The FLP protein of the 2-micron plasmid of yeast. Inter- and intramolecular reactions

We have studied the mechanism of reaction of the FLP protein of the yeast 2-micron plasmid on linear substrates. The products of the reaction are dependent upon the concentration of FLP protein. At low concentrations of FLP, products resulting from intramolecular recombination between two FLP target sites accumulate. At higher concentrations of FLP, intermolecular recombination results in the accumulation of products which are larger than the starting substrate. At higher concentrations still, FLP-promoted recombination is inhibited. Potassium chloride (0.15 M) inhibits the intermolecular reaction and also prevents the inhibition of FLP-mediated recombination caused by high concentrations of FLP protein. We present a model that explains these findings.     

The FLP protein of the 2-micron plasmid of yeast. Purification of the protein from Escherichia coli cells expressing the cloned FLP gene

Most laboratory strains of the yeast Saccharomyces cerevisiae contain many copies of an autonomously replicating plasmid called 2-micron circle DNA. This plasmid codes for a site-specific recombinase, the FLP protein which promotes recombination across two 599-base pair inverted repeats of the plasmid DNA. We have cloned the FLP gene under the control of a strong Escherichia coli promoter and have hyperproduced the protein in that organism. Cell-free extracts from this source promote highly efficient site-specific recombination in vitro and we have used this activity to purify the FLP protein substantially. The enzyme acts efficiently on circular and linear substrates and requires only monovalent or divalent cations for activity.     

FLP site-specific recombinase of yeast 2-micron plasmid. Topological features of the reaction

The 2-micron plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombinase (FLP) that promotes inversion across a unique site contained in each of the 599-base-pair inverted repeats of the plasmid. We have studied the topological changes generated in supercoiled substrates after exposure to the purified FLP protein in vitro. When a supercoiled substrate bearing two FLP target sequences in inverse orientation is treated with FLP, the products are multiply knotted structures that arise as a result of random entrapment of interdomainal supercoils. Likewise, a supercoiled substrate bearing two target sequences in direct orientation yields multiply interlocked catenanes as the product. Both types of substrate seem to be able to undergo repeated rounds of recombination that result in products of further complexity. The FLP protein also acts as a site-specific topoisomerase during the recombination reaction.     

FLP protein of 2 mu circle plasmid of yeast induces multiple bends in the FLP recognition target site

The FLP recombinase of the 2 mu plasmid of Saccharomyces cerevisiae binds to a target containing three 13 base-pair symmetry elements called a, b and c. The symmetry elements b and c are in direct orientation while the a element is in inverted orientation with respect to b and c on the opposite side of an eight base-pair core region. Each symmetry element acts as a binding site for the FLP protein. The FLP protein can form three different complexes with the FLP recognition target (FRT site) according to the number of elements within the site that are occupied by the FLP protein. Binding of FLP to the FRT site induces DNA bending. We have measured the angles of bends caused by the binding of the FLP protein to full and partial FRT sites. We find that FLP induces three types of bend in the FRT-containing DNA. The type I bend is approximately 60 degrees and results from a molecule of FLP bound to one symmetry element. The type II bend is greater than 144 degrees and results from FLP molecules bound to symmetry elements a and b. The type III bend is approximately 65 degrees and results from FLP proteins bound to symmetry elements b and c. Certain FLP proteins that are defective in recombination can generate the type I and type III bends but are impaired in their ability to induce the type II bend. We discuss the role of bending in FLP-mediated recombination.     

Isolation of intermediates in the binding of the FLP recombinase of the yeast plasmid 2-micron circle to its target sequence

We describe a method for isolating and characterizing intermediates in the binding of the FLP recombinase, encoded by the yeast plasmid 2-micron circle to its target sequence. On a wild-type substrate, three specific complexes are formed. Footprinting analysis of the gel-purified complexes shows that each complex is the result of a unique FLP-DNA association. On the basis of the behavior of various FLP target sequences in the gel-binding assay, we propose a model describing the steps that lead to the formation of a stable FLP-DNA complex.     

DNA recognition by the FLP recombinase of the yeast 2 mu plasmid. A mutational analysis of the FLP binding site

The 2 mu plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombination system consisting of the FLP protein and two inverted recombination sites on the plasmid. The minimal fully functional substrate for in-vitro recombination in this system consists of two FLP protein binding sites separated by an eight base-pair spacer sequence. We have used site-directed mutagenesis to generate every possible mutation (36 in all) within 11 base-pairs of one FLP protein binding site and the base-pair immediately flanking it. The base-pairs within the binding site can be separated into three classes on the basis of these results. Thirty of the 36 sequence changes, including all three at seven different positions (class I) produce a negligible or modest effect on FLP protein-promoted recombination. In particular, most transition mutations are well-tolerated in this system. In only one case do all three possible mutations produce large effects (class II). At three positions, clustered near the site at which DNA is cleaved by FLP protein, one of the two possible transversions produces a large effect on recombination, while the other two changes produce modest effects (class III). For seven mutants for which FLP protein binding was measured, a direct correlation between decreases in recombination activity and in binding was observed. Positive effects on the reaction potential of mutant sites are observed when the other FLP binding site in a single recombination site is unaltered or when the second recombination site in a reaction is wild-type. This suggests a functional interaction between FLP binding sites both in cis and in trans. When two mutant recombination sites (each with 1 altered FLP binding site) are recombined, the relative orientation of the mutations (parallel or antiparallel) has no effect on the result. These results provide an extensive substrate catalog to complement future studies in this system.     

The yeast 2-micron plasmid Rep2 protein has Rep1-independent partitioning function

Equal partitioning of the multi-copy 2-micron plasmid of the budding yeast Saccharomyces cerevisiae requires association of the plasmid Rep1 and Rep2 proteins with the plasmid STB partitioning locus. Determining how the Rep proteins contribute has been complicated by interactions between the components. Here, each Rep protein was expressed fused to the DNA-binding domain of the bacterial repressor protein LexA in yeast harboring a replication-competent plasmid that had LexA-binding sites but lacked STB. Plasmid transmission to daughter cells was increased only by Rep2 fusion expression. Neither Rep1 nor a functional RSC2 complex (a chromatin remodeler required for 2-micron plasmid partitioning) were needed for the improvement. Deletion analysis showed the carboxy-terminal 65 residues of Rep2 were required and sufficient for this Rep1-independent inheritance. Mutation of a conserved basic motif in this domain impaired Rep1-independent and Rep protein/STB-dependent plasmid partitioning. Our findings suggest Rep2, which requires Rep1 and the RSC2 complex for functional association with STB, directly participates in 2-micron plasmid partitioning by linking the plasmid to a host component that is efficiently partitioned during cell division. Further investigation is needed to reveal the host factor targeted by Rep2 that contributes to the survival of these plasmids in their budding yeast hosts.     

Involvement of the inverted repeat of the yeast 2-micron plasmid in Flp site-specific and RAD52-dependent homologous recombination

Site-specific recombination within the Saccharomyces cerevisiae 2-micron DNA plasmid is catalyzed by the Flp recombinase at specific Flp Recognition Target (FRT) sites, which lie near the center of two precise 599-bp Inverted Repeats (IRs). However, the role of IR DNA sequences other than the FRT itself for the function of the Flp reaction in vivo is not known. In the present work we report that recombination efficiency differs depending on whether the FRT or the entire IR serves as the substrate for Flp. We also provide evidence for the involvement of the IR in RAD52-dependent homologous recombination. In contrast, the catalysis of site-specific recombination between two FRTs does not require the function of RAD52. The efficiency of Flp site-specific recombination between two IRs cloned in the same orientation is about one hundred times higher than that obtained when only the two FRTs are present. Moreover, we demonstrate that a single IR can activate RAD52-dependent homologous recombination between two flanking DNA regions, providing new insights into the role of the IR as a substrate for recombination and a new experimental tool with which to study the molecular mechanism of homologous recombination. Received: 14 June 1999 / Accepted: 3 November 1999     

High frequency of yeast transformation by plasmids carrying part or entire 2-micron yeast plasmid.

By using two chimeric plasmids containing yeast ura3 gene and 2-micron yeast DNA linked to the bacterial plasmid pCR1, yeast transformation of a high frequency has been achieved. The first plasmid is such that the 2-micron DNA part, in which the ura3 gene is incorporated, can be removed in one step and thus the 2-micron-ura3 sequence can be considered as a "transposable" block. In contrast, the second one bears the entire 2-micron plasmid and the ura3 gene is inserted in the bacterial plasmid part. As shown through hybridization experiments and genetic studies, the ura3 gene was maintained as a cytoplasmic element. Plasmids recovered from the yeast transformants were used to transform Escherichia coli. Their analysis by EcoRI showed that in many cases the vector had recombined with the endogenous 2-micron DNA of the recipient strain. The specific activity of orotidine 5'-monophosphate decarboxylase (coded by ura3) in yeast transformants was 10- to 30-fold higher than in the wild type.     

The FLP recombinase of yeast catalyzes site-specific recombination in the Drosophila genome

We have transferred the site-specific recombination system of the yeast 2 micron plasmid, the FLP recombinase and its recombination targets (FRTs), into the genome of Drosophila. Flies were transformed with an FLP gene under the control of hsp70 regulatory sequences and with a white gene flanked by FRTs. The heat-induced recombinase catalyzes recombination between FRTs, causing loss of white (seen somatically as white patches in the eye) and, less frequently, gain of white (seen as dark-red patches). Loss and gain frequencies vary with the severity of the heat shock, and patterns of mosaicism vary with the developmental stage at which the heat shock is applied. The recombinase is also active in the germline, producing white-eyed and dark-red-eyed progeny.     

The FLP protein contacts both major and minor grooves of its recognition target sequence.

The FLP protein of the 2 microns plasmid of Saccharomyces cerevisiae promotes conservative site-specific recombination between DNA sequences that contain the FLP recognition target (FRT). FLP binds to each of the three 13 base pair symmetry elements in the FRT site in a site-specific manner. We have probed both major and minor groove contacts of FLP using dimethyl sulphate, monoacetyl-4-hydroxyaminoquinoline 1-oxide and potassium permanganate and find that the protein displays extensive interactions with residues of both the major and minor grooves of 10 base pairs of each symmetry element. We find no evidence that the FRT site assumes a single-stranded conformation upon FLP binding.     

The 2-micron plasmid as a nonselectable, stable, high copy number yeast vector

The endogenous 2-microns plasmid of Saccharomyces cerevisiae has been used extensively for the construction of yeast cloning and expression plasmids because it is a native yeast plasmid that is able to be maintained stably in cells at high copy number. Almost invariably, these plasmid constructs, containing some or all 2-microns sequences, exhibit copy number levels lower than 2-microns and are maintained stably only under selective conditions. We were interested in determining if there was a means by which 2-microns could be utilized for vector construction, without forfeiting either copy number or nonselective stability. We identified sites in the 2-microns plasmid that could be used for the insertion of genetic sequences without disrupting 2-microns coding elements and then assessed subsequent plasmid constructs for stability and copy number in vivo. We demonstrate the utility of a previously described 2-microns recombination chimera, pBH-2L, for the manipulation and transformation of 2-microns as a pure yeast plasmid vector. We show that the HpaI site near the STB element in the 2-microns plasmid can be utilized to clone yeast DNA of at least 3.9 kb with no loss of plasmid stability. Additionally, the copy number of these constructs is as high as levels reported for the endogenous 2-microns.     

The minimal duplex DNA sequence required for site-specific recombination promoted by the FLP protein of yeast in vitro.

The 2-micron plasmid of the yeast Saccharomyces cerevisiae codes for a site-specific recombinase ('FLP') that efficiently catalyses recombination across the plasmid's two 599 bp repeats both in vivo and in vitro. We have used the partially purified FLP protein to define the minimal duplex DNA sequence required for intra- and intermolecular recombination in vitro. Previous DNase footprinting experiments had shown that FLP protected 50 bp of DNA around the recombination site. We made BAL31 deletions and synthetic FLP sites to show that the minimal length of the site that was able to recombine with a wild-type site was 22 bp. The site consists of two 7 bp inverted repeats surrounding an 8 bp core region. We also showed that the deleted sites recombined with themselves and that one of three 13 bp repeated elements within the FLP target sequence was not necessary for efficient recombination in vitro. Mutants lacking this redundant 13 bp element required a lower amount of FLP recombinase to achieve maximal yield of recombination than the wild type site. Finally, we discuss the structure of the FLP site in relation to the proposed function of FLP recombination in copy number amplification of the 2-micron plasmid in vivo.     

Site-specific recombination by the beta protein from the streptococcal plasmid pSM19035: minimal recombination sequences and crossing over site.

The beta recombinase from the broad host range Grampositive plasmid pSM19035 catalyzes intramolecular site-specific recombination between two directly or inversely oriented recombination sites in the presence of a chromatin-associated protein (Hbsu). The recombination site had been localized to a 447 bp DNA segment from pSM19035. This segment includes a 90 bp region that contains two adjacent binding sites (I and II) for beta protein dimers. Using in vitro recombination assays, we show that this 90 bp region is necessary and sufficient for beta protein-mediated recombination; this defines the six site as the region required for beta protein binding. The point of crossing over has been localized to the center of site I. Hbsu has a strong binding affinity for an unknown site located within the 447 bp segment containing the six site. We discuss the possibility that Hbsu recognizes an altered DNA structure, rather than a specific sequence, generated in the synaptic complex.     

Specific and non-specific contacts in protein crystals

Statistical analysis of protein-protein interfaces in a database of pure peptide crystals shows that the distribution of the contact area contains two components: a major exponential distribution and a minor flat distribution. Analysis of two sub-databases provides evidence that the two components represent specific and non-specific contacts, respectively. The probability of an interface with a given area being specific can be estimated. A scaled quantity (contact ratio) is introduced that is more useful than contact area for discriminating specific and non-specific contacts in protein crystals.     

Specific interaction between the initiator protein (Rep) and origin of plasmid ColE2-P9

The replication initiator protein (Rep) of plasmid ColE2-P9 (ColE2) is multifunctional. We are interested in how Rep binds to the origin (Ori) to perform various functions. We used the wild type and variants of Rep to study the Rep-Ori interaction by both in vitro and in vivo approaches, including biochemical analyses of protein-DNA interactions and an in vivo replication assay. We identified three regions (I, II, and III) of Rep, located in the C-terminal half, and three corresponding binding sites (I, II, and III) in Ori which are important for Rep-Ori interaction. We showed that region I, containing a putative helix-turn-helix motif, is necessary and sufficient for specific Ori recognition, interacting with site I of the origin DNA from the major groove. Region II interacts with site II of the origin DNA, from the adjacent minor groove in the left half of Ori, and region III interacts with site III, next to the template sequence for primer synthesis, which is one and one-half turn apart from site I on the opposite surface of the origin DNA. A putative linker region located between the two DNA binding domains (regions II and III) was identified, which might provide Rep an extended conformation suitable for binding to the two separate sites in Ori. Based on the results presented in this paper, we propose a model for Rep-Ori interaction in which Rep binds to Ori as a monomer.     

Vital roles of the second DNA-binding site of Rad52 protein in yeast homologous recombination

RecA/Rad51 proteins are essential in homologous DNA recombination and catalyze the ATP-dependent formation of D-loops from a single-stranded DNA and an internal homologous sequence in a double-stranded DNA. RecA and Rad51 require a "recombination mediator" to overcome the interference imposed by the prior binding of single-stranded binding protein/replication protein A to the single-stranded DNA. Rad52 is the prototype of recombination mediators, and the human Rad52 protein has two distinct DNA-binding sites: the first site binds to single-stranded DNA, and the second site binds to either double- or single-stranded DNA. We previously showed that yeast Rad52 extensively stimulates Rad51-catalyzed D-loop formation even in the absence of replication protein A, by forming a 2:1 stoichiometric complex with Rad51. However, the precise roles of Rad52 and Rad51 within the complex are unknown. In the present study, we constructed yeast Rad52 mutants in which the amino acid residues corresponding to the second DNA-binding site of the human Rad52 protein were replaced with either alanine or aspartic acid. We found that the second DNA-binding site is important for the yeast Rad52 function in vivo. Rad51-Rad52 complexes consisting of these Rad52 mutants were defective in promoting the formation of D-loops, and the ability of the complex to associate with double-stranded DNA was specifically impaired. Our studies suggest that Rad52 within the complex associates with double-stranded DNA to assist Rad51-mediated homologous pairing.