Electrochemical DNA hybridization detection using peptide nucleic acids and [Ru(NH3)6]3+ on gold electrodes

An electrochemical DNA hybridization detection method based on the electrostatic interactions of [Ru(NH3)6]3+ cations with the anionic phosphate backbone of DNA is proposed. PNA molecules are immobilized as capture probes on the gold substrate. The cationic ruthenium complexes do not interact electrostatically with the PNA probes due to the absence of the anionic phosphate groups on the PNA probes. But after hybridization, [Ru(NH3)6]3+ is adsorbed on the DNA backbone, giving a clear hybridization detection signal in ac voltammetry. The analytical parameters (sensitivity, selectivity and reproducibility) are evaluated. Very good discrimination against the single-base mismatch A2143G, internal to the 23S rRNA gene of Helicobacter pylori, is observed. Moreover the system is successfully applied to the detection of complementary PCR amplicons.     

Synthesis and hybridization properties of DNA-PNA chimeras carrying 5-bromouracil and 5-methylcytosine

The preparation of 5-bromouracil and 5-methylcytosine peptide nucleic acid (PNA) monomers is described. These PNA monomers were used for the preparation of several DNA-PNA chimeras and their hybridization properties are described. The substitution of cytosine by 5-methylcytosine in DNA-PNA chimeras increased duplex stability while substitution of thymine by 5-bromouracil maintained it. Moreover, binding of DNA-PNA chimeras to double-stranded DNA to form triple helices was studied. In contrast to DNA, the presence of 5-methylcytosine and 5-bromouracil in DNA-PNA chimeras destabilized triple helix.     

Detection of hybrid formation between peptide nucleic acids and DNA by fluorescence polarization in the presence of polylysine.

A new method for the detection of PNA/DNA hybrids is presented. In this method, short PNA probes (9-13 mer) are labeled with a fluorescent dye and allowed to hybridize to target DNA molecules. A cationic polyamino acid, such as polylysine, is then added to the reaction mixture, whereupon the DNA molecules bind electrostatically to this polycation. The PNA probes, which are uncharged or may carry only a small charge due to the fluorescent dye, do not bind to polylysine unless hybridized to the negatively charged DNA target. The binding of the labeled PNA/DNA hybrid to the high-molecular-weight polymer leads to a significant change in the rotational correlation time of the fluorophore attached to the PNA. This can be conveniently detected by measuring the fluorescence polarization of the latter. The method is completely homogeneous because no separation of free from bound PNA probe is required. The hybridization and dehybridization reactions can be followed in real time. The method has been applied to the typing of single-nucleotide polymorphisms in PCR products.     

Optimization of label-free DNA detection with electrochemical impedance spectroscopy using PNA probes

DNA biosensors, especially those based upon detection of the intrinsic negative charge of target DNA, can be greatly improved by the use of uncharged peptide nucleic acid (PNA) probes. Hybridization causes an increased electrostatic barrier for the negatively charged ferri/ferrocyanide redox couple, resulting in an increase in charge transfer resistance R(ct) that is measured using electrochemical impedance spectroscopy. We report on the optimization of PNA probe surface density by the simultaneous co-immobilization of thiol-modified probes and mercaptohexanol, with the PNA surface density controlled by the thiol mole ratio in solution. Maximum R(ct) change upon hybridization is obtained with 10% PNA mole fraction. The effect of the measurement buffer ionic strength is investigated. The electrostatic barrier for charge transfer to the ferri/ferrocyanide redox couple is approximately independent of ionic strength with PNA probes, but greatly increases with decreasing ionic strength, after hybridization with target DNA. This significantly enhances the R(ct) change upon hybridization. The optimization of PNA surface density and measurement buffer ionic strength leads to a 385-fold increase in R(ct) upon hybridization, a factor of 100 larger than previously reported results using either PNA or DNA probes.     

Conjugated polyelectrolytes for label-free DNA microarrays

Classical strategies for gene microarrays require labeling of probes or target nucleic acids with signaling molecules, a process that is expensive, time consuming and not always reliable. Bazan and colleagues showed that a nucleic acid-binding cationic conjugated polyelectrolyte can be used in label-free DNA microarrays based on surfaces modified with neutral peptide nucleic acid (PNA) probes. This technique provides a simple and sensitive method for DNA detection without the need for covalent labeling of target DNA.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

Affinity capture and recovery of DNA at femtomolar concentrations with peptide nucleic acid probes

The efficacy of PNA vs DNA oligomers for the recovery of femtomolar concentrations of 16S rDNA targets was determined with solution- and mixed-phase hybridization formats and limiting dilution quantitative PCR. Several results contradict existing perceptions of expected PNA behavior deduced from hybridization studies with oligonucleotide targets at high concentration. For example, DNA probes in the solution hybridization format performed as well as or better than PNA probes under high- or low-salt conditions, regardless of hybridization time or target size. In the mixed-phase hybridization format, however, PNA probes showed certain advantages, with more rapid and efficient binding/recovery of target nucleic acids regardless of target size. Recovery of target DNA with PNA probes was always more efficient in low-salt (20 mM in Na(+)) than high-salt (400 mM in Na(+-)) phosphate buffer. Recovery of target DNA by PNA probes was enhanced in the presence of excess, nontarget DNA, and differences in PNA efficacy under low- or high-salt conditions vanquished. In contrast, DNA probe performance was unaffected by the presence or absence of exogenous DNA in both solution- and mixed-phase hybridization formats. The absolute recovery and detection limit of the affinity purification method with either DNA or PNA probes was approximately 10(2) input target molecules at zeptamolar concentrations.     

FIT probes: peptide nucleic acid probes with a fluorescent base surrogate enable real-time DNA quantification and single nucleotide polymorphism discovery

The ability to accurately quantify specific nucleic acid molecules in complex biomolecule solutions in real time is important in diagnostic and basic research. Here we describe a DNA-PNA (peptide nucleic acid) hybridization assay that allows sensitive quantification of specific nucleic acids in solution and concomitant detection of select single base mutations in resulting DNA-PNA duplexes. The technique employs so-called FIT (forced intercalation) probes in which one base is replaced by a thiazole orange (TO) dye molecule. If a DNA molecule that is complementary to the FIT-PNA molecule (except at the site of the dye) hybridizes to the probe, the TO dye exhibits intense fluorescence because stacking in the duplexes enforces a coplanar arrangement even in the excited state. However, a base mismatch at either position immediately adjacent to the TO dye dramatically decreases fluorescence, presumably because the TO dye has room to undergo torsional motions that lead to rapid depletion of the excited state. Of note, we found that the use of d-ornithine rather than aminoethylglycine as the PNA backbone increases the intensity of fluorescence emitted by matched probe-target duplexes while specificity of fluorescence signaling under nonstringent conditions is also increased. The usefulness of the ornithine-containing FIT probes was demonstrated in the real-time PCR analysis providing a linear measurement range over at least seven orders of magnitude. The analysis of two important single nucleotide polymorphisms (SNPs) in the CFTR gene confirmed the ability of FIT probes to facilitate unambiguous SNP calls for genomic DNA by quantitative PCR.     

New cyanine dyes as base surrogates in PNA: forced intercalation probes (FIT-probes) for homogeneous SNP detection

Forced intercalation probes (FIT-probes) are nucleic acid probes, in which an intercalator cyanine dye such as thiazole orange (TO) serves as a replacement of a canonical nucleobase. These probes signal hybridization by showing strong increases of fluorescence. TO in FIT-probes responds to adjacent base mismatches by attenuation of fluorescence intensities at conditions where both matched and mismatched target DNA are bound. The interesting features of TO labeled FIT-probes posed the question whether the forced intercalation concept can be extended to other cyanine dyes of the thiazole orange family. Herein, we present the synthesis of three asymmetrical cyanine dyes and their incorporation into PNA-conjugates by means of both divergent and linear solid-phase synthesis. Melting analysis revealed that the DNA affinity of PNA probes remained high irrespective of the replacement of a nucleobase by the cyanines YO (oxazole yellow), MO or JO. Of the three new tested dye-PNA-conjugates, the YO-containing PNA has properties useful for homogeneous SNP detection. YO-PNA is demonstrated to signal the presence of fully complementary DNA by up to 20-fold enhancement of fluorescence. In addition, YO emission discriminates against single base mismatches by attenuation of fluorescence. Oxazole yellow (YO) as a base surrogate in PNA may prove useful in the multiplex detection of single base mutations at non-stringent conditions.     

Femtomol SPR detection of DNA-PNA hybridization with the assistance of DNA-guided polyaniline deposition

The inability of surface plasmon resonance (SPR) spectroscopy to detect extremely small refractive index changes has hindered its applications in ultrasensitive DNA analysis. In this study we report a signal amplification strategy that uses DNA-templated polyaniline deposition, suitable for DNA hybridization analysis with charge neutral peptide nucleic acid (PNA) being probes. Under acidic conditions, protonated aniline monomers are adsorbed on DNA backbones through electrostatic interaction. The microenvironment provided by the DNA facilitates oxidative aniline polymerization initialized by H₂O₂ in the presence of horseradish peroxide. Under optimal conditions, the detection limit is lowered from 5 nM for conventional SPR detection to 0.1 pM. The significant sensitivity improvement is attributed to the in-situ polymer chain growth along DNA strands, which introduces drastic refractive index increases. This signal amplification approach does not involve secondary hybridization processes. The detection sensitivity obtained is much better than that of gold nanoparticle-based amplification involving a secondary hybridization process and labeled DNA detection probes.     

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).     

Electrospray ionisation-cleavable tandem nucleic acid mass tag–peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag–peptide nucleic acid (TNT–PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Development of a PNA probe for the detection of the toxic dinoflagellate Takayama pulchella

A peptide nucleic acid (PNA) probe was developed to detect the toxic dinoflagellate, Takayama pulchella TPXM, using fluorescent in situ hybridization (FISH) combined with epifluorescent microscopy and flow cytometry. The PNA probe was then used to analyze HAB samples from Xiamen Bay. The results indicated that the fluorescein phosphoramidite (FAM)-labeled probe (PNATP28S01) [Flu]-OO ATG CCA TCT CAA GA, entered the algal cells easily and bound to the target species specifically. High hybridization efficiency (nearly 100%) was observed. Detection by epifluorescence microscopy and flow cytometry gave comparable results. The fluorescence intensity of the PNA probe hybridized to T. pulchella cells was remarkably higher than that of two DNA probes used in this study and than the autofluorescence of the blank and negative control cells. In addition, the hybridization condition of the PNA probe was easier to control than DNA probes, and when applied to field-collected samples, the PNA probe showed higher binding efficiency to the target species than DNA probes. With the observed high specificity, binding efficiency, and detection signal intensity, the PNA probe will be useful for monitoring harmful algal blooms of T. pulchella.     

Application of cationic conjugated polymers in microarrays using label-free DNA targets

A fluorescence-based microarray technique that does not require target DNA labeling is detailed. This 'label-free' approach utilizes a cationic, water-soluble conjugated polymer PFBT (poly[9,9'-bis(6'-(N,N,N-trimethylammonium)hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole) dibromide]), and neutral PNA (peptide nucleic acid) hybridization probes. DNA hybridization to immobilized PNA spots results in a change in the net charge at that particular surface. Electrostatic interactions between the cationic polymer and negatively charged DNA bind the polymer to the hybrid DNA/PNA complex. By exciting the conjugated polymer at 488 nm on a commercial microarray scanner, the presence of the target is directly indicated by the fluorescence emission of the polymer. This feature eliminates the necessity of target labeling required in traditional microarray protocols. There are five steps involved in the procedure before scanning or imaging the array: (i) slide hydration, (ii) target hybridization, (iii) post-hybridization washing, (iv) polymer application and (v) polymer washing. Each step takes 20 min to 1 h. The overall protocol requires approximately 2-3 h.     

Nonradioactive labeling with chemically modified cytosine tails by the polymerase chain reaction.

We developed a modified nonradioactive method for the detection of DNA. This method makes use of the polymerase chain reaction for preparation of probes; that is, a DNA fragment inserted in the polylinker region of an M13 or pUC vector is amplified with primers that have a modified cytosine tail at the 5' terminus (C-tailed primers). By this method, large amounts of labeled probes can be obtained easily. After hybridization, modified cytosine tails can be detected immunologically. DNA labeled by this method could be used in plaque hybridization. We could detect 0.05 pg of dot-blotted labeled DNA in 30 min with an enzyme-catalyzed chemiluminescence reaction.     

Improved fluorescent in situ hybridization method for detection of bacteria from activated sludge and river water by using DNA molecular beacons and flow cytometry

Fluorescent in situ hybridization (FISH) remains a key technique in microbial ecology. Molecular beacons (MBs) are self-reporting probes that have potential advantages over linear probes for FISH. MB-FISH strategies have been described using both DNA-based and peptide nucleic acid (PNA)-based approaches. Although recent reports have suggested that PNA MBs are superior, DNA MBs have some advantages, most notably cost. The data presented here demonstrate that DNA MBs are suitable for at least some FISH applications in complex samples, providing superior discriminatory power compared to that of corresponding linear DNA-FISH probes. The use of DNA MBs for flow cytometric detection of Pseudomonas putida resulted in approximately double the signal-to-noise ratio of standard linear DNA probes when using laboratory-grown cultures and yielded improved discrimination of target cells in spiked environmental samples, without a need for separate washing steps. DNA MBs were also effective for the detection and cell sorting of both spiked and indigenous P. putida from activated sludge and river water samples. The use of DNA MB-FISH presents another increase in sensitivity, allowing the detection of bacteria in environmental samples without the expense of PNA MBs or multilaser flow cytometry.     

Microarray gene expression analysis free of reverse transcription and dye labeling

A new microarray system has been developed for gene expression analysis using cationic gold nanoparticles with diameters of 250 nm as a target detection reagent. The approach utilizes nonlabeled target molecules hybridizing with complementary probes on the array, followed by incubation in a colloidal gold solution. The hybridization signal results from the precipitation of nanogold particles on the hybridized spots due to the electrostatic attraction of the cationic gold particles and the anionic phosphate groups in the target DNA backbone. In contrast to conventional fluorescent detection, this nanoparticle-based detection system eliminates the target labeling procedure. The visualization of hybridization signals can be accomplished with a flatbed scanner instead of a confocal laser scanner, which greatly simplifies the process and reduces the cost. The sensitivity is estimated to be less than 2 pg of DNA molecules captured on the array surface. The signal from hybridized spots quantitatively represents the amount of captured target DNA and therefore permits quantitative gene expression analysis. Cross-array reproducibility is adequate for detecting twofold or less signal changes across two microarray experiments.     

Conjugates of PNA with naphthalene diimide derivatives having a broad range of DNA affinities

Peptide nucleic acids (PNAs) are neutral DNA analogues, which bind single-stranded DNA (ssDNA) strongly and with high sequence specificity. However, binding efficiency is dependent on the purine content of the PNA strand. This property make more difficult application of PNA as hybridization probes in, e.g., PNA chips, since at a set temperature the hybridization of a fraction of the DNA targets to the PNA probes does not obey Watson-Crick binding rules. The polypurine PNAs, for example, bind the mismatch containing DNA targets stronger, than the pyrimidine rich PNAs their fully complementary targets. Herein we show that PNA-DNA binding efficiency can be finely tuned by the conjugation of derivatives of naphthalene diimide (NADI) to the N-terminus of PNA using polyamide linkers of different lengths. This approach can potentially be used for the design of PNA probes, which bind their DNA targets with similar affinity independently of the PNA sequence.     

Targeting species-specific low-affinity 16S rRNA binding sites by using peptide nucleic acids for detection of Legionellae in biofilms

Using fluorescence in situ hybridization to detect bacterial groups has several inherent limitations. DNA probes are generally used, targeting sites on the 16S rRNA. However, much of the 16S rRNA is highly conserved, with variable regions often located in inaccessible areas where secondary structures can restrict probe access. Here, we describe the use of peptide nucleic acid (PNA) probes as a superior alternative to DNA probes, especially when used for environmental samples. A complex bacterial genus (Legionella) was studied, and two probes were designed, one to detect all species and one targeted to Legionella pneumophila. These probes were developed from existing sequences and are targeted to low-binding-affinity sites on the 16S rRNA. In total, 47 strains of Legionella were tested. In all cases, the Legionella spp. PNA probe labeled cells strongly but did not bind to any non-Legionella species. Likewise, the specific L. pneumophila PNA probe labeled only strains of L. pneumophila. By contrast, the equivalent DNA probes performed poorly. To assess the applicability of this method for use on environmental samples, drinking-water biofilms were spiked with a known concentration of L. pneumophila bacteria. Quantifications of the L. pneumophila bacteria were compared using PNA hybridization and standard culture methods. The culture method quantified only 10% of the number of L. pneumophila bacteria found by PNA hybridization. This illustrates the value of this method for use on complex environmental samples, especially where cells may be in a viable but noncultivable state.