Understanding the future of lithium: Part 2, temporally and spatially resolved life‐cycle assessment modeling

An array of emerging technologies, from electric vehicles to renewable energy systems, relies on large‐format lithium ion batteries (LIBs). LIBs are a critical enabler of clean energy technologies commonly associated with air pollution and greenhouse gas mitigation strategies. However, LIBs require lithium, and expanding the supply of lithium requires new lithium production capacity, which, in turn, changes the environmental impacts associated with lithium production since different resource types and ore qualities will be exploited. A question of interest is whether this will lead to significant changes in the environmental impacts of primary lithium over time. Part one of this two‐part article series describes the development of a novel resource production model that predicts future lithium demand and production characteristics (e.g., timing, location, and ore type). In this article, part two, the forecast is coupled with anticipatory life‐cycle assessment (LCA) modeling to estimate the environmental impacts of producing battery‐grade lithium carbonate equivalent (LCE) each year between 2018 and 2100. The result is a normalized life‐cycle impact intensity for LCE that reflects the changing resource type, quantity, and region of production. Sustained growth in lithium demands through 2100 necessitates extraction of lower grade resources and mineral deposits, especially after 2050. Despite the reliance on lower grade resources and differences in impact intensity for LCE production from each deposit, the LCA results show only small to modest increases in impact, for example, carbon intensity increases from 3.2 kg CO₂e/kg LCE in 2020 to 3.3 kg CO₂e/kg LCE in 2100.     

Plastic pollution in croplands threatens long‐term food security

Plastic pollution is a global concern given its prevalence in aquatic and terrestrial ecosystems. Studies have been conducted on the distribution and impact of plastic pollution in marine ecosystems, but little is known on terrestrial ecosystems. Plastic mulch has been widely used to increase crop yields worldwide, yet the impact of plastic residues in cropland soils to soil health and crop production in the long term remained unclear. In this paper, using a global meta‐analysis, we found that the use of plastic mulch can indeed increase crop yields on average by 25%–42% in the immediate season due to the increase of soil temperature (+8%) and moisture (+17%). However, the unabated accumulation of film residues in the field negatively impacts its physicochemical properties linked to healthy soil and threatens food production in the long term. It has multiple negative impacts on plant growth including crop yield (at the mean rate of ?3% for every additional 100 kg/ha of film residue), plant height (?2%) and root weight (?5%), and soil properties including soil water evaporation capacity (?2%), soil water infiltration rate (?8%), soil organic matter (?0.8%) and soil available phosphorus (?5%) based on meta‐regression. Using a nationwide field survey of China, the largest user of plastic mulch worldwide, we found that plastic residue accumulation in cropland soils has reached 550,800 tonnes, with an estimated 6%–10% reduction in cotton yield in some polluted sites based on current level of plastic residue content. Immediate actions should be taken to ensure the recovery of plastic film mulch and limit further increase in film residue loading to maintain the sustainability of these croplands.     

Global‐scale impacts of nitrogen deposition on tree carbon sequestration in tropical,temperate, and boreal forests: A meta‐analysis

Elevated nitrogen (N) deposition may increase net primary productivity in N‐limited terrestrial ecosystems and thus enhance the terrestrial carbon (C) sink. To assess the magnitude of this N‐induced C sink, we performed a meta‐analysis on data from forest fertilization experiments to estimate N‐induced C sequestration in aboveground tree woody biomass, a stable C pool with long turnover times. Our results show that boreal and temperate forests responded strongly to N addition and sequestered on average an additional 14 and 13 kg C per kg N in aboveground woody biomass, respectively. Tropical forests, however, did not respond significantly to N addition. The common hypothesis that tropical forests do not respond to N because they are phosphorus‐limited could not be confirmed, as we found no significant response to phosphorus addition in tropical forests. Across climate zones, we found that young forests responded more strongly to N addition, which is important as many previous meta‐analyses of N addition experiments rely heavily on data from experiments on seedlings and young trees. Furthermore, the C–N response (defined as additional mass unit of C sequestered per additional mass unit of N addition) was affected by forest productivity, experimental N addition rate, and rate of ambient N deposition. The estimated C–N responses from our meta‐analysis were generally lower that those derived with stoichiometric scaling, dynamic global vegetation models, and forest growth inventories along N deposition gradients. We estimated N‐induced global C sequestration in tree aboveground woody biomass by multiplying the C–N responses obtained from the meta‐analysis with N deposition estimates per biome. We thus derived an N‐induced global C sink of about 177 (112–243) Tg C/year in aboveground and belowground woody biomass, which would account for about 12% of the forest biomass C sink (1,400 Tg C/year).     

The CO2‐equivalent balance of freshwater ecosystems is non‐linearly related to productivity

Eutrophication of fresh waters results in increased CO₂ uptake by primary production, but at the same time increased emissions of CH₄ to the atmosphere. Given the contrasting effects of CO₂ uptake and CH₄ release, the net effect of eutrophication on the CO₂‐equivalent balance of fresh waters is not clear. We measured carbon fluxes (CO₂ and CH₄ diffusion, CH₄ ebullition) and CH₄ oxidation in 20 freshwater mesocosms with 10 different nutrient concentrations (total phosphorus range: mesotrophic 39 µg/L until hypereutrophic 939 µg/L) and planktivorous fish in half of them. We found that the CO₂‐equivalent balance had a U‐shaped relationship with productivity, up to a threshold in hypereutrophic systems. CO₂‐equivalent sinks were confined to a narrow range of net ecosystem production (NEP) between 5 and 19 mmol O₂ m^?3 day^?1. Our findings indicate that eutrophication can shift fresh waters from sources to sinks of CO₂‐equivalents due to enhanced CO₂ uptake, but continued eutrophication enhances CH₄ emission and transforms freshwater ecosystems to net sources of CO₂‐equivalents to the atmosphere. Nutrient enrichment but also planktivorous fish presence increased productivity, thereby regulating the resulting CO₂‐equivalent balance. Increasing planktivorous fish abundance, often concomitant with eutrophication, will consequently likely affect the CO₂‐equivalent balance of fresh waters.     

Insights on the Use of Hybrid Life Cycle Assessment for Environmental Footprinting

Establishing a comprehensive environmental footprint that indicates resource use and environmental release hotspots in both direct and indirect operations can help companies formulate impact reduction strategies as part of overall sustainability efforts. Life cycle assessment (LCA) is a useful approach for achieving these objectives. For most companies, financial data are more readily available than material and energy quantities, which suggests a hybrid LCA approach that emphasizes use of economic input‐output (EIO) LCA and process‐based energy and material flow models to frame and develop life cycle emission inventories resulting from company activities. We apply a hybrid LCA framework to an inland marine transportation company that transports bulk commodities within the United States. The analysis focuses on global warming potential, acidification, particulate matter emissions, eutrophication, ozone depletion, and water use. The results show that emissions of greenhouse gases, sulfur, and particulate matter are mainly from direct activities but that supply chain impacts are also significant, particularly in terms of water use. Hotspots were identified in the production, distribution, and use of fuel; the manufacturing, maintenance, and repair of boats and barges; food production; personnel air transport; and solid waste disposal. Results from the case study demonstrate that the aforementioned footprinting framework can provide a sufficiently reliable and comprehensive baseline for a company to formulate, measure, and monitor its efforts to reduce environmental impacts from internal and supply chain operations.     

Quantifying environmental impacts of primary aluminum ingot production and consumption : A trade‐linked multilevel life cycle assessment

Aluminum is one of the most used metals of modern civilization, but its production is responsible for multiple adverse environmental impacts mostly due to aluminum smelting and alumina refining. Previous life cycle assessments (LCAs) have aggregated alumina refining into a single global process even though refining processes are highly spatially differentiated and alumina is highly traded. Our work improves on existing LCAs of primary aluminum by including temporal and spatial differentiation in alumina refining and aluminum smelting and trade of alumina and primary aluminum ingots. We build country‐level impact factors for primary aluminum ingot production and consumption, with the spatial distributions of environmental impacts, from 2000 to 2017, by combining a trade‐linked multilevel material flow analysis with LCA using six midpoint categories of the ReCiPe method. Climate change impacts of primary aluminum production range from 4.5 to 33.6 kg CO₂ eq./kg. We then estimate the life cycle production‐ and consumption‐based environmental burdens of primary aluminum ingot by country. High spatial variations exist among impact factors of primary aluminum production. Aggregating the alumina refining processes into a single process may cause important deviations on the impact factors of primary aluminum ingot production (up to 38% differences in climate change impacts). Finally, we estimate the climate change impacts of worldwide primary aluminum production at 1.2 Gt CO₂ eq. in 2017 and untangle their spatial origins, localized at 70% in China. Overall, we show the importance of spatial differentiation for highly traded products that rely on highly traded inputs and offer recommendations for LCA practitioners. This article met the requirements for a gold‐gold JIE data openness badge described at http://jie.click/badges .     

Elaboration of an algae‐to‐energy system and recovery of water and nutrients from municipal sewage

Increasing pressure is being exerted on the peri‐urban space that has elevated the demand for electricity, affects the global water resource, and impacts the potential to produce food, fiber, and commodity products. Algae‐based technologies and in particular algae‐based sewage treatment provides an opportunity for recovery of water for recycle and re‐use, sequestration of greenhouse gases, and generation of biomass. Successful coupling of municipal sewage treatment to an algae‐to‐energy facility depends largely on location, solar irradiance, and temperature to achieve meaningful value recovery. In this paper, an algae‐to‐energy sewage treatment system for implementation in southern Africa is elaborated. Using results from the continued operation of an integrated algal pond system (IAPS), it is shown that this 500‐person equivalent system generates 75 kL per day water for recycle and re‐use and, ～9 kg per day biomass that can be converted to methane with a net energy yield of ～150 MJ per day, and ～0.5 kL per day of high nitrogen‐containing liquid effluent (>1 g/L) with potential for use as organic fertilizer. It is this opportunity that IAPS‐based algae‐to‐energy sewage treatment provides for meaningful energy and co‐product recovery within the peri‐urban space and, which can alleviate pressure on an already strained water–energy–food nexus.     

Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study

Three‐dimensional (3D) printing and geo‐polymers are two environmentally oriented innovations in concrete manufacturing. The 3D printing of concrete components aims to reduce raw material consumption and waste generation. Geo‐polymer is being developed to replace ordinary Portland cement and reduce the carbon footprint of the binder in the concrete. The environmental performance of the combined use of the two innovations is evaluated through an ex‐ante life cycle assessment (LCA). First, an attributional LCA was implemented, using data collected from the manufacturer to identify the hotspots for environmental improvements. Then, scaled‐up scenarios were built in collaboration with the company stakeholder. These scenarios were compared with the existing production system to understand the potential advantages/disadvantages of the innovative system and to identify the potential directions for improvement. The results indicate that 3D printing can potentially lead to waste reduction. However, depending on its recipe, geo‐polymer likely has higher environmental impacts than ordinary concrete. The ex‐ante LCA suggests that after step‐by‐step improvements in the production and transportation of raw materials, 3D printing geo‐polymer concrete is able to reduce the carbon footprint of concrete components, while it does still perform worse on impact categories, such as depletion of abiotic resources and stratospheric ozone depletion. We found that the most effective way to lower the environmental impacts of 3D concrete is to reduce silicate in the recipe of the geo‐polymer. This approach is, however, challenging to realize by the company due to the locked‐in effect of the previous innovation investment. The case study shows that to support technological innovation ex‐ante LCA has to be implemented as early as possible in innovation to allow for maintaining technical flexibility and improving on the identified hotspots.     

Including albedo in time‐dependent LCA of bioenergy

Albedo change during feedstock production can substantially alter the life cycle climate impact of bioenergy. Life cycle assessment (LCA) studies have compared the effects of albedo and greenhouse gases (GHGs) based on global warming potential (GWP). However, using GWP leads to unequal weighting of climate forcers that act on different timescales. In this study, albedo was included in the time‐dependent LCA, which accounts for the timing of emissions and their impacts. We employed field‐measured albedo and life cycle emissions data along with time‐dependent models of radiative transfer, biogenic carbon fluxes and nitrous oxide emissions from soil. Climate impacts were expressed as global mean surface temperature change over time (?T) and as GWP. The bioenergy system analysed was heat and power production from short‐rotation willow grown on former fallow land in Sweden. We found a net cooling effect in terms of ?T per hectare (?3.8 × 10^–11 K in year 100) and GWP₁₀₀ per MJ fuel (?12.2 g CO₂e), as a result of soil carbon sequestration via high inputs of carbon from willow roots and litter. Albedo was higher under willow than fallow, contributing to the cooling effect and accounting for 34% of GWP₁₀₀, 36% of ?T in year 50 and 6% of ?T in year 100. Albedo dominated the short‐term temperature response (10–20 years) but became, in relative terms, less important over time, owing to accumulation of soil carbon under sustained production and the longer perturbation lifetime of GHGs. The timing of impacts was explicit with ?T, which improves the relevance of LCA results to climate targets. Our method can be used to quantify the first‐order radiative effect of albedo change on the global climate and relate it to the climate impact of GHG emissions in LCA of bioenergy, alternative energy sources or land uses.     

Life Cycle Assessment of a Lithium‐Ion Battery Vehicle Pack

Electric vehicles (EVs) have no tailpipe emissions, but the production of their batteries leads to environmental burdens. In order to avoid problem shifting, a life cycle perspective should be applied in the environmental assessment of traction batteries. The aim of this study was to provide a transparent inventory for a lithium‐ion nickel‐cobalt‐manganese traction battery based on primary data and to report its cradle‐to‐gate impacts. The study was carried out as a process‐based attributional life cycle assessment. The environmental impacts were analyzed using midpoint indicators. The global warming potential of the 26.6 kilowatt‐hour (kWh), 253‐kilogram battery pack was found to be 4.6 tonnes of carbon dioxide equivalents. Regardless of impact category, the production impacts of the battery were caused mainly by the production chains of battery cell manufacture, positive electrode paste, and negative current collector. The robustness of the study was tested through sensitivity analysis, and results were compared with preceding studies. Sensitivity analysis indicated that the most effective approach to reducing climate change emissions would be to produce the battery cells with electricity from a cleaner energy mix. On a per‐kWh basis, cradle‐to‐gate greenhouse gas emissions of the battery were within the range of those reported in preceding studies. Contribution and structural path analysis allowed for identification of the most impact‐intensive processes and value chains. This article provides an inventory based mainly on primary data, which can easily be adapted to subsequent EV studies, and offers an improved understanding of environmental burdens pertaining to lithium‐ion traction batteries.     

The Wheat 660K SNP array demonstrates great potential for marker‐assisted selection in polyploid wheat

The rapid development and application of molecular marker assays have facilitated genomic selection and genome‐wide linkage and association studies in wheat breeding. Although PCR‐based markers (e.g. simple sequence repeats and functional markers) and genotyping by sequencing have contributed greatly to gene discovery and marker‐assisted selection, the release of a more accurate and complete bread wheat reference genome has resulted in the design of single‐nucleotide polymorphism (SNP) arrays based on different densities or application targets. Here, we evaluated seven types of wheat SNP arrays in terms of their SNP number, distribution, density, associated genes, heterozygosity and application. The results suggested that the Wheat 660K SNP array contained the highest percentage (99.05%) of genome‐specific SNPs with reliable physical positions. SNP density analysis indicated that the SNPs were almost evenly distributed across the whole genome. In addition, 229 266 SNPs in the Wheat 660K SNP array were located in 66 834 annotated gene or promoter intervals. The annotated genes revealed by the Wheat 660K SNP array almost covered all genes revealed by the Wheat 35K (97.44%), 55K (99.73%), 90K (86.9%) and 820K (85.3%) SNP arrays. Therefore, the Wheat 660K SNP array could act as a substitute for other 6 arrays and shows promise for a wide range of possible applications. In summary, the Wheat 660K SNP array is reliable and cost‐effective and may be the best choice for targeted genotyping and marker‐assisted selection in wheat genetic improvement.     

Soil carbon stock change following afforestation in Northern Europe: a meta‐analysis

Northern Europe supports large soil organic carbon (SOC) pools and has been subjected to high frequency of land‐use changes during the past decades. However, this region has not been well represented in previous large‐scale syntheses of land‐use change effects on SOC, especially regarding effects of afforestation. Therefore, we conducted a meta‐analysis of SOC stock change following afforestation in Northern Europe. Response ratios were calculated for forest floors and mineral soils (0–10 cm and 0–20/30 cm layers) based on paired control (former land use) and afforested plots. We analyzed the influence of forest age, former land‐use, forest type, and soil textural class. Three major improvements were incorporated in the meta‐analysis: analysis of major interaction groups, evaluation of the influence of nonindependence between samples according to study design, and mass correction. Former land use was a major factor contributing to changes in SOC after afforestation. In former croplands, SOC change differed between soil layers and was significantly positive (20%) in the 0–10 cm layer. Afforestation of former grasslands had a small negative (nonsignificant) effect indicating limited SOC change following this land‐use change within the region. Forest floors enhanced the positive effects of afforestation on SOC, especially with conifers. Meta‐estimates calculated for the periods <30 years and >30 years since afforestation revealed a shift from initial loss to later gain of SOC. The interaction group analysis indicated that meta‐estimates in former land‐use, forest type, and soil textural class alone were either offset or enhanced when confounding effects among variable classes were considered. Furthermore, effect sizes were slightly overestimated if sample dependence was not accounted for and if no mass correction was performed. We conclude that significant SOC sequestration in Northern Europe occurs after afforestation of croplands and not grasslands, and changes are small within a 30‐year perspective.     

Animal manure application and soil organic carbon stocks: a meta‐analysis

The impact of animal manure application on soil organic carbon (SOC) stock changes is of interest for both agronomic and environmental purposes. There is a specific need to quantify SOC change for use in national greenhouse gas (GHG) emission inventories. We quantified the response of SOC stocks to manure application from a large worldwide pool of individual studies and determined the impact of explanatory factors such as climate, soil properties, land use and manure characteristics. Our study is based on a meta‐analysis of 42 research articles totaling 49 sites and 130 observations in the world. A dominant effect of cumulative manure‐C input on SOC response was observed as this factor explained at least 53% of the variability in SOC stock differences compared to mineral fertilized or unfertilized reference treatments. However, the effects of other determining factors were not evident from our data set. From the linear regression relating cumulative C inputs and SOC stock difference, a global manure‐C retention coefficient of 12% ± 4 (95% Confidence Interval, CI) could be estimated for an average study duration of 18 years. Following an approach comparable to the Intergovernmental Panel on Climate Change, we estimated a relative SOC change factor of 1.26 ± 0.14 (95% CI) which was also related to cumulative manure‐C input. Our results offer some scope for the refinement of manure retention coefficients used in crop management guidelines and for the improvement of SOC change factors for national GHG inventories by taking into account manure‐C input. Finally, this study emphasizes the need to further document the long‐term impact of manure characteristics such as animal species, especially pig and poultry, and manure management systems, in particular liquid vs. solid storage.     

Life cycle assessment of recirculating aquaculture systems: A case of Atlantic salmon farming in China

Recirculating aquaculture systems (RAS) are an alternative technology to tackle the major environmental challenges associated with conventional cage culture systems. In order to systematically assess the environmental performance of RAS farming, it is important to take the whole life cycle into account so as to avoid ad hoc and suboptimal environmental measures. So far, the application of life cycle assessment (LCA) in aquaculture, especially to indoor RAS, is still in progress. This study reports on an LCA of Atlantic salmon harvested at an indoor RAS farm in northern China. Results showed that 1 tonne live‐weight salmon production required 7,509 kWh farm‐level electricity and generated 16.7 tonnes of CO₂ equivalent (eq), 106 kg of SO₂ eq, 2.4 kg of P eq, and 108 kg of N eq (cradle‐to‐farm gate). In particular, farm‐level electricity use and feed product were identified as primary contributors to eight of nine impact categories assessed (54–95% in total), except the potential marine eutrophication (MEU) impact (dominated by the grow‐out effluents). Among feed ingredients (on a dry‐weight basis), chicken meal (5%) and krill meal (8%) dominated six and three, respectively, of the nine impact categories. Suggested environmental improvement measures for this indoor RAS farm included optimization of stocking density, feeding management, grow‐out effluent treatment, substitution of feed ingredients, and selection of electricity generation sources. In a generic context, this study can contribute to a better understanding of the life cycle environmental impacts of land‐based salmon RAS operations, as well as science‐based communication among stakeholders on more eco‐friendly farmed salmon.     

A Methodical Approach for Systematic Life Cycle Assessment of Wood‐Based Furniture

Existing life cycle assessment (LCA) studies for furniture focus on single pieces of furniture and use a bottom‐up approach based on their bill of materials (BOM) to build up the data inventories. This approach does not ensure completeness regarding material and energy fluxes and representativeness regarding the product portfolio. Integrating material and energy fluxes collected at company level into product LCA (top‐down approach) over‐rides this drawback. This article presents a method for systematic LCA of industrially produced furniture that merges the top‐down approach and bottom‐up approach. The developed method assigns data collected at the company level to the different products while, at the same time, considering that wood‐based furniture is a complex product. Hence, several classifications to reduce the complexity to a manageable level have been developed. Simultaneously, a systematic calculation routine was established. The practical implementation of the developed method for systematic LCA is carried out in a case study within the German furniture industry. The system boundary was set in accord with the EN 15804 specification cradle‐to‐gate‐with‐options. The analysis therefore includes the manufacturing phase supplemented by an end‐of‐life scenario. The case study shows that the manufacturing of semifinished products (especially wood‐based panels and metal components) as well as the electric energy demand in furniture manufacturing account for a notable share of the environmental impacts. A sensitivity analysis indicates that up to roughly 10% of the greenhouse gas emissions are not recorded when conducting an LCA based on a BOM instead of applying the developed approach.     

The effect of fertilizer‐N on the inter‐specific competition among three wheat aphids under elevated CO2

Increasing atmospheric carbon dioxide (ab. CO₂) and fertilizer‐nitrogen (ab. N) applications may have marked direct effects on the plant growth of agricultural crops, and in turn affect the higher trophic level of insect herbivores. In this study, the effects of elevated CO₂ (i.e., 650 µl/L vs. ambient 400 µl/L) and fertilizer‐N (0, 50, 100, 200 kg/ha) on the population abundances and the inter‐specific competition among three co‐occurring species of wheat aphids, Sitobion avenae, Rhopalosiphum padi and Schizaphis graminum, were studied. The grain weight per ear and the 1,000‐grain weight were generally increased when grown under elevated CO₂ and showed a significant effect at the 100 kg/ha (grain weight per ear) and 0, 50 and 100 kg/ha (1,000‐grain weight) N. These two yield indexes increased with increasing fertilizer‐N levels within reasonable limits and reached a maximum at 100 kg/ha. Elevated CO₂ combined with fertilizer‐N levels formed complex indirect effects on the three wheat aphids through the wheat crops they fed on. Elevated CO₂ significantly decreased the niche overlap index (ab. NOI) between S. avenae and R. padi under 0 and 100 kg/ha and that between R. padi and S. graminum under 0 kg/ha, while significantly increased the three NOIs under 50 kg/ha and that between R. padi and S. graminum under 100 and 200 kg/ha. S. avenae and R. padi had the larger population and stronger competition in low‐N condition (0 and 50 kg/ha), which was harmful to wheat yield and quality when combined with its own poor nutrition. Overall, the 100 kg/ha N level was the best option based on the aphid population, competition and wheat yields. Therefore, the balanced relationship formed among fertilizers, plants and insects under 100 kg/ha N was vital for the interactive ecosystem.     

Environmental impacts of future bioenergy pathways: the case of electricity from wheat straw bales and pellets

This study presents the life cycle assessment of electricity generation from straw bales and pellets. Straw is the most abundant biomass residue in Europe and its use for energy purposes is promoted on the premise of high greenhouse gas savings. This assumption has delayed the study of sustainability of straw‐fired systems on a broader sense and the literature on the topic is almost absent. This study uses data from specific literature and emissions inventories to model a number of straw pathways. The plant modeled is a medium‐scale straw‐fired power plant of 50 MWth capacity. The results show that electricity from straw‐fired power plants can indeed realize high greenhouse gas savings compared both with existing coal plants and with the European electricity mix. The savings are in the range 70–94%. The influence of the geographical origin of straw is analyzed by using datasets for the cultivation of wheat in five different European countries. The highest emissions are recorded for the case of straw from Spain due to the small yields, whereas cultivation processes in United Kingdom and the Netherlands show high environmental impacts due to the high level of fertilization. Other environmental impacts are evaluated, such as acidification potential, eutrophication, particulate matter emissions, and photochemical ozone formation. The bioenergy system scores worse than the current European electricity mix for all the categories. However, it is important to notice that in Spain and United Kingdom the straw system shows lower impacts compared with the local average coal electricity. Finally, the study investigates the ‘break‐even’ distance at which the higher emissions from the pellets production are paid off by the saved emissions in their transport compared with the bales. The results show that no reasonable break‐even distance exists for road transport, whereas advantages for pellets are evident in any configuration for transoceanic transport.     

Food and bioenergy: reviewing the potential of dual‐purpose wheat crops

Within the bioenergy debate, the ‘food vs. fuel’ controversy quickly replaced enthusiasm for biofuels derived from first‐generation feedstocks. Second‐generation biofuels offer an opportunity to produce fuels from dedicated energy crops, waste materials or coproducts such as cereal straw. Wheat represents one of the most widely grown arable crops around the world, with wheat straw, a potential source of biofuel feedstock. Wheat straw currently has limited economic value; hence, wheat cultivars have been bred for increased grain yield; however, with the development of second‐generation biofuel production, utilization of straw biomass provides the potential for ‘food and fuel’. Reviewing the evidence for the development of dual‐purpose wheat cultivars optimized for food grain and straw biomass production, we present a holistic assessment of a potential ideotype for a dual‐purpose cultivar (DPC). An ideal DPC would be characterized by high grain and straw yields, high straw digestibility (i.e. biofuel yield potential) and good lodging resistance. Considerable variation in these traits exists among current wheat cultivars, facilitating the selection of improved individual traits; however, increasing straw yield and digestibility could potentially have negative trade‐off impacts on grain yield and lodging resistance, reducing the feasibility of a single ideotype. Adoption of alternative management practices could potentially increase straw yield and digestibility, albeit these practices are also associated with potential trade‐offs among cultivar traits. Benefits from using DPCs include reduced logistics costs along the biofuel feedstock supply chain, but practical barriers to differential pricing for straw digestibility traits are likely to reduce the financial incentive to farmers for growing higher ‘biofuel‐quality’ straw cultivars. Further research is required to explore the relationships among the ideotype traits to quantify potential DPC benefits; this will help to determine whether stakeholders along the bioenergy feedstock supply chain will invest in the development of DPCs that provide food and fuel potential.