Input‐Output‐based Life Cycle Inventory

An input‐output‐based life cycle inventory (IO‐based LCI) is grounded on economic environmental input‐output analysis (IO analysis). It is a fast and low‐budget method for generating LCI data sets, and is used to close data gaps in life cycle assessment (LCA). Due to the fact that its methodological basis differs from that of process‐based inventory, its application in LCA is a matter of controversy. We developed a German IO‐based approach to derive IO‐based LCI data sets that is based on the German IO accounts and on the German environmental accounts, which provide data for the sector‐specific direct emissions of seven airborne compounds. The method to calculate German IO‐based LCI data sets for building products is explained in detail. The appropriateness of employing IO‐based LCI for German buildings is analyzed by using process‐based LCI data from the Swiss Ecoinvent database to validate the calculated IO‐based LCI data. The extent of the deviations between process‐based LCI and IO‐based LCI varies considerably for the airborne emissions we investigated. We carried out a systematic evaluation of the possible reasons for this deviation. This analysis shows that the sector‐specific effects (aggregation of sectors) and the quality of primary data for emissions from national inventory reporting (NIR) are the main reasons for the deviations. As a rule, IO‐based LCI data sets seem to underestimate specific emissions while overestimating sector‐specific aspects.     

From Life Cycle Assessment to Life Cycle Management

Life cycle assessment (LCA) is a widely accepted methodology to support decision‐making processes in which one compares alternatives, and that helps prevent shifting of environmental burdens along the value chain or among impact categories. According to regulation in the European Union (EU), the movement of waste needs to be reduced and, if unavoidable, the environmental gain from a specific waste treatment option requiring transport must be larger than the losses arising from transport. The EU explicitly recommends the use of LCA or life cycle thinking for the formulation of new waste management plans. In the last two revisions of the Industrial Waste Management Programme of Catalonia (PROGRIC), the use of a life cycle thinking approach to waste policy was mandated. In this article we explain the process developed to arrive at practical life cycle management (LCM) from what started as an LCA project. LCM principles we have labeled the “3/3” principle or the “good enough is best” principle were found to be essential to obtain simplified models that are easy to understand for legislators and industries, useful in waste management regulation, and, ultimately, feasible. In this article, we present the four models of options for the management of waste solvent to be addressed under Catalan industrial waste management regulation. All involved actors concluded that the models are sufficiently robust, are easy to apply, and accomplish the aim of limiting the transport of waste outside Catalonia, according to the principles of proximity and sufficiency.     

Life Cycle Inventory Analysis of the Wood Pallet Repair Process in the United States

This study developed gate‐to‐gate life cycle inventory (LCI) data for the repair of 48 by 40 inch (1,219 by 1,016 millimeter [mm]) stringer‐class wood pallets in the United States. Data were collected from seven wood pallet repair facilities. Approximately 1.98 FBM (foot, board measure) (4.67E‐03 cubic meters) of lumber were used for repairing each 48 by 40 inch (1,219 by 1,016 mm) stringer‐class wood pallet, the majority (97%) recovered from damaged pallets received by the pallet repair facilities. Repair equipment powered by electricity made the largest contribution to greenhouse gas (GHG) emissions. Steel nails used for the pallet repair had the largest contribution to GHG emissions among the material inputs, while use of recovered lumber yielded the largest GHG emissions credits. Overall, the repair process for a 48 by 40 inch (1,219 by 1,016 mm) stringer‐class wood pallet had GHG credits rather than a positive GHG emission due to the GHG offsets from co‐products.     

Effects of Distribution Choice on the Modeling of Life Cycle Inventory Uncertainty: An Assessment on the Ecoinvent v2.2 Database

Life cycle inventory data have multiple sources of uncertainty. These data uncertainties are often modeled using probability density functions, and in the ecoinvent database the lognormal distribution is used by default to model exchange uncertainty values. The aim of this article is to systematically measure the effect of this default distribution by changing from the lognormal to several other distribution functions and examining how this change affects the uncertainty of life cycle assessment results. Using the ecoinvent 2.2 inventory database, data uncertainty distributions are switched from the lognormal distribution to the normal, triangular, and gamma distributions. The effect of the distribution switching is assessed for both impact assessment results of individual products system, as well as comparisons between product systems. Impact assessment results are generated using 5,000 Monte Carlo iterations for each product system, using the Intergovernmental Panel on Climate Change (IPCC) 2001 (100‐year time frame) method. When comparing the lognormal distribution to the alternative default distributions, the difference in the resulting median and standard deviation values range from slight to significant, depending on the distributions used by default. However, the switch shows practically no effect on product system comparisons. Yet, impact assessment results are sensitive to how the data uncertainties are defined. In this article, we followed what we believe to be ecoinvent standard practice and preserved the “most representative” value. Practitioners should recognize that the most representative value can depart from the average of a probability distribution. Consistent default distribution choices are necessary when performing product system comparisons.     

Life Cycle Assessment Software: Selection Can Impact Results

When software is used to facilitate life cycle assessments (LCAs), the implicit assumption is that the results obtained are not a function of the choice of software used. LCAs were done in both SimaPro and GaBi for simplified systems of creation and disposal of 1 kilogram each of four basic materials (aluminum, corrugated board, glass, and polyethylene terephthalate) to determine whether there were significant differences in the results. Data files and impact assessment methodologies (Impact 2002, ReCiPe, and TRACI 2) were ostensibly identical (although there were minor variations in the available ReCiPe version between the programs that were investigated). Differences in reported impacts of greater than 20% for at least one of the four materials were found for 9 of the 15 categories in Impact 2002+, 7 of the 18 categories in ReCiPe, and four of the nine categories in TRACI. In some cases, these differences resulted in changes in the relative rankings of the four materials. The causes of the differences for 14 combinations of materials and impact categories were examined by tracing the results back to the life cycle inventory data and the characterization factors in the life cycle impact assessment (LCIA) methods. In all cases examined, a difference in the characterization factors used by the two programs was the cause of the differing results. As a result, when these software programs are used to inform choices, the result can be different conclusions about relative environmental preference that are functions purely of the software implementation of LCIA methods, rather than of the underlying data.     

The Role of Washing Machines in Life Cycle Assessment Studies

A key requirement for those in industry and elsewhere who wish to reduce the environmental impact of a product is to develop priorities for action. Life cycle assessment (LCA) is increasingly used to identify such priorities but can be misleading. This article draws attention to two effects that can occur when the system boundary for a product LCA is not defined correctly. We illustrate the "washing machine effect" by showing that in separate life cycle studies of clothing, detergents, and washing machines, the use of energy is dominated by operation of the washing machine. All three studies prioritize the use phase for action, but in an aggregated study, double counting of the use-phase impact occurs. We demonstrate the "inverse washing machine effect" with an example related to energy used in transport. We show that some activities that are significant on a cumulative basis consistently fall outside the chosen system boundary for individual products. A consequence is that when LCA studies are used for prioritization, they are in danger of overemphasizing the use-phase impacts and overlooking the impacts from indirect activities. These effects, which are broadly understood by LCA developers, appear not to be understood properly by those who use LCA to direct priorities for action. Therefore, practitioners should be wary of using LCA for prioritizing action, and LCA guidance documents should reflect this caution.     

Evaluation of Life Cycle Assessment Recycling Allocation Methods

Life cycle assessment practitioners struggle to accurately allocate environmental burdens of metals recycling, including the temporal dimension of environmental impacts. We analyze four approaches for calculating aluminum greenhouse gas emissions: the recycled content (RC) or cut‐off approach, which assumes that demand for recycled content displaces primary production; end‐of‐life recycling (EOLR), which assumes that postuse recycling displaces primary production; market‐based (MB) approaches, which estimate changes in supply and demand using price elasticities; and value‐corrected substitution (VCS), which allocates impact based on price differences between primary and recycled material. Our analysis suggests that applications of the VCS approach do not adequately account for the changing scrap to virgin material price ratio over time, whereas MB approaches do not address stock accumulation and depletion. The EOLR and RC approaches were analyzed using two case studies: U.S. aluminum beverage cans and vehicle engine blocks. These approaches produced similar results for beverage cans, which have a closed material loop system and a short product life. With longer product lifetimes, as noted with the engine blocks, the magnitude and timing of the emissions differs greatly between the RC and EOLR approaches. The EOLR approach indicates increased impacts at the time of production, offset by negative impacts in future years, whereas the RC approach assumes benefits to increased recycled content at the time of production. For vehicle engine blocks, emissions using EOLR are 140% higher than with RC. Results are highly sensitive to recycled content and future recycling rates, and the choice of allocation methods can have significant implications for life cycle studies.     

Implementing a Dynamic Life Cycle Assessment Methodology with a Case Study on Domestic Hot Water Production

This work contributes to the development of a dynamic life cycle assessment (DLCA) methodology by providing a methodological framework to link a dynamic system modeling method with a time‐dependent impact assessment method. This three‐step methodology starts by modeling systems where flows are described by temporal distributions. Then, a temporally differentiated life cycle inventory (TDLCI) is calculated to present the environmental exchanges through time. Finally, time‐dependent characterization factors are applied to the TDLCI to evaluate climate‐change impacts through time. The implementation of this new framework is illustrated by comparing systems producing domestic hot water (DHW) over an 80‐year period. Electricity is used to heat water in the first system, whereas the second system uses a combination of solar energy and gas to heat an equivalent amount of DHW at the same temperature. This comparison shows that using a different temporal precision (i.e., monthly vs. annual) to describe process flows can reverse conclusions regarding which case has the best environmental performance. Results also show that considering the timing of greenhouse gas (GHG) emissions reduces the absolute values of carbon footprint in the short‐term when compared with results from the static life cycle assessment. This pragmatic framework for the implementation of time in DLCA studies is proposed to help in the development of the methodology. It is not yet a fully operational scheme, and efforts are still required before DLCA can become state of practice.     

Life Cycle Assessment of Urban Wastewater Reclamation and Reuse Alternatives

Continuous population growth is causing increased water contamination. Uneven distribution of water resources and periodic droughts have forced governments to seek new water sources: reclaimed and desalinated water. Wastewater recovery is a tool for better management of the water resources that are diverted from the natural water cycle to the anthropic one. The main objective of this work is to assess the stages of operation of a Spanish Mediterranean wastewater treatment plant to identify the stages with the highest environmental impact, to establish the environmental loads associated with wastewater reuse, and to evaluate alternative final destinations for wastewater. Tertiary treatment does not represent a significant increment in the impact of the total treatment at the plant. The impact of reclaiming 1 cubic meter (m³) of wastewater represents 0.16 kilograms of carbon dioxide per cubic meter (kg CO₂/m³), compared to 0.83 kg CO₂/m³ associated with basic wastewater treatment (primary, secondary, and sludge treatment). From a comparison of the alternatives for wastewater final destination, we observe that replacing potable water means a freshwater savings of 1.1 m³, whereas replacing desalinated water means important energy savings, reflected in all of the indicators. To ensure the availability of potable water to all of the population—especially in areas where water is scarce—governments should promote reusing wastewater under safe conditions as much as possible.     

Exploring the Use of Ecological Footprint in Life Cycle Impact Assessment

Ecological footprint (EF) is a metric that estimates human consumption of biological resources and products, along with generation of waste greenhouse gas (GHG) emissions in terms of appropriated productive land. There is an opportunity to better characterize land occupation and effects on the carbon cycle in life cycle assessment (LCA) models using EF concepts. Both LCA and EF may benefit from the merging of approaches commonly used separately by practitioners of these two methods. However, few studies have compared or integrated EF with LCA. The focus of this research was to explore methods for improving the characterization of land occupation within LCA by considering the EF method, either as a complementary tool or impact assessment method. Biofuels provide an interesting subject for application of EF in the LCA context because two of the most important issues surrounding biofuels are land occupation (changes, availability, and so on) and GHG balances, two of the impacts that EF is able to capture. We apply EF to existing fuel LCA land occupation and emissions data and project EF for future scenarios for U.S. transportation fuels. We find that LCA studies can benefit from lessons learned in EF about appropriately modeling productive land occupation and facilitating clear communication of meaningful results, but find limitations to the EF in the LCA context that demand refinement and recommend that EF always be used along with other indicators and metrics in product‐level assessments.     

Life Cycle Assessment of ICT

The use of information and communication technology (ICT) is growing throughout society, and new products and solutions are developed at an increasing rate. To enable environmental assessment of specific ICT products and other products that rely on ICT in some way, a more complete, detailed, and up‐to‐date study based on real measurements is needed. To date, similar studies have not been readily available or fully comprehensive. This study assessed the overall operational electricity use and life‐cycle–based carbon footprint (CF) relating to ICT in Sweden, including activities not commonly addressed previously, such as shared data transport networks and data centers and manufacturing of network infrastructure. Specific, detailed inventory data are presented and used for assessment of the Internet Protocol core network, data transmission, operator activities, and access network. These specific data, in combination with secondary, more generic data for end‐user equipment, allow a comprehensive overall assessment. The majority of the ICT network CF is the result of end‐user equipment, mainly personal computers, followed by third‐party enterprise networks and data centers and then access networks. The parts closest to the user proved to be clearly responsible for the majority of the impact. The results are presented for Swedish ICT networks and for ICT networks in general based on a global average electricity mix.     

The Design of a Sustainability Assessment Standard Using Life Cycle Information

Sustainability assessment standards are currently being developed for a range of building products. This activity has been stimulated through the considerable success of the U.S. Green Building Council's (USGBC) LEED? standard. Transparent life cycle–based standards can guide manufacturers to design products that have reduced environmental impact. The use of a sustainability standard can certify performance and avoid green washing. In this article we present a logical framework for designing a sustainability assessment standard through the creation of tables that award points in the standard to be consistent with life cycle information. Certain minimum principles of consistency are articulated. In the case that the life cycle impact assessment method maps the life cycle inventory to impact through a linear weighting, two design approaches—impact category and activity substitution—are constructed to be consistent with these principles. The approach is illustrated in a case study of a partial redesign of a carpet sustainability assessment standard (NSF/ANSI‐140).     

A Step Towards a General Framework for Consequential Life Cycle Assessment

At the core of consequential life cycle assessment (CLCA) is a model of the economic system of which the activity that motivates the CLCA is a part. While there are several applications of CLCA in the literature, there does not appear to exist a formal, general mathematical framework. To address this gap, this article presents a general multi‐market equilibrium framework, which could be adapted to an arbitrary level of complexity depending on the context and data availability. A general expression for total pollution (of a given type) is derived, which highlights different factors that determine the impact on emissions. It is then illustrated how microeconomic theory can help predict the direction of price and quantity changes for each commodity within the modeled system simply based on an activity's relationship to the ultimate activity or service, which motivates the CLCA. The steps involved in converting the multi‐market framework to general equilibrium are also discussed.     

Life Cycle Assessment of Biomass‐based Combined Heat and Power Plants

Norway, like many countries, has realized the need to extensively plan its renewable energy future sooner rather than later. Combined heat and power (CHP) through gasification of forest residues is one technology that is expected to aid Norway in achieving a desired doubling of bioenergy production by 2020. To assess the environmental impacts to determine the most suitable CHP size, we performed a unit process‐based attributional life cycle assessment (LCA), in which we compared three scales of CHP over ten environmental impact categories—micro (0.1 megawatts electricity [MWe]), small (1 MWe), and medium (50 MWe) scale. The functional units used were 1 megajoule (MJ) of electricity and 1 MJ of district heating delivered to the end user (two functional units), and therefore, the environmental impacts from distribution of electricity and hot water to the consumer were also considered. This study focuses on a regional perspective situated in middle‐Norway's Nord‐ and Sør‐Trøndelag counties. Overall, the unit‐based environmental impacts between the scales of CHP were quite mixed and within the same magnitude. The results indicated that energy distribution from CHP plant to end user creates from less than 1% to nearly 90% of the total system impacts, depending on impact category and energy product. Also, an optimal small‐scale CHP plant may be the best environmental option. The CHP systems had a global warming potential ranging from 2.4 to 2.8 grams of carbon dioxide equivalent per megajoule of thermal (g CO₂‐eq/MJ_th) district heating and from 8.8 to 10.5 grams carbon dioxide equivalent per megajoule of electricity (g CO₂‐eq/MJ_el) to the end user.     

Environmental Life Cycle Assessment of a Canned Sardine Product from Portugal

This study aims to assess the environmental impacts of canned sardines in olive oil, by considering fishing, processing, and packaging, using life cycle assessment (LCA) methodology. The case study concerns a product of a canning factory based in Portugal and packed in aluminum cans. It is the first LCA of a processed seafood product made with the traditional canning method. The production of both cans and olive oil are the most important process in the considered impact categories. The production of olives contributes to the high environmental load of olive oil, related to cultivation and harvesting phases. The production of aluminum cans is the most significant process for all impact categories, except ozone depletion potential and eutrophication potential, resulting from the high energy demand and the extraction of raw materials. To compare to other sardine products consumed in Portugal, such as frozen and fresh sardines, transport to the wholesaler and store was added. The environmental cost of canned sardines is almost seven times higher per kilogram of edible product. The main action to optimize the environmental performance of canned sardines is therefore to replace the packaging and diminish the olive oil losses as much as possible. Greenhouse gas emissions are reduced by half when plastic packaging is considered rather than aluminum. Frozen and fresh sardines represent much lower environmental impacts than canned sardines. Nevertheless, when other sardine products are not possible, it becomes feasible to use sardines for human consumption, preventing them from being wasted or used suboptimally as feed.     

Analyzing the Practice of Life Cycle Assessment

Life cycle assessment (LCA) is a quantitative tool used to evaluate the environmental impacts of products or processes. With respect to buildings, LCA can be used to evaluate the environmental impacts of an entire building's life cycle. Currently LCA in the building area is used in a limited capacity, primarily to select building products. In order to determine the causality for the lack of whole‐building LCAs, focus groups with members of the architecture, engineering, and construction (AEC) communities were held. This article investigates the current level of knowledge of LCA in the AEC community and then discusses the benefits and barriers to the practice of LCA. In summary, the goal of the research was to identify why LCA is not used to its fullest potential in a whole‐building LCA. In an open forum and moderated setting, focus group participants were asked individually to self‐identify their experience with LCA, a brief education session on LCA was held, and then benefits and barriers to LCA were discussed. The focus group sessions were transcribed and systematically coded by social researchers in order to analyze the results. Hybrid flow and radar charts were developed. From the focus group results, the most important benefit to LCA was “provides information about environmental impacts.” The results did not identify a prominent barrier; however, building‐related metrics were ascertained to be one of the more crucial barriers. The benefits and barriers classified by this analysis will be utilized to develop a subsequent online survey to further understand the LCA and AEC community.     

Life Cycle Greenhouse Gas Emissions of Electricity Generated from Conventionally Produced Natural Gas

This research provides a systematic review and harmonization of the life cycle assessment (LCA) literature of electricity generated from conventionally produced natural gas. We focus on estimates of greenhouse gases (GHGs) emitted in the life cycle of electricity generation from natural gas‐fired combustion turbine (NGCT) and combined‐cycle (NGCC) systems. The smaller set of LCAs of liquefied natural gas power systems and natural gas plants with carbon capture and storage were also collected, but analyzed to a lesser extent. A meta‐analytical process we term “harmonization” was employed to align several system boundaries and technical performance parameters to better allow for cross‐study comparisons, with the aim of clarifying central tendency and reducing variability in estimates of life cycle GHG emissions. Of over 250 references identified, 42 passed screens for technological relevance and study quality, providing a total of 69 estimates for NGCT and NGCC. Harmonization increased the median estimates in each category as a result of several factors not typically considered in the previous research, including the regular clearing of liquids from a well, and consolidated the interquartile range for NGCC to 420 to 480 grams of carbon dioxide equivalent per kilowatt‐hour (g CO₂‐eq/kWh) and for NGCT to 570 to 750 g CO₂‐eq/kWh, with medians of 450 and 670 CO₂‐eq/kWh, respectively. Harmonization of thermal efficiency had the largest effect in reducing variability; methane leakage rate is likely similarly influential, but was unharmonized in this assessment as a result of the significant current uncertainties in its estimation, an area that is justifiably receiving significant research attention.     

Environmental Life Cycle Costing and Sustainability: Insights from Pollution Abatement and Resource Recovery in Wastewater Treatment

The relationship between environmental life cycle costing (ELCC) and sustainability was explored using two detailed wastewater case studies. The case studies were selected to increase the tension between existing market values and values for sustainability; the first case study considered incremental change to an existing plant and the second considered a paradigm shift in wastewater treatment. Pollution control provided the greatest cost savings for the first case study and provided a “win‐win” result—meeting existing standards and saving money. However, benefits for pollution control beyond current standards were not captured, which emphasized the role of standards to internalize as well as limit the values considered in ELCC. In the second case study, the value of water had the potential to change the focus of wastewater design from pollution abatement to resource recovery. However, social acceptance of recovered water and market access for resources created large risk for investment. The ELCC was also sensitive to the discount rate which limited longer‐term considerations. Other sustainability values such as scarcity and ecological thresholds were not captured. The ELCC code of practice suggests including such costs if likely in the foreseeable future; defining these values may also clarify the role of ELCC to evaluate sustainability over the life cycle.     

Consequential Life Cycle Assessment of Policy Vulnerability to Price Effects

The application of life cycle assessment (LCA) in a policy context highlights the need for a “consequential” LCA (CLCA), which differs from an “attributional” LCA (ALCA). Although CLCA offers some advantages over ALCA, such as a capacity to account for emissions resulting from both substitution and price effects, it entails additional assumptions and cost and may yield estimates that are more uncertain (e.g., estimates of impact of biofuel policies on greenhouse gas [GHG] emissions). We illustrate how a CLCA that relies on simple partial equilibrium models could provide important insights on the direction and magnitude of price effects while limiting the complexity of CLCA. We describe how such a CLCA, when applied early in the policy life cycle, could help identify policy formulations that reduce the magnitude of adverse price effects relative to the beneficial substitution effect on emissions because—as the experience with biofuel regulations indicates—regulating price effects is costly and controversial. We conclude that the salient contribution of CLCA in the policy process might lie in warning policy makers about the vulnerabilities in a policy with regard to environmental impact and to help modify potentially counterproductive formulations rather than in deriving the precise estimates for uncertain variables, such as the life cycle GHG intensity of product or average indirect emissions.     

Environmental Impact Assessment of Wood Use in Japan through 2050 Using Material Flow Analysis and Life Cycle Assessment

In this study, we used material flow analysis and life cycle assessment to quantify the environmental impacts and impact reductions related to wood consumption in Japan from 1970 to 2013. We then conducted future projections of the impacts and reductions until 2050 based on multiple future scenarios of domestic forestry, wood, and energy use. An impact assessment method involving characterization, damage assessment, and integration with a monetary unit was used, and the results were expressed in Japanese yen (JPY). We found that environmental impacts from paper consumption, such as climate change and urban air pollution, were significant and accounted for 56% to 83% of the total environmental impacts between 1970 and 2013. Therefore, reductions of greenhouse gas, nitrogen oxide, and sulfur oxide emissions from paper production would be an effective measure to reduce the overall environmental impacts. An increase in wood use for building construction, civil engineering, furniture materials, and energy production could lead to reductions of environmental impacts (via carbon storage, material substitution, and fuel substitution) amounting to 357 billion JPY in 2050, which is equivalent to 168% of the 2013 levels. Particularly, substitution of nonwooden materials, such as cement, concrete, and steel, with wood products in building construction could significantly contribute to impact reductions. Although an increase of wood consumption could reduce environmental impacts, such as climate change, resource consumption, and urban air pollution, increased wood consumption would also be associated with land‐use impacts. Therefore, minimizing land transformations from forest to barren land will be important.