Analysis of the subcellular location of pullulanase produced by Escherichia coli carrying the pulA gene from Klebsiella pneumoniae strain UNF5023

Three different techniques, protease accessibility, cell fractionation and in situ immunocytochemistry, were used to study the location of the lipoprotein pullulanase produced by Escherichia coli K12 carrying the cloned pullulanase structural gene (pulA) from Klebsiella pneumoniae, with or without the K. pneumoniae genes required to transport pullulanase to the cell surface (secretion-competent and secretion-incompetent, respectively). Pullulanase produced by secretion-competent strains could be slowly but quantitatively released into the medium by growing the cells in medium containing pronase. The released pullulanase lacked the N-terminal fatty-acylated cysteine residue (and probably also a short N-terminal segment of the pullulanase polypeptide), confirming that the N-terminus is the sole membrane anchor in the protein. Pullulanase produced by secretion-incompetent strains was not affected by proteases, confirming that it is not exposed on the cell surface. Pullulanase cofractionated with both outer and inner membrane vesicles upon isopycnic sucrose gradient centrifugation, irrespective of the secretion competence of the strain. Examination by electronmicroscopy of vesicles labelled with antipullulanase serum and protein A-gold confirmed that pullulanase was associated with both types of vesicles. When thin-sectioned cells were examined by the same technique, pullulanase was found to be located mainly on the cell surface of the secretion-competent cells and mainly in the proximity of the inner membrane in the secretion-incompetent cells. Thus, while the results from three independent techniques (substrate accessibility, protease accessibility and in situ immunocytochemistry) show that pullulanase is transported to the cell surface of secretion-competent cells, this could not be confirmed by cell-fractionation techniques. Possible explanations for this discrepancy are discussed.     

Cloning and expression in Escherichia coli of the Klebsiella pneumoniae genes for production, surface localization and secretion of the lipoprotein pullulanase.

This article describes the reconstitution in Escherichia coli of a heterologous protein secretion system comprising a gene for an extracellular protein together with its cognate secretion genes. The protein concerned, pullulanase, is a secreted lipoprotein of the Gram-negative bacterium Klebsiella pneumoniae. It is initially localized to the cell surface before being specifically released into the medium. E. coli carrying the cloned pullulanase structural gene (pulA) produces pullulanase but does not expose or secrete it. Secretion genes were cloned together with pulA in an 18.8 kbp fragment of K. pneumoniae chromosomal DNA. E. coli carrying this fragment exhibited maltose-inducible production, exposition and specific secretion of pullulanase. Transposon mutagenesis showed that the secretion genes are located on both sides of pulA. Secretion genes located 5' to pulA were transcribed in the opposite orientation to pulA under the control of the previously identified, malT-regulated malX promoter. Thus these secretion genes are part of the maltose regulon and are therefore co-expressed with pulA. Transposon mutagenesis suggested that secretion genes located 3' of pulA are not co-transcribed with pulA, raising the possibility that some secretion functions are not maltose regulated.     

Stable periplasmic secretion intermediate in the general secretory pathway of Escherichia coli.

The secretion of the Klebsiella oxytoca cell surface lipoprotein pullulanase involves translocation across the cytoplasmic and outer membranes of the Gram-negative bacterial cell envelope. A variant of pullulanase was created by fusing the signal peptide-encoding 5' region of the Escherichia coli gene for periplasmic MalE protein to the 3' end of the pulA gene encoding almost the entire mature part of pullulanase. When produced in E. coli carrying the malE-pulA gene fusion on a high copy number plasmid and the complete set of genes specifically required for pullulanase secretion on a second plasmid, the hybrid protein differed from wild-type pullulanase as follows: (i) it was not fatty-acylated; (ii) it was apparently processed by LepB signal peptidase rather than by LspA lipoprotein signal peptidase; (iii) it was released into the periplasm and was only slowly transported across the outer membrane, and (iv) it was released directly into the medium rather than via the usual surface-anchored intermediate. The hybrid protein was secreted more rapidly when malE-pulA was expressed from a low copy number plasmid. The two steps in the secretion pathway could be totally uncoupled by expressing first the malE-pulA gene fusion and then the cognate secretion genes. These results show that fatty-acylation of wild-type PulA is not essential for secretion but may improve its efficiency when large amounts of the protein are produced, that the two steps in secretion can occur quite independently and that the periplasmic intermediate can persist for long periods under certain circumstances.     

Export and secretion of the lipoprotein Pullulanase by Klebsiella pneumoniae

Pullulanase, a secreted lipoprotein of Klebsiella pneumoniae, is initially localized to the outer face of the outer membrane, as shown by protease and substrate accessibility and by immunofluorescence tests. Freeze-thaw disruption of these cells released both membrane-associated and apparently soluble forms of Pullulanase. Membrane-associated Pullulanase co-fractionated with authentic outer membrane vesicles upon isopycnic sucrose-gradient centrifugation, whereas the quasi-soluble form had the same equilibrium density as inner membrane vesicles and extracellular Pullulanase aggregates. The latter also contained outer membrane maltoporin, but were largely devoid of other membrane components including LPS and lipids. K. pneumoniae carrying multiple copies of the Pullulanase structural gene (pulA) produced increased amounts of cell-associated and secreted Pullulanase, but a large proportion of the enzyme was neither exposed on the cell surface nor released into the medium, even after prolonged incubation. This suggests that factors necessary for Pullulanase secretion were saturated by the over-produced Pullulanase. When pulA was expressed under lacZ promoter control, the Pullulanase which was produced was not exposed on the cell surface at any time, suggesting that Pullulanase secretion genes are not expressed constitutively, and raising the possibility that they, like puM, may be part of the maltose regulon.     

A gene fusion approach to the study of pullulanase export and secretion in Eschenchia coli

A series of fusions between the gene for the Klebsiella pneumoniae secreted lipoprotein pullulanase (pulA) and the genes for cytoplasmic beta-galactosidase (lacZ) or periplasmic alkaline phosphatase (phoA) were created by transposon mutagenesis using mini-MudII1681 or TnphoA, respectively. The hybrid genes were expressed in Escherichia coli K-12 with or without the K. pneumoniae genes that promote pullulanase secretion in E. coli. We characterized seven different pulA-lacZ gene fusions encoding hybrid polypeptides containing from 14 to c. 1060 residues of pro-pullulanase. All but the smallest hybrid were fatty acylated and were toxic to producing cells, causing the accumulation of precursors of other exported proteins. Four different pulA-phoA gene fusions encoded hybrids with alkaline phosphatase activity. All four hybrids were fatty acylated, but were not toxic. Although the hybrids were apparently membrane-associated, they were not secreted into the medium either by E. coli carrying pullulanase secretion genes or by K. pneumoniae. Immunofluorescence tests indicated that the pullulanase secretion genes promoted the localization of one of these hybrids to the outer face of the E. coli outer membrane, which may have important implications for the design of live vaccine strains and of immobilized enzymes.     

Characterization and expression of the structural gene for pullulanase, a maltose-inducible secreted protein of Klebsiella pneumoniae.

Some strains of Klebsiella pneumonia secrete pullulanase, a debranching enzyme which produces linear molecules (maltodextrins, amylose) from amylopectin and glycogen. pulA, the structural gene for pullulanase, was introduced into Escherichia coli, either on a multiple-copy-number plasmid or as a single copy in the chromosome. When in E. coli, pulA was controlled by malT, the positive regulatory gene of the maltose regulon. Indeed, pulA expression was undetectable in a malT-negative mutant and constitutive in a malTc strain. Furthermore, the plasmid carrying pulA titrated the MalT protein. When produced in E. coli, pullulanase was not localized in the same way as in K. pneumoniae. In the latter case it was first exported to the outer membrane, with which it remained loosely associated, and was then released into the growth medium. In E. coli the enzyme was distributed both in the inner and the outer membranes and was never released into the growth medium.     

Klebsiella pneumoniae pulS gene encodes an outer membrane lipoprotein required for pullulanase secretion.

The product of the Klebsiella pneumoniae gene pulS, which is located downstream from the pullulanase structural gene (pulA), is essential for the cell surface localization and extracellular release of pullulanase in Escherichia coli K-12. pulS is transcribed in the opposite direction to pulA, from which it is separated by a region of 624 nucleotides. Although this latter region contains a new component of the maltose regulon, pulB, which is transcribed from the pulA promoter, it is not required for pullulanase synthesis or secretion. Unlike pulA and all other pullulanase secretion genes characterized so far, the expression of pulS is not induced by growth in the presence of maltose and is unaffected by mutations in the maltose regulator gene malT. The pulS gene product was identified as a ca. 12-kilodalton outer membrane lipoprotein. The characterization of PulS brings to three the number of identified proteins which are known to be required for pullulanase secretion in addition to the components of the signal sequence-dependent general protein export pathway.     

Molecular characterization of pulA and its product, pullulanase, a secreted enzyme of Klebsielia pneumoniae UNF5023

The determined nucleotide sequence of the Klebsiella pneumoniae UNF5023 gene pulA comprises a single open reading frame coding for a 1090-residue precursor of the secreted protein pullulanase. The predicted sequence of this protein is highly homologous to that of pullulanase of Klebsiella aerogenes strain W70. However, the UNF5023 pullulanase lacks a collagen-like sequence present at the N-terminus of the mature W70 enzyme and differs further from the W70 pullulanase around residue 300 and at the C-terminus. Pullulanases with or without the collagen-like sequence could not be separated by gel electrophoresis under denaturing or non-denaturing conditions, and were unaffected by collagenase. A large central domain which is highly conserved in both UNF5023 and W70 polypeptides contains eight short sequences that are also found in amylases and iso-amylases. Linker mutations in the region of the UNF5023 pulA gene coding for this domain abolished catalytic activity without affecting transport of the polypeptide across the outer membrane. Hybrid proteins comprising at least the amino-terminal 656 residues of prepullulanase fused to alkaline phosphatase were partially localized to the cell surface, as judged by their accessibility to anti-pullulanase serum in immuno-fluorescence tests. On the basis of these results, we tentatively propose that secretion signals required for recognition and translocation across the outer membrane via the pullulanase-specific extension of the secretion pathway are located near the N-terminus of the pullulanase polypeptide.     

Secretion of the cell surface lipoprotein pullulanase in Escherichia coli. Cooperation or competition between the specific secretion pathway and the lipoprotein sorting pathway.

The fatty acid-acylated enzyme pullulanase is normally found in either of two locations in Escherichia coli, depending on whether or not the producing strains also express the genes specifically required for the second step in pullulanase secretion. When they are expressed, the enzyme is localized to the cell surface, while in their absence, it is directed to an unidentified location in the cell envelope which, upon lysis, forms vesicles whose density is intermediate between those of outer and cytoplasmic membrane vesicles. In order to test the role of the putative lipoprotein sorting signal, Asp2, in pullulanase sorting and secretion, the structural gene (pulA) was subjected to site-directed mutagenesis. Replacement of the Asp2 residue by Asn, Glu, or Ser caused the enzyme to fractionate with outer membrane-derived vesicles rather than with intermediate density vesicles from E. coli cells devoid of pullulanase secretion genes. A pronounced secretion defect was observed in a two-step secretion assay in which the first (sec gene-dependent) and second (pul gene-dependent) secretion steps were uncoupled. We propose that the Asp residue increases the efficiency of pullulanase secretion by allowing the enzyme to be initially sorted to a region of the cell envelope wherein most of the pullulase-specific secretion factors are located.     

The normally periplasmic enzyme β-lactamase is specifically and efficiently translocated through the Escherichia coli outer membrane when it is fused to the cell-surface enzyme pullulanase

Hybrid proteins were constructed in which C-terminal regions of the bacterial cell surface and extracellular protein pullulanase were replaced by the mature forms of the normally periplasmic Escherichia coli proteins beta-lactamase or alkaline phosphatase. In E. coli strains expressing all pullulanase secretion genes, pullulanase-beta-lactamase hybrid protein molecules containing an N-terminal 834-amino-acid pullulanase segment were efficiently and completely transported to the cell surface. This hybrid protein remained temporarily anchored to the cell surface, presumably via fatty acids attached to the N-terminal cysteine of the pullulanase segment, and was subsequently specifically released into the medium in a manner indistinguishable from that of pullulanase itself. These results suggest that the C-terminal extremity of pullulanase lacks signal(s) required for export to the cell surface. When beta-lactamase was replaced by alkaline phosphatase, the resulting hybrid also became exposed at the cell surface, but exposition was less efficient and specific release into the medium was not observed. We conclude that proteins that do not normally cross the outer membrane can be induced to do so when fused to a permissive site near the C-terminus of pullulanase.     

Extracellular pullulanase of Klebsiella pneumoniae is a lipoprotein.

Pullulanase is a starch-debranching enzyme produced by the gram-negative bacterium Klebsiella pneumoniae. In this organism, the enzyme is first exported to the outer membrane and is subsequently released into the growth medium. Evidence reported here indicates that pullulanase is a lipoprotein. It is apparently synthesized as a precursor with a 19-residue-long signal sequence and modified by the covalent attachment of palmitate to the cysteine residue which becomes the amino terminus after cleavage of the signal sequence. In this respect, pullulanase is similar to some penicillinases produced by gram-positive bacteria which are initially exported to the cell surface and subsequently released into the medium. However, pullulanase and the penicillinases differ in one important aspect, namely, that the extracellular pullulanase still carries the covalently attached fatty acyls, whereas extracellular penicillinases lack the modified amino-terminal cysteine together with a limited number of other residues from the amino terminus.     

Extracellular secretion of pullulanase is unaffected by minor sequence changes but is usually prevented by adding reporter proteins to its N- or C-terminal end.

Linker insertions in the pullulanase structural gene (pulA) were examined for their effects on pullulanase activity and cell surface localization in Escherichia coli carrying the cognate secretion genes from Klebsiella oxytoca. Of the 23 insertions, 11 abolished pullulanase activity but none were found to prevent secretion. To see whether more drastic changes affected secretion, we fused up to five reporter proteins (E. coli periplasmic alkaline phosphatase, E. coli periplasmic maltose-binding protein, periplasmic TEM beta-lactamase, Erwinia chrysanthemi extracellular endoglucanase Z, and Bacillus subtilis extracellular levansucrase) to three different positions in the pullulanase polypeptide: close to the N terminus of the mature protein, at the C terminus of the protein, or at the C terminus of a truncated pullulanase variant lacking the last 256 amino acids. Only 3 of the 13 different hybrids were efficiently secreted: 2 in which beta-lactamase was fused to the C terminus of full-length or truncated pullulanase and 1 in which maltose-binding protein was fused close to the N terminus of pullulanase. Affinity-purified endoglucanase-pullulanase and pullulanase-endoglucanase hybrids exhibited apparently normal levels of pullulanase activity, indicating that the conformation of the pullulanase segment of the hybrid had not been dramatically altered by the presence of the reporter. However, pullulanase-endoglucanase hybrids were secreted efficiently if the endoglucanase component comprised only the 60-amino-acid, C-terminal cellulose-binding domain, suggesting that at least one factor limiting hybrid protein secretion might be the size of the reporter.     

Bacterial surface association of heat-labile enterotoxin through lipopolysaccharide after secretion via the general secretory pathway

Heat-labile enterotoxin (LT) is an important virulence factor expressed by enterotoxigenic Escherichia coli. The route of LT secretion through the outer membrane and the cellular and extracellular localization of secreted LT were examined. Using a fluorescently labeled receptor, LT was found to be specifically secreted onto the surface of wild type enterotoxigenic Escherichia coli. The main terminal branch of the general secretory pathway (GSP) was necessary and sufficient to localize LT to the bacterial surface in a K-12 strain. LT is a heteromeric toxin, and we determined that its cell surface localization was mediated by the its B subunit independent of an intact G(M1) ganglioside binding site and that LT binds lipopolysaccharide and G(M1) concurrently. The majority of LT secreted into the culture supernatant by the GSP in E. coli associated with vesicles. Only a mutation in hns, not overexpression of the GSP or LT, caused an increase in vesicle yield, supporting a specific vesicle formation machinery regulated by the nucleoid-associated protein HNS. We propose a model in which LT is secreted by the GSP across the outer membrane, secreted LT binds lipopolysaccharide via a G(M1)-independent binding region on its B subunit, and LT on the surface of released outer membrane vesicles interacts with host cell receptors, leading to intoxication. These data explain a novel mechanism of vesicle-mediated receptor-dependent delivery of a bacterial toxin into a host cell.     

Streptococcus pneumoniae proteins released into medium upon inhibition of cell wall biosynthesis

Inhibition of murein biosynthesis in Streptococcus pneumoniae by either penicillin or bacitracin leads to an increase in the amount of protein secreted into the medium. This process was studied in wild-type cells grown under lysis-permissive conditions as well as in an autolysin-deficient mutant. The time course of secretion did not follow cellular lysis but commenced immediately after the addition of the cell wall inhibitor in a manner similar to that described recently for cell wall and membrane components in various tolerant streptococci. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that this increase was not due to the stimulation of release of three protein components which are secreted under normal growth conditions; rather, a complex set of cellular proteins escaped from the antibiotic-treated pneumococci. The proteins released during bacitracin treatment was slightly different from those observed when penicillin was used. Analysis on sucrose gradients indicated that the secreted proteins were membrane bound rather than soluble. Membrane vesicles could indeed be detected by electron microscopy of negative-stained secreted material.     

Collagen-like sequences stabilize homotrimers of a bacterial hydrolase.

Pullulanase from Klebsiella pneumoniae strain FG9 has an unusual N-terminal amino acid sequence that includes six repeats of the tripeptide Gly-X-Pro. This type of sequence is characteristic of animal collagens and collagen-like proteins which form triple helical structures. We have investigated the molecular organization of this bacterial pullulanase isolated from the cell surface of Escherichia coli cells that carry the cloned FG9 pulA (pullulanase encoding) gene. Non-denaturing polyacrylamide gel analysis shows that pullulanase exists as higher order, apparently homogeneous, structures. We have used highly purified bacterial collagenase to probe the role of the collagen-like region and we demonstrate that this feature is essential for non-covalent association of pullulanase homotrimers. In addition we show collagenase-specific release of cell-bound pullulanase.     

Hydrolase secretion is a consequence of membrane recycling

Acanthamoeba releases lysosomal hydrolases continuously into the culture medium. This release is specific for lysosomal hydrolases, but not other cellular proteins, and is energy dependent. The secreted hydrolases can be separated into two groups on the basis of their secretion kinetics: one is secreted at approximately 15% of the cellular activity per hour and the other at approximately 5%. Intracellularly the lysosomal hydrolases are restricted almost exclusively to secondary lysosomes where the hydrolases demonstrate a differential pH-dependent binding to membrane. Hydrolase secretion is not the result of secondary lysosomes' fusing with the plasma membrane since soluble and particulate lysosomal contents are not released at the same rate. Together the data suggest that the secreted hydrolases are trapped in shuttle vesicles that cycle membrane from secondary lysosomes to the cell surface. The inner membrane and content of these vesicles undergo a marked pH shift when, following fragmentation from lysosomes, these vesicles fuse with plasma membrane. This rapid pH shift and the differential pH-dependent membrane binding of hydrolases appear to account for the heterogeneous hydrolase secretion kinetics.     

Molecular cloning and biochemical characterization of a heat-stable type I pullulanase from Thermotoga neapolitana

The gene encoding a type I pullulanase from the hyperthermophilic anaerobic bacterium Thermotoga neapolitana (pulA) was cloned in Escherichia coli and sequenced. The pulA gene from T. neapolitana showed 91.5% pairwise amino acid identity with pulA from Thermotoga maritima and contained the four regions conserved in all amylolytic enzymes. pulA encodes a protein of 843 amino acids with a 19-residue signal peptide. The pulA gene was subcloned and overexpressed in E. coli under the control of the T7 promoter. The purified recombinant enzyme (rPulA) produced a 93-kDa protein with pullulanase activity. rPulA was optimally active at pH 5-7 and 80°C and had a half-life of 88 min at 80°C. rPulA hydrolyzed pullulan, producing maltotriose, and hydrolytic activities were also detected with amylopectin, starch, and glycogen, but not with amylose. This substrate specificity is typical of a type I pullulanase. Thin layer chromatography of the reaction products in the reaction with pullulan and aesculin showed that the enzyme had transglycosylation activity. Analysis of the transfer product using NMR and isoamylase treatment revealed it to be α-maltotriosyl-(1,6)-aesculin, suggesting that the enzyme transferred the maltotriosyl residue of pullulan to aesculin by forming α-1,6-glucosidic linkages. Our findings suggest that the pullulanase from T. neapolitana is the first thermostable type I pullulanase which has α-1,6-transferring activity.     

Evidence that a globular conformation is not compatible with FhaC-mediated secretion of the Bordetella pertussis filamentous haemagglutinin

The 220 kDa Bordetella pertussis filamentous haemagglutinin (FHA) is the major extracellular protein of this organism. It is exported using a signal peptide-dependent pathway, and its secretion depends on one specific outer membrane accessory protein, FhaC. In this work, we have investigated the influence of conformation on the FhaC-mediated secretion of FHA using an 80 kDa N-terminal FHA derivative, Fha44. In contrast to many signal peptide-dependent secretory proteins, no soluble periplasmic intermediate of Fha44 could be isolated. In addition, cell-associated Fha44 synthesized in the absence of FhaC did not remain competent for extracellular secretion upon delayed expression of FhaC, indicating that the translocation steps across the cytoplasmic and the outer membrane might be coupled. A chimeric protein, in which the globular B subunit of the cholera toxin, CtxB, was fused at the C-terminus of Fha44, was not secreted in B. pertussis or in Escherichia coli expressing FhaC. The hybrid protein was only secreted when both disulphide bond-forming cysteines of CtxB were replaced by serines or when it was produced in DsbA^?E. coli. The Fha44 portion of the secretion-incompetent hybrid protein was partly exposed on the cell surface. These results argue that the Fha44–CtxB hybrid protein transited through the periplasmic space, where disulphide bond formation is specifically catalysed, and that secretion across the outer membrane was initiated. The folded CtxB portion prevented extracellular release of the hybrid, in contrast to the more flexible CtxB domain devoid of cysteines. We propose a secretion model whereby Fha44 transits through the periplasmic space on its way to the cell surface and initiates its translocation through the outer membrane before being released from the cytoplasmic membrane. Coupling of Fha44 translocation across both membranes would delay the acquisition of its folded structure until the protein emerges from the outer membrane. Such a model would be consistent with the extensive intracellular proteolysis of FHA derivatives in B. pertussis.