Incorporation of protein into spore coats is not cell autonomous in Dictyostelium.

At maturity, the spores of Dictyostelium are suspended in a viscous fluid droplet, with each spore being surrounded by its own spore coat. Certain glycoproteins characteristic of the spore coat are also dissolved in this fluid matrix after the spore coat is formed. To determine whether any proteins of the coat reside in this fluid phase earlier during the process of spore coat assembly, pairs of strains which differed in a spore coat protein carbohydrate marker were mixed and allowed to form spore coats in each other's presence. We reasoned that proteins belonging to an early, soluble, extracellular pool would be incorporated into the spore coats of both strains. To detect trans-incorporation, spores were labeled with a fluorescent antibody against the carbohydrate marker and each spore's fluorescence was analyzed by flow cytometry. Several proteins of both the outer and inner protein layers of the coat appeared to be faithfully and reciprocally trans-incorporated and hence judged to belong to a soluble, assembly-phase pool. Western blot analysis of sorted spores, and EM localization, confirmed this conclusion. In contrast, one outer-layer protein was not trans-incorporated, and was concluded to be insoluble at the time of secretion. Three classes of spore coat proteins can be described: (a) Insoluble from the time of secretion; (b) present in the early, soluble pool but not the late pool after spore coat formation; and (c) present in the soluble pool throughout spore coat assembly. These classes may, respectively: (a) Nucleate spore coat assembly; (b) comprise a scaffold defining the dimensions of the nascent spore coat; and (c) complete the assembly process by intercalation into the scaffold.     

Bacillus cereus cell and spore properties as influenced by the micro-structure of the medium

Aim:  To investigate the effect of different growth conditions on Bacillus cereus cell and spore properties.
Methods and Results:  Bacillus cereus was grown on agar plates with different surface water conditions (wet and dry) or viscosity. Cell populations displayed different types of behaviour, and heterogeneity was manifested in cell motility and dimension. Spore populations were heterogeneous regarding their properties, namely size and thermal resistance. The smallest spores were produced from flagellated cells, which also displayed jet-motility, growing on the wettest agar. Cytometric analysis also revealed within the smallest spores a sub-population labelled by propidium iodide (PI), indicating that spore populations were partly damaged. Nonmotile cells grown on diffusion-limiting media were elongated and produced the least thermal-resistant spores.
Conclusions:  The micro-structural properties of the media were found to influence cell and spore properties. Abundant surface water enabled flagellar motility and resulted in a heterogeneous cell and spore population, the latter including small and damaged spores. High viscosity gave rise to filamentous cells and more heat-sensitive spores.
Significance and Impact of the Study:  This study provides useful information on conditions resulting in heterogeneous populations of damaged and heat-sensitive spores.     

Adaptation of the Spore Discharge Mechanism in the Basidiomycota

Background

Spore discharge in the majority of the 30,000 described species of Basidiomycota is powered by the rapid motion of a fluid droplet, called Buller''s drop, over the spore surface. In basidiomycete yeasts, and phytopathogenic rusts and smuts, spores are discharged directly into the airflow around the fungal colony. Maximum discharge distances of 1–2 mm have been reported for these fungi. In mushroom-forming species, however, spores are propelled over much shorter ranges. In gilled mushrooms, for example, discharge distances of <0.1 mm ensure that spores do not collide with opposing gill surfaces. The way in which the range of the mechanism is controlled has not been studied previously.

Methodology/Principal Findings

In this study, we report high-speed video analysis of spore discharge in selected basidiomycetes ranging from yeasts to wood-decay fungi with poroid fruiting bodies. Analysis of these video data and mathematical modeling show that discharge distance is determined by both spore size and the size of the Buller''s drop. Furthermore, because the size of Buller''s drop is controlled by spore shape, these experiments suggest that seemingly minor changes in spore morphology exert major effects upon discharge distance.

Conclusions/Significance

This biomechanical analysis of spore discharge mechanisms in mushroom-forming fungi and their relatives is the first of its kind and provides a novel view of the incredible variety of spore morphology that has been catalogued by traditional taxonomists for more than 200 years. Rather than representing non-selected variations in micromorphology, the new experiments show that changes in spore architecture have adaptive significance because they control the distance that the spores are shot through air. For this reason, evolutionary modifications to fruiting body architecture, including changes in gill separation and tube diameter in mushrooms, must be tightly linked to alterations in spore morphology.     

Heat, hydrogen peroxide, and UV resistance of Bacillus subtilis spores with increased core water content and with or without major DNA-binding proteins.

Spores of a Bacillus subtilis strain with an insertion mutation in the dacB gene, which codes for an enzyme involved in spore cortex biosynthesis, have a higher core water content than wild-type spores. Spores lacking the two major alpha/beta-type small, acid-soluble proteins (SASP) (termed alpha-beta- spores) have the same core water content as do wild-type spores, but alpha-beta- dacB spores had more core water than did dacB spores. The resistance of alpha-beta-, alpha-beta- dacB, dacB, and wild-type spores to dry and moist heat, hydrogen peroxide, and UV radiation has been determined, as has the role of DNA damage in spore killing by moist heat and hydrogen peroxide. These data (i) suggest that core water content has little if any role in spore UV resistance and are consistent with binding of alpha/beta-type SASP to DNA being the major mechanism providing protection to spores from UV radiation; (ii) suggest that binding of alpha/beta-type SASP to DNA is the major mechanism unique to spores providing protection from dry heat; (iii) suggest that spore resistance to moist heat and hydrogen peroxide is affected to a large degree by the core water content, as increased core water resulted in large decreases in spore resistance to these agents; and (iv) indicate that since this decreased resistance (i.e., in dacB spores) is not associated with increased spore killing by DNA damage, spore DNA must normally be extremely well protected against such damage, presumably by the saturation of spore DNA by alpha/beta-type SASP.     

Sedimentation of Bacillus sphaericus in tap water and sewage water

Formulations of Bacillus sphaericus products were applied in 1-m columns of clean water and sewage water in tubes. Samples taken through valves attached to the walls of the tubes showed that spores settled as a function of application method, droplet size, particle size, and water characteristics. In a mixture of deionized and tap water, the slowest sedimentation rate was obtained with a primary powder sonicated in water with 0.1% detergent. This product and a commercial fluid product settled faster in sewage water than in clean water and after 4 weeks, most spores were found in the sediment. In clean water, most spores remained suspended during the 4 weeks but the density was highest at the bottom. Calculation of total spore numbers in the columns after 4 weeks indicated that about 90% of spores disappeared in clean water, and 95-97% disappeared in sewage water. Bioassays showed that toxicity declined in parallel with the sedimentation, but at a higher rate, indicating a loss of toxicity from the residual spores.     

Leaf Water Repellency as an Adaptation to Tropical Montane Cloud Forest Environments

Adaptations that reduce water retention on leaf surfaces may increase photosynthetic capacity of cloud forests because carbon dioxide diffuses slower in water than air. Leaf water repellency was examined in three distinct ecosystems to test the hypothesis that tropical montane cloud forest species have a higher degree of leaf water repellency than species from tropical dry forests and species from temperate foothills-grassland vegetation. Leaf water repellency was measured by calculating the contact angle of the leaf surface and the line tangent to a water droplet through the point of contact on the adaxial and the abaxial surface. Leaf water repellency was significantly different between the three study areas. The hypothesis that leaf water repellency is higher in cloud forest species than tropical dry forests and temperate foothills-grassland vegetation was not confirmed in this study. Leaf water repellency was lower for cloud forest species (adaxial surface = 50.8°; abaxial surface = 82.9°) than tropical dry forest species (adaxial surface = 74.5°; abaxial surface = 87.3°) and temperate foothills-grassland species (adaxial surface = 77.6°; abaxial surface = 95.8°). The low values of leaf water repellency in cloud forest species may be influenced by presence of epiphylls and loss of epicuticular wax on the leaf surfaces.     

Differences in the surface membranes and water content between the vegetative cells and spores of Bacillus subtilis

Bacillus subtilis forms both vegetative cells and spores. The fluidity of the membranes in these forms was measured by using fluorescent anisotropy of 1,6‐diphenyl‐1,3,5‐hexatriene (DPH). The spores were more rigid than the vegetative cells, suggesting that the structure of the spores and vegetative cells was different. This difference was thought to be due to the structure of the cell membranes. The anisotrophy of DPH in the cell membranes of spores gave higher values at all temperatures. The anisotrophy of DPH in the cell membranes of vegetative cells was lower than that of the spores and the value depended upon the temperature. Time Domain Reflectometry (TDR) was used to measure the quantities of bound and free water in the vegetative cells and spores. The spores were dehydrated, and the amount of bound and free water in the spores was about two‐thirds of the levels in the vegetative cells. The spores have fewer sugars molecules on their cell surface membranes, but contained as much sugars within the cell. Almost 100 per cent of the vegetative cells wee absorbed toward chitin, but the spores were not absorbed toward it at all. It was felt that the surface membrane of the vegetative cell had a high mobility because it was sugar‐rich, while the surface membrane of the spore showed a lower mobility because there are fewer sugars on the outer membrane. The spores survive in high temperatures because the surface membrane of the spore is tight and has relatively few sugars. Dehydration causes the rigidity of the spores. On the other hand, the vegetative cells are sugar‐ and water‐rich, which makes them more fluid. The difference between the vegetative cells and spores is the glycosylation of their surface membranes. Copyright © 1999 John Wiley & Sons, Ltd.     

Resting spore formation ofLeptocylindrus danicus (Bacillariophyceae) during short time-scale upwelling and its significance as predicted by a simple model

Resting spore formation during short time-scale upwelling and its significance were investigated in the field and by a simple theoretical model. Field observations of spore formation ofLeptocylindrus danicus were made off Izu Peninsula, Japan. A rapid increase in ratio of resting spore to vegetative cell numbers indicated thatL. danicus formed resting spores quickly as a response to nutrient depletion in the upwelled water, although only a very low number of resting spores was found in the upwelling. A simple model was constructed to investigate the possible advantages of spore formation during short time-scale upwelling. This showed that there is a critical time-scale for resting spore formation to be advantageous. The nutrient depletion period of the upwelling off Izu was shorter than the critical time-scale determined by the model. Rapid-sinking of resting spores may increase further the critical time-scale, unless spores return with upwelling water. For short time-scale upwelling, the vegetative cell may be better suited than the resting spore for enduring a short period of nutrient depletion. Contribution from Shimoda Marine Research Center, University of Tsukuba, No. 475.     

Cytological and genetic studies of the life cycle of Saccharomycopsis lipolytica

Summary In the alkane yeast Saccharomycopsis lipolytica (formerly: Candida lipolytica) the variability in the ascospore number is caused by the absence of a correlation between the meiotic divisions and spore wall formation. In four spored yeasts, after meiosis II, a spore wall is formed around each of the four nuclei produced by meiosis II. However, in the most frequently occurring two spored asci of S. lipolytica, the two nuclei are already enveloped by the spore wall after meiosis I due to a delay of meiosis II. This division takes place within the spore during the maturation of the ascus. In this case germination of the binucleate ascospore is not preceded by a mitosis. It follows that the cells of the new haploid clones are mononucleate. In the three spored asci, which occur rarely, only one nucleus is surrounded by a spore wall after meiosis I; the other nucleus undergoes meosis II before the onset of spore wall formation. The result is one binucleate and two mononucleate spores. In the one spored asci the two meiotic divisions occur within the young ascospore, i.e. spore wall formation starts immediately after development of the ascus. These cytological observations were substantiated by genetic data, which in addition confirmed the prediction that binucleate spores may be heterokaryotic. This occurs when there is a postreduction of at least one of the genes by which the parents of the cross differ. This also explains the high frequency of prototrophs in the progeny on non-allelic auxotrophs since random spore isolates are made without distinguishing between mono-and binucleate spores. The possibility of analysing offspring of binucleate spores by tetrad analysis is discussed. These findings enable us to understand the life cycle of S. lipolytica in detail and we are now in a position to start concerted breeding for strain improvement especially with respect to single cell protein production.     

Protein Translation Inhibition by Stachybotrys chartarum Conidia with and without the Mycotoxin Containing Polysaccharide Matrix

Recent studies have correlated the presence of Stachybotrys chartarum in structures with SBS. S. chartarum produces mycotoxins that are thought to produce some of the symptoms reported in sick-building syndrome (SBS). The conidia (spores) produced by Stachybotrys species are not commonly found in the air of buildings that have been found to contain significant interior growth of this organism. This could be due in part to the large size of the Stachybotrys spores, or the organism growing in hidden areas such as wall cavities. However, individuals in buildings with significant Stachybotrys growth frequently display symptoms that may be attributed to exposure to the organism's mycotoxins. In addition, Stachybotrys colonies produce a "slime" or polysaccharide (carbohydrate) matrix that coats the hyphae and the spores. The intent of this project was to determine whether the carbohydrate matrix and the mycotoxins embedded in it could be removed from the spores by repeated washings with either aqueous or organic solvents. The results demonstrated that the process of spore washing removed compounds that were toxic in a protein translation assay as compared to spores that were washed with an organic solution, however a correlation between carbohydrate removal during the washing process and the removal of mycotoxins from the spore surface was not observed. These data demonstrated that mycotoxins are not likely to be found exclusively in the carbohydrate matrix of the spores. Therefore, mycotoxin removal from the spore surface can occur without significant loss of polysaccharide. We also showed that toxic substances may be removed from the spore surface with an aqueous solution. These results suggest that satratoxins are soluble in aqueous solutions without being bound to water-soluble moieties, such as the carbohydrate slime matrix.     

Sequential Use of Wright's and Ziehl-Neelsen's Stains for Demonstrating Phagocytosis of Bacterial Spores

Nongerminating spores, germinating spores, and vegetative cells of Clostridium botulinum type A were observed during phagocytosis in the peritoneal fluid of white mice. Since phagocytes are easily ruptured by heat, the method described avoids heating, as this has been employed in conventional spore staining methods. A thin smear of the fluid is air dried on the slide for 2 hr, and stained by Wright's method: stain, 2 min; dilution water, 2 min; and rinsed; then in 0.005% methylene blue for 30 sec, and rinsed. This is followed by Ziehl-Neelsen's stain for 3-4 min and destained with 1: acetone-95% ethanol for 10 sec. The slide is rinsed, and Wright's staining repeated: stain 1 min, dilution 2-3 min; and thereafter washed about 5 ml of Wright's buffer. Blotting and air drying completes the staining. Non-germinating spores stain light red with a red spore wall, germinating spores are deep red throughout, vegetative cells are blue, and leucocytes show a dark purple nucleus and light blue cytoplasm.     

Analysis of the Loss in Heat and Acid Resistance during Germination of Spores of Bacillus Species

A major event in the nutrient germination of spores of Bacillus species is release of the spores'' large depot of dipicolinic acid (DPA). This event is preceded by both commitment, in which spores continue through germination even if germinants are removed, and loss of spore heat resistance. The latter event is puzzling, since spore heat resistance is due largely to core water content, which does not change until DPA is released during germination. We now find that for spores of two Bacillus species, the early loss in heat resistance during germination is most likely due to release of committed spores'' DPA at temperatures not lethal for dormant spores. Loss in spore acid resistance during germination also paralleled commitment and was also associated with the release of DPA from committed spores at acid concentrations not lethal for dormant spores. These observations plus previous findings that DPA release during germination is preceded by a significant release of spore core cations suggest that there is a significant change in spore inner membrane permeability at commitment. Presumably, this altered membrane cannot retain DPA during heat or acid treatments innocuous for dormant spores, resulting in DPA-less spores that are rapidly killed.     

Beetles provide directed dispersal of viable spores of a keystone wood decay fungus

Wood decay fungi are considered to be dispersed by wind, but dispersal by animals may also be important, and more so in managed forests where dead wood is scarce. We investigated whether beetles could disperse spores of the keystone species Fomitopsis pinicola. Beetles were collected on sporocarps and newly felled spruce logs, a favourable habitat for spore deposition. Viable spores (and successful germination) of F. pinicola were detected by dikaryotization of monokaryotic bait mycelium from beetle samples. Viable spores were on the exoskeleton and in the faeces of all beetles collected from sporulating sporocarps. On fresh spruce logs, nine beetle species transported viable spores, of which several bore into the bark. Our results demonstrate that beetles can provide directed dispersal of wood decay fungi. Potentially, it could contribute to a higher persistence of some species in fragmented forests where spore deposition by wind on dead wood is less likely.     

Monterey Bay Phytoplankton. II. Resting Spore Cycles in Coastal Diatom Populations

The purpose of this study is to examine the role of "restingspores" in natural population cycles of temperature, neriticdiatoms. Resting spores are a conspicuous element of centricdiatom populations in most neritic and some deep-water environmentsof the world oceans. Until recently the spores have been accepted,almost axiomatically, as surviving as a seasonal benthic stagewhich reinoculate the water column at the onset of favorablegrowth conditions. Data to support this hypothesis, however,is limited and contradictory. In my study, I am examining theoccurrence of resting spores in relation to vegetative cellcycles and oceanographic conditions in Monterey Bay, California,a nearshore upwelling-dominated system. I have utilized samplesfrom the water column, from settling-tubes, and from sedimentcores to document the cycles. Resting spore cycles were observed for many neritic species,and spore cycles for abundant species were considered in detail.Resting spore formation was associated with low nitrate concentrationsin surface waters. After spore formation in the water columnspores were found in settling-tubes and in sediment samples.Spore formation was a frequent event and spores were often presentin the water column and in the sediments. Observations of spore cycles in the present study were consistentwith the prevailing idea that resting spores function as benthicresting stages in coastal populations. The pelagic retentionand/or dispersal in coastal circulation cells, however, alsoappeared to be highly likely. The study has demonstrated thepotential for resting spores to function as survival stagesin Monterey Bay and in other regions with similar hydrographicconditions. The present evidence regarding the role of restingspores suggests that resting spores may have a wide range offunctions, and a more inclusive (or alternate) resting sporehypothesis is suggested.     

Activation and germination of Bacillus thuringiensis spores in Manduca sexta larval gut fluid

Incubation of Bacillus thuringiensis HD-1 spores in the larval gut fluid of Manduca sexta (tobacco hornworm) resulted in increased viable counts, conversion to phase-dark spores, and a loss of absorbance in spore suspensions, indicative of spore germination. Heat-activated and untreated spores incubated in water did not exhibit these changes. Only when spores were heat activated and incubated in germinants L-alanine and adenosine did changes in the spores approximate those observed in gut fluid. These data suggest that M. sexta larval gut fluid induces the activation and germination of B. thuringiensis spores.     

缩球囊霉孢子萌发及细胞核在孢子和芽管中分布的研究*

本文研究了从本校分离的丛枝菌根真菌缩球囊霉Glomus constrictum的孢子萌发和萌发孢子的细胞核DAPI(46-diamidino-2-phenylindol)染色。结果显示,G. constrictum孢子直径为179.5-198.7μm ,顶生于产孢菌丝上。经表面消毒处理后,孢子在水琼脂平板上7天开始萌发。DAPI染色后,经稀释荧光计数,单个孢子细胞核数目约为5300,在孢子中无序分布, 细胞核直径约为9.9-11.2μm 。孢子萌发过程中,细胞核总数无明显变化,只是部分细胞核从孢子流向了萌发伸长的菌丝。     

The spore wall and polar tube proteins of the microsporidian Nosema grylli: the major spore wall protein is released before spore extrusion

Incubation of Nosema grylli spores in alkaline--saline solution (10 mM KOH, 170 mM KCl) leads to solubilization of the major spore wall protein of 40 kDa (p40). Both the compounds of this solution are crucial for p40 solubilization. After spore incubation in 170 mM KCl no proteins were released in the medium. In contrast, 10 mM KOH causes a release of many spore proteins but only a small amount of p40. A long storage of spores (over a year) in water or 0.02% sodium azide results in a sharp decrease of p40 content. Specific polyclonal antibodies were obtained by immunization of rabbits with isolated p40. The specificity of serum was confirmed by immunoblotting. IFA showed reliable reaction on the envelopes of sporonts and sporoblasts, whereas only part of spores reacted with antibodies. This distinction may be due to changing surface antigens during spore maturation. Solubilization of p40 under alkaline conditions could be associated with spore extrusion, since a subsequent transfer of spores to neutral solution leads to their discharge. Subsequent wash of discharged spores with 1-3% SDS, 9 M urea and treatment by 100% 2-ME result in solubilization of protein of 56 kDa (p56). The maximum concentration of 2-ME is important for isolation of pure p56. Evidence has been provided that p56 is a protein of N. grylli polar tubes. Treatment of discharged spores by 2-ME in the presence of SDS results in solubilization of four additional proteins with molecular weights about 46, 34, 21 and 15 kDa.     

Heritable variation and mechanisms of inheritance of spore shape within a population of Scutellospora pellucida,an arbuscular mycorrhizal fungus

Substantial variation was found among single-spore cultures established from a single population of the arbuscular mycorrhizal fungus Scutellospora pellucida. A common environment experiment demonstrated that five single-spore cultures differed in their average spore shape (as measured by length:width ratios) and size (volume) with interisolate heritabilities of offspring mean values of 0.96 and 0.87, respectively (0.66 and 0.43 for the shape and size of individual spores). The distribution of offspring spore shapes also differed in levels of variance, skewness, and kurtosis. In fact, these aspects of the distributions shifted with mean spore shape as predicted by the binomial distribution—the distribution expected due to the segregation of genetically diverse nuclei through dividing hyphae. Thus, the original parental spores generating these cultures appear to have contained genetically variable nuclei, which then segregate into the offspring spores to generate consistent differences in the mean, variance, skewness, and kurtosis of the distribution of offspring spore shapes. This nuclear segregation may be followed by the assemblage of novel combinations of nuclei through hyphal fusion. Together these processes are rarely considered mechanisms for the creation of novel genetic combinations and may contribute to the maintenance of the high level of heritable variation observed in this study.     

Viability of Physarum polycephalum spores and ploidy of plasmodial nuclei.

Amoebae of Physarum polycephalum carrying the mth mating-type allele may differentiate into plasmodia in the absence of mating. Such plasmodia are haploid and, upon sporulation, produce mainly inviable spores. We have asked whether the viable spores arise from meiotic or mitotic divisions. Using a microfluorometric measurement of the deoxyribonucleic acid content of individual nuclei, we found the fraction of viable spores to be correlated with the proportion of rare, diploid nuclei containing in the generally haploid plasmodium. When homozygous diploid plasmodia were created by heat shocking, spore viability increased dramatically. We suggest that viable spores are produced via meiosis in mth plasmodia, that the mth allele has no effect on sporulation per se, and that the normal source of viable haploid spores is a small fraction of diploid nuclei ubiquitous in haploid plasmodia.     

Spores of Bacillus subtilis: their resistance to and killing by radiation, heat and chemicals

A number of mechanisms are responsible for the resistance of spores of Bacillus species to heat, radiation and chemicals and for spore killing by these agents. Spore resistance to wet heat is determined largely by the water content of spore core, which is much lower than that in the growing cell protoplast. A lower core water content generally gives more wet heat-resistant spores. The level and type of spore core mineral ions and the intrinsic stability of total spore proteins also play a role in spore wet heat resistance, and the saturation of spore DNA with alpha/beta-type small, acid-soluble spore proteins (SASP) protects DNA against wet heat damage. However, how wet heat kills spores is not clear, although it is not through DNA damage. The alpha/beta-type SASP are also important in spore resistance to dry heat, as is DNA repair in spore outgrowth, as Bacillus subtilis spores are killed by dry heat via DNA damage. Both UV and gamma-radiation also kill spores via DNA damage. The mechanism of spore resistance to gamma-radiation is not well understood, although the alpha/beta-type SASP are not involved. In contrast, spore UV resistance is due largely to an alteration in spore DNA photochemistry caused by the binding of alpha/beta-type SASP to the DNA, and to a lesser extent to the photosensitizing action of the spore core's large pool of dipicolinic acid. UV irradiation of spores at 254 nm does not generate the cyclobutane dimers (CPDs) and (6-4)-photoproducts (64PPs) formed between adjacent pyrimidines in growing cells, but rather a thymidyl-thymidine adduct termed spore photoproduct (SP). While SP is formed in spores with approximately the same quantum efficiency as that for generation of CPDs and 64PPs in growing cells, SP is repaired rapidly and efficiently in spore outgrowth by a number of repair systems, at least one of which is specific for SP. Some chemicals (e.g. nitrous acid, formaldehyde) again kill spores by DNA damage, while others, in particular oxidizing agents, appear to damage the spore's inner membrane so that this membrane ruptures upon spore germination and outgrowth. There are also other agents such as glutaraldehyde for which the mechanism of spore killing is unclear. Factors important in spore chemical resistance vary with the chemical, but include: (i) the spore coat proteins that likely react with and detoxify chemical agents; (ii) the relative impermeability of the spore's inner membrane that restricts access of exogenous chemicals to the spore core; (iii) the protection of spore DNA by its saturation with alpha/beta-type SASP; and (iv) DNA repair for agents that kill spores via DNA damage. Given the importance of the killing of spores of Bacillus species in the food and medical products industry, a deeper understanding of the mechanisms of spore resistance and killing may lead to improved methods for spore destruction.