Excision of a DNA sequence determining kanamycin resistance from a ColE1-Km recombinant plasmid

Summary A 4.8×10⁶ dalton ECoRI-generated fragment of the R-factor R6-5 carrying the gene for kanamycin resistance (Km) was joined in vitro to ECoRI-treated ColE1 plasmid DNA. Transformation ofE. coli with the ColE1-Km recombinant plasmid yielded clones, which were immune to colicin E1, resistant to kanamycin and failed to produce colicin E1. During multiplication of this recombinant plasmid in the presence of chloramphenicol, cells expressed an increased resistance to kanamycin. Transformation studies with the recombinant DNA molecule showed very frequent loss of Km resistance in those cells harbouring a preexisting F'gal plasmid. Since colicin immunity is not affected and the col^- phenotype is still present, one has to test for a remaining DNA sequence further existing in ColE1 DNA by cleaving the plasmid DNA with the ECoRI restriction endonuclease. The full length of ColE1 DNA (6.2 kb) was restored, which confirmed that no deletion of ColE1 DNA sequences had occured. The remaining DNA sequence was identified as a 2.0 or 2.2 kb segment. On the basis of the length of the excised fragment it is proposed that the insertion sequence IS1 and a part of the inverted repeat sequence with coordinates 21.0 to 22.0 of the R6-5 DNA are recognised by a nucleolytic function.     

Denaturation map of the ColE1-Km plasmid pCR11.

The denaturation map of EcoRI-digested pCR11, a ColE1-Km plasmid, is described. The 2.0 kilobase ColE1-derived segment contains an adenine+thymine rich site in the colicin immunity gene region. In the 7.2 kilobase kanamycin resistance region, the transposon Tn903 consists of an adenine+thymine rich 0.98 kilobase kan gene region flanked by a guanine+cytosine rich 1.09 kilobase inverted duplication.     

Transposition of a DNA sequence determining kanamycin resistance into the single-stranded genome of bacteriophage fd

Summary Derivatives of bacteriophages fd which transduce kanamycin resistance were selected after growth of the phage in an E. coli strain that carried transposon 5 (Tn5). Different clones of transducing phage and their DNAs were characterized by gel electrophoresis, electron microscopy, and by their ability to multiply in the absence of helper phage. Integration of the intact transposon into the full size phage genome was correlated with an increase in size of the phage particle from 0.95 to 1.7 , and with the appearance in the phage DNA of the stem loop structure characteristic for single-stranded Tn5 DNA. In nondefective phages the site of insertion was mapped by heteroduplex analysis within the intergenic region of the phage genome. Defective transducing phages were characterized as an insertion of Tn5 into a phage gene, and/or as a partial deletion or duplication of phage and transposon DNA. The size of the transducting phage from different defective clones varied from 0.6 to 3.0 and was directly proportional to the DNA content. These results demonstrate that filamentous bacteriophage are highly capable to replicate and package very different amounts of foreign DNA.This work was presented at the EMBO Workshop on single-stranded DNA viruses, October 1976, Harpert, The Netherlands     

Evolution of antibiotic resistance genes: the DNA sequence of a kanamycin resistance gene from Staphylococcus aureus

The kanamycin resistance gene from Staphylococcus aureus has been sequenced and its structure compared with similar genes isolated from Streptomyces fradiae and from two transposons, Tn5 and Tn903, originally isolated from Klebsiella pneumoniae and Salmonella typhimurium, respectively. The genes are all homologous but, since their common ancestor, have undergone extensive divergence, with more than 43% divergence between the closest pair. The phylogeny of the genes cannot be made congruent to the phylogeny of the taxa from which they were isolated without requiring rather improbable differences in rates. One is therefore led to conclude that there have been multiple occurrences of gene transfer between these species. Thus, although they are homologous, they are neither orthologous nor paralogous. It is suggested that homologous genes of this type be called xenologous.      

Processing of plasmid DNA with ColE1-like replication origin

With the increasing utilization of plasmid DNA as a biopharmaceutical drug, there is a rapidly growing need for high quality plasmid DNA for drug applications. Although there are several different kinds of replication origins, ColE1-like replication origin is the most extensively used origin in biotechnology. This review addresses problems in upstream and downstream processing of plasmid DNA with ColE1-like origin as drug applications. In upstream processing of plasmid DNA, regulation of replication of ColE1-like origin was discussed. In downstream processing of plasmid DNA, we analyzed simple, robust, and scalable methods, which can be used in the efficient production of pharmaceutical-grade plasmid DNA.     

Nucleotide sequence and gene organization of ColE1 DNA

The primary structure of the plasmid ColE1 DNA has been determined. The plasmid DNA consists of 6646 base pairs (molecular mass of 4.43 MDa) and is 48.46% in GC content. The phi 80 trp insert of the composite plasmid of ColE1, pVH51, has also been determined. The determination of the nucleotide sequence of ColE1 DNA provides the basis for examining the relationships between the DNA sequence and the gene organization of the plasmid. The focus of this paper is to use this sequence data coupled with a review of the literature and our own work to examine the nine known functional regions of ColE1: imm (colicin E1 immunity), rep (replication function), inc (plasmid incompatibility and copy number control), bom (basis of mobility), rom (modulator of inhibition of primer formation by RNA I), mob (plasmid mobilization), cer (determinant for conversion of plasmid multimers to monomers), exc (plasmid entry exclusion), cea (structural gene for colicin E1), and kil (structural gene for the Kil protein).     

Adenosine monophosphate-induced amplification of ColE1 plasmid DNA in Escherichia coli

ColE1 plasmid copy number was analyzed in relaxed (relA) and stringent (relA(+)) Escherichia coli cells after supplementation of culture media with adenosine monophosphate (AMP). When a relaxed E. coli strain bearing ColE1 plasmid was cultured in LB medium for 18 h and induced with AMP for 4h, the plasmid DNA yield was significantly increased, from 2.6 to 16.4 mgl(-1). However no AMP-induced amplification of ColE1 plasmid DNA was observed in the stringent host. Some plasmid amplification was observed in relA mutant cultures in the presence of adenosine, while adenine, ADP, ATP, ribose, potassium pyrophosphate and sodium phosphate caused a minor, if any, increase in ColE1 copy number. A mechanism for amplification of ColE1 plasmid DNA with AMP in relA mutant bacteria is suggested, in which AMP interferes with the aminoacylation of tRNAs, increases the abundance of uncharged tRNAs, and uncharged tRNAs promote plasmid DNA replication. According to this proposal, in relA(+) cells, the AMP induction could not increase ColE1 plasmid copy number because of lower abundance of uncharged tRNAs. Our results suggest that the induction with AMP can be used as an effective method of amplification of ColE1 plasmid DNA in relaxed strains of E. coli.     

Equilibrium melting of plasmid ColE1 DNA: electron-microscopic visualization.

The fine structure of the melting curve for the linear colE1 DNA has been obtained. To find the ColE1 DNA regions corresponding to peaks in the melting curve's fine structure, we fixed the melted DNA regions with glyoxal /12/. Electron-microscopic denaturation maps were obtained for nine temperature points within the melting range. Thereby the whole process of colE1 DNA melting was reconstructed in detail. Spectrophotometric and electron microscopic data were used for mapping the distribution of Gc-pairs over the DNA molecule. The most AT-rich DNA regions (28 and 37% of GC-pairs), 380 and 660 bp long resp., are located on both sides of the site of ColE1 DNA's cleavage by EcoR1 endonuclease. The equilibrium denaturation maps are compared with maps obtained by the method of Inman /20/ for eight points of the kinetic curve of ColE1 DNA unwinding by formaldehyde.     

A functional map of plasmid ColE1

Summary Examination of the properties of ColE1 derivatives containing either deletions or insertions of transposable genetic elements, has enabled a functional map of plasmid ColE1 to be constructed.     

Synthesis and repair of RNA-containing supercoiled plasmid ColE1 DNA in Escherichia coli

Supercoiled plasmid molecules sensitive to nicking by RNase or alkali have been shown to accumulate during replication of colicinogenic factor E1 (ColE1) in Escherichia coli in the presence of chloramphenicol. The possibility that this sensitivity is due to the covalent integration of RNA molecules during the synthesis of plasmid DNA is supported by the demonstration that (a) strands of supercoiled ColE1 newly replicated in the presence of chloramphenicol exhibit sensitivity to RNase and alkali treatment, while (b) RNase- and alkali-resistant circular strands of plasmid DNA synthesized either before or after the addition of chloramphenicol remain resistant during subsequent replication of the plasmid in the presence of chloramphenicol. Furthermore, newly made plasmid DNA strands cannot act as templates for further rounds of replication if they possess an RNA segment. The existence of a repair mechanism for the removal of the RNA segment from supercoiled ColE1 DNA molecules was demonstrated by pulse-chase experiments. It was observed that the proportion of RNase-sensitive molecules is considerably higher in pulse-labeled as compared to continuously labeled ColE1 DNA synthesized in the presence of chloramphenicol, and the proportion of pulse-labeled ColE1 DNA that is RNase sensitive is greatly reduced during a chase period. Removal of the RNA segment is also carried out effectively at the restrictive temperature in temperature-sensitive DNA polymerase I mutants. In a survey of other bacterial mutants defective in the repair of damaged DNA, a substantial increase in the rate of accumulation of RNase-and alkali-sensitive supercoiled ColE1 DNA in the presence of chloramphenicol was observed in recBC and uvrA mutants in comparison with the wild-type strains.     

cea-kil operon of the ColE1 plasmid.

We isolated a series of Tn5 transposon insertion mutants and chemically induced mutants with mutations in the region of the ColE1 plasmid that includes the cea (colicin) and imm (immunity) genes. Bacterial cells harboring each of the mutant plasmids were tested for their response to the colicin-inducing agent mitomycin C. All insertion mutations within the cea gene failed to bring about cell killing after mitomycin C treatment. A cea- amber mutation exerted a polar effect on killing by mitomycin C. Two insertions beyond the cea gene but within or near the imm gene also prevented the lethal response to mitomycin C. These findings suggest the presence in the ColE1 plasmid of an operon containing the cea and kil genes whose product is needed for mitomycin C-induced lethality. Bacteria carrying ColE1 plasmids with Tn5 inserted within the cea gene produced serologically cross-reacting fragments of the colicin E1 molecule, the lengths of which were proportional to the distance between the insertion and the promoter end of the cea gene.     

pUb6060: a broad-host-range, DNA polymerase-I-independent ColE2-like plasmid

A ColE2-like, cryptic plasmid, pUB6060, of 5.8 kb has been found in a clinical isolate of Plesiomonas shigelloides. The complete sequence of pUB6060 has been determined and reveals a number of interesting features about the plasmid. The ColE2-like replication locus is linked to a functional ColE1-like mobilization locus. Replication is, unusually for ColE2 replicons, DNA polymerase-I-independent and may involve two, rather than the usual one, plasmid-encoded functions. Additionally, it carries two ORFs encoding products of unknown function. The pUB6060 replicon maintains a moderate plasmid copy number (10 per chromosome copy) and permits replication in diverse gram-negative bacteria.     

E. coli phosphofructokinase synthesized in vitro from a ColE1 hybrid plasmid.

A hybrid plasmid, pLC 16-4, from the ColE1-DNA (E. coli) bank of Clarke and Carbon (1976) carrying pfkA was used to program an in vitro protein synthesis system from E. coli. Phosphofructokinase was the main product, as determined by enzyme assay, immunoprecipitation and gel electrophoresis. The enzyme was synthesized in vitro without added cAMP at a rate (enzyme/genome/h) ca. 30% the in vivo value, a higher efficiency than usually found in cell free systems. The plasmic molecular weight is ca. 16.10(6) daltons.     

In vitro replication and mutagenesis of ColE1 plasmid DNA in extracts from repair deficient Escherichia coli mutants

We have investigated conditions in vitro for the analysis of replication of ultraviolet-irradiated ColE1 DNA in cell extracts from Escherichia coli. In wild-type extracts substantial replication was obtained; however, this could be greatly reduced when the irradiated plasmid was incubated in extracts prepared from a uvrA recB strain. Modest stimulation of DNA replication was then obtained by addition of extracts from the same strain previously ultraviolet-irradiated. However, this stimulating activity proved to be highly unstable and has so far proved unsuitable as a basis for purification of specific factors involved in replication on irradiated templates. We also investigated the mutagenesis of pBR325 DNA replicated in cell extracts from a strain expressing the SOS response constitutively. Conditions for efficient recovery and transformation by plasmid DNA replicated in vitro were determined and, using this system, a more than 10-fold increase in reversion frequency of a mutation in the tet gene, compared to that with wild-type extracts, was obtained. This mutagenesis appeared to be independent of replication, indicating the presence of an error-prone repair system in the extract. This effect was not enhanced by the presence of the muc gene products in the extracts. This suggests that the observed mutagenesis is also independent of the lexA-controlled umuCD genes.