Effect of lipids and detergents on the production and solubilization of extracellular lipase inYarrowia lipolytica

Triglycerides, oleic acid but not fatty acid-containing, nonionic detergents (Spans, Tweens) were able to stimulate the synthesis of cell-bound and soluble lipase ofYarrowia lipolytica grown in a complex medium containing citrate and urea. The optimal concentration of olive oil for induction was 0.5% (W/V). The combined effect of a high ionic strength (0.75 mol/L KCl) and of digitonin (2 mmol/L) at pH 7.6 resulted in solubilization of 80% of the cell-bound lipase and a significant activation of the enzyme. Comparison of twoY. lipolytica strains showed the effects of Mg²⁺ and Fe³⁺ concentrations in the medium on the synthesis of the enzyme to be strongly strain-dependent.     

Cloning,expression, and characterization of Aureobasidium melanogenum lipase in Pichia pastoris

cDNA of Aureobasidium melanogenum lipase comprises 1254 bp encoding 417 amino acids, whereas genomic DNA of lipase comprises 1311 bp with one intron (57 bp). The lipase gene contains a putative signal peptide encoding 26 amino acids. The A. melanogenum lipase gene was successfully expressed in Pichia pastoris. Recombinant lipase in an inducible expression system showed the highest lipase activity of 3.8 U/mL after six days of 2% v/v methanol induction. The molecular mass of purified recombinant lipase was estimated as 39 kDa using SDS-PAGE. Optimal lipase activity was observed at 35–37 °C and pH 7.0 using p-nitrophenyl laurate as the substrate. Lipase activity was enhanced by Mg²⁺, Mn²⁺, Li⁺, Ca²⁺, Ni²⁺, CHAPS, DTT, and EDTA and inhibited by Hg²⁺, Ag⁺, SDS, Tween 20, and Triton X-100. The addition of 10% v/v acetone, DMSO, p-xylene, and octanol increased lipase activity, whereas that of propanol and butanol strongly inhibited it.     

Gene cloning,expression and characterization of a cold-adapted lipase from a psychrophilic deep-sea bacterium Psychrobacter sp. C18

A psychrophilic bacterium Psychrobacter sp. C18 previously isolated from the Southern Okinawa Trough deep-sea sediments showed extracellular lipolytic activity towards tributyrin. A genomic DNA library was constructed and screened to obtain the corresponding lipase gene. The sequenced DNA fragment contains an open reading frame of 945 bp, which was denoted as the lipX gene, from which a protein sequence LipX was deduced of 315 amino acid residues with a molecular mass of 35,028 Da. This protein contained the bacterial lipase GNSMG (GxSxG, x represents any amino acid residue) and HG consensus motifs. The recombinant pET28a(+)/lipX gene was overexpressed in heterologous host Escherichia coli BL21 (DE3) cells to overproduce the lipase protein LipX_His with a 6× histidine tag at its C-terminus. Nickel affinity chromatography was used for purification of the expressed recombinant lipase. The maximum lipolytic activity of the purified recombinant lipase was obtained at temperature of 30°C and pH 8.0 with p-nitrophenyl myristate (C14) as a substrate. Thermostability assay indicated that the recombinant LipX_His is a cold-adapted lipase, which was active in 10% methanol, ethanol, acetone and 30% glycol, and inhibited partially by Zn²⁺, Co²⁺, Mn²⁺, Fe³⁺ and EDTA. Most non-ionic detergents, such as DMSO, Triton X-100, Tween 60 and Tween 80 enhanced the lipase activity but 1% SDS completely inhibited the enzyme activity. Additionally, the highest lipolytic rate of the recombinant LipX_His lipase was achieved when p-nitrophenyl myristate was used as a substrate, among all the p-nitrophenyl esters tested.     

Electrical microenvironment influence on the hydrolytic activity of free and immobilised Yarrowia lipolytica lipase

Summary The role of electrical properties of interfaces upon the activity of free and immobilised Yarrowia lipolytica lipase has been investigated. Sodium taurocholate and Sedipur 400, an anionic polyacrylamide, enhance the negative character of the fatty droplets of substrate and tend to improve the lipolytic activity while the cationic polyacrylamide (Sedipur 900) has opposite effects. Ca²⁺ which reduces the fatty droplets charge as Sedipur 900, is however a good activator of the enzyme. The role of electrical properties on the optimum pH of the immobilised enzyme is clearer. Immobilisation of the lipase on a positively charged support shifts its optimum pH to acidic pH by repulsion towards H⁺ ions around the support.     

A thermoalkaliphilic lipase of <Emphasis Type="Italic">Geobacillus</Emphasis> sp. T1

A thermoalkaliphilic T1 lipase gene of Geobacillus sp. strain T1 was overexpressed in pGEX vector in the prokaryotic system. Removal of the signal peptide improved protein solubility and promoted the binding of GST moiety to the glutathione-Sepharose column. High-yield purification of T1 lipase was achieved through two-step affinity chromatography with a final specific activity and yield of 958.2 U/mg and 51.5%, respectively. The molecular mass of T1 lipase was determined to be approximately 43 kDa by gel filtration chromatography. T1 lipase had an optimum temperature and pH of 70°C and pH 9, respectively. It was stable up to 65°C with a half-life of 5 h 15 min at pH 9. It was stable in the presence of 1 mM metal ions Na⁺, Ca²⁺, Mn²⁺, K⁺ and Mg²⁺ , but inhibited by Cu²⁺, Fe³⁺ and Zn²⁺. Tween 80 significantly enhanced T1 lipase activity. T1 lipase was active towards medium to long chain triacylglycerols (C10–C14) and various natural oils with a marked preference for trilaurin (C12) (triacylglycerol) and sunflower oil (natural oil). Serine and aspartate residues were involved in catalysis, as its activity was strongly inhibited by 5 mM PMSF and 1 mM Pepstatin. The T _m for T1 lipase was around 72.2°C, as revealed by denatured protein analysis of CD spectra.     

Overexpression of acid protease of <Emphasis Type="Italic">Saccharomycopsis fibuligera</Emphasis> in <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> and characterization of the recombinant acid protease for skimmed milk clotting

The gene encoding an acid protease natively produced by Saccharomycopsis fibuligera was cloned and overexpressed in Yarrowia lipolytica and the resultant recombinant acid protease was purified and characterized. The molecular mass of the purified enzyme was estimated as 94.8 kDa by gel filtration chromatography. The optimal pH and temperature of the purified acid protease were 3.5 and 33°C, respectively, and the enzyme was very stable over a pH range of 1.0 ∼ 3.0. The recombinant acid protease was activated by Zn²⁺, but was inhibited by Hg²⁺, Fe²⁺, Fe³⁺, and Mg²⁺, EDTA, EGTA, iodoacetic acid, and pepstatin. The purified recombinant acid protease from the positive transformant 71 had high milk clotting activity, suggesting that it may be used as a rennet substitute in the cheese industry.     

Preparation of a novel hydrophobic affinity cryogel for adsorption of lipase and its utilization as a chromatographic adsorbent for fast protein liquid chromatography

In this study, we have prepared a hydrophobic cryogel for the chromatographic separation of lipase from its aqueous solutions including single protein and protein mixture and also Yarrowia lipolytica cell extract. N‐methacryloyl‐(l )‐phenylalanine methyl ester was used as a monomer to provide the hydrophobic character to the prepared cryogels. The highest adsorption capacity was observed at pH 5.0 at 0.5 mL min^?1 flow rate. The chromatographic separation of lipase was achieved from a binary mixture of lipase:bovine serum albumin (BSA) and lipase:lysozyme, and was also achieved from triple‐mixture of lipase:lysozyme:BSA by using fast protein liquid chromatography. Finally, lipase purification was performed from Yarrowia lipolytica cell extract used as a natural source. These studies have shown that the hydrophobic cryogel has good chromatographic performance for the separation and purification of lipase not only from aqueous solution, but also from cell extract as a natural source of lipase. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:376–382, 2014     

Purification and characterization of the extracellular lipase Lip2 from Yarrowia lipolytica

An extracellular lipase from Yarrowia lipolytica (YlLip2) has been purified by ion exchange chromatography on Q sepharose FF, followed by hydrophobic interaction chromatography on butyl sepharose FF. SDS-PAGE showed that the molecular weight of this lipase is about 38 kDa. N-terminal amino acid sequencing and MALDI-TOF mass spectral analysis showed that this lipase is encoded by gene LIP2 (GenBank accession no. AJ012632). Enzymatic deglycosylation showed that this lipase is a glycosylated protein which contains about 12% sugar. The corresponding deglycosylated lipase remained 88% specific activity of untreated lipase. There was a high amino acid sequence identity (91%) between YlLip2 and Candida deformans lipase CdLip1 (GenBank accession no. AJ428393). The optima temperature and pH for the purified lipase was 40 °C and 8.0, respectively. The lipase showed a preference for long chain fatty acid methyl esters (C12–C16), with the highest activity toward methyl myristate (C14). Lipase activity was stimulated by Ca²⁺ and Mg²⁺ and inhibited by Zn²⁺, Ni²⁺ and Cu²⁺, whereas EDTA had no effect on its activity. A 0.1% of Tween 80 and Span 65 increased slightly the enzyme activity and SDS inhibited it.     

Isolation and functional characterization of lipase from the thermophilic alkali-tolerant bacterium Thermosyntropha lipolytica

As a result of sequencing the genome of the termophilic alkali-tolerant lipolytic bacterium Thermosyntropha lipolytica, the gene encoding a lipase secreted into the medium was identified. The recombinant enzyme was expressed in Escherichia coli. It was isolated, purified, and functionally characterized. The lipase exhibited hydrolytic activity toward para-nitrophenyl esters of various chain lengths, as well as triglycerides, including vegetable oils. The optimal reaction conditions were achieved at temperatures from 70 to 80°C and pH 8.0. This new thermostable lipase may be a promising biocatalyst for organic synthesis; it may find application in the food and detergent industry and biodiesel production.     

Methyl Oleate Modulates <Emphasis Type="Italic">LIP2</Emphasis> Expression in the Lipolytic Yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Methyl oleate was used as a primary carbon source and as an alternative inducer for the production of an extracellular lipase, Lip2, in Y. lipolytica strain LgX64.81 grown in a 20-l bioreactor. The lipase-encoding gene, LIP2, was investigated during culture on methyl oleate using a pLIP2–LacZ reporter fusion and we provide evidence for the involvement of methyl oleate in its regulation. Revisions requested 7 July 2005; Revisions received 30 August 2005     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

PARTIAL PURIFICATION AND CHARACTERIZATION OF THE ORGANIC SOLVENT-TOLERANT LIPASE PRODUCED BY Pseudomonas fluorescens RB02-3 ISOLATED FROM MILK

Eighty-five putative Pseudomonas isolates were obtained from various raw milk and pasteurized milk samples using Pseudomonas CFC agar. Among them, 36 isolates were identified as Pseudomonas fluorescens, and one isolate was identified as Pseudomonas putida. Lipase activity of the strains was quantitatively measured by the spectrophotometric method using p-nitrophenyl palmitate (p-NPP) as substrate. Detected lipase activity of the strains was between 10.03 U/mL and 22.16 U/mL. Pseudomonas fluorescens RB02-3 possessed the highest lipase activity. The extracellular lipase of P. fluorescens RB02-3 strain was homogeneously purified using a combination of ammonium sulfate precipitation, dialysis, and gel filtration column chromatography. This purification procedure resulted in 2.97-fold purification with 20.3% recovery. The enzyme was characterized, and exhibited maximum activity at pH 7.0 and 50°C; after it was incubated for 1 h it was activated in the presence of hexane, ethyl acetate, isopropanol, and ethanol and remained stable after the incubation was extended for 2 hr. The lipase was slightly inhibited in the presence of Zn²⁺, Co²⁺, Cu²⁺, Ni²⁺ salts, and ethylenediamine tetraacetic acid (EDTA), whereas Cd²⁺, sodium dodecyl sulfate (SDS), and Tween-80 had no effect on its activity.     

Capacity of N- and C-domains of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> flo1p cell wall protein homologue to expose lip2 lipase on cell surface of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> yeast

The closest homologue of the Saccharomyces cerevisiae Flo1p cell wall protein was detected in Yarrowia lipolytica yeast (YALI0C09031p) by the method of genomic analysis, and capacity of its N- and C-domains to expose the Lip2 lipase on the cell surface was studied. The efficient fixation of the enzyme on the Y. lipolytica cell wall surface was demonstrated. The activity of the cell-bound lipase was 9170 and 3200 units per 1 g of dry solid matter when using N- and C-domains of the cell wall protein, respectively. At the same time, in the case of immobilization using the N-domain, approximately 30% of the total lipase activity was detected in the culture medium, whereas when using C-domain of the cell wall protein YALI0C09031p, practically all lipase was in the immobilized state. Obtained values of the level of the cell-bound lipase activity considerably exceed previously published data opening a prospect for new technological solutions which meet industrial needs.     

Screening and its potential application of lipolytic activity from a marine environment: characterization of a novel esterase from <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> CL180

To develop an enantioselective lipase/esterase hydrolyzing racemic ofloxacin ester to levofloxacin, samples were collected from a variety of marine environments such as cold sea, hydrothermal vent area, sediment, tidal flat area, arctic sea, marine organisms, and so on. Microorganisms were isolated by plating on an enrichment medium with simultaneous detection of lipolytic activities and screened for the hydrolysis of ofloxacin ester. Three candidates among isolates were selected, and one of them, identified as Yarrowia lipolytica CL180, hydrolyzed preferentially S-enantiomer of racemic ofloxacin ester. The lipase/esterase gene (yli180) was cloned by screening a genomic library. The sequence analysis revealed an open reading frame consisting of 1,431 bp that encoded a protein of 476 amino acids with a molecular mass of 53 kDa. The yli180 gene was expressed in Escherichia coli and purified to homogeneity. The optimum activity of the recombinant protein (rYli180) occurred at pH 7.5 and 35°C, respectively. rYli180 preferentially hydrolyzed p-nitrophenyl esters of fatty acids with short chain lengths of ≤10 carbon atoms. This study represents a novel esterase of type B1 carboxylesterase/lipase family from a marine isolate, showing a potential usage as a biocatalyst because of enantioselectivity toward racemic ofloxacin ester.     

Production and Properties of Lipase from a Newly Isolated Chromobacterium

Out of some 750 strains of microorganisms, a potent bacterium for lipase production was isolated from soil and was identified as Chromobacterium viscosum.

The bacterium accumulates lipase in culture fluid when grown aerobically at 26°C for 3 days in a medium composed of soluble starch, soy bean meal, lard and inorganic salts.

Chromobacterium lipase had an optimum pH of 7.0 for activity at 37°C, and an optimal temperature of 65°C at pH 7.0. The enzyme retained 80% of the activity when heated for 10 min at 70°C. This lipase was capable of hydrolyzing a variety of natural fats and oils, and it was more active on lard and butter than on olive oil. The activity was stimulated by Ca²⁺, Mg²⁺, Mn²⁺ and inhibited by Cu²⁺, Hg²⁺ and Sn²⁺. It was not diminished but rather stimulated by a high concentration of bile-salts.     

Acidic lipase Lip I.3 from a Pseudomonas fluorescens‐like strain displays unusual properties and shows activity on secondary alcohols

Aims

Identification, cloning, expression and characterization of a novel lipase – Lip I.3 – from strain Pseudomonas CR‐611.

Methods and Results

The corresponding gene was identified and isolated by PCR‐amplification, cloned and expressed in Escherichia coli, and purified by refolding from inclusion bodies. Analysis of the deduced amino acid sequence revealed high homology with members of the bacterial lipase family I.3, showing 97% identity to a putative lipase from Pseudomonas fluorescens Pf0‐1, and 93% identity to a crystallized extracellular lipase from Pseudomonas sp. MIS38. A typical C‐terminal type I secretion signal and several putative Ca²⁺ binding sites were also identified. Experimental data confirmed that Lip I.3 requires Ca²⁺ ions for correct folding and activity. The enzyme differs from the previously reported family I.3 lipases in optimal pH, being the first acidophilic lipase reported in this family. Furthermore, Lip I.3 shows a strong preference for medium chain fatty acid esters and does not display interfacial activation. When tested for activity on secondary alcohol hydrolysis, Lip I.3 displayed higher efficiency on aromatic alcohols rather than on alkyl alcohols.

Conclusions

A new family I.3 lipase with unusual properties has been isolated, cloned and described. This will contribute to a better knowledge of family I.3 lipases, a family that has been scarcely explored, and that might provide a novel source of biocatalysts.

Significance and Impact of the Study

The unusual properties shown by Lip I.3 and the finding of activity and enantioselectivity on secondary alcohol esters may contribute to the development of new enzymatic tools for applied biocatalysis.     

Partial purification and characterization of lipase from Geobacillus stearothermophilus AH22

The lipase was partially purified by ion exchange chromatography and gel filtration column chromatography, and was characterized from Geobacillus stearothermophilus AH22 strain. The lipase was purified 18.3-folds with 19.7% recovery. The lipase activity was determined by using p-nitrophenyl esters (C₂–C₁₂) as substrates. The K_m values of the enzyme for these substrates were found as 0.16, 0.02, 0.19 and 0.55?mM, respectively, while V_max values were 0.52, 1.03, 0.72 and 0.15?U?mg^?1. The enzyme showed maximum activity at 50?°C and between pH 8.0 and 9.0. The enzyme was found to be quite stable at pH range of 4.0–10.0, and thermal stability between 50 and 60?°C. It was found that the best inhibitory effect of the enzyme activity was of Hg²⁺. The inhibitory effect as orlistat, catechin, propyl paraben, p-coumaric acid, 3,4-dihydroxy hydro-cinnamic acid was examined. These results suggest that G. stearothermophilus AH22 lipase presents very suitable properties for industrial applications.     

Isolation of a Novel Lipase Gene from <Emphasis Type="Italic">Serratia liquefaciens</Emphasis> S33 DB-1, Functional Expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its Properties

A new lipase gene designated as SlLipA was isolated from Serratia liquefaciens S33 DB-1 by the genomic-walking method. The cloned gene contained an open reading frame (ORF) of 1,845 bp encoding 615 amino acids with a conserved GXSXG motif. Genome sequence analysis showed that an aldo/keto reductase gene closed to the SlLipA gene. The lipase gene was cloned into the expression vector pPICZαA and successfully integrated into the heterologous host, methylotrophic yeast Pichia pastoris GS115. Five transformants could be expressed as secreted recombinant proteins with the high activity on Triglyceride–Agarose plate and as candidates to produce the recombinant enzyme. A C-terminal His tag was used for its purification. The lipase activity of different transformants against substrate para-nitrophenyl laurate (p-NPL) varied from 14 to 16 U ml⁻¹. For the substrates para-nitrophenyl caprate (p-NPC), p-NPL, para-nitrophenyl myristate (p-NPM), para-nitrophenyl palmitate (p-NPP), and para-nitrophenyl stearate (p-NPS), the specific activity was shown to be preferred to long acyl chain length of p-NPS.     

A molecular approach to optimize hIFN α2b expression and secretion in <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

In this work, we investigated the effect of codon bias and consensus sequence (CACA) at the translation initiation site on the expression level of heterologous proteins in Yarrowia lipolytica; human interferon alpha 2b (hIFN-α2b) was studied as an example. A codon optimized hIFN-α2b gene was synthesized according to the frequency of codon usage in Y. lipolytica. Both wild-type (IFN-wt) and optimized hIFN-α2b (IFN-op) genes were expressed under the control of a strong inducible promoter acyl-co-enzyme A oxidase (POX2). Protein secretion was directed by the targeting sequence of the extracellular lipase (LIP2): pre–proLIP2. Codon optimization increased protein production by 11-fold, whereas the insertion of CACA sequence upstream of the initiation codon of IFN-op construct resulted in 16.5-fold increase of the expression level; this indicates that translational efficiency plays an important part in the increase of hIFN-α2b production level. The replacement of the pre–proLIP2 signal secretion with the LIP2 pre-region sequence followed by the X-Ala/X-Pro stretch but without the pro-region also increased the secretion of the target protein by twofold, suggesting therefore that the LIP2 pro-region is not necessary for extracellular secretion of small heterologous proteins in Yarrowia lipolytica.     

Influence of cultivation conditions on the production of a thermostable extracellular lipase from Amycolatopsis mediterranei DSM 43304

Among several lipase-producing actinomycete strains screened, Amycolatopsis mediterranei DSM 43304 was found to produce a thermostable, extracellular lipase. Culture conditions and nutrient source modification studies involving carbon sources, nitrogen sources, incubation temperature and medium pH were carried out. Lipase activity of 1.37 ± 0.103 IU/ml of culture medium was obtained in 96 h at 28°C and pH 7.5 using linseed oil and fructose as carbon sources and a combination of phytone peptone and yeast extract (5:1) as nitrogen sources. Under optimal culture conditions, the lipase activity was enhanced 12-fold with a twofold increase in lipase specific activity. The lipase showed maximum activity at 60°C and pH 8.0. The enzyme was stable between pH 5.0 and 9.0 and temperatures up to 60°C. Lipase activity was significantly enhanced by Fe³⁺ and strongly inhibited by Hg²⁺. Li⁺, Mg²⁺ and PMSF significantly reduced lipase activity, whereas other metal ions and effectors had no significant effect at 0.01 M concentration. A. mediterranei DSM 43304 lipase exhibited remarkable stability in the presence of a wide range of organic solvents at 25% (v/v) concentration for 24 h. These features render this novel lipase attractive for potential biotechnological applications in organic synthesis reactions.