A Short Term Quality Control Tool for Biodegradable Microspheres

Accelerated in vitro release testing methodology has been developed as an indicator of product performance to be used as a discriminatory quality control (QC) technique for the release of clinical and commercial batches of biodegradable microspheres. While product performance of biodegradable microspheres can be verified by in vivo and/or in vitro experiments, such evaluation can be particularly challenging because of slow polymer degradation, resulting in extended study times, labor, and expense. Three batches of Leuprolide poly(lactic-co-glycolic acid) (PLGA) microspheres having varying morphology (process variants having different particle size and specific surface area) were manufactured by the solvent extraction/evaporation technique. Tests involving in vitro release, polymer degradation and hydration of the microspheres were performed on the three batches at 55°C. In vitro peptide release at 55°C was analyzed using a previously derived modification of the Weibull function termed the modified Weibull equation (MWE). Experimental observations and data analysis confirm excellent reproducibility studies within and between batches of the microsphere formulations demonstrating the predictability of the accelerated experiments at 55°C. The accelerated test method was also successfully able to distinguish the in vitro product performance between the three batches having varying morphology (process variants), indicating that it is a suitable QC tool to discriminate product or process variants in clinical or commercial batches of microspheres. Additionally, data analysis utilized the MWE to further quantify the differences obtained from the accelerated in vitro product performance test between process variants, thereby enhancing the discriminatory power of the accelerated methodology at 55°C.     

A novelin vitro release technique for peptide-containing biodegradable microspheres

The purpose of this study was to develop and evaluate a dialysisin vitro release technique for peptide-containing poly(d, 1-lactide-coglycolide) (PLGA) microspheres (ms) that would correlate within vitro data. Using a luteinizing hormone- releasing hormone analogue (LHRH), Orntide acetate, solubility and stability were determined in 0.1 M phosphate buffer (PB), pH 7.4, and in 0.1 M acetate buffer (AB), pH 4.0, with highperformance liquid chromotography (HPLC), and peptide permeability through a dialysis membrane (molecular weight cut-off 300,000) was determined. Orntide ms were prepared by a dispersion/solvent extraction/evaporation method and characterized for drug content (HPLC), particle size distribution (laser diffraction method), and surface morphology (scanning electron microscopy).In vitro release was studied in PB using a conventional extraction method and with a new dialysis method in AB. Gravimetric analyses of polymer mass loss and matrix hydration, and peptide adsorption to blank PLGA ms (50∶50, M_w 28 022) were carried out in PB and AB upon incubation at 37°C. Serum Orntide and testosterone levels in rats after administration of Orntide ms were determined by radioimmunoassay. Orntide acetate solubility was influenced by pH; approximately 2.3 mg/mL dissolved in PB and >18 mg/mL in AB. Stability was pH- and temperature-dependent. The peptide was very stable at pH 4.0, 4°C, but degraded rapidly at pH 7.4,37°C. Peptide permeability through the dialysis membrane was accelerated by agitation and>95% equilibrium was reached within 48 hours. The overall release rate was higher with the dialysis method. Mass loss of the Orntide ms was faster in AB (50% loss in 3 weeks: 95% in 35 days) than in PB (65% in 35 days). In contrast, hydration after 35 days was 4-fold higher in PB. The nonspecific adsorption to blank ms was greater in PB (128 μ g Orntide/10 mg PLGA) compared with AB (<5 μ g Orntide/10 mg PLGA). Administration of 30-day Orntide PLGA ms to rats resulted in an initial serum Orntide level of 21 ng/mL after 6 hours and a C_max of 87 ng/mL after 6 days. Testesterone levels were suppressed immediately after ms administration (3 mg Orntide/Kg) from 5.2 ng/mL to 0.3 ng/mL (after 24 hours) and remained suppressed for 38 days. Orntide acetate solubility and degradation kinetics were markedly influenced by pH of the buffer systems and mass loss; matrix hydration, as well as the nonspecific adsorption to blank ms, was pH-dependent. Thein vitro release profile obtained with the dialysis method in AB correlated well with thein vivo data, therepy providing a more reliable prediction ofin vivo performance.     

Particle size and temperature effect on the physical stability of PLGA nanospheres and microspheres containing Bodipy

The purpose of this study was to investigate the effect of particle size, storage temperature, and duration of storage on the physical stability and morphology of polylactic-co-glycolic acid (PLGA) nanospheres and microspheres. PLGA nanospheres and microspheres containing the fluorescent dye, Bodipy, were prepared in varying sizes by controlling the method and degree of agitation during the emulsification phase of preparation. Mean diameters of the particles were measured by dynamic light scattering. To evaluate the effect of storage temperature and duration of storage on the extent of aggregation, nanospheres and microspheres were stored at 4°C, 25°C, 37°C, and 50°C for 6 days and then monitored using both confocal and scanning electron microscopy. The mean ±SD diameters of PLGA particles containing Bodipy were: 266.9±2.8, 351.6±1.8, 988.8±14.1, and 1865.9±67.0 nm. The extent of aggregation of the particulate delivery system decreased as the mean diameter increased, and increased as the storage temperature increased. The maximum extent of aggregation was observed with the smallest (266 nm) nanospheres. Microspheres did not aggregate. The aggregation of nanospheres was significantly reduced by introducing an additional evaporation step during preparation, suggesting that migration of residual dichloromethane from within the nanospheres may have dissolved the PLGA on the surface. The extent of aggregation of nanospheres increased as the temperature was increased from 4°C to 50°C, and decreased as particle size increased. To avoid aggregation, PLGA nanospheres should be stored at 4°C.     

A model-dependent approach to correlate accelerated with real-time release from biodegradable microspheres

The purpose of this study was to determine the feasibility of applying accelerated in vitro release testing to correlate or predict long-term in vitro release of leuprolide poly(lactideco-glycolide) microspheres. Peptide release was studied using a dialysis technique at 37°C and at elevated temperatures (50°C–60°C) in 0.1 M phosphate buffered saline (PBS) pH 7.4 and 0.1 M acetate buffer pH 4.0. The data were analyzed using a modification, of the Weibull equation. Peptide release was temperature dependent and complete within 30 days at 37°C and 3 to 5 days at the elevated temperatures. In vitro release profiles at the elevated temperatures correlated well with release at 37°C. The shapes of the release profiles at all temperatures were similar. Using the modified Weibull equation, an increase in temperature was characterized by an increase in the model parameter, α, a scaling factor for the apparent rate constant. Complete release at 37°C was shortened from ∼30 days to 5 days at 50°C, 3.5 days at 55°C, 2.25 days at 60°C in PBS pH 7.4, and 3 days at 50°C in acetate buffer pH 4.0. Values for the model parameter β indicated that the shape of the release profiles at 55°C in PBS pH 7.4 (2.740) and 50°C in 0.1 M acetate buffer pH 4.0 (2.711) were similar to that at 37°C (2.577). The E_a for hydration and erosion were determined to be 42.3 and 19.4 kcal/mol, respectively. Polymer degradation was also temperature dependent and had an E_a of 31.6 kcal/mol. Short-term in vitro release studies offer the possibility of correlation with long-term release, thereby reducing the time and expense associated with longterm studies. Accelerated release methodology could be useful in the prediction of long-term release from extended release microsphere dosage forms and may serve as a quality control tool for the release of clinical or commercial batches. Selected for the 2005 AAPS Outstanding Graduate Student Research Award in Pharmaceutical Technologies Sponsored by Solvay Pharmaceuticals.     

Identification of chemically modified peptide from poly(D,L-lactide-co-glycolide) microspheres under in vitro release conditions

The purpose of this research was to study the chemical reactivity of a somatostatin analogue octreotide acetate, formulated in microspheres with polymers of varying molecular weight and co-monomer ratio under in vitro testing conditions. Poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide) (PLA) microspheres were prepared by a solvent extraction/evaporation method. The microspheres were characterized for drug load, impurity content, and particle size. Further, the microspheres were subjected to in vitro release testing in acetate buffer (pH 4.0) and phosphate buffered saline (PBS) (pH 7.2). In acetate buffer, 3 microsphere batches composed of low molecular weight PLGA 50∶50, PLGA 85∶15, and PLA polymers (≤10 kDa) showed 100% release with minimal impurity formation (<10%). The high molecular weight PLGA 50∶50 microspheres (28 kDa) displayed only 70% cumulative release in acetate buffer with significant impurity formation (∼24%). In PBS (pH 7.4), on the other hand, only 50% release was observed with the same low molecular weight batches (PLGA 50∶50, PLGA 85∶15, and PLA) with higher percentages of hydrophobic impurity formation (ie, 40%, 26%, and 10%, respectively). In addition, in PBS, the high molecular weight PLGA 50∶50 microspheres showed only 20% drug release with ∼60% mean impurity content. The chemically modified peptide impurities inside microspheres were structurally confirmed through Fourier transform-mass spectrometry (FT-MS) and liquid chromatography/mass spectrometry (LC-MS/MS) analyses after extraction procedures. The adduct compounds were identified as covalently modified conjugates of octreotide with lactic and glycolic acid monomers within polymeric microspheres. The data suggest that due to steric hindrance factors, polymers with greater lactide content were less amenable to the formation of adduct impurities compared with PLGA 50∶50 copolymers.     

胶原酶缓释微球的研究

目的:本实验旨在开发一种胶原酶缓释微球制剂,用以治疗手掌腱膜挛缩症,以减小现有水针剂的不足。方法:利用水相-水相乳化法和低温冷冻相分离法两种方法制备载药颗粒,分别将其包裹于PLGA微球内,制备成胶原酶微球,并用扫描电镜考察其表面形态,对其粒径进行统计学分析,测定体外释放行为并比较。结果:两种方法制备的微球表面光滑圆整,都可以达到缓释的效果,一个星期内释药完全。水相-水相乳化法制备的微球比低温冷冻相分离制备的微球粒径大,且具有统计学差异(P0.05)。水相-水相乳化法制备的微球粒径较均一,其体外释放更加平缓,突释较小。结论:本研究制得的胶原酶微球能实现理想的体外缓释效果,解决了现有技术中胶原酶粉针剂型快速释放并分散的问题。     

Characterization of 5-fluorouracil microspheres for colonic delivery

The purpose of this investigation was to prepare and evaluate the colon-specific microspheres of 5-fluorouracil for the treatment of colon cancer. Core microspheres of alginate were prepared by the modified emulsification method in liquid paraffin and by cross-linking with calcium chloride. The core microspheres were coated with Eudragit S-100 by the solvent evaporation technique to prevent drug release in the stomach and small intestine. The microspheres were characterized by shape, size, surface morphology, size distribution, incorporation efficiency, and in vitro drug release studies. The outer surfaces of the core and coated microspheres, which were spherical in shape, were rough and smooth, respectively. The size of the core microspheres ranged from 22 to 55 μm, and the size of the coated microspheres ranged from 103 to 185 μm. The core microspheres sustained the drug release for 10 hours. The release studies of coated microspheres were performed in a pH progression medium mimicking the conditions of the gastrointestinal tract. Release was sustained for up to 20 hours in formulations with core microspheres to a Eudragit S-100 coat ratio of 1∶7, and there were no changes in the size, shape, drug content, differential scanning calorimetry thermogram, and in vitro drug release after storage at 40°C/75% relative humidity for 6 months.     

降钙素葡聚糖颗粒缓释微球的研究

目的：降钙素（一个由32个氨基酸组成的多肽）是治疗骨质疏松的首选药之一。降钙索的劣势是其半衰期过短,需要一天一次注射给药,本实验旨在制备突释小,药物释放浓度稳定的降钙素微球制剂。方法：制备降钙素羧酸葡聚糖颗粒和降钙素硫酸葡聚糖颗粒组合物,分别将其包裹于PLGA微球内,制备成降钙素组合微球,采用C18反相色谱柱研究药物的包封率和体外释放行为。结果：所制得的降钙素葡聚糖颗粒缓释微球体外释放一个月,释放曲线比较完美,接近零级释放。结论：本研究制得的降钙素葡聚糖颗粒缓释组合微球能实现理想的体外缓释效果,为后期药动学实验提供基础。     

血管内皮生长因子(VEGF)乳液法电纺纤维膜的体外研究

目的:研究担载血管内皮生长因子(VEGF)的乳液法电纺纤维膜的亲水性能、外观形态和机械性能,纤维膜中VEGF的包封率和体外释放动力学,为评价其能否应用于血管再生领域的研究奠定基础。方法:将VEGF水溶液通过W/O乳液法制备成缓释VEGF的生物可降解的丙交酯-乙交酯共聚物(PLGA)静电纺丝纤维膜,对该纤维膜的接触角、外观形态、机械性能进行表征,Elisa法测定该纤维膜的体外14天的释放行为,分别观察纤维膜释放0天、7天、14天后的电镜图。结果:加入VEGF后,纤维膜的接触角由140.0°减小到136.1°,亲水性增强,具有类似细胞外基质(ECMs)网状结构和良好的力学性能,纤维膜第1天的突释不超过载药量的50%,电镜图下显示纤维膜释放1周时纤维发生断裂。结论:通过乳液法制备的担载VEGF的电纺纤维膜具有良好的物理性能,能够持续缓释VEGF,可作为血管再生的组织工程支架进行深入研究。     

Derivation of an Analytical Solution to a Reaction-Diffusion Model for Autocatalytic Degradation and Erosion in Polymer Microspheres

A mathematical reaction-diffusion model is defined to describe the gradual decomposition of polymer microspheres composed of poly(D,L-lactic-co-glycolic acid) (PLGA) that are used for pharmaceutical drug delivery over extended periods of time. The partial differential equation (PDE) model treats simultaneous first-order generation due to chemical reaction and diffusion of reaction products in spherical geometry to capture the microsphere-size-dependent effects of autocatalysis on PLGA erosion that occurs when the microspheres are exposed to aqueous media such as biological fluids. The model is solved analytically for the concentration of the autocatalytic carboxylic acid end groups of the polymer chains that comprise the microspheres as a function of radial position and time. The analytical solution for the reaction and transport of the autocatalytic chemical species is useful for predicting the conditions under which drug release from PLGA microspheres transitions from diffusion-controlled to erosion-controlled release, for understanding the dynamic coupling between the PLGA degradation and erosion mechanisms, and for designing drug release particles. The model is the first to provide an analytical prediction for the dynamics and spatial heterogeneities of PLGA degradation and erosion within a spherical particle. The analytical solution is applicable to other spherical systems with simultaneous diffusive transport and first-order generation by reaction.     

左旋多巴甲酯缓释微球的研究

目的：由于长期服用左旋多巴治疗帕金森病,其药物浓度波动刺激易引起异动症,本实验旨在制备突释小,药物释放浓度稳定的左旋多巴甲酯微球制剂。方法：将左旋多巴甲酯用复乳法包裹于PLGA微球内,采用C18反相色谱研究药物包封率和体外释放行为。结果：通过调节药物浓度和不同高分子组合筛选出突释小,包封率高且缓慢释放的处方。结论：左旋多巴甲酯包裹于PLGA能实现理想的缓释效果,降低药物浓度波动,为后期药效学实验提供基础。     

Evaluation of orntide microspheres in a rat animal model and correlation to in vitro release profiles

Orntide acetate, a novel luteinizing hormone-releasing hormone (LHRH) antagonist, was prepared and evaluated in vivo in 30-day and 120-day sustained delivery formulations using a rat animal model. Orntide poly(d,l- lactide-co-glycolide) (PLGA) and poly(d,l- lactide) (PLA) microspheres were prepared by a dispersion method and administered subcutaneously in a liquid vehicle to rats at 2.2 mg Orntide/kg of body weight (30-day forms) or 8.8 mg Orntide/kg (120-day forms). Serum levels of Orntide and testosterone were monitored by radioimmunoassays, and a dose-response study at 4 closes (3, 2.25, 1.5, and 1.75 mg Orntide/kg) was conducted to determine the effective dose of Orntide. Microspheres with diameters between 3.9 and 14 μ were prepared. The onset and duration of testosterone suppression varied for different microsphere formulations and were influenced both by polymer properties and by microsphere characteristics. Microspheres prepared with 50∶50 and 75∶25 copolymers effectively sustained peptide release for 14 to 28 days, whereas an 85∶15 copolymer and the PLA microspheres extended the pharmacological response for more than 120 days. Increase in drug load generally accelerated peptide release from the microspheres, resulting in higher initial serum levels of Orntide and shorter duration of the release: In general, apparent release was faster in vivo than under in vitro conditions. Orntide microspheres effectively suppressed testosterone in rats, providing rapid onset of release and extended periods of chemical castration. Testosterone suppression occurred immediately after microsphere administration without the initial elevation seen with LHRH superagonists.     

Long-term release of clodronate from biodegradable microspheres

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions. Published: July 11, 2001.     

The role of protease inhibitors and albumin on the membrane shedding of human erythrocytes.

Human erythrocytes incubated at 37° C in a physiological solution containing divalent cations but without glucose release up to 55% of the total sialoglycopeptides of the membrane within 60 hrs. The inhibition of the release by soybean trypsin inhibitor (SbTI), trasylol and epsilon amino-n-caproic acid (EACA), suggests that proteases bound to the membrane are probably responsible for the membrane shedding. Human albumin reduces significantly the membrane proteolysis.     

Conditions for Maximum Enflagellation in Naegleria fowleri1

ABSTRACT. Ameba to flagellate transformation in Naegleria fowleri (Lovell strain) was affected by growth temperature, phase of growth, strain of ameba, culture agitation, enflagellation temperature, enflagellation diluent, and cell concentration. Amebae transformed best when they were grown without agitation and enflagellated with agitation. Regardless of growth temperature (23°, 30°, 37°, and 42°C were tested), amebae transformed best at 37°C. Enflagellation was greatest for cells harvested between 24 h (mid-exponential) and 84 h (late stationary) of growth.     

Oviposition by Trichostrongylus colubriformis (Nematoda) in vitro

Summary

Oviposition by females of the ruminant nematode Trichostrongylus colubriformis was influenced by in vitro conditions. Release of eggs declined linearly during incubation for 4.5 h. An average of 8.8 eggs was deposited by females during the first hour in vitro. Decreased pH, temperature, and osmolarity caused reduced production of eggs. Storage of females at 4°C had no effect on subsequent oviposition at 37°C. Oviposition was similar under light and dark conditions. Concomitant males or the female's age did not influence production of eggs in vitro. The release of eggs in vitro was significantly decreased by octapamine and GABA while serotonin elevated oviposition. Thus, environmental stimuli from the host may partially modulate helminth fecundity.     

Reversible Blocking of Amino Groups of Octreotide for the Inhibition of Formation of Acylated Peptide Impurities in Poly(Lactide-co-Glycolide) Delivery Systems

The purpose of this study was to develop a novel method to inhibit the formation of acylated peptide impurities in poly(d,l-lactide-co-glycolide) (PLGA) formulations by reversely blocking the amino groups of octreotide with maleic anhydride (MA). Two mono-MA conjugates with different modification sites (N terminus and Lys residue) and di-MA conjugate of octreotide were prepared and isolated by reversed-phase high-performance liquid chromatography (RP-HPLC). The polymer interaction of peptides and the formation of acylated peptides were monitored by RP-HPLC. The stability of MA-octreotide conjugates in PLGA films was studied in 0.1 M phosphate buffer (pH 7.4) at 37°C. The conjugation of MA to octreotide substantially inhibited the interaction of peptide with PLGA polymer and the subsequent formation of acylated peptide impurities. The MA-octreotides were successfully converted to intact octreotide as pH drops by PLGA hydrolysis. In PLGA films, MA-octreotide also showed complete inhibition of peptide acylation. In conclusion, MA conjugation provides a viable approach for stabilizing peptides in PLGA delivery systems.     

Preparation and characterization of poly(D,L-lactide-co-glycolide) microspheres for controlled release of human growth hormone

The purpose of this research was to assess the physicochemical properties of a controlled release formulation of recombinant human growth hormone (rHGH) encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) composite microspheres. rHGH was loaded in poly(acryloyl hydroxyethyl) starch (acHES) microparticles, and then the protein-containing microparticles were encapsulated in the PLGA matrix by a solvent extraction/evaporation method. rHGH-loaded PLGA microspheres were also prepared using mannitol without the starch hydrogel microparticle microspheres for comparison. The detection of secondary structure changes in protein was investigated by using a Fourier Transfer Infrared (FTIR) technique. The composite microspheres were spherical in shape (44.6±2.47 μm), and the PLGA-mannitol microspheres were 39.7±2.50 μm. Drug-loading efficiency varied from 93.2% to 104%. The composite microspheres showed higher overall drug release than the PLGA/mannitol microspheres. FTIR analyses indicated good stability and structural integrity of HGH localized in the microspheres. The PLGA-acHES composite microsphere system could be useful for the controlled delivery of protein drugs.     

Formulation and in vitro transfection efficiency of poly (D, L-lactideco-glycolide) microspheres containing plasmid DNA for gene delivery

The stability, in vitro release, and in vitro cell transfection efficiency of plasmid DNA (pDNA) poly (D,L.-lactide-co-glycolide) (PLGA) microsphere formulations were investigated. PLGA microspheres containing free and polylysine (PLL)-complexed pDNA were prepared by a water-oil-water solvent extraction/evaporation technique. Encapsulation enhanced the retention of the supereoiled structure of pDNA as determined by gel electrophoresis. PLL complexation of pDNA prior to encapsulation increased both the stability of the supercoiled form and the encapsulation efficiency. Free pDNA was completely degraded after exposure to DNase while encapsulation protected the pDNA from enzymatic degradation. Rapid initial in vitro release of pDNA was obtained from microspheres containing free pDNA. while the release from microspheres containing PLL-complexed pDNA was sustained for more than 42 days. Bioactivity of encapsulated pDNA determined by in vitro cell transfection using Chinese hamster ovary cells (CHO) showed that the bioactivity of encapsulated pDNA was retained in both formulations but to a greater extent with PLL-complexed pDNA microspheres. These results demonstrated that PLGA microspheres could be used to formulate a controlledrelease delivery system for pDNA that can protect the pDNA from DNase degradation without loss of functional activity.     

左旋多巴甲酯缓释微球的研究

目的:由于长期服用左旋多巴治疗帕金森病,其药物浓度波动刺激易引起异动症,本实验旨在制备突释小,药物释放浓度稳定的左旋多巴甲酯微球制剂。方法:将左旋多巴甲酯用复乳法包裹于PLGA微球内,采用C18反相色谱研究药物包封率和体外释放行为。结果:通过调节药物浓度和不同高分子组合筛选出突释小,包封率高且缓慢释放的处方。结论:左旋多巴甲酯包裹于PLGA能实现理想的缓释效果,降低药物浓度波动,为后期药效学实验提供基础。