One-proton catalysis by the alpha-L-arabinofuranosidase III of Monilinia fructigena.

1. Michaelis-Menten parameters for the hydrolysis of p-nitrophenyl alpha-L-arabinofuranoside were measured as a function of pL (pH or pD) in both 1H2O and 2H2O. 2. The variation of both Vmax. and Vmax./Km with pL is sigmoid, the pK governing Vmax. shifting from 6.34 +/- 0.05 in 1H2O to 6.84 +/- 0.07 in 2H2O, and that governing Vmax./Km from 5.89 +/- 0.03 in 1H2O to 6.38 +/- 0.05 in 2H2O. 3. In the plateau regions there is a small inverse solvent isotope effect on Vmax./Km (0.92), and one of 1.45 on Vmax. 4. The variation of Vmax. with isotopic composition is strictly linear, indicating that the isotope effect arises from the transfer of a single proton.     

Interfacial reaction dynamics and acyl-enzyme mechanism for lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters

The fatty acyl (lipid) p-nitrophenyl esters p-nitrophenyl caprylate, p-nitrophenyl laurate and p-nitrophenyl palmitate that are incorporated at a few mol % into mixed micelles with Triton X-100 are substrates for bovine milk lipoprotein lipase. When the concentration of components of the mixed micelles is approximately equal to or greater than the critical micelle concentration, time courses for lipoprotein lipase-catalyzed hydrolysis of the esters are described by the integrated form of the Michaelis-Menten equation. Least square fitting to the integrated equation therefore allows calculation of the interfacial kinetic parameters Km and Vmax from single runs. The computational methodology used to determine the interfacial kinetic parameters is described in this paper and is used to determine the intrinsic substrate fatty acyl specificity of lipoprotein lipase catalysis, which is reflected in the magnitude of kcat/Km and kcat. The results for interfacial lipoprotein lipase catalysis, along with previously determined kinetic parameters for the water-soluble esters p-nitrophenyl acetate and p-nitrophenyl butyrate, indicate that lipoprotein lipase has highest specificity for the substrates that have fatty acyl chains of intermediate length (i.e. p-nitrophenyl butyrate and p-nitrophenyl caprylate). The fatty acid products do not cause product inhibition during lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters that are contained in Triton X-100 micelles. The effects of the nucleophiles hydroxylamine, hydrazine, and ethylenediamine on Km and Vmax for lipoprotein lipase catalyzed hydrolysis of p-nitrophenyl laurate are consistent with trapping of a lauryl-lipoprotein lipase intermediate. This mechanism is confirmed by analysis of the product lauryl hydroxamate when hydroxylamine is the nucleophile. Hence, lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters that are contained in Triton X-100 micelles occurs via an interfacial acyl-lipoprotein lipase mechanism that is rate-limited by hydrolysis of the acyl-enzyme intermediate.     

Peroxidase-catalyzed N-demethylation reactions: deuterium solvent isotope effects

The effect of D2O on the kinetic parameters for the hydroperoxide-supported N-demethylation of N,N-dimethylaniline catalyzed by chloroperoxidase and horseradish peroxidase was investigated in order to assess the roles of exchangeable hydrogens in the demethylation reaction. The initial rate of the chloroperoxidase-catalyzed N-demethylation of N,N-dimethylaniline supported by ethyl hydroperoxide exhibited a pL optimum (where L denotes H or D) of 4.5 in both H2O and D2O. The solvent isotope effect on the initial rate of the chloroperoxidase-catalyzed demethylation reaction was independent of pL, suggesting that the solvent isotope effect is not due to a change in the pK of a rate-controlling ionization in D2O. The solvent isotope effect on the Vmax for the chloroperoxidase-catalyzed demethylation reaction was 3.66 +/- 0.62. In contrast, the solvent isotope effect on the Vmax for the horseradish peroxidase catalyzed demethylation reaction was approximately 1.5 with either ethyl hydroperoxide or hydrogen peroxide as the oxidant, indicating that the exchange of hydrogens in the enzyme and hydroperoxide for deuterium in D2O has little effect on the rate of the demethylation reaction. The solvent isotope effect on the Vmax/KM for ethyl hydroperoxide in the chloroperoxidase-catalyzed demethylation reaction was 8.82 +/- 1.57, indicating that the rate of chloroperoxidase compound I formation is substantially decreased in D2O. This isotope effect is suggested to arise from deuterium exchange of the hydroperoxide hydrogen and of active-site residues involved in compound I formation. A solvent isotope effect of 2.96 +/- 0.57 was observed on the Vmax/KM for N,N-dimethylaniline in the chloroperoxidase-catalyzed reaction.(ABSTRACT TRUNCATED AT 250 WORDS)     

Acylation of subtilisin A by aryl esters: contribution to rate limitation by a physical step preceding general acid-base catalysis

The specificity ratios kc/Km = k for subtilisin A catalyzed hydrolysis of five aryl esters of N-(methoxycarbonyl)-L-Phe (McPhe) were determined at pH 7.03 and its pD equivalent. The ratios are independent of the electronic properties of the leaving group substituent. Kinetic solvent isotope effects, Dk, increase from about 0.9 to 1.3 as leaving group ability decreases from p-nitrophenolate to p-methoxyphenolate. The k of N-(methoxycarbonyl)-L-phenylalanine p-nitrophenyl ester (NPE) with native enzyme exhibits a strong temperature dependence; delta H* = 87 +/- 3 kJ mol-1 and delta S* = 148 +/- 14 J K-1 mol-1 at 25 degrees C (H2O). The Dk with this substrate is 1.36 at 13.6 degrees C, declines to 0.89 at 25 degrees C, and then increases to 1.04 at 39.4 degrees C. Above neutral pH(D), with McPhe NPE as substrate, the dependence of k is for the dissociated form of a single base of pKapp = 7.38 +/- 0.03 in H2O and 7.67 +/- 0.03 in D2O. The pKapp values are apparently those of the uncomplexed native protein. By contrast, k of 3-phenylpropanoic acid (Prop) p-nitrophenyl ester exhibits a weaker temperature dependence; delta H* = 20 kJ mol-1 and delta S* = -90 J K-1 mol-1 (H2O) at 25 degrees C. The Dk are larger than those for McPhe NPE, decreasing from 1.99 at 20.5 degrees C to 1.74 at 46.1 degrees C. These results, combined with those of previous studies, are consistent with limitation of k by at least two processes.(ABSTRACT TRUNCATED AT 250 WORDS)     

Transition-state structures for enzymatic and alkaline phosphotriester hydrolysis.

The primary and secondary 18O isotope effects for the alkaline (KOH) and enzymatic (phosphotriesterase) hydrolysis of two phosphotriesters, O,O-diethyl p-nitrophenyl phosphate (I) and O,O-diethyl O-(4-carbamoylphenyl) phosphate (II), are consistent with an associative mechanism with significant changes in bond order to both the phosphoryl and phenolic leaving group oxygens in the transition state. The synthesis of [15N, phosphoryl-18O]-, [15N, phenolic-18O]-, and [15N]-O,O-diethyl p-nitrophenyl phosphate and O,O-diethyl O-(4-carbamoylphenyl)phosphate is described. The primary and secondary 18O isotope effects for the alkaline hydrolysis of compound I are 1.0060 and 1.0063 +/- 0.0001, whereas for compound II they are 1.027 +/- 0.002 and 1.025 +/- 0.002, respectively. These isotope effects are consistent with the rate-limiting addition of hydroxide and provide evidence for a SN2-like transition state with the absence of a stable phosphorane intermediate. For the enzymatic hydrolysis of compound I, the primary and secondary 18O isotope effects are very small, 1.0020 and 1.0021 +/- 0.0004, respectively, and indicate that the chemical step in the enzymatic mechanism is not rate-limiting. The 18O isotope effects for the enzymatic hydrolysis of compound II are 1.036 +/- 0.001 and 1.0181 +/- 0.0007, respectively, and are comparable in magnitude to the isotope effects for alkaline hydrolysis, suggesting that the chemical step is rate-limiting. The relative magnitude of the primary 18O isotope effects for the alkaline and enzymatic hydrolysis of compound II reflect a transition state that is more progressed for the enzymatic reaction.     

Mechanism of action of lipoprotein lipase on triolein particles: effect of apolipoprotein C-II

Triolein particles stabilized by a phosphatidylcholine monolayer were used to study the lipoprotein lipase (LpL) reaction. They were prepared in two different sizes and with triolein and phosphatidylcholine in the molar ratios of 0.9-1.2 : 1 (small particles) and 8-17 : 1 (large particles). The rate of hydrolysis by LpL of phosphatidylcholine on the surface of both lipid particles was only 1/20 as much as that of triolein, even if it was activated to the maximum by apolipoprotein C-II (apoC-II). Thus, the phospholipase activity of LpL was low enough to measure the initial rate of hydrolysis of triolein without causing a gross change of the surface of the lipid particle. When the hydrolysis of triolein by LpL was monitored, fatty acid was released at a constant rate until all of the triolein molecules were hydrolyzed. The enzyme required 220 +/- 17 and 66 +/- 9 nM apoC-II for its half-maximal activity (Km (apoC-II] with small and large particles as a substrate (1.15 mM triolein for small and 2.13 mM triolein for large particles), respectively, using various concentrations of LpL. The Km(apoC-II) values for these two substrates became similar when LpL activity was analyzed with respect to the density of apoC-II on the phosphatidylcholine monolayer at the surface of the particles (bound apoC-II/phosphatidylcholine). The concentration of substrate particles did not affect the Km(apoC-II) values. The presence of an adequate amount of apoC-II increased the maximal activity of LpL (Vmax(triolein)) from 0.48 +/- 0.21 to 6.81 +/- 0.45 and from 0.32 +/- 0.04 to 7.13 +/- 0.64 mmol/h/mg with a slight decrease in the apparent Michaelis constant (Km(triolein)) for small (from 90 to 54 microM triolein) and large (from 1.00 to 0.65 mM triolein) particles, respectively. Although the apparent Km for triolein in large particles was about ten times greater than that in small particles, the values became similar when they were corrected for the concentration of phosphatidylcholine (50-100 microM phosphatidylcholine), which corresponded to the surface area of the substrate particles. It was suggested that bound apoC-II molecules were transferred relatively slowly to other lipid particles while LpL molecules moved rapidly among the lipid particles.(ABSTRACT TRUNCATED AT 400 WORDS)     

Structure-activity relationships in the hydrolysis of substrates by the phosphotriesterase from Pseudomonas diminuta

The mechanism and substrate specificity of the phosphotriesterase from Pseudomonas diminuta have been examined. The enzyme hydrolyzes a large number of phosphotriester substrates in addition to paraoxon (diethyl p-nitrophenyl phosphate) and its thiophosphate analogue, parathion. The two ethyl groups in paraoxon can be changed to propyl and butyl groups, but the maximal velocity and Km values decrease substantially. The enzyme will not hydrolyze phosphomonoesters or -diesters. There is a linear correlation between enzymatic activity and the pKa of the phenolic leaving group for 16 paraoxon analogues. The beta value in the corresponding Br?nsted plot is -0.8. No effect on either Vmax or Vmax/Km is observed when sucrose is used to increase the relative solvent viscosity by 3-fold. These results are consistent with rate-limiting phosphorus-oxygen bond cleavage. A plot of log V versus pH for the hydrolysis of paraoxon shows one enzymatic group that must be unprotonated for activity with a pKa of 6.1. The deuterium isotope effect by D2O on Vmax and Vmax/Km is 2.4 and 1.2, respectively, and the proton inventory is linear, which indicates that only one proton is "in flight" during the transition state. The inhibition patterns by the products are consistent with a random kinetic mechanism.     

Isotope effect studies of the role of metal ions in isocitrate dehydrogenase.

Pig heart NADP+-dependent isocitrate dehydrogenase requires a metal ion for activity. Under optimum conditions (pH 7.5, Mg2+ present), the carbon isotope effect is k12/k13 = 0.9989 +/- 0.0004 for the carboxyl carbon undergoing decarboxylation and hydrogen isotope effects are VmaxH/VmaxD = 1.09 +/- 0.04 and (Vmax/Km)H/(Vmax/Km)D = 0.76 +/- 0.12 with threo-D,L-[2-2H]isocitric acid. Deuterium isotope effects measured by the equilibrium perturbation technique under the same conditions are VH/VD = 1.20 for the forward reaction and 1.02 for the reverse reaction. Under these conditions the rate-determining step in the enzymatic reaction must be product release. Dissociation of isocitrate from the enzyme-isocitrate complex and the enzyme-NADP+ complex must be two or more orders of magnitude slower than the chemical steps. The catalytic activity of the enzyme is about tenfold lower in the presence of Ni2+ than in the presence of Mg2+. The carbon isotope effect in the presence of Ni2+ at pH 7.5 is k12/k13 = 1.0051 +/- 0.0012 and the hydrogen isotope effects are VmaxH/VmaxD = 0.98 +/- 0.07 and (Vmax/Km)H/(Vmax/Km)D = 1.11 +/- 0.14. Thus, the rate decrease caused by substitution of Ni2+ for Mg2+ must result from the effects of metal on substrate and product binding and dissociation, rather than effects of metal on catalysis. However, a more detailed analysis of the carbon isotope effects reveals that there is also a large metal effect on the rate of the decarboxylation step, consistent with the view that the carbonyl oxygen of the oxalosuccinate intermediate is coordinated to the metal during decarboxylation.     

Nature of oxygen activation in glucose oxidase from Aspergillus niger: the importance of electrostatic stabilization in superoxide formation.

Glucose oxidase catalyzes the oxidation of glucose by molecular dioxygen, forming gluconolactone and hydrogen peroxide. A series of probes have been applied to investigate the activation of dioxygen in the oxidative half-reaction, including pH dependence, viscosity effects, 18O isotope effects, and solvent isotope effects on the kinetic parameter Vmax/Km(O2). The pH profile of Vmax/Km(O2) exhibits a pKa of 7.9 +/- 0.1, with the protonated enzyme form more reactive by 2 orders of magnitude. The effect of viscosogen on Vmax/Km(O2) reveals the surprising fact that the faster reaction at low pH (1.6 x 10(6) M-1 s-1) is actually less diffusion-controlled than the slow reaction at high pH (1.4 x 10(4) M-1 s-1); dioxygen reduction is almost fully diffusion-controlled at pH 9.8, while the extent of diffusion control decreases to 88% at pH 9.0 and 32% at pH 5.0, suggesting a transition of the first irreversible step from dioxygen binding at high pH to a later step at low pH. The puzzle is resolved by 18O isotope effects. 18(Vmax/Km) has been determined to be 1.028 +/- 0.002 at pH 5.0 and 1.027 +/- 0.001 at pH 9.0, indicating that a significant O-O bond order decrease accompanies the steps from dioxygen binding up to the first irreversible step at either pH. The results at high pH lead to an unequivocal mechanism; the rate-limiting step in Vmax/Km(O2) for the deprotonated enzyme is the first electron transfer from the reduced flavin to dioxygen, and this step accompanies binding of molecular dioxygen to the active site. In combination with the published structural data, a model is presented in which a protonated active site histidine at low pH accelerates the second-order rate constant for one electron transfer to dioxygen through electrostatic stabilization of the superoxide anion intermediate. Consistent with the proposed mechanisms for both high and low pH, solvent isotope effects indicate that proton transfer steps occur after the rate-limiting step(s). Kinetic simulations show that the model that is presented, although apparently in conflict with previous models for glucose oxidase, is in good agreement with previously published kinetic data for glucose oxidase. A role for electrostatic stabilization of the superoxide anion intermediate, as a general catalytic strategy in dioxygen-utilizing enzymes, is discussed.     

Reaction of lecithin cholesterol acyltransferase with water-soluble substrates

To separate the interfacial and catalytic reactions of lecithin cholesterol acyltransferase (LCAT), we carried out the first investigation of its reaction with water-soluble substrates. We used a continuous spectrophotometric assay for the hydrolysis of p-nitrophenyl esters of fatty acids to determine the chain length specificity of the enzyme and its modulation by anions and apolipoproteins in solution. By chemical modification of amino acid residues, we demonstrated that the active site serine and histidine residues participate in both the esterase and acyltransferase reactions but that cysteine residues are not involved in the esterase reaction. The kinetics of the LCAT reaction were measured for p-nitrophenyl esters of fatty acids having up to six (C-6) carbons in length. With increasing acyl chain lengths the optimal reaction rates occurred for the C-5 ester and Km and Vmax values decreased progressively, while the specificity constant, kcat/Km, increased. The same series of substrates and longer chain esters, up to C-16, were also reacted with LCAT in the presence of Triton X-100 in order to determine the general trends for the reaction rates as a function of chain length. The observed trends for the reaction rates and kinetic constants were attributed to an increasing binding affinity for the longer acyl chains in a large hydrophobic cavity, with a concomitant restriction in the motions of the substrates and a decreased probability for the correct positioning of the ester bond for hydrolysis, resulting in a decreased substrate turnover. Since the kinetics of the interfacial reactions of LCAT are very sensitive to the presence of anions and apolipoproteins, in particular apoA-I, we investigated the effects of these modulators on the reactions of LCAT in solution. Unlike the interfacial reactions, the hydrolysis of the p-nitrophenyl esters was not affected by 0.1 M concentrations of anions nor by water-soluble apolipoproteins (apoA-I, apoA-II, and apoCs). Thus the regulation of the activity of LCAT is mediated largely by the interfaces on which it acts.     

Mechanistic studies on the human matrix metalloproteinase stromelysin.

To probe the mechanism of stromelysin (SLN)-catalyzed peptide hydrolysis, we determined the pH dependence of kc/Km and solvent deuterium isotope effects on kc and kc/Km. pH dependencies of kc/Km were determined for the SLN-catalyzed hydrolysis of three peptides: Arg-Pro-Lys-Pro-Gln-Gln-Phe-Phe-Gly-Leu-Nle-NH2,Arg-Pro-Ala-Pro-Gln-Gln- Phe-Phe - Gly-Leu-NleNH2, and N-acetyl-Arg-Pro-Ala-Pro-Gln-Gln-Phe-Phe-Gly-Leu-Nle-NH2 (cleavage at Gln-Phe bond). The pH dependencies are all bell-shaped with shoulders that extend from pH 7.5 to 8.5. The existence of a shoulder indicates that the reaction mechanism involves at least two routes to products. These curves are governed by three proton ionizations with pKa values of 5.4, 6.1, and 9.5. The solvent isotope effect measurements provided the following values: D(kc/Km) = 0.80 +/- 0.05 and D(kc) = 1.58 +/- 0.05. That D(kc/Km) and D(kc) are different suggests that the rate-limiting transition states for the processes governed by kc/Km and kc cannot be the same. We use these results, together with analogy to thermolysin catalysis, to develop a mechanism for SLN catalysis.     

Mechanism and activation for allosteric adenosine 5'-monophosphate nucleosidase. Kinetic alpha-deuterium isotope effects for the enzyme-catalyzed hydrolysis of adenosine 5'-monophosphate and nicotinamide mononucleotide

The kinetic alpha-deuterium isotope effect on Vmax/Km for hydrolysis of NMN catalyzed by AMP nucleosidase at saturating concentrations of the allosteric activator MgATP2- is kH/kD = 1.155 +/- 0.012. This value is close to that reported previously for the nonenzymatic hydrolysis of nucleosides of related structure, suggesting that the full intrinsic isotope effect for enzymatic NMN hydrolysis is expressed under these conditions; that is, bond-changing reactions are largely or completely rate-determining and the transition state has marked oxocarbonium ion character. The kinetic alpha-deuterium isotope effect for this reaction is unchanged when deuterium oxide replaces water as solvent, corroborating this conclusion. Furthermore, this isotope effect is independent of pH over the range 6.95-9.25, for which values of Vmax/Km change by a factor of 90, suggesting that the isotope-sensitive and pH-sensitive steps for AMP-nucleosidase-catalyzed NMN hydrolysis are the same. Values of kH/kD for AMP nucleosidase-catalyzed hydrolysis of NMN decrease with decreasing saturation of enzyme with MgATP2- and reach unity when the enzyme is less than half-saturated with this activator. This requires that the rate-determining step changes from cleavage of the covalent C-N bond to one which is isotope-independent. In contrast to the case for NMN hydrolysis, AMP nucleosidase-catalyzed hydrolysis of AMP at saturating concentrations of MgATP2- shows a kinetic alpha-deuterium isotope effect of unity. Thus, covalent bond-changing reactions are largely or completely rate-determining for hydrolysis of a poor substrate, NMN, but make little or no contribution to rate-determining step for hydrolysis of a good substrate, AMP, by maximally activated enzyme. This behavior has several precedents.     

The catalytic mechanism of carbonic anhydrase. Hydrogen-isotope effects on the kinetic parameters of the human C isoenzyme.

1. The steady-state kinetics of the interconversion of CO2 and HCO3 catalyzed by human carbonic anhydrase C was studied using 1H2O and 2H2O as solvents. The pH-independent parts of the parameters k(cat) and Km are 3-4 times larger in 1H2O than in 2H2O for both directions of the reaction, while the ratios k(cat)/Km show much smaller isotope effects. With either CO2 or HCO3 as substrate the major pH dependence is observed in k(cat), while Km appears independent of pH. The pKa value characterizing the pH-rate profiles is approximately 0.5 unit larger in 2H2O than in 1H2O. 2. The hydrolysis of p-nitrophenyl acetate catalyzed by human carbonic anhudrase C is approximately 35% faster in 2H2O than in 1H2O. In both solvents the pKa values of the pH-rate profiles are similar to those observed for the CO2-HCO3 interconversion. 3. It is tentatively proposed that the rate-limiting step at saturating concentrations of CO2 or HCO3 is an intramolecular proton transfer between two ionizing groups in the active site. It cannot be decided whether the transformation between enzyme-bound CO2 and HCO3 involves a proton trnasfer or not.     

Deuterium isotope effects in the unusual addition of toluene to fumarate catalyzed by benzylsuccinate synthase

The first step in the anaerobic metabolism of toluene is a highly unusual reaction: the addition of toluene across the double bond of fumarate to produce (R)-benzylsuccinate, which is catalyzed by benzylsuccinate synthase. Benzylsuccinate synthase is a member of the glycyl radical-containing family of enzymes, and the reaction is initiated by abstraction of a hydrogen atom from the methyl group of toluene. To gain insight into the free energy profile of this reaction, we have measured the kinetic isotope effects on Vmax and Vmax/Km when deuterated toluene is the substrate. At 30 degrees C the isotope effects are 1.7 +/- 0.2 and 2.9 +/- 0.1 on Vmax and Vmax/Km, respectively; at 4 degrees C they increase slightly to 2.2 +/- 0.2 and 3.1 +/- 0.1, respectively. We compare these results with the theoretical isotope effects on Vmax and Vmax/Km that are predicted from the free energy profile for the uncatalyzed reaction, which has previously been computed using density functional theory [Himo, F. (2002) J. Phys. Chem. B 106, 7688-7692]. The comparison allows us to draw some conclusions on how the enzyme may catalyze this unusual reaction.     

The effect of glycerol on the activity of beta-glucosidase from Botryodiplodia theobromae Pat.

1. In the activity of the high-Mr beta-glucosidase A (beta-D-glucoside glucohydrolase, EC 3.2.1.21) obtained from culture filtrates of Botryodiplodia theobromae Pat. on o-nitrophenyl beta-D-glucopyranoside as substrate, both Vmax. and Km increased non-linearly with increasing concentration of glycerol, and the Vmax./Km(app.) ratio decreased non-linearly with increasing concentration of glycerol. 2. No increase in rate was observed with phenyl beta-D-glucopyranoside as substrate in the presence of up to 250 mM-glycerol, indicating that glucosylation is rate-limiting with this substrate. 3. With o-nitrophenyl beta-D-glucopyranoside, p-nitrophenyl beta-D-glucopyranoside and phenyl beta-D-glucopyranoside as substrates, kappa cat. values of 793.7 s-1, 62.8 s-1 and 5.4 s-1 respectively were calculated. 4. With o-nitrophenyl beta-D-glucopyranoside and phenyl beta-D-glucopyranoside as substrate, alpha-deuterium kinetic isotope effects of 1.9 +/- 0.03 and 1.01 +/- 0.01 respectively were found; in the presence of 200 mM-glycerol the values were 1.21 +/- 0.03 and 1.02 +/- 0.01 respectively. 5. In the presence of a large excess of o-nitrophenyl beta-D-glucopyranoside [( S] = 35.7 Km), the amount of o-nitrophenol and also of the transglucosylation product formed by beta-glucosidase action increased non-linearly, whereas that of glucose formed decreased non-linearly with increasing glycerol concentration. 6. All these results were found to fit the data calculated from rate equations derived on the basis of the proposed mechanism of enzyme action involving two ion-pair intermediates and a covalent alpha-D-glucosyl-enzyme in the reaction sequence [Umezurike (1987) Biochem. J. 241, 455-462].     

Synthesis and characterization of a new cutinase substrate, 4-nitrophenyl (16-methyl sulfone ester) hexadecanoate

Phytopathogenic fungi penetrate plants by breaking down the cuticular barrier with cutinase. Cutinases are extracellular hydrolytic enzymes that degrade cutin, a polyester composed of hydroxy and epoxy fatty acids. Until now, cutinase has been recognized by its ability to release labeled cutin monomers or by a non-specific esterase assay based on the hydrolysis of p-nitrophenyl esters of short fatty acids. In this work, an insoluble p-nitrophenyl derivative was synthesized and purified, and its structure was determined to be 4-nitrophenyl (16-methyl sulfone ester) hexadecanoate (pNMSEH) by nuclear magnetic resonance (H+ NMR) analysis. pNMSEH was tested as a new cutinase substrate with Pseudomonas mandocino cutinase and porcine liver esterase. While a linear release over time of p-nitrophenol (pNP) was recorded in the presence of cutinase, no response was obtained with the esterase. The calculated kinetic parameters of pNMSEH hydrolysis by cutinase revealed a high specificity (Km=1.8mM), albeit a low catalytic rate (Vmax=10.5 micromol min(-l)l(-1)). This new synthetic substrate may be helpful for detecting and assaying cutinase activity in mixed solutions, such as crude fungal extracellular extracts.     

Relative reactivity of thiamine monophosphate and thiamine diphosphate upon interaction with alkaline phosphatase

Reactivity of thiamin monophosphate (TMP) as calf intestinal alkaline phosphatase substrate in model transformations is lower comparing with thiamin diphosphate (TDP) reactivity. Under these conditions alkaline phosphatase catalyzes TDP, ADP and AMP hydrolysis approximately at same rate. It was shown that TDP competes with p-nitrophenyl phosphate more effectively than TMP for the binding in the active site. At pH 8.5 and 30 degrees C Km values are as follows: (5.2 +/- 1.6) x 10(-3) M for TMP and (3.0 +/- 0.8) x 10(-4) M for TDP. Under the same conditions the Vmax/Km value for TDP hydrolysis is 53 times higher than the one for corresponding reaction of TMP. It was suggested that positively charged thiazolium ion of TMP interacts with the nearest environment at the active center and by this way reduces enzyme activity.     

N omega-hydroxy-L-arginine is an intermediate in the biosynthesis of nitric oxide from L-arginine.

Authentic N omega-hydroxy-L-arginine was synthesized and used to determine whether it is an intermediate in nitric oxide (.NO) synthesis from L-arginine by macrophage .NO synthase. The apparent Km (6.6 microM) and Vmax (99 nmol x min-1 x mg-1) observed with N omega-hydroxy-L-arginine were similar to those observed with L-arginine (Km = 2.3 microM; Vmax = 54 mumol x min-1 x mg-1). N omega-Hydroxy-D-arginine was not a substrate. Stable isotope studies showed that .NO synthase exclusively oxidized the hydroxylated nitrogen of N omega-hydroxy-L-arginine, forming .NO and L-citrulline. As with L-arginine, O2 was the source of the ureido oxygen in L-citrulline from N omega-hydroxy-L-arginine. In the presence of excess N omega-hydroxy-L-arginine, .NO synthase generated a metabolite of L-[14C]arginine that cochromatographed with authentic N omega-hydroxy-L-arginine. The labeled metabolite exhibited identical chromatographic behavior in three solvent systems and generated the same product (L-citrulline) upon alkaline hydrolysis as authentic N omega-hydroxy-L-arginine. Experiments were then run to identify which redox cofactor (NADPH or tetrahydrobiopterin) participated in the enzymatic synthesis of N omega-hydroxy-L-arginine. Both cofactors were required for synthesis of .NO from either N omega-hydroxy-L-arginine or L-arginine. However, with L-arginine, the synthesis of 1 mol of .NO was coupled to the oxidation of 1.52 +/- 0.02 mol of NADPH; whereas with N omega-hydroxy-L-arginine, only 0.53 +/- 0.04 mol of NADPH was oxidized per mol of .NO formed. These results support a mechanism in which N omega-hydroxy-L-arginine is generated as an intermediate in .NO synthesis through an NADPH-dependent hydroxylation of L-arginine.     

The effect of pH, temperature, and D2O on the activity of porcine synovial collagenase and gelatinase

The pH dependence of Vmax and Vmax/Km for hydrolysis of Dnp-Pro-Leu-Gly-Leu-Trp-Ala-D-Arg-NH2 at the Gly-Leu bond by porcine synovial collagenase and gelatinase was determined in the pH range 5-10. Both enzymes exhibited bell-shaped dependencies on pH for these two kinetic parameters, indicating that activity is dependent on at least two ionizable groups, one of which must be unprotonated and the other protonated. For collagenase, Vmax/Km data indicate that in the substrate-free enzyme, these groups have apparent pK values of 7.0 and 9.5, while the Vmax profile indicates similar pK values of 6.8 and 10.1 for the enzyme-substrate complex. The corresponding pH profiles of gelatinase were similar to those of collagenase, indicating the importance of groups with apparent pK values of 5.9 and 10.0 for the free enzyme and 5.9 and 11.1 for the enzyme-substrate complex. When these kinetic constants were determined in D2O using the peptide substrate, there was no significant effect on Vmax or Km for collagenase or Km for gelatinase. However, there was a deuterium isotope effect of approximately 1.5 on Vmax for gelatinase. These results indicate that a proton transfer step is not involved in the rate-limiting step for collagenase, but may be limiting with gelatinase. The Arrhenius activation energies for peptide bond hydrolysis of the synthetic peptide as well as the natural substrates were also determined for both enzymes. The activation energy (81 kcal) for hydrolysis of collagen by collagenase was nine times greater than that determined for the synthetic substrate (9.2 kcal). In contrast, the activation energy for hydrolysis of gelatin by gelatinase (26.3 kcal) was only 2.4 times greater than that for the synthetic substrate (11 kcal).