Morphological Parameters Associated with Ruptured Posterior Communicating Aneurysms

The rupture risk of unruptured intracranial aneurysms is known to be dependent on the size of the aneurysm. However, the association of morphological characteristics with ruptured aneurysms has not been established in a systematic and location specific manner for the most common aneurysm locations. We evaluated posterior communicating artery (PCoA) aneurysms for morphological parameters associated with aneurysm rupture in that location. CT angiograms were evaluated to generate 3-D models of the aneurysms and surrounding vasculature. Univariate and multivariate analyses were performed to evaluate morphological parameters including aneurysm volume, aspect ratio, size ratio, distance to ICA bifurcation, aneurysm angle, vessel angles, flow angles, and vessel-to-vessel angles. From 2005–2012, 148 PCoA aneurysms were treated in a single institution. Preoperative CTAs from 63 patients (40 ruptured, 23 unruptured) were available and analyzed. Multivariate logistic regression revealed that smaller volume (p = 0.011), larger aneurysm neck diameter (0.048), and shorter ICA bifurcation to aneurysm distance (p = 0.005) were the most strongly associated with aneurysm rupture after adjusting for all other clinical and morphological variables. Multivariate subgroup analysis for patients with visualized PCoA demonstrated that larger neck diameter (p = 0.018) and shorter ICA bifurcation to aneurysm distance (p = 0.011) were significantly associated with rupture. Intracerebral hemorrhage was associated with smaller volume, larger maximum height, and smaller aneurysm angle, in addition to lateral projection, male sex, and lack of hypertension. We found that shorter ICA bifurcation to aneurysm distance is significantly associated with PCoA aneurysm rupture. This is a new physically intuitive parameter that can be measured easily and therefore be readily applied in clinical practice to aid in the evaluation of patients with PCoA aneurysms.     

Morphological and Hemodynamic Discriminators for Rupture Status in Posterior Communicating Artery Aneurysms

Background and Purpose

The conflicting findings of previous morphological and hemodynamic studies on intracranial aneurysm rupture may be caused by the relatively small sample sizes and the variation in location of the patient-specific aneurysm models. We aimed to determine the discriminators for aneurysm rupture status by focusing on only posterior communicating artery (PCoA) aneurysms.

Materials and Methods

In 129 PCoA aneurysms (85 ruptured, 44 unruptured), clinical, morphological and hemodynamic characteristics were compared between the ruptured and unruptured cases. Multivariate logistic regression analysis was performed to determine the discriminators for rupture status of PCoA aneurysms.

Results

While univariate analyses showed that the size of aneurysm dome, aspect ratio (AR), size ratio (SR), dome-to-neck ratio (DN), inflow angle (IA), normalized wall shear stress (NWSS) and percentage of low wall shear stress area (LSA) were significantly associated with PCoA aneurysm rupture status. With multivariate analyses, significance was only retained for higher IA (OR = 1.539, p < 0.001) and LSA (OR = 1.393, p = 0.041).

Conclusions

Hemodynamics and morphology were related to rupture status of intracranial aneurysms. Higher IA and LSA were identified as discriminators for rupture status of PCoA aneurysms.     

Correlation Between the Rupture Risk and 3D Geometric Parameters of Saccular Intracranial Aneurysms

The purpose of this study is to evaluate the association of the location and geometric parameters of intracranial aneurysm with the risk of rupture. A retrospective study consisted of 284 patients diagnosed with saccular intracranial aneurysm between January 2009 and May 2013 at Wuxi Third People’s Hospital was conducted. 3D digital subtraction angiography images from all patients (240 ruptured, 44 unruptured) were obtained and analyzed. The location of the aneurysms and the 3D geometric parameters including the aneurysm depth, the neck size, diameter of the parent artery, aneurysm angle, aspect radio, size ratio, and the neck-to-parent-artery ratio (NPR) were compared between ruptured and unruptured groups. Results: In ruptured group, anterior communicating artery, posterior communicating artery (PCoA), and the bifurcation of internal carotid artery (ICA) were the top three locations for aneurysm occurrence, accounting for 40.00, 30.42, and 12.08 % respectively. While in the unruptured group, top three locations were PCoA (36.36 %), posterior cerebral circulation (18.18 %), and the bifurcation of the ICA (15.91 %). Distribution of aneurysm location is significantly different (p < 0.05) between ruptured and unruptured aneurysms. For the 3D geometric parameters characterizing aneurysm, aneurysm depth (p < 0.05), parent artery diameter (p < 0.05), aneurysm angle (p < 0.01), aspect ratio (p < 0.01), and size ratio (p < 0.01) all showed a significant difference between ruptured and unruptured group. No difference was found in the neck size and the NPR ratio between the two groups. 3D geometric parameters such as aneurysm depth, parent artery diameter, aneurysm angle, aspect ratio, and size ratio can be helpful in evaluating the rupture risk of saccular intracranial aneurysm for a better prevention and prognosis.     

Biomechanical wall properties of human intracranial aneurysms resected following surgical clipping (IRRAs Project)

Background and purposeIndividual rupture risk assessment of intracranial aneurysms is a major issue in the clinical management of asymptomatic aneurysms. Aneurysm rupture occurs when wall tension exceeds the strength limit of the wall tissue. At present, aneurysmal wall mechanics are poorly understood and thus, risk assessment involving mechanical properties is inexistent. Aneurysm computational hemodynamics studies make the assumption of rigid walls, an arguable simplification. We therefore aim to assess mechanical properties of ruptured and unruptured intracranial aneurysms in order to provide the foundation for future patient-specific aneurysmal risk assessment. This work also challenges some of the currently held hypotheses in computational flow hemodynamics research.MethodsA specific conservation protocol was applied to aneurysmal tissues following clipping and resection in order to preserve their mechanical properties. Sixteen intracranial aneurysms (11 female, 5 male) underwent mechanical uniaxial stress tests under physiological conditions, temperature, and saline isotonic solution. These represented 11 unruptured and 5 ruptured aneurysms. Stress/strain curves were then obtained for each sample, and a fitting algorithm was applied following a 3-parameter (C₁₀, C₀₁, C₁₁) Mooney–Rivlin hyperelastic model. Each aneurysm was classified according to its biomechanical properties and (un)rupture status.ResultsTissue testing demonstrated three main tissue classes: Soft, Rigid, and Intermediate. All unruptured aneurysms presented a more Rigid tissue than ruptured or pre-ruptured aneurysms within each gender subgroup. Wall thickness was not correlated to aneurysmal status (ruptured/unruptured). An Intermediate subgroup of unruptured aneurysms with softer tissue characteristic was identified and correlated with multiple documented risk factors of rupture.ConclusionThere is a significant modification in biomechanical properties between ruptured aneurysm, presenting a soft tissue and unruptured aneurysms, presenting a rigid material. This finding strongly supports the idea that a biomechanical risk factor based assessment should be utilized in the to improve the therapeutic decision making.     

Posterior Cerebral Artery Angle and the Rupture of Basilar Tip Aneurysms

Since the initial publication of the International Study of Unruptured Intracranial Aneurysms (ISUIA), management of unruptured intracranial aneurysms has been mainly based on the size of the aneurysm. The contribution of morphological characteristics to treatment decisions of unruptured aneurysms has not been well studied in a systematic and location specific manner. We present a large sample of basilar artery tip aneurysms (BTA) that were assessed using a diverse array of morphological variables to determine the parameters associated with ruptured aneurysms. Demographic and clinical risk factors of aneurysm rupture were obtained from chart review. CT angiograms (CTA) were evaluated with Slicer, an open source visualization and image analysis software, to generate 3-D models of the aneurysms and surrounding vascular architecture. Morphological parameters examined in each model included aneurysm volume, aspect ratio, size ratio, aneurysm angle, basilar vessel angle, basilar flow angle, and vessel to vessel angles. Univariate and multivariate analyses were performed to determine statistical significance. From 2008–2013, 54 patients with BTA aneurysms were evaluated in a single institution, and CTAs from 33 patients (15 ruptured, 18 unruptured) were available and analyzed. Aneurysms that underwent reoperation, that were associated with arteriovenous malformations, or that lacked preoperative CTA were excluded. Multivariate logistic regression revealed that a larger angle between the posterior cerebral arteries (P1-P1 angle, p = 0.037) was most strongly associated with aneurysm rupture after adjusting for other morphological variables. In this location specific study of BTA aneurysms, the larger the angle formed between posterior cerebral arteries was found to be a new morphological parameter significantly associated with ruptured BTA aneurysms. This is a physically intuitive parameter that can be measured easily and readily applied in the clinical setting.     

An approach to quantitative assessment of hemodynamic differences between unruptured and ruptured ophthalmic artery aneurysms

Background and purpose: Hemodynamic parameters are important in the pathogenesis, evolution and rupture of intracranial aneurysm. Energy loss (EL) has been applied for the rupture risk prediction of artery aneurysms recently. We proposed a new EL and further investigate its effects on the rupture of aneurysms. Materials and methods: Sixty-four patient-specific ophthalmic aneurysm datasets were divided into ruptured and unruptured groups based on their clinical history. Based on patient-specific 3D-DSA data, realistic models were retrospectively reconstructed and then analyzed by using computational fluid dynamic method. Results: The flow field feature EL in ruptured cases was significantly higher than that in unruptured cases. The average wall shear stress (WSS) and the maximum WSS in ruptured cases were higher than those in unruptured cases. Modified pressure loss coefficient (PLC_M) in ruptured cases was slight higher than that in unruptured cases but the difference has no statistical significance. Multivariate logistic regression analysis demonstrated flow field feature EL (p < 0.05) and the maximum WSS (p < 0.05) were the only independently significant variables to predict rupture of ophthalmic aneurysm. There were no differences in PLC_M, the maximum oscillatory shear index (OSI), the average OSI and AR between the two groups. Conclusion: Flow field feature EL may be a reliable factor to predict the rupture risk of aneurysms.     

Morphometry and hemodynamics of posterior communicating artery aneurysms: Ruptured versus unruptured

Posterior communicating artery (PCoA) aneurysms frequently rupture in small size (<7 mm). The aim of the study is to demonstrate morphometric and hemodynamic analyses in ruptured and unruptured PCoA aneurysms to improve predictive accuracy for rupture. Geometrical models were reconstructed from rotational DSA images of 57 ruptured and 22 unruptured side-wall PCoA aneurysms, which were classified into four two-dimensional (2D) groups by a combination of H/D and H/S ratios (H: dome height, D: dome diameter, and S: semi-axis height). Surface area ratio (SAR) of low time-averaged wall shear stress (TAWSS, ≤4 dynes cm⁻²) and high oscillatory shear index (OSI, ≥0.15) were computed in aneurysms. We hypothesized that a two-step analysis method, i.e., one-dimensionally morphometric and hemodynamic analyses in each 2D group, can enhance accuracy of PCoA aneurysm rupture evaluation. There was the highest incidence of H/D > 1 and H/S ≤ 2 with the largest surface area and SAR-TAWSS, but the lowest incidence of H/D ≤ 1 and H/S > 2 with the smallest surface area and SAR-TAWSS in ruptured PCoA aneurysms. PCoA aneurysms of H/D > 1 and H/S ≤ 2 with surface area > 70 mm², H/D ≤ 1 and H/S > 2 with neck diameter > 2.3 mm, H/D ≤ 1 and H/S ≤ 2 with aneurysmal height/parent diameter ratio > 1.0, and H/D > 1 and H/S > 2 with aneurysmal angle > 115° need special attention for clinical diagnosis and treatment. The study highlighted the importance of the two-step analysis method for clinical evaluation of PCoA aneurysm rupture.     

Analysis of Morphological Parameters to Differentiate Rupture Status in Anterior Communicating Artery Aneurysms

In contrast to size, the association of morphological characteristics of intracranial aneurysms with rupture has not been established in a systematic manner. We present an analysis of the morphological variables that are associated with rupture in anterior communicating artery aneurysms to determine site-specific risk variables. One hundred and twenty-four anterior communicating artery aneurysms were treated in a single institution from 2005 to 2010, and CT angiograms (CTAs) or rotational angiography from 79 patients (42 ruptured, 37 unruptured) were analyzed. Vascular imaging was evaluated with 3D Slicer© to generate models of the aneurysms and surrounding vasculature. Morphological parameters were examined using univariate and multivariate analysis and included aneurysm volume, aspect ratio, size ratio, distance to bifurcation, aneurysm angle, vessel angle, flow angle, and parent-daughter angle. Multivariate logistic regression revealed that size ratio, flow angle, and parent-daughter angle were associated with aneurysm rupture after adjustment for age, sex, smoking history, and other clinical risk factors. Simple morphological parameters such as size ratio, flow angle, and parent-daughter angle may thus aid in the evaluation of rupture risk of anterior communicating artery aneurysms.     

Nonlinear anisotropic stress analysis of anatomically realistic cerebral aneurysms

BACKGROUND: Static deformation analysis and estimation of wall stress distribution of patient-specific cerebral aneurysms can provide useful insights into the disease process and rupture. METHOD OF APPROACH: The three-dimensional geometry of saccular cerebral aneurysms from 27 patients (18 unruptured and nine ruptured) was reconstructed based on computer tomography angiography images. The aneurysm wall tissue was modeled using a nonlinear, anisotropic, hyperelastic material model (Fung-type) which was incorporated in a user subroutine in ABAQUS. Effective material fiber orientations were assumed to align with principal surface curvatures. Static deformation of the aneurysm models were simulated assuming uniform wall thickness and internal pressure load of 100 mm Hg. RESULTS: The numerical analysis technique was validated by quantitative comparisons to results in the literature. For the patient-specific models, in-plane stresses in the aneurysm wall along both the stiff and weak fiber directions showed significant regional variations with the former being higher. The spatial maximum of stress ranged from as low as 0.30 MPa in a small aneurysm to as high as 1.06 MPa in a giant aneurysm. The patterns of distribution of stress, strain, and surface curvature were found to be similar. Sensitivity analyses showed that the computed stress is mesh independent and not very sensitive to reasonable perturbations in model parameters, and the curvature-based criteria for fiber orientations tend to minimize the total elastic strain energy in the aneurysms wall. Within this small study population, there were no statistically significant differences in the spatial means and maximums of stress and strain values between the ruptured and unruptured groups. However, the ratios between the stress components in the stiff and weak fiber directions were significantly higher in the ruptured group than those in the unruptured group. CONCLUSIONS: A methodology for nonlinear, anisotropic static deformation analysis of geometrically realistic aneurysms was developed, which can be used for a more accurate estimation of the stresses and strains than previous methods and to facilitate prospective studies on the role of stress in aneurysm rupture.     

Influence of morphology and hemodynamic factors on rupture of multiple intracranial aneurysms: matched-pairs of ruptured-unruptured aneurysms located unilaterally on the anterior circulation

Background

The authors evaluated the impact of morphological and hemodynamic factors on the rupture of matched-pairs of ruptured-unruptured intracranial aneurysms on one patient’s ipsilateral anterior circulation with 3D reconstruction model and computational fluid dynamic method simulation.

Methods

20 patients with intracranial aneurysms pairs on the same-side of anterior circulation but with different rupture status were retrospectively collected. Each pair was divided into ruptured-unruptured group. Patient-specific models based on their 3D-DSA images were constructed and analyzed. The relative locations, morphologic and hemodynamic factors of these two groups were compared.

Results

There was no significant difference in the relative bleeding location. The morphological factors analysis found that the ruptured aneurysms more often had irregular shape and had significantly higher maximum height and aspect ratio. The hemodynamic factors analysis found lower minimum wall shear stress (WSSmin) and more low-wall shear stress-area (LSA) in the ruptured aneurysms than that of the unruptured ones. The ruptured aneurysms more often had WSSmin on the dome.

Conclusions

Intracranial aneurysms pairs with different rupture status on unilateral side of anterior circulation may be a good disease model to investigate possible characteristics linked to rupture independent of patient characteristics. Irregular shape, larger size, higher aspect ratio, lower WSSmin and more LSA may indicate a higher risk for their rupture.

     

Realistic non-Newtonian viscosity modelling highlights hemodynamic differences between intracranial aneurysms with and without surface blebs

Most computational fluid dynamic (CFD) simulations of aneurysm hemodynamics assume constant (Newtonian) viscosity, even though blood demonstrates shear-thinning (non-Newtonian) behavior. We sought to evaluate the effect of this simplifying assumption on hemodynamic forces within cerebral aneurysms, especially in regions of low wall shear stress, which are associated with rupture. CFD analysis was performed for both viscosity models using 3D rotational angiography volumes obtained for 26 sidewall aneurysms (12 with blebs, 12 ruptured), and parametric models incorporating blebs at different locations (inflow/outflow zone). Mean and lowest 5% values of time averaged wall shear stress (TAWSS) computed over the dome were compared using Wilcoxon rank-sum test. Newtonian modeling not only resulted in higher aneurysmal TAWSS, specifically in areas of low flow and blebs, but also showed no difference between aneurysms with or without blebs. In contrast, for non-Newtonian analysis, bleb-bearing aneurysms showed significantly lower 5% TAWSS compared to those without (p=0.005), despite no significant difference in mean dome TAWSS (p=0.32). Non-Newtonian modeling also accentuated the differences in dome TAWSS between ruptured and unruptured aneurysms (p<0.001). Parametric models further confirmed that realistic non-Newtonian viscosity resulted in lower bleb TAWSS and higher focal viscosity, especially when located in the outflow zone. The results show that adopting shear-thinning non-Newtonian blood viscosity in CFD simulations of intracranial aneurysms uncovered hemodynamic differences induced by bleb presence on aneurysmal surfaces, and significantly improved discriminant statistics used in risk stratification. These findings underline the possible implications of using a realistic model of blood viscosity in predictive computational hemodynamics.     

Impact of stents and flow diverters on hemodynamics in idealized aneurysm models

Cerebral aneurysms constitute a major medical challenge as treatment options are limited and often associated with high risks. Statistically, up to 3% of patients with a brain aneurysm may suffer from bleeding for each year of life. Eight percent of all strokes are caused by ruptured aneurysms. In order to prevent this rupture, endovascular stenting using so called flow diverters is increasingly being regarded as an alternative to the established coil occlusion method in minimally invasive treatment. Covering the neck of an aneurysm with a flow diverter has the potential to alter the hemodynamics in such a way as to induce thrombosis within the aneurysm sac, stopping its further growth, preventing its rupture and possibly leading to complete resorption. In the present study the influence of different flow diverters is quantified considering idealized patient configurations, with a spherical sidewall aneurysm placed on either a straight or a curved parent vessel. All important hemodynamic parameters (exchange flow rate, velocity, and wall shear stress) are determined in a quantitative and accurate manner using computational fluid dynamics when varying the key geometrical properties of the aneurysm. All simulations are carried out using an incompressible, Newtonian fluid with steady conditions. As a whole, 72 different cases have been considered in this systematic study. In this manner, it becomes possible to compare the efficiency of different stents and flow diverters as a function of wire density and thickness. The results show that the intra-aneurysmal flow velocity, wall shear stress, mean velocity, and vortex topology can be considerably modified thanks to insertion of a suitable implant. Intra-aneurysmal residence time is found to increase rapidly with decreasing stent porosity. Of the three different implants considered in this study, the one with the highest wire density shows the highest increase of intra-aneurysmal residence time for both the straight and the curved parent vessels. The best hemodynamic modifications are always obtained for a small aneurysm diameter.     

Aneurysm Characteristics Associated with the Rupture Risk of Intracranial Aneurysms: A Self-Controlled Study

This study analyzed the rupture risk of intracranial aneurysms (IAs) according to aneurysm characteristics by comparing the differences between two aneurysms in different locations within the same patient. We utilized this self-controlled model to exclude potential interference from all demographic factors to study the risk factors related to IA rupture. A total of 103 patients were diagnosed with IAs between January 2011 and April 2015 and were enrolled in this study. All enrolled patients had two IAs. One IA (the case) was ruptured, and the other (the control) was unruptured. Aneurysm characteristics, including the presence of a daughter sac, the aneurysm neck, the parent artery diameter, the maximum aneurysm height, the maximum aneurysm width, the location, the aspect ratio (AR, maximum perpendicular height/average neck diameter), the size ratio (SR, maximum aneurysm height/average parent diameter) and the width/height ratio (WH ratio, maximum aneurysm width/maximum aneurysm height), were collected and analyzed to evaluate the rupture risks of the two IAs within each patient and to identify the independent risk factors associated with IA rupture. Multivariate, conditional, backward, stepwise logistic regression analysis was performed to identify the independent risk factors associated with IA rupture. The multivariate analysis identified the presence of a daughter sac (odds ratio [OR], 13.80; 95% confidence interval [CI], 1.65–115.87), a maximum aneurysm height ≥7 mm (OR, 4.80; 95% CI, 1.21–18.98), location on the posterior communicating artery (PCOM) or anterior communicating artery (ACOM; OR, 3.09; 95% CI, 1.34–7.11) and SR (OR, 2.13; 95% CI, 1.16–3.91) as factors that were significantly associated with IA rupture. The presence of a daughter sac, the maximum aneurysm height, PCOM or ACOM locations and SR (>1.5±0.7) of unruptured IAs were significantly associated with IA rupture.     

Survivors of ruptured abdominal aortic aneurysm: the iceberg's tip.

In four and a half years 25 patients in one community suffered a ruptured abdominal aortic aneurysm. Eleven died at home, nine died without operation in hospital, and only five had the aneurysm removed. There were four survivors. A further seven patients might have lived had they had a prompt operation. The average operative mortality for ruptured aneurysms among series reported in British journals is 53%, but the survivors are a small minority of the total number of people in the community whose aneurysms rupture. No basis could be found for the view that replacing an aortic aneurysm with a straight graft (while leaving behind aneurysmal common iliac arteries) lowers the operative mortality. On the contrary, oversimplifying the operation may be hazardous.     

Automated methodology for determination of stress distribution in human abdominal aortic aneurysm

Knowledge of impending abdominal aortic aneurysm (AAA) rupture can help in surgical planning. Typically, aneurysm diameter is used as the indicator of rupture, but recent studies have hypothesized that pressure-induced biomechanical stress may be a better predictor Verification of this hypothesis on a large study population with ruptured and unruptured AAA is vital if stress is to be reliably used as a clinical prognosticator for AAA rupture risk. We have developed an automated algorithm to calculate the peak stress in patient-specific AAA models. The algorithm contains a mesh refinement module, finite element analysis module, and a postprocessing visualization module. Several aspects of the methodology used are an improvement over past reported approaches. The entire analysis may be run from a single command and is completed in less than 1 h with the peak wall stress recorded for statistical analysis. We have used our algorithm for stress analysis of numerous ruptured and unruptured AAA models and report some of our results here. By current estimates, peak stress in the aortic wall appears to be a better predictor of rupture than AAA diameter. Further use of our algorithm is ongoing on larger study populations to convincingly verify these findings.     

A fluid–structure interaction study using patient-specific ruptured and unruptured aneurysm: The effect of aneurysm morphology,hypertension and elasticity

Fluid–structure interaction (FSI) simulations using five patient-specific aneurysm geometries are carried out to investigate the difference between ruptured and unruptured aneurysms.     

An Analysis of 1256 Cases of Sporadic Ruptured Cerebral Aneurysm in a Single Chinese Institution

Background

To review the epidemiology of sporadic ruptured cerebral aneurysm.

Methods

This is a retrospective study of consecutive 1256 Chinese patients between January 2006 and January 2013, who were admitted to the Second Hospital of Hebei Medical University, China, for spontaneous subarachnoid hemorrhage due to a rupture of cerebral artery aneurysm. In 288 males and 478 females, the size of aneurysms was measured by a neuroradiologist on DSA. In 123 males and 184 females, the size of the ruptured aneurysms was not measured. The remaining patients, with 61 males and 122 females, had multiple aneurysms, and the medical record could not reliably determine the specific aneurysm responsible for the rupture.

Results

In total there were 784 females and 472 males with a female/male ratio of 1.66. The female/male ratio was down to 0.50 for patients younger than 35 yrs. For both males and females, aneurysm rupture was most common during the age of 50–59 yrs. Ruptured aneurysms were mostly of 2 mm–5 mm in size (47.1%), followed by 5 mm–10 mm (39.7%). Ruptured single cerebral aneurysm occurred in anterior circulation in 95.0% of the cases, with 5.0% occurred in posterior circulation. Ruptured aneurysm most commonly occurred at posterior communicating artery (34.9%) and anterior communicating artery (29.5%). 183 cases (14.6%) had multiple aneurysms.

Conclusions

With younger patients, there is a male predominance in our series. Ninety percent of patients have ruptured aneurysms less than 10 mm in size.     

Abdominal aortic aneurysms: recent experience with 210 patients.

In the 6 1/2 years ending June 1977, 210 patients with abdominal aortic aneurysms underwent operation at Toronto Western Hospital; 160 aneurysms (76%) were unruptured and 50 (24%) were ruptured. In the patients with unruptured aneurysms the mean age was 68 years; the oldest was 91, and 12 were more than 80 years of age. The overall hospital mortality was 5.6%. Death in hospital occurred in 1 (1.2%) of the 83 asymptomatic patients, 4 (7.4%) of the 54 symptomatic patients and 4 (17.0%) of the 23 patients for whom operation was considered urgent. In the patients with ruptured aneurysms the mean age was 71 years; the oldest was 90, and five were more than 80 years of age. The overall hospital mortality was 54%. The morbidity and mortality were analysed; in particular the reasons for the markedly variable hazard of operations for the three categories of unruptured aneurysm were sought. The surgical literature is confusing because of the interchanging use of the words unruptured, elective and symptomless. The current philosophy management and technique of operation in a large cardiovascular surgery service with many trainees are presented and a plea is made for a standardized and simplified operation, always performed with three assistants helping the operating surgeon.     

High-resolution computational fluid dynamics detects flow instabilities in the carotid siphon: Implications for aneurysm initiation and rupture?

The carotid siphon is by nature a tortuous vessel segment with sharp bends and large area variations, and of relevance to the study of intracranial aneurysm initiation and rupture. The aim of this paper was to determine whether the siphon might harbor flow instabilities, if care is taken to resolve them. This study focused on five consecutive internal carotid artery (ICA) aneurysm cases from the open-source Aneurisk dataset. The aneurysm, always downstream of the siphon, was digitally removed using previously developed and verified tools. Computational fluid dynamic (CFD) models included long cervical segments upstream, and middle and anterior cerebral arteries downstream. High-resolution pulsatile simulations were performed using the equivalent of ~24$~24$ million linear tetrahedra on average (range 16-32 M) and 30,000 time-steps/cycle. Two of the five cases were laminar with mild flow instabilities right after peak systole. One of the cases experienced strong periodic vortex shedding at a frequency of around 100 Hz. The remaining two cases harbored higher frequency flow instabilities and complex 3D vortical structures, extending to the cerebral arteries downstream. Our findings suggest that the carotid siphon, a conduit to the majority of anterior intracranial aneurysms, may experience flow instabilities, consistent with in vitro reports, but seemingly at odds with the majority of CFD studies, which have been done at lower resolutions. This has obvious implications for elucidating the forces involved in aneurysm initiation; and propagation of flow instabilities into ICA or downstream aneurysms could also impact understanding of the forces involved in aneurysm rupture.