were synthesized by solid phase peptide synthesis using an orthogonal protection scheme, allowing incorporation of selective immobilization handles. The resulting affibody variants were used for random surface immobilization (through amino groups) or oriented surface immobilization (through cysteine or biotin coupled to the side chain of Lys58). Evaluation of the immobilization techniques was carried out using both a real-time surface plasmon resonance biosensor system and a microarray system using fluorescent detection of Cy3-labeled target protein. The results from the biosensor analyses showed that directed immobilization strategies significantly improved the specific binding activity of affibody molecules. However, in the microarray system, random immobilization onto carboxymethyl dextran slides and oriented immobilization onto thiol dextran slides resulted in equally good signal intensities, whereas biotin-mediated immobilization onto streptavidin-coated slides produced slides with lower signal intensities and higher background staining. For the best slides, the limit of detection was 3 pM for IgA and 30 pM for Taq DNA polymerase.     

Conjugation of complex polyubiquitin chains to WRNIP1

Werner helicase interacting protein 1 (WRNIP1) is a ubiquitin-binding protein that undergoes extensive post-translational modification including ubiquitination, sumoylation, and phosphorylation. These post-translational modifications are expected to regulate the function of WRNIP1 in the DNA damage response. In this study, we use a denaturing tandem affinity purification technique along with mass spectrometry to show that, unlike most ubiquitin-binding proteins, WRNIP1 is polyubiquitinated. WRNIP1 polyubiquitination is reminiscent of the well-characterized phenomenon of the coupled monoubiquitination of ubiquitin-binding proteins in that this polyubiquitination is dependent on the presence of an intact ubiquitin-binding domain. The polyubiquitin chains conjugated to WRNIP1 are linked through lysines 11, 48, and 63. This study presents the first evidence for the conjugation of K11-K48-K63 polyubiquitin chains to a specific substrate in vivo. Polyubiquitination is likely to regulate WRNIP1's function in the DNA damage response, as UV radiation induces the hyperubiquitination of WRNIP1. Polyubiquitination with noncanonical intraubiquitin linkages may represent a unique mode of regulation of UBZ domain-containing proteins.     

Traceless and Site-specific Attachment of Proteins onto Solid Supports

Many experimental approaches in biology and biophysics, as well as applications in diagnosis and drug discovery, require proteins to be immobilized on solid supports. Protein microarrays, for example, provide a high-throughput format to study biomolecular interactions. The technique employed for protein immobilization is a key to the success of these applications. Recent biochemical developments are allowing, for the first time, the selective and traceless immobilization of proteins generated by cell-free systems without the need for purification and/or reconcentration prior to the immobilization step.     

Methods of chemical immobilization of an enzyme on a solid support]

Carbonic anhydrase was immobilized on a polymer thermoplastic to promote gaseous CO2 hydration into bicarbonate ions. Catalyst immobilization was realized through a series of chemical reactions enabling enzyme covalent binding to polyamide support. Different initial enzyme concentrations of 0.25, 0.50, 0.75, 1, and 2 mg/ml were verified. Different techniques were developed to assess enzyme attachment. The amount of bound protein was determined using Bradford dosage of proteins remaining in solution following CA II incubation with solid support. ELISA has given a qualitative evaluation of the protein, enabling a follow up of enzyme binding robustness as a function of time. p-nitrophenyl acetate hydrolysis and CO2 hydration were assessed by spectrophotometry and electrometry, respectively. The percentage of active enzyme following immobilization was measured using an esterase linear model. Catalytic transformation rates for gaseous CO2 hydration were calculated for each type of immobilization.     

A bifunctional monolithic column for combined protein preconcentration and digestion for high throughput proteomics research

Enzymatic digestion of proteins is a key step in protein identification by mass spectrometry (MS). Traditional solution-based protein digestion methods require long incubation times and are limitations for high throughput proteomics research. Recently, solid phase digestion (e.g. trypsin immobilization on solid supports) has become a useful strategy to accelerate the speed of protein digestion and eliminate autodigestion by immobilizing and isolating the enzyme moieties on solid supports. Monolithic media is an attractive support for immobilization of enzymes due to its unique properties that include fast mass transfer, stability in most solvents, and versatility of functional groups on the surfaces of monoliths. We prepared immobilized trypsin monolithic capillaries for on-column protein digestion, analyzed the digested peptides through LC/FTICR tandem MS, and compared peptide mass fingerprinting by MALDI-TOF-MS. To further improve the digestion efficiency for low abundance proteins, we introduced C4 functional groups onto the monolith surfaces to combine on-column protein enrichment and digestion. Compared with immobilized trypsin monolithic capillaries without C4, the immobilized trypsin-C4 monolith showed improved digestion efficiency. A mechanism for increased efficiency from the combination of sample enrichment and on-column digestion is also proposed in this paper. Moreover, we investigated the effects of organic solvent on digestion and detection by comparing the observed digested peptide sequences. Our data demonstrated that all columns showed good tolerance to organic solvents and maintained reproducible enzymatic activity for at least 30 days.     

蛋白质多聚SUMO化修饰及其功能

泛素（ubiquitin, Ub）是一类高度保守的小蛋白, 可与靶蛋白的赖氨酸残基共价连接, 形成多聚泛素链行使功能. 类似于泛素化修饰过程, 小泛素相关修饰物(small ubiquitin related modifier, SUMO）也可以共价修饰靶蛋白的赖氨酸残基, 从而影响靶蛋白的定位、稳定性以及蛋白间的相互作用, 发挥重要的生理功能. 尽管在多数情况下, 靶蛋白发生的是单SUMO化修饰, 但最近研究发现,SUMO依赖自身的赖氨酸也可以形成多聚链. 与单SUMO化修饰不同的是, 多聚SUMO化修饰的靶蛋白可以进一步被泛素化修饰, 进而诱导靶蛋白的降解. 这是一种新的、特殊的化学修饰形式, 弄清它的生理功能,对于了解细胞的生长、分化以及凋亡等生理过程将具有重要的意义. 本文将就此方面的最新研究进展做一综述.     

Immobilization of histidine-tagged proteins on gold surfaces using chelator thioalkanes

The reversible, oriented immobilization of proteins on solid surfaces is a prerequisite for the investigation of molecular interactions and the controlled formation of supramolecular assemblies. This paper describes a generally applicable method using a synthetic chelator thioalkane that can be self-assembled on gold surfaces. The reversible binding of an anti-lysozyme F(ab) fragment modified with a C-terminal hexahistidine extension was monitored and the apparent dissociation constants determined using surface plasmon resonance. Infra-red spectroscopy demonstrated that the secondary structure of the protein was unaffected by the immobilization process. The retention of functionality of the immobilized protein was also successfully demonstrated. Given the mild reaction conditions and reversibility, this method of oriented immobilization of proteins opens possibilities for the development of biosensors.     

Functional glass surface displaying a glutamyl donor substrate for transglutaminase-mediated protein immobilization

A chemically modified glass surface displaying a glutamyl donor substrate peptide (Z-QG) was developed for microbial transglutaminase (MTG)-mediated immobilization of recombinant proteins tagged with an MTG-reactive lysine-containing substrate peptide (K-tag). To evaluate the surface modification conditions affecting the enzymatic protein immobilization, we employed an amino-modified 96-well glass plate as a base and prepared three types of glass surfaces displaying Z-QG. Validation of the Z-QG modified glass surfaces with recombinant enhanced green fluorescent proteins revealed that the insertion of a di(ethylene glycol) linker between the terminal Z-QG moiety and the base not only enhances enzymatic protein immobilization efficiency but also decreases nonselective protein adsorption. A bacterial alkaline phosphatase fused with a K-tag at the N terminus was also successfully immobilized to the designed glass surface, suggesting that the chemically modified glass surface displaying a spatially controlled glutamyl donor substrate is a potential platform for MTG-mediated fabrication of protein-based solid biomaterials.     

Enhancing the functional properties of thermophilic enzymes by chemical modification and immobilization

The immobilization of proteins (mostly typically enzymes) onto solid supports is mature technology and has been used successfully to enhance biocatalytic processes in a wide range of industrial applications. However, continued developments in immobilization technology have led to more sophisticated and specialized applications of the process. A combination of targeted chemistries, for both the support and the protein, sometimes in combination with additional chemical and/or genetic engineering, has led to the development of methods for the modification of protein functional properties, for enhancing protein stability and for the recovery of specific proteins from complex mixtures. In particular, the development of effective methods for immobilizing large multi-subunit proteins with multiple covalent linkages (multi-point immobilization) has been effective in stabilizing proteins where subunit dissociation is the initial step in enzyme inactivation. In some instances, multiple benefits are achievable in a single process.Here we comprehensively review the literature pertaining to immobilization and chemical modification of different enzyme classes from thermophiles, with emphasis on the chemistries involved and their implications for modification of the enzyme functional properties. We also highlight the potential for synergies in the combined use of immobilization and other chemical modifications.     

Entropic stabilization of proteins and its proteomic consequences

Evolutionary traces of thermophilic adaptation are manifest, on the whole-genome level, in compositional biases toward certain types of amino acids. However, it is sometimes difficult to discern their causes without a clear understanding of underlying physical mechanisms of thermal stabilization of proteins. For example, it is well-known that hyperthermophiles feature a greater proportion of charged residues, but, surprisingly, the excess of positively charged residues is almost entirely due to lysines but not arginines in the majority of hyperthermophilic genomes. All-atom simulations show that lysines have a much greater number of accessible rotamers than arginines of similar degree of burial in folded states of proteins. This finding suggests that lysines would preferentially entropically stabilize the native state. Indeed, we show in computational experiments that arginine-to-lysine amino acid substitutions result in noticeable stabilization of proteins. We then hypothesize that if evolution uses this physical mechanism as a complement to electrostatic stabilization in its strategies of thermophilic adaptation, then hyperthermostable organisms would have much greater content of lysines in their proteomes than comparably sized and similarly charged arginines. Consistent with that, high-throughput comparative analysis of complete proteomes shows extremely strong bias toward arginine-to-lysine replacement in hyperthermophilic organisms and overall much greater content of lysines than arginines in hyperthermophiles. This finding cannot be explained by genomic GC compositional biases or by the universal trend of amino acid gain and loss in protein evolution. We discovered here a novel entropic mechanism of protein thermostability due to residual dynamics of rotamer isomerization in native state and demonstrated its immediate proteomic implications. Our study provides an example of how analysis of a fundamental physical mechanism of thermostability helps to resolve a puzzle in comparative genomics as to why amino acid compositions of hyperthermophilic proteomes are significantly biased toward lysines but not similarly charged arginines.     

Context of multiubiquitin chain attachment influences the rate of Sic1 degradation

The ubiquitin-dependent targeting of proteins to the proteasome is an essential mechanism for regulating eukaryotic protein stability. Here we define the minimal signal for the degradation of the S phase CDK inhibitor Sic1. Of 20 lysines scattered throughout Sic1, 6 N-terminal lysines serve as major ubiquitination sites. Sic1 lacking these lysines (K0N) is stable in vivo, but readdition of any one restores turnover. Nevertheless, ubiquitin chains attached at different N-terminal lysines specify degradation in vitro at markedly different rates. Moreover, although K0N can be ubiquitinated by SCF(Cdc4)/Cdc34 in vitro in the absence (but not in the presence) of S-CDK, it is degraded slowly. Our results reveal that a single multiubiquitin chain can sustain a physiological turnover rate, but that chain position plays an unexpectedly significant role in the rate of proteasomal proteolysis.     

Chemical thiolation strategy: A determining factor in the properties of thiol-bound biocatalysts

Immobilization of enzymes on thiolsulphinate-agarose, a thiol-reactive support, is a unique method which allows reversible covalent immobilization under mild conditions, so excellent immobilization and activity yields are obtained. It allows both the formation of stable bonds as well as enzyme desorption and matrix regeneration. The impact of the source of the enzyme's thiol group involved in the immobilization (native, reduced disulphide or chemically introduced) on the properties of the resulting biocatalysts was studied using three β-galactosidases from Escherichia coli, Kluyveromices lactis and Aspergillus oryzae as a model. Chemical thiolation, which generates changes at surface exposed lysines, produced derivatives similar to their soluble counterparts. However, the reduction of native disulphide bonds prior to immobilization lead to very variable activity and stability of the derivatives depending on the accessibility and location of the disulphide bonds in the enzyme structure.     

Site-directed immobilization of glycoproteins on hydrazide-containing solid supports

Methods are described for the preparation and use of solid supports containing hydrazide functions for the immobilization of glycoproteins specifically through the oligosaccharide moieties. The solid supports are prepared from commercial "active ester" agarose by reaction with hydrazine hydrate. Glycoproteins are oxidized with sodium periodate, resulting in the production of aldehydes on the oligosaccharide moieties. Oxidized glycoprotein is then reacted with the hydrazide-derivatized solid support to produce stable hydrazone linkages. Data are presented for the optimization of binding of oxidized glycoprotein to hydrazide-derivatized agarose. Agarose hydrazide/glycoprotein gels were shown to be stable from pH 3 to 10 and activity studies using immobilized avidin show that this method of immobilization results in an increased "specific activity" of bound protein when compared with standard methods of immobilization.