Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

Gross Demonstration of the Mammalian Atrioventricular Bundle by A Periodic Acid-Schiff Procedure

The following procedure stains the atrioventricular conduction system selectively. (1) Wash the fresh heart with physiological saline solution to free it of blood; (2) fix it in 10% formalin containing 0.5% HIO₄ for 1 hr; (3) wash in 3 changes of distilled water for 20 min; (4) keep in 80% alcohol for 12 hr to 2 wk; (5) wash with distilled water; (6) treat with a dilute Schiff's reagent containing 0.1 gm of basic fuchsin per 100 ml for 0.5-2 min; (7) rinse in three changes of 2% Na₂SO₃ in 0.2 N HCI for 3-5 min; (8) wash and examine in 80% alcohol; store in 80% alcohol.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

Selective Staining of Neurosecretory Material in Semithin Epoxy Sections by Gomori's Aldehyde Fuchsin

The epoxy resin was removed from semithin (1 μm) sections by immersing them for 30 sec in sodium methoxide (Mayor et al., J. Biophys. Biochem. Cytol., 9: 909-10, 1961) and then processed as follows: (1) left for 1-3 hr at 60 C in a mixture of formalin, 25 ml; glacial acetic acid, 5 ml; CrO₃, 3 gm; and distilled water, 75 ml: (2) oxidized 10 min in a 1:1:6 v/v mixture of 2.5% KMnO₄, 5% H₂SO₄ and distilled water: (3) bleached in 1% oxalic acid, and (4) stained for 15 min in aldehyde fuchsin, 0.125% in 70% alcohol, or in a 1% aqueous solution of toluidine blue. The neurosecretory material is selectively stained.     

Staining Nerve Fibers After Sublimate-Acetic and After Bouin'S Fluid

A silver staining method for paraffin sections of material fixed in HgCl₂, sat. aq., with 5% acetic acid is as follows. Process the sections through the usual sequence of reagents, and including I-KI in 70% alcohol, thiosulfate (5% aq.), washing and back to 70% alcohol containing 5% of NH₄OH (conc. aq.). After 3 minutes in the ammoniated alcohol, wash through tap water and 2 changes of distilled water and silver 5-10 minutes at 25°C. in 15% AgNO₃ aq. to which 0.02 ml. of pyridine per 100 ml. has been added. Blot the slide, but not the section and do not rinse. Reduce at 45°C. in 0.1% pyrogallol in 55% alcohol, then rinse in 55% alcohol and wash in water. The remainder of the process consists of gold toning, intensifying in oxalic acid, fixing in 5% Na₂S₂O₃, washing, dehydrating, clearing and covering. When the specimen contains much smooth muscle, the I-KI solution is acidified before use by adding 2 ml. of 1N nitric acid per 100 ml., and the sections treated for 3 minutes instead of the usual 2 minutes. Formalin should not be added to sublimate-acetic, but specimens that do not contain strongly argyrophilic nonneural tissue may be fixed in formalin or, preferably, Bouin's fluid. Sections of tissue after the latter type of fixation will not require the I-KI and thiosulfate but can go from 95% alcohol to the ammoniated alcohol. The advantages of fixing in HgCl₂-acetic acid are suppression of the staining of connective tissue and intensifying the staining of nerve fibers.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

Staining Nuclei and Chromosomes in Protozoa

Technics for free-living forms such as Paramecium and for parasitic forms such as the opalinid ciliates are described.

Paramecium: Fix paramecia in hot Schaudinn's fluid containing 5% of glacial acetic acid for 5-15 minutes. (A hot water bath for maintaining the proper temperature of the fixative is described.) Dehydrate up to 83% alcohol. Mount the specimens on albuminized cover glasses. (A table for mounting animals on cover glasses is described.) Apply a thin layer of collodion to the cover glass to prevent the loss of the specimens during the subsequent handling. Pass through descending grades of alcohol to water. Mordant in 4% iron alum for 24 hours. Stain in 0.5% hematoxylin for 24 hours. Destain in saturated aqueous picric acid. Rinse in tap water, expose to ammonia vapor for a second, and then rinse again in tap water. Wash in running water for 1 hour. Dehydrate. Clear, then mount in damar.

Opalinid Ciliates: Make smears on cover glasses and fix them while wet. If the opalinids are to be subsequently stained in hematoxylin, fix in hot Schaudinn's fluid (containing 5% of glacial acetic acid) for 5-15 minutes. Pass through descending grades of alcohol to water. Mordant in iron alum for 24 hours. Stain in hematoxylin for 24 hours. Destain in saturated aqueous picric acid. For Feulgen reaction, fix in a modified weak Flemming's fluid for 1 hour. Wash in running water for 30 minutes. Hydrolyze. Leave 3 hours in fuchsin decolorized with H₂SO₃ (Feulgen formula). Wash in H₂SO₃, then in running water for 15 minutes. Dehydrate up to 95% alcohol. Counterstain with fast green FCF for 2 minutes. Dehydrate in absolute alcohol. Clear, then mount in damar.     

A Simple Histochemical Reaction for Aldehydes

A study has been made on the possibility of replacing leucofuchsin by colored basic fuchsin for the histochemical demonstration of aldehydes. Several tissues from mammals and various pertinent fixatives were used. Aldehydes were freed from carbohydrates by oxidation and from thymonucleic acid by hydrolysis.

It was found that the colored form and not necessarily the leucoform of basic fuchsin can be used histochemically in demonstrating aldehydes. The technic used is as follows: (1) Treat with 1.0-0.5% H₅IO₆ (or in 1% KIO₄ in M/1 H₂SO₄) for 5 to 10 min. and wash thoroughly. For thymonucleic acid hydrolize with N HCl 5 min. at room temperature, 10 min. at 60°C. and 5 min. at room temperature. (2) Stain for 2-3 min. with 0.05% basic fuchsin in 5% ethanol, 3% phenol. (3). Transfer immediately to 1 or 2 changes of 1% sodium bisulphite or potassium metabisulphite in 0.1-0.2 N H₂SO₄ for a total of 5 min. (4) Rinse with water and treat with M H₂SO₄ in 95% ethanol for 3-5 min. 6. Wash thoroughly in water and dehydrate, clear, and mount. For glycogen and mucin the following counterstaining solution is recommended: orange G, 0.25 g.; light green SFY, 0.10 g.; phosphotungstic acid 0.50 g.; 50% ethanol, 100 ml.; glacial acetic acid, 0.25 ml.     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

Bromphenol Blue as A Stain for Muscle Striations

Sections from formalin-fixed muscle are stained 4-24 hr with a 0.05% solution of bromphenol blue in 2% acetic acid, rinsed with water and placed in 0.5% acetic acid for 5-10 min. They are then treated 30 sec with tap water substitute (KHCO₃, 0.2 gm; MgSO₄, 2 gm; distilled water, 100 ml), rinsed, dehydrated in alcohol, cleared in xylene and covered in a polystyrene mountant Striatums of both cardiac and skeletal muscle fibers are fully resolved under oil immersion, against the blue background of the other parts of the fibers.     

Method for Staining Bacterial Flagella

The following method of staining bacterial flagella is ecommended for use on smears made from suspensions of 10 to 16-tour agar slant cultures, incubated 30 minutes at 37°C before spreadng on thoroly cleaned and named slides:

1. Cover with fixative (100 cc. of 1/4 sat. aqu. solution picric acid, with 5 g. tannic acid and 7.5 g. ferrous sulfate).
2. Wash with tap water, dry and cover with Fontana spirochaete stain; heat to steaming and allow to act for 1 to 2 minutes. Wash in ap water. The stain is prepared as follows: To 25 cc. 2% AgNO₃ add dilute ammonia till the precipitate which forms redissolves; then add more AgNO₃ till a faint turbidity results. A clear solution is useess.

     

A Pollen Grain Squash Technique for Saccharum and Related Genera

Anthers collected between 9 and 10 AM were treated for 1 hr at 26-28 C with a 0.5% solution of colchicine, washed for 2-4 min in water, placed in 0.002 M 8-hydroxyquinoline for 1 hr, washed in water for 10 min and fixed in: methanol, 60 ml; chloroform, 30 ml; distilled water, 20 ml; picric acid, 1 gm and mercuric chloride 1 gm, for 24 hr. After washing they were hydrolysed in 1 N HCl for 15 min at 60 C, stained in leuco basic fuchsin for 30 min, then smeared on a slide in a drop of acetocarmine. The slides were sealed, stored overnight, the paraffin was removed, and the slide passed through a 1:1 mixture of n-butyl alcohol and acetic acid, then through pure n-butyl alcohol and mounted in Canada balsam. The significant features of this procedure are: (1) use of chromosomes in the haploid condition for karyotype analysis, (2) better exaggeration of constrictions for easier interpretation of chromosome types and (3) good spreading in plants with a large chromosome number.     

Staining Tissue of the Central Nervous System with Luxol Fast Blue and Neutral Red

The tissue is fixed in 10% neutral saline formalin for 1 day to 3 wk depending on the size of the block, dehydrated and embedded in paraffin. The sections are stained at 57° C for 2 hr, then at 22° C for 30 min, in a 0.0125% solution of Luxol fast blue in 95% alcohol acidified by 0.1% acetic acid. They are differentiated in a solution consisting of: Li₂CO₃, 5.0 gm; LiOH-H₂O, 0.01 gm; and distilled water, 1 liter at 0-1° C, followed by 70% alcohol, and then treated with 0.2% NaHSO₃. They are soaked 1 min in an acetic acid-sodium acetate buffer 0.1 N, pH 5.6, then stained with 0.03% buffered aqueous neutral red. Sections are washed in distilled water, 1 sec, then treated with the following solution: CuSO₄·5H₂O, 0.5 gm; CrK(SO₄)₂·12H₂O, 0.5 gm; 10% acetic acid, 3 ml; and distilled water, 250 ml. Dehydration, clearing and covering complete the process. Myelin sheaths are stained bright blue; meninges and the adventitia of blood vessels are blue; red blood cells are green. Nissl material is stained brilliant red; axon hillocks, axis cylinders, ependyma, nuclei and some cytoplasm of neuroglia, media and endothelium of blood vessels are pink.     

Pyronin Y in the Methyl-Green-Pyronin Histological Stain

Two samples of pyronin Y were found which, with the exception of eosinophilic granules and osteoid, stained only nucleic acids in animal tissues. Good differentiation was obtained. with n-butyl alcohol. It was therefore possible to prepare a differentially staining mixture of either of these pyronins combined with methyl green. This mixture stains polymerized desoxyribose nucleic acid (DNA) clear green, depolymerized DNA and ribonucleic acid red. The red staining of eosinophilic granules and osteoid is readily distinguished by its persistence after ribonuclease or warm-buffer extraction. The staining mixture consists of: (1) pyronin Y (Edward Gurr or G. T. Gurr), CHCl₃ extracted, 2% aq, 12.5 ml; (2) methyl green, CHCl₃ extracted, 2% aq, 7.5 ml; (3) distilled water, 30 ml. The staining procedure is as follows. (1) Immerse slides 6 min in the dye mixture. (2) Blot with filter paper. (3) Immerse in 2 changes of n-butyl alcohol, 5 min each. (4) Xylene, 5 min. (5) Cedar oil, 5 min. (6) Apply Permount and cover.     

Tannic acid, Iron hematoxylin, Alcian blue, and Basic fuchsin for staining islets and reticular fibers of the pancreas

In this technique alpha cells are stained by basic fuchsin, beta cells by iron-hematoxylin, reticular fibers by ferric tannate, and much by alcian blue. Among 6 commonly used fixatives tested, Bouin's fluid fixation (8-12 hr) gave the best staining results. Procedure: paraffin sections to water; 0.5% Li₂CO₃ to remove picric acid; 20% tannic acid, 15 min; wash well; 2-4 sec in 0.5% basic fuchsin containing 10% alcohol; rinse, then differentiate in 1% aniline in 90% alcohol until alpha cells are red and beta cells pink; 1% phosphomolybdic acid, 1 min; 5% hematoxylin in 2% iron alum, 0.5 min; wash well; 1% filtered alcian blue SGX, 15 sec; rinse, dehydrate, clear, and mount in synthtic resin. Results: reticular fibers, black; acinar cells, orange to gray; alpha cells, red; collagenous fibers, red; beta cells, gray granules; ducts, bluish-green. The method was tested on rat, rabbit, dog, hamster, cow and man.     

A Tungstate Modification of the Golgi-Cox Method

Pieces of fresh nervous tissue 4-5 mm thick are put into the following solution: HgCl₂, 1 gm; K₂Cr₂O₇, 1 gm; K₂CrO₄, 0.8 gm; K₂WO₄ (or Na₂WO₄), 0.5 gm; distilled water 100 ml. They are kept undisturbed in the dark at room temperature for 20-30 days, then transferred to the following alkaline solution: LiOH (or NaOH), 1 gm; KNO₃, 15 gm; distilled water, 100 ml. After 12-24 hr in this solution they are washed for 12-24 hr in several changes of distilled water. (If sodium hydroxide was used, 0.5 ml of acetic acid should be added per 100 ml of wash water.) Embedding in celloidin follows dehydration. Sections are dehydrated in 3 parts of absolute alcohol and 1 part of chloroform, cleared in iodobenzene and mounted with a cover slip using a mounting medium with a refractive index around 1.61. The use of tungstate improves the general results and allows especially successful impregnations in very young animals, when the usual technic fails.     

A Six-Dye Staining Schedule for Sections of Mesquite and Other Desert Plants

Materials are fixed in FPA (formalin, 2; propionic acid, 1; 70% ethanol, 17). Paraffin sections on slides are brought to 50% ethanol and stained as follows: (1) in Bismarck brown Y, a 0.02% solution in 0.1% aqueous phenol, 10-30 min; wash 30 sec in 0.7% acetic acid, and wash in distilled water 20-30 sec; (2) in crystal violet, 1% in 70% ethanol alkalinized with 1 drop of 1 N NaOH per 100 ml, 12-35 min; wash 30-60 sec in tap water to remove excess stain, and rinse 0.5 sec in 70% ethanol; then mordant in I₂-KI, 1% each in 70% ethanol, 40 sec, and rinse in 70% ethanol 2-5 sec; (3) in a mixture containing 0.4% acid fuchsin and 0.6% crythrosin B in 70% ethanol about 0.5 sec; rinse in 70% ethanol 5-15 sec to remove excess red; dehydrate in 70%, 95%, and absolute ethanol, 2-3 sec each; (4) in fast green FCF, 0.5% in a mixture of equal parts of methyl cellosolve, absolute ethanol, and clove oil, 5-15 sec; rinse in a mixture of clove oil, 10 ml; absolute ethanol, 100 ml; and methyl cellosolve, 10 ml, 5-7 sec; (5) in orange G, 0.75 gm in a mixture of clove oil, 40 ml; absolute ethanol, 40 ml; and methyl cellosolve, 60 ml, 5-30 sec; rinse clean in a 1:1 mixture of xylene and absolute ethanol, 5-20 sec Complete the clearing in pure xylene, 3 changes, 1.5 min in each, and apply a cover glass with synthetic resin. Slides are agitated in all steps except Bismark brown Y, crystal violet, and the xylenes. Contrast and staining intensity are adjusted by varying staining times in the dye solutions.     

A Chlorate-Formaldehyde Modification of the Golgi Method

Pieces of fresh nervous tissue 3-5 mm thick are put into a mixture of: 6% K₂Cr₂O₇, 40 ml; 5% KClO₃, 20 ml; 20% chloral hydrate, 30 ml; and concentrated formalin (38% HCHO), 10 ml; allowed to fix 3 days, with a daily change of fluid; transferred to 3% K₂Cr₂O₇ for 3 days, with twice daily changes; then to 1% AgNO₃ for 3 days at 20-25° C. Frozen sections are cut, dehydrated, cleared and mounted in Permount with a cover glass. The method gives good results for microglia and oligodendroglia in addition to the usual staining of nerve cells and their processes.     

Acceleration of Mallory's Phosphotungstic Acid-Hematoxylin Staining for Skeletal Muscle Fixed in Formalin

The staining time for mammalian skeletal muscle fixed in neutral phosphate-buffered formalin was shortened from 12-24 hr to 10-30 min. The permanganate-oxalate sequence was omitted although oxidation by periodic acid or with iodine was found to be necessary. The material was embedded in paraffin and cut 6 μ or less. Deparaffinized sections were treated with 1% alcoholic iodine for 10 rain followed by 5% Na₂S₂O₃ for 2 min and placed in an oven at 60 C for 10-30 min to stain in a preheated mixture of 50 ml of ripened Mallory's phosphotungstic acid-hematoxylin and 1 ml of 2% phosphomolybdic acid. Experiments with fixation showed that the staining procedure followed Zenker's fluid successfully but not Bouin's fluid. Oxidation by KMnO₄ was effective only after Zenker fixation; oxidation by CrO₃ was unsuccessful.