Immobilization of fructosyltransferase by chitosan and alginate for efficient production of fructooligosaccharides

The effective system of reusing mycelial fructosyltransferase (FTase) immobilized with two polymers, chitosan and alginate were evaluated for continuous production of fructooligosaccharides (FOS). The alginate beads were successfully developed by maintaining spherical conformation of using 0.3% (w/v) sodium alginate with 0.1% (w/v) of CaCl₂ solution for highest transfructosylating activity. The characteristics of free and immobilized FTase were investigated and results showed that optimum pH and temperature of FTase activity were altered by immobilized materials. A successive production of FOS by FTase entrapped alginate beads was observed at an average of 62.96% (w/w) up to 7 days without much losing its activity. The data revealed by HPLC analysis culminate 67.75% (w/w) of FOS formation by FTase entrapped alginate beads and 42.79% (w/w) by chitosan beads in 36 h of enzyme substrate reaction.     

Increased Growth of the Microalga Chlorella vulgaris when Coimmobilized and Cocultured in Alginate Beads with the Plant-Growth-Promoting Bacterium Azospirillum brasilense

Coimmobilization of the freshwater microalga Chlorella vulgaris and the plant-growth-promoting bacterium Azospirillum brasilense in small alginate beads resulted in a significantly increased growth of the microalga. Dry and fresh weight, total number of cells, size of the microalgal clusters (colonies) within the bead, number of microalgal cells per cluster, and the levels of microalgal pigments significantly increased. Light microscopy revealed that both microorganisms colonized the same cavities inside the beads, though the microalgae tended to concentrate in the more aerated periphery while the bacteria colonized the entire bead. The effect of indole-3-acetic acid addition to microalgal culture prior to immobilization of microorganisms in alginate beads partially imitated the effect of A. brasilense. We propose that coimmobilization of microalgae and plant-growth-promoting bacteria is an effective means of increasing microalgal populations within confined environments.     

Spectrophotometric quantification of lactic bacteria in alginate and control of cell release with chitosan coating

Lactococcus lactis ssp. cremoris was entrapped within a Ca-alginate matrix, and an in situ spectrophotometric method for monitoring cell population in calcium alginate beads described. The intracapsular cell population can be estimated by measuring the optical density of beads containing cells, using cell-free beads as reference, or by measuring absorbance of a liquified bead suspension. Alginate beads, and beads coated with chitosan type I, II, and I and II mixtures, were examined for cell release. Lower viscosity chitosan (type I) coatings reduced cell release by a factor of 100 from10⁵ cfu ml⁻¹ to 10³ cfu ml⁻¹ after 6 h of fermentation. Reuse of chitosan I coated alginate beads also showed a reduction in cell release by a factor of 100. Cell loading and initial cell growth within the beads greatly affected cell release. Reducing the initial cell release would lower the overall levels of cell release throughout the fermentation. Compared to non-immobilized cultures, a 20–40% reduction in the lactic acid production rate was observed for alginate beads and chitosan I coated alginate beads, respectively. This reduction can be compensated for by increasing the intracapsular cell loading during immobilization, or before the onset of fermentation.     

Using polyethylene glycol as nonionic osmoticum to promote growth and lipid production of marine microalgae Nannochloropsis oculata

To promote the economic feasibility of Nannochloropsis oculata, efficacy of using polyethylene glycol (PEG) to increase microalgal growth and lipid accumulation was investigated. We first examined the effects of PEG concentrations on microalgal growth using 0–5 % (w/v) PEG-6000, and followed by exploring the effects of PEG molecular weights (400, 600, 2,000, 4,000, 6,000, and 20,000) on microalgal growth, size, as well as on yields of biomass, total lipids, and eicosapentaenoic acid. In addition, the capacity of PEG to reduce the effect of oxygen inhibition on microalgal growth was also investigated to evaluate its adaptability for use in large-scale and closed setting. Our results showed that PEG-induced osmotic stress (Π) in the range of 2.465–2.472 MPa can raise microalgal growth. The PEG with higher molecular weight exhibited greater efficacy of growth promotion but less lipid content under equal concentration. In this study, 0.5 % (w/v) PEG-20000 (Π = 2.466 MPa) remarkably enhanced microalgal growth without interference of intracellular lipid productivity and cellular size, yielding >50 % (w/w) increases in biomass, total lipid, and eicosapentaenoic acid amounts after 7 days that provided the optimal condition for microalgal cultivation. These positive effects possibly resulted from the moderate enhancement of osmotic stress in the medium and stronger chaotrope-like behavior from higher molecular weight PEG. With further verification that 0.5 % (w/v) PEG-20000 enabled to reduce the effect of oxygen inhibition on microalgal growth, the PEG-20000-mediated cultivation offers a feasible means for mass culture of N. oculata in closed setting.     

Enhancement of growth and secondary metabolite biosynthesis: Effect of elicitors derived from plants and insects

Plant-derived natural products have been and will continue to be valuable sources. Elicitors have been employed to modify cell metabolism in order to enhance the productivity of useful metabolites in plant cell/tissue cultures. In this study, several elicitors were used to improve the productivity of useful metabolites and to reduce culture time for archiving high concentration inP. ginseng hairy root cultures. The addition of chitosan, chitosan oligosaccharide and alginate oligosaccharide to the culture ofP. ginseng hairy roots caused growth to be inhibited with the increase in elicitor concentration. The usage of the chitosan elicitor andd-glucosamine caused a slight decrease in hairy root growth, whereas total ginseng saponin accumulated slightly with the increase in elicitor concentration. When gel beads were added to the culture medium at the initial period, hairy root growth was enhanced. The maximum growth was 1.35 times higher than that of the control at 1% (w/v). Total ginseng saponin content decreased due to the addition of alginate beads. This would result in consistent diffusion of lower levels of calcium ions during the culture period that promotes biomass growth.     

A comparative study on the production of amidase using immobilized and dehydrated immobilized cells of Pseudomonas putida MTCC 6809

Pseudomonas putida MTCC 6809, a plant growth promoting rhizobacteria producing amidase was isolated from the rhizosphere of Pisum sativum. The cells were immobilized in sodium alginate for the production of amidase and the effect of dehydration on immobilized beads were studied. Optimization of process parameters for amidase production was carried out to enhance enzyme production using immobilized cells. From the results it is clear that 2% and 3% (w/v) of alginate were suitable for amidase production with 12.8 and 13 U/ml activity, respectively after 36 h of incubation. Among the various substrates studied acetamide (2% w/v) was a good inducer of amidase. It was observed that immobilized catalysts could be recycled up to five batches. Amidase production was observed in both free and immobilized cells, nevertheless immobilization is much favored in comparison to free cells, as it leads to reusability of beads, lesser contamination, consistent amidase production and adaptability to wide range of culture conditions. The relative enzyme activity with the dehydrated beads was only 27% in comparison to hydrated beads, it is possible to pack considerably more into a fixed volume as the relative volume of dehydrated beads is 20%. Even though consistent amidase production was difficult to achieve using dehydrated beads, which may have certain advantages like less chances for microbial contamination and easy to transport.     

Effects of green LED light and three stresses on biomass and lipid accumulation with two-phase culture of microalgae

The effects of wavelengths of light-emitting diode (LED), nitrate concentration, and salt concentration were evaluated for the two-phase culture of the microalgal species Phaeodactylum tricornutum, Dunaliella tertiolecta, and Isochrysis galbana on cell growth and lipid production. Blue LEDs produced the highest biomass of P. tricornutum at a nitrate concentration of 8 mg/L, reaching 0.97 g dcw/L with a specific growth rate (μ) of 0.047 h⁻¹, followed by I. galbana with 0.79 g dcw/L and μ = 0.040 h⁻¹ and D. tertiolecta with 0.55 g dcw/L and μ = 0.028 h⁻¹. Of the three microalgae, P. tricornutum had the highest specific growth rate of μ_max = 0.070 h⁻¹ and lowest saturation constant of K_s = 4.18 mg/L, resulting in fast cell growth. The highest lipid production was obtained under green LED wavelength stress on day 14, reaching 60.6% (w/w) of the dry cell weight among the three microalgae. The main fatty acids produced by the three microalgae were myristic acid (C14:0), palmitic acid (C16:0), oleic acid (C18:1), and arachidic acid (C20:0), which comprised 72.68%–84.16% (w/w) of the total fatty acids content under three stresses.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Preparation of active corn peptides from zein through double enzymes immobilized with calcium alginate–chitosan beads

Double enzymes (alcalase and trypsin) were effectively immobilized in a composite carrier (calcium alginate–chitosan) to produce immobilized enzyme beads referred to as ATCC. The immobilization conditions for ATCC were optimized, and the immobilized enzyme beads were characterized. The optimal immobilization conditions were 2.5% of sodium alginate, 10:4 sodium alginate to the double enzymes, 3:7 chitosan solution to CaCl₂ and 2.5 h immobilization time. The ATCC beads had greatly enhanced stability and good usability compared with the free form. The ATCC residual activity was retained at 88.9% of DH (degree of hydrolysis) after 35 days of storage, and 36.0% of residual activity was retained after three cycles of use. The beads showed a higher zein DH (65.8%) compared with a single enzyme immobilized in the calcium alginate beads (45.5%) or free enzyme (49.3%). The ATCC kinetic parameters V_max and apparent K_m were 32.3 mL/min and 456.62 g⁻¹, respectively. Active corn peptides (CPs) with good antioxidant activity were obtained from zein in the ethanol phase. The ATCC might be valuable for preparing CPs and industrial applications.     

Chitosan Enriched Three-Dimensional Matrix Reduces Inflammatory and Catabolic Mediators Production by Human Chondrocytes

This in vitro study investigated the metabolism of human osteoarthritic (OA) chondrocytes encapsulated in a spherical matrix enriched of chitosan. Human OA chondrocytes were encapsulated and cultured for 28 days either in chitosan-alginate beads or in alginate beads. The beads were formed by slowly passing dropwise either the chitosan 0.6%–alginate 1.2% or the alginate 1.2% solution through a syringe into a 102 mM CaCl2 solution. Beads were analyzed histologically after 28 days. Interleukin (IL)-6 and -8, prostaglandin (PG) E₂, matrix metalloproteinases (MMPs), hyaluronan and aggrecan were quantified directly in the culture supernatant by specific ELISA and nitric oxide (NO) by using a colorimetric method based on the Griess reaction. Hematoxylin and eosin staining showed that chitosan was homogeneously distributed through the matrix and was in direct contact with chondrocytes. The production of IL-6, IL-8 and MMP-3 by chondrocytes significantly decreased in chitosan-alginate beads compared to alginate beads. PGE₂ and NO decreased also significantly but only during the first three days of culture. Hyaluronan and aggrecan production tended to increase in chitosan-alginate beads after 28 days of culture. Chitosan-alginate beads reduced the production of inflammatory and catabolic mediators by OA chondrocytes and tended to stimulate the synthesis of cartilage matrix components. These particular effects indicate that chitosan-alginate beads are an interesting scaffold for chondrocytes encapsulation before transplantation to repair cartilage defects.     

Dye decolorisation by laccase entrapped in copper alginate

A novel immobilisation system was developed for dye decolorisation using laccase produced by Ganoderma sp. KU-Alk4. The enzyme showed high efficiency in dye decolorisation when entrapped in Cu–Al and Cu-alginate beads. The former gave the highest activity but the enzyme activity survived longer in the latter. An experimental design of two 3 × 3 Latin Square experiments was applied to evaluate the effects of three different alginate compositions (low, intermediate and high mannuronate), concentration of alginate, (1.5, 3.0 and 4.5% w/v) and concentration of cross-linking agent, CuSO₄ (0.075, 0.15 and 0.225 M) on the decolorisation of indigo carmine dye and residual laccase activity in beads. The most significant factor for residual activity was the concentration of the cross-linking agent (P < 0.05) followed by alginate composition (P < 0.1). Increasing the alginate concentration resulted in only small increase in the dye decolorisation. However, higher laccase activity remained in 3.0% w/v alginate beads. Maximal dye decolorisation was achieved when 3.6% w/v low mannuronate alginate and 0.15 M CuSO₄ was used. Optimal conditions were confirmed in an extended experimental run. Results are presented from 9 successive batch runs over 12 days, reaching 96% removal of the dye (216 mg/l).     

Encapsulation of astaxanthin-rich Xanthophyllomyces dendrorhous for antioxidant delivery

Calcium alginate gel (CAG) beads were used to entrap the antioxidant astaxanthin-rich Xanthophyllomyces dendrorhous (ASX) by ionic gelation. ASX-CAG bead entrapment efficiency and release behavior, as influenced by alginate and CaCl₂ concentration and hardening time, were investigated. The optimized bead preparation conditions that gave rise to an efficient ASX release pattern were 1.5% alginate, 50 mM CaCl₂, and a 5 min hardening time. The antioxidant activity of non-encapsulated ASX was maintained for 4 days and then sharply decreased, whereas encapsulated ASX was maintained for 6 days. These results revealed that physical entrapment of ASX within CAG beads could be an effective technique for protecting the antioxidant activity of ASX from lipid peroxidation.     

Short communication: Methylparathion degradation by Pseudomonas sp. A3 immobilized in sodium alginate beads

An organophosphate-degrading soil isolate of Pseudomonas sp. A3, immobilized at 5% (wet wt/v) cell mass in 3% (w/v) sodium alginate beads, detoxified 99% of 1 mm methylparathion in 48 h. The beads were re-usable for five batches, the sixth batch only giving 73% methylparathion removal.     

Ionotropically emulsion gelled polysaccharides beads: Preparation,in vitro and in vivo evaluation

Floating famotidine loaded mineral oil-entrapped emulsion gel (MOEG) beads were prepared by the emulsion–gelation method. Different polysaccharides (sodium alginate and pectin), oil concentrations (10%, 20% and 30% w/w) and drug:polymer (D:P) ratios (1:1, 2:1 and 3:1) were used and their influence on beads uniformity, drug entrapment efficiency (DEE) and in vitro drug release, was studied. The results clearly indicated that retardation of drug release for 4 h was achieved by the oil hydrophobic diffusional barrier, especially in the presence of the compact network of alginate beads. Calcium alginate beads containing 20% oil and 2:1 D:P ratio, showed an optimum DEE of 88.32%. When evaluated in vivo, this formula displayed superior antiulcer activity (>2) over drug suspension or marketed conventional tablets.     

Evaluation of Chitosan/Alginate Beads Using Experimental Design: Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> Characterization

Bovine serum albumin-loaded beads were prepared by ionotropic gelation of alginate with calcium chloride and chitosan. The effect of sodium alginate concentration and chitosan concentration on the particle size and loading efficacy was studied. The diameter of the beads formed is dependent on the size of the needle used. The optimum condition for preparation alginate–chitosan beads was alginate concentration of 3% and chitosan concentration of 0.25% at pH 5. The resulting bead formulation had a loading efficacy of 98.5% and average size of 1,501 μm, and scanning electron microscopy images showed spherical and smooth particles. Chitosan concentration significantly influenced particle size and encapsulation efficiency of chitosan–alginate beads (p < 0.05). Decreasing the alginate concentration resulted in an increased release of albumin in acidic media. The rapid dissolution of chitosan–alginate matrices in the higher pH resulted in burst release of protein drug.     

Gel beads composed of collagen reconstituted in alginate

Spherical gel beads of collagen/alginate were prepared by discharging droplets of a mixture containing collagen (1.07-1.9 mg/ml) and alginate (1.2-1.5% w/v) into 1.5% w/v CaCl2 solution at 4°C. Collagen in the gel beads was reconstituted by raising the temperature to 37°C after alginate was liquefied by citrate. Scanning electron microscopy of the beads revealed the characteristic fibrous structure of collagen. To demonstrate the application of this new technique in cell culture, GH3 rat pituitary tumor cells were entrapped and grown in the gel beads. The immobilized cells proliferated to a density of 1.95 x 106 cell/ml which is about an order of magnitude higher than that grown in the alginate beads.     

Design of innovated lipid-based floating beads loaded with an antispasmodic drug: in-vitro and in-vivo evaluation

Context: Drotaverine hydrochloride (DRT) is used to treat gastrointestinal spasms accompanied with diarrhoea. Hence, the drug suffers from brief residence in the highly moving intestine during diarrhoea which leads to poor bioavailability and frequent dosing.

Objective: This study aimed to extend DRT residence in the stomach.

Methods: Calcium alginate floating beads were prepared using sodium alginate, isopropylmyristate (oil), and Gelucire® 43/01 (lipid) adopting emulsion gelation technique. The beads were evaluated for their floating ability, DRT entrapment efficiency and in-vitro release. Gelucire® 43/01 /oil-based beads of the selected formula were coated using ethylcellulose and different plasticizers as polyethylene glycol 400 and triethyl citrate to retard the drug release. The coated beads were re-characterized. Finally, the best formulae were investigated for their in-vivo floating ability in dogs besides their delivery to the systemic circulation compared to drug powder in human volunteers.

Results: Incorporation of Gelucire® 43/01 to oil-based beads enhanced the in-vitro performance of the beads. Coated beads prepared using drug:sodium alginate ratio of 1:3 (w/w), 20% (w/v) isopropylmyristate, 20% (w/v) Gelucire® 43/01 showed promising in-vitro performance. The beads floated for 12?h in the dogs’ stomach and produced three-fold increase of the total amount of DRT absorbed within 24?h compared to that of DRT powder.

Conclusions: Gelucire® 43/01 /isopropylmyristate-based calcium alginate floating beads coated with ethylcellulose using either PEG 400 or TEC as plasticizers proved to be a successful dosage form in extending DRT release.     

Use of agricultural surpluses for production of biomass by marine microalgae

The marine microalga Phaeodactylum tricornutum was cultivated in semi-continuous culture under mixotrophic conditions with the soluble fractions of potato, rye and wheat flours that had been naturally fermented, at 2% or 4% (w/v). The rye flour produced the highest microalgal cellular density of 90×10⁶ cells.ml^-1 when supplemented with NaNO₃ and NaH₂PO₄. The autotrophic control only gave 57×10⁶ cells.ml^-1. The value of agricultural surpluses, such as rye flour, can therefore be increased by its use in the production of valuable, microalgal biomass which is rich in protein, pigments and fatty acids.     

Vegetative cells of Bacillus pumilus entrapped in chitosan beads as a product for hydrocarbon biodegradation

The aim of this work was to develop a product using a bacterial strain entrapped in chitosan beads and evaluate its potential to degrade hexadecane. Among 41 isolates obtained from petroleum-contaminated sediments, two isolates, UFPEDA 831 and UFPEDA 840, were selected due to high growth potential utilizing hexadecane. Both isolates were cultivated under different conditions of pH, temperature, osmotic pressure and their susceptibility to antibiotics and resistance to ultraviolet radiation were evaluated. UFPEDA 831 and UFPEA 840 were identified as Ochrobactrum anthropic and Bacillus pumilus, respectively, based on their fatty acid profile and rDNA 16S sequencing. The effect of chitosan on cell viability and production of chitosanase by the selected strains were also evaluated. After these preliminary tests, only B. pumilus showed promising characteristics for immobilisation, and was subsequently entrapped in chitosan beads to be used to degrade hexadecane. The immobilised cells removed 90.8% of hexadecane from a 1% (v/v) solution within 144 h. The beads were analysed by SEM and revealed a homogeneous porous surface with a bacterial biofilm inside. The mechanical resistance of the beads associated with their reuse highlighted the potential of the product to be used for treatment of hexadecane from industrial effluents and/or contaminated environments.     

Increased growth of the microalga Chlorella vulgaris when coimmobilized and cocultured in alginate beads with the plant-growth-promoting bacterium Azospirillum brasilense

Coimmobilization of the freshwater microalga Chlorella vulgaris and the plant-growth-promoting bacterium Azospirillum brasilense in small alginate beads resulted in a significantly increased growth of the microalga. Dry and fresh weight, total number of cells, size of the microalgal clusters (colonies) within the bead, number of microalgal cells per cluster, and the levels of microalgal pigments significantly increased. Light microscopy revealed that both microorganisms colonized the same cavities inside the beads, though the microalgae tended to concentrate in the more aerated periphery while the bacteria colonized the entire bead. The effect of indole-3-acetic acid addition to microalgal culture prior to immobilization of microorganisms in alginate beads partially imitated the effect of A. brasilense. We propose that coimmobilization of microalgae and plant-growth-promoting bacteria is an effective means of increasing microalgal populations within confined environments.