The role of secondary structure in the entropically driven amelogenin self-assembly

Amelogenin, the major extracellular enamel matrix protein, plays critical roles in controlling enamel mineralization. This generally hydrophobic protein self-assembles to form nanosphere structures under certain solution conditions. To gain clearer insight into the mechanisms of amelogenin self-assembly, we first investigated the occurrences of secondary structures within its sequence. By applying isothermal titration calorimetry (ITC), we determined the thermodynamic parameters associated with protein-protein interactions and with conformational changes during self-assembly. The recombinant porcine full length (rP172) and a truncated amelogenin lacking the hydrophilic C-terminal (rP148) were used. Circular dichroism (CD) measurements performed at low concentrations (<5 microM) revealed the presence of the polyproline-type II (PPII) conformation in both amelogenins in addition to alpha-helix and unordered conformations. Structural transition from PPII/unordered to beta-sheet was observed for both proteins at higher concentrations (>62.5 microM) and upon self-assembly. ITC measurements indicated that the self-assembly of rP172 and rP148 is entropically driven (+DeltaS(A)) and energetically favorable (-DeltaG(A)). The magnitude of enthalpy (DeltaH(A)) and entropy changes of assembly (DeltaS(A)) were smaller for rP148 than rP172, whereas the Gibbs free energy change of assembly (DeltaG(A)) was not significantly different. It was found that rP172 had higher PPII content than rP148, and the monomer-multimer equilibrium for rP172 was observed in a narrower protein concentration range when compared to rP148. The large positive enthalpy and entropy changes in both cases are attributed to the release of ordered water molecules and the associated entropy gain (due to the hydrophobic effect). These findings suggest that PPII conformation plays an important role in amelogenin self-assembly and that rP172 assembly is more favorable than rP148. The data are direct evidence for the notion that hydrophobic interactions are the main driving force for amelogenin self-assembly.     

Changes in the quaternary structure of amelogenin when adsorbed onto surfaces

Amelogenin is a unique protein that self‐assembles into spherical aggregates called “nanospheres” and is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin onto substrates is of great interest because protein‐surface interactions are critical to its function. We report studies of the adsorption of amelogenin onto self‐assembled monolayers containing COOH end group functionality as well as single crystal fluoroapatite, a biologically relevant surface. We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as dimers or trimers were observed on the hydrophilic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that “shed” or disassemble from the nanospheres that are present in solution. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 103–107, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effects of phosphorylation on the self-assembly of native full-length porcine amelogenin and its regulation of calcium phosphate formation in vitro

The self-assembly of the predominant extracellular enamel matrix protein amelogenin plays an essential role in regulating the growth and organization of enamel mineral during early stages of dental enamel formation. The present study describes the effect of the phosphorylation of a single site on the full-length native porcine amelogenin P173 on self-assembly and on the regulation of spontaneous calcium phosphate formation in vitro. Studies were also conducted using recombinant non-phosphorylated (rP172) porcine amelogenin, along with the most abundant amelogenin cleavage product (P148) and its recombinant form (rP147). Amelogenin self-assembly was assessed using dynamic light scattering (DLS) and transmission electron microscopy (TEM). Using these approaches, we have shown that self-assembly of each amelogenin is very sensitive to pH and appears to be affected by both hydrophilic and hydrophobic interactions. Furthermore, our results suggest that the phosphorylation of the full-length porcine amelogenin P173 has a small but potentially important effect on its higher-order self-assembly into chain-like structures under physiological conditions of pH, temperature, and ionic strength. Although phosphorylation has a subtle effect on the higher-order assembly of full-length amelogenin, native phosphorylated P173 was found to stabilize amorphous calcium phosphate for extended periods of time, in sharp contrast to previous findings using non-phosphorylated rP172. The biological relevance of these findings is discussed.     

The effect of recombinant mouse amelogenins on the formation and organization of hydroxyapatite crystals in vitro

Amelogenin is the most abundant protein in developing dental enamel. It is believed to play an important role in the regulation of the growth and organization of enamel crystals. Amelogenin, unlike many other proteins found in biominerals, is mostly hydrophobic except for a 13 amino acid hydrophilic C-terminal domain. To clarify the role of amelogenin in enamel mineralization, we designed calcium phosphate crystal growth experiments in the presence of recombinant amelogenins with or without the charged C-terminal domain. The shape and organization of the crystals were examined by TEM in bright field and diffraction modes. It was found that both full-length and truncated amelogenin inhibit crystal growth in directions normal to the c-axis. At the same time, crystallites organized into parallel arrays only in the presence of the full-length amelogenin in monomeric form. Pre-assembled amelogenins had no effect on crystals organization. These results imply that the hydrophobic portion of amelogenin plays a role in an inhibition of crystal growth, whereas the C-terminal domain is essential for the alignment of crystals into parallel arrays. Our data also suggest that nascent enamel structure emerges as a result of cooperative interactions between forming crystals and assembling proteins.     

Amelogenin "nanorods" formation during proteolysis by Mmp-20

Amelogenin is cleaved by enamelysin (Mmp-20) soon after its secretion, and the cleavage products accumulate in specific locations during enamel formation, suggesting that parent amelogenin proteolysis is necessary for activating its functions. To investigate the precise roles of Mmp-20 and its influence on the assembly of amelogenin, an in vitro enzymatic digestion process mimicking the initial stages of amelogenin proteolysis was investigated at near-physiological conditions using recombinant porcine amelogenin (rP172) and enamelysin. Hierarchically organized nanorod structures formed during different digestion stages were detected by TEM. At the earliest stage, uniformly dispersed parent amelogenin spherical particles, mixed with some darker stained smaller spheres, and accompanying elongated chain-like nanostructures were observed. Cylindrical nanorods, which appeared to be the result of tight assembly of thin subunit cylindrical discs with thicknesses ranging from ∼2.5 to ∼6.0 nm, were formed after an hour of proteolysis. These subunit building blocks stacked to form nanorods with maximum length of ∼100 nm. With the production of more cleavage products, additional morphologies spontaneously evolved from the cylindrical nanorods. Larger ball-like aggregates ultimately formed at the end of proteolysis. The uniform spherical particles, nanorods, morphological patterns evolved from nanorods, and globular aggregated microstructures were successively formed by means of co-assembly of amelogenin and its cleavage products during a comparatively slow proteolysis process. We propose that, following the C-terminal cleavage of amelogenin, co-assembly with its fragments leads to formation of nanorod structures whose properties eventually dictate the super-structural organization of enamel matrix, controlling the elongated growth of enamel apatite crystals.     

Interactions of amelogenin with phospholipids

Amelogenin protein has the potential to interact with other enamel matrix proteins, mineral, and cell surfaces. We investigated the interactions of recombinant amelogenin rP172 with small unilamellar vesicles as model membranes, toward the goal of understanding the mechanisms of amelogenin–cell interactions during amelogenesis. Dynamic light scattering (DLS), fluorescence spectroscopy, circular dichroism (CD), and nuclear magnetic resonance (NMR) were used. In the presence of phospholipid vesicles, a blue shift in the Trp fluorescence emission maxima of rP172 was observed (～334 nm) and the Trp residues of rP172 were inaccessible to the aqueous quencher acrylamide. DLS studies indicated complexation of rP172 and phospholipids, although the possibility of fusion of phospholipids following amelogenin addition cannot be ruled out. NMR and CD studies revealed a disorder–order transition of rP172 in a model membrane environment. Strong fluorescence resonance energy transfer from Trp in rP172 to DNS‐bound‐phospholipid was observed, and fluorescence polarization studies indicated that rP172 interacted with the hydrophobic core region of model membranes. Our data suggest that amelogenin has ability to interact with phospholipids and that such interactions may play key roles in enamel biomineralization as well as reported amelogenin signaling activities. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 96–108, 2015.     

Truncated amelogenin and LRAP transgenes improve Amelx null mouse enamel

Amelogenin is the most abundant enamel protein involved in enamel mineralization. Our goal was to determine whether all three regions of amelogenin (N-terminus, C-terminus, central core) are required for enamel formation. Amelogenin RNA is alternatively spliced, resulting in at least 16 different amelogenin isoforms in mice, with M180 and LRAP expressed most abundantly. Soon after secretion by ameloblasts, M180 is cleaved by MMP20 resulting in C-terminal truncated (CTRNC) amelogenin. We aimed to determine whether the 2 transgenes (Tg), LRAP and CTRNC together, can improve LRAPTg/Amelx −/− and CTRNCTg/Amelx −/− enamel thickness and prism organization, which were not rescued in Amelx −/− enamel. We generated CTRNCTg/LRAPTg/Amelx −/− mice and analyzed developing and mature incisor and molar enamel histologically, by microCT, SEM and microhardness testing. CTRNCTg and LRAPTg overexpression together significantly improved the enamel phenotype of LRAPTg/Amelx −/− and CTRNCTg/Amelx −/− mouse enamel, however enamel microhardness was recovered only when M180Tg was expressed, alone or with LRAPTg. We determined that both LRAP and CTRNC, which together express all three regions of the amelogenin protein (N-terminus, C-terminus and hydrophobic core) contribute to the final enamel thickness and prism organization in mice.     

Interaction between the enamel matrix proteins amelogenin and ameloblastin

Enamel matrix consists of amelogenin and non-amelogenins. Though amelogenin is not involved in nucleation of minerals, the enamel mineralization is impaired when amelogenin or other matrix protein (ameloblastin/enamelin) genes are mutated. We hypothesize that amelogenin may promote enamel mineralization by interacting with the calcium-binding matrix proteins. Specific binding of amelogenin to N-acetylglucosamine (GlcNAc), GlcNAc-mimicking peptides (GMps), and their carrier proteins and the identification of amelogenin-trityrosyl-motif-peptide (ATMP) as a GlcNAc/GMp-binding domain in amelogenin favor the hypothesis. This study tested the interaction of amelogenin with ameloblastin, a carrier of GMp sequence at intermittent sites. Neither GlcNAc nor sialic acids were identified in the recombinant-ameloblastin. Amelogenin bound to recombinant-ameloblastin in both Western blots and in ELISA. More specifically, [(3)H]ATMP bound to both recombinant and native ameloblastins. Dosimetry and Scatchard analyses showed the specific interaction between ATMP and ameloblastin, suggesting that amelogenin may interact with ameloblastin to form a heteromolecular assembly.     

Self‐assembly of short peptides composed of only aliphatic amino acids and a combination of aromatic and aliphatic amino acids

The morphology of structures formed by the self‐assembly of short N‐terminal t‐butyloxycarbonyl (Boc) and C‐terminal methyl ester (OMe) protected and Boc‐deprotected hydrophobic peptide esters was investigated. We have observed that Boc‐protected peptide esters composed of either only aliphatic hydrophobic amino acids or aliphatic hydrophobic amino acids in combination with aromatic amino acids, formed highly organized structures, when dried from methanol solutions. Transmission and scanning electron microscopic images of the peptides Boc‐Ile‐Ile‐OMe, Boc‐Phe‐Phe‐Phe‐Ile‐Ile‐OMe and Boc‐Trp‐Ile‐Ile‐OMe showed nanotubular structures. Removal of the Boc group resulted in disruption of the ability to form tubular structures though spherical aggregates were formed. Both Boc‐Leu‐Ile‐Ile‐OMe and H‐Leu‐Ile‐Ile‐OMe formed only spherical nanostructures. Dynamic light scattering studies showed that aggregates of varying dimensions were present in solution suggesting that self‐assembly into ordered structures is facilitated by aggregation in solution. Fourier transform infrared spectroscopy and circular dichroism spectroscopy data show that although all four of the protected peptides adopt well‐defined tertiary structures, upon removal of the Boc group, only H‐Phe‐Phe‐Phe‐Ile‐Ile‐OMe had the ability to adopt β‐structure. Our results indicate that hydrophobic interaction is a very important determinant for self‐assembly and presence of charged and aromatic amino acids in a peptide is not necessary for self‐assembly. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Cationic oligopeptides with the repeating sequence L‐lysyl‐L‐alanyl‐L‐alanine: conformational and thermal stability study using optical spectroscopic methods

The infrared (IR), vibrational circular dichroism (VCD), and electronic circular dichroism (ECD) spectra of short cationic sequential peptides (L ‐Lys‐L ‐Ala‐L ‐Ala)_n (n = 1, 2, and 3) were measured over a range of temperatures (20–90 °C) in aqueous solution at near‐neutral pH values in order to investigate their solution conformations and thermally induced conformational changes. VCD spectra of all three oligopeptides measured in the amide I′ region indicate the presence of extended helical polyproline II (PPII)‐like conformation at room temperature. UV‐ECD spectra confirmed this conclusion. Thus, the oligopeptides adopt a PPII‐like conformation, independent of the length of the peptide chain. However, the optimized dihedral angles ? and ψ are within the range ?82 to ?107° and 143–154°, respectively, and differ from the canonical PPII values. At elevated temperatures, the observed intensity and bandshape variations in the VCD and ECD spectra show that the PPII‐like conformation of the Lys‐Ala‐Ala sequence is still preferred, being in equilibrium with an unordered conformer at near‐neutral pH values within the range of temperatures from 20 to 90 °C. This finding was obtained from analysis of the temperature‐dependent spectra using the singular value decomposition method. The study presents KAA‐containing oligopeptides as conformationally stable models of biologically important cationic peptides and proteins. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Structural adaptation of tooth enamel protein amelogenin in the presence of SDS micelles

Amelogenin, the major extracellular matrix protein of developing tooth enamel is intrinsically disordered. Through its interaction with other proteins and mineral, amelogenin assists enamel biomineralization by controlling the formation of highly organized enamel crystal arrays. We used circular dichroism (CD), dynamic light scattering (DLS), fluorescence, and NMR spectroscopy to investigate the folding propensity of recombinant porcine amelogenin rP172 following its interaction with SDS, at levels above critical micelle concentration. The rP172‐SDS complex formation was confirmed by DLS, while an increase in the structure moiety of rP172 was noted through CD and fluorescence experiments. Fluorescence quenching analyses performed on several rP172 mutants where all but one Trp was replaced by Tyr at different sequence regions confirmed that the interaction of amelogenin with SDS micelles occurs via the N‐terminal region close to Trp25 where helical segments can be detected by NMR. NMR spectroscopy and structural refinement calculations using CS‐Rosetta modeling confirm that the highly conserved N‐terminal domain is prone to form helical structure when bound to SDS micelles. Our findings reported here reveal interactions leading to significant changes in the secondary structure of rP172 upon treatment with SDS. These interactions may reflect the physiological relevance of the flexible nature of amelogenin and its sequence specific helical propensity that might enable it to structurally adapt with charged and potential targets such as cell surface, mineral, and other proteins during enamel biomineralization. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 525–535, 2014.     

Distinct solid and solution state self‐assembly pathways of RADA16‐I designer peptide

Solid state NMR measurements on selectively ¹³C‐labeled RADA16‐I peptide (COCH₃–RADARADARADARADA–NH₂) were used to obtain new molecular level information on the conversion of α‐helices to β‐sheets through self‐assembly in the solid state with increasing temperature. Isotopic labeling at the A4 C_β site enabled rapid detection of ¹³C NMR signals. Heating to 344–363 K with simultaneous NMR detection allowed production of samples with systematic variation of α‐helix and β‐strand content. These samples were then probed at room temperature for intermolecular ¹³C–¹³C nuclear dipolar couplings with the PITHIRDS‐CT NMR experiment. The structural transition was also characterized by Fourier transform infrared spectroscopy and wide angle X‐ray diffraction. Independence of PITHIRDS‐CT decay shapes on overall α‐helical and β‐strand content infers that β‐strands are not observed without association with β‐sheets, indicating that β‐sheets are formed at elevated temperatures on a timescale that is fast relative to the NMR experiment. PITHIRDS‐CT NMR data were compared with results of similar measurements on RADA16‐I nanofibers produced by self‐assembly in aqueous salt solution. We report that β‐sheets formed through self‐assembly in the solid state have a structure that differs from those formed through self‐assembly in the solution state. Specifically, solid state RADA16‐I self‐assembly produces in‐register parallel β‐sheets, whereas nanofibers are composed of stacked parallel β‐sheets with registry shifts between adjacent β‐strands in each β‐sheet. These results provide evidence for environment‐dependent self‐assembly mechanisms for RADA16‐I β‐sheets as well as new constraints on solid state self‐assembled structures, which must be avoided to maximize solution solubility and nanofiber yields. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Loss of biological control of enamel mineralization in amelogenin-phosphorylation-deficient mice

Amelogenin, the most abundant enamel matrix protein, plays several critical roles in enamel formation. Importantly, we previously found that the singular phosphorylation site at Ser16 in amelogenin plays an essential role in amelogenesis. Studies of genetically knock-in (KI) modified mice in which Ser16 in amelogenin is substituted with Ala that prevents amelogenin phosphorylation, and in vitro mineralization experiments, have shown that phosphorylated amelogenin transiently stabilizes amorphous calcium phosphate (ACP), the initial mineral phase in forming enamel. Furthermore, KI mice exhibit dramatic differences in the enamel structure compared with wild type (WT) mice, including thinner enamel lacking enamel rods and ectopic surface calcifications. Here, we now demonstrate that amelogenin phosphorylation also affects the organization and composition of mature enamel mineral. We compared WT, KI, and heterozygous (HET) enamel and found that in the WT elongated crystals are co-oriented within each rod, however, their c-axes are not aligned with the rods’ axes. In contrast, in rod-less KI enamel, crystalline c-axes are less co-oriented, with misorientation progressively increasing toward the enamel surface, which contains spherulites, with a morphology consistent with abiotic formation. Furthermore, we found significant differences in enamel hardness and carbonate content between the genotypes. ACP was also observed in the interrod of WT and HET enamel, and throughout aprismatic KI enamel. In conclusion, amelogenin phosphorylation plays crucial roles in controlling structural, crystallographic, mechanical, and compositional characteristics of dental enamel. Thus, loss of amelogenin phosphorylation leads to a reduction in the biological control over the enamel mineralization process.     

Microstructures of an amelogenin gel matrix.

The thermo-reversible transition (clear <--> opaque) of the amelogenin gel matrix, which has been known for some three decades, has now been clarified by microstructural investigations. A mixed amelogenin preparation extracted from porcine developing enamel matrix (containing "25K," 7.4%; "23K," 10.7%; "20K," 49.5%; and smaller peptides, 32.4%) was dissolved in dilute formic acid and reprecipitated by adjusting the pH to 6.8 with NaOH solution. Amelogenin gels were formed in vitro by sedimenting the precipitate in microcentrifuge tubes. The gels were fixed with Karnovsky fixative at 4 and 24 degrees C, which was found to preserve their corresponding clear (4 degrees C) and opaque (24 degrees C) states. Scanning electron microscopy, atomic force microscopy, and transmission electron microscopy were employed for the microstructural characterization of the fixed clear and opaque gels. The amelogenin gel matrix was observed to possess a hierarchical structure of quasi-spherical amelogenin nanospheres and their assemblies. The nanospheres of diameters 8-20 nm assemble to form small spherical assemblies of diameters 40-70 nm that further aggregated to form large spherical assemblies of 70-300 nm in diameter. In the clear gel, most of the large assemblies are smaller than 150 nm, and the nanospheres and assemblies are uniformly dispersed, allowing an even fluid distribution among them. In the opaque gel, however, numerous spherical fluid-filled spaces ranging from 0.3 to 7 microm in diameter were observed with the majority of the large assemblies sized 150-200 nm in diameter. These spaces presumably result from enhanced hydrophobic interactions among nanospheres and/or assemblies as the temperature increased. The high opacity of the opaque (24 degrees C) gel apparently arises from the presence of the numerous fluid-filled spaces observed compared to the low-temperature (4 degrees C) preparation. These observations suggest that the hydrophobic interactions among nanospheres and different orders of amelogenin assemblies are important in determining the structural integrity of the dental enamel matrix.     

In vitro preparation of amelogenin nanoparticles carrying nucleic acids

Amelogenin, a matrix protein involved in biomineralization of enamel, can self-assemble to form nanospheres in a pH-dependent manner. Nucleic acids (single-stranded, double-stranded, and plasmid DNA, as well as RNA) could be co-precipitated with amelogenin, demonstrating a strong binding of nucleic acids to amelogenin. The amounts of co-precipitated nucleic acids were analyzed and binding levels upto 90 μg DNA/mg amelogenin was achieved. The co-precipitation could also be carried out in a bacterial cell homogenate, and no bacterial proteins were found in the amelogenin aggregates, suggesting specificity for nucleic acid binding. Dynamic light scattering showed that amelogenin nanosphere structure is maintained upon DNA binding with an upto 2.6 nm increase in diameter. The reported binding of nucleic acids to amelogenin can be explored practically for nucleic acid separation.     

Progressive accretion of amelogenin molecules during nanospheres assembly revealed by atomic force microscopy.

Amelogenin proteins, the principal components of the developing dental enamel matrix, self-assemble to form nanosphere structures that are believed to function as structural components directly involved in the matrix mediated enamel biomineralization. The self-assembly behavior of a recombinant murine amelogenin (rM179) was investigated by atomic force microscopy (AFM) for further understanding the roles of amelogenin proteins in dental enamel biomineralization. Recombinant rM179 amelogenin was dissolved in a pH 7.4 Tris-HCl buffer at concentrations ranging from 12.5 to 300 microg/ml. The solutions were adsorbed on mica, fixed with Karnovsky fixative and rinsed thoroughly with water for atomic force microscopy (AFM). At low concentrations (12.5-50 microg/ml), nanospheres with diameters varying from 7 to 53 nm were identified while at concentrations ranging between 100-300 microg/ml the size distribution was significantly narrowed to be steadily between 10 and 25 nm in diameter. These nanospheres were observed to be the basic building blocks of both engineered rM179 gels and of the developing enamel extracellular matrix. The stable 15-20-nm nanosphere structures generated in the presence of high concentrations of amelogenins were postulated to be of great importance in facilitating the highly organized ultrastructural microenvironment required for the formation of initial enamel apatite crystallites.     

Binding of amelogenin to MMP-9 and their co-expression in developing mouse teeth

Amelogenin is the most abundant matrix protein in enamel. Proper amelogenin processing by proteinases is necessary for its biological functions during amelogenesis. Matrix metalloproteinase 9 (MMP-9) is responsible for the turnover of matrix components. The relationship between MMP-9 and amelogenin during tooth development remains unknown. We tested the hypothesis that MMP-9 binds to amelogenin and they are co-expressed in ameloblasts during amelogenesis. We evaluated the distribution of both proteins in the mouse teeth using immunohistochemistry and confocal microscopy. At postnatal day 2, the spatial distribution of amelogenin and MMP-9 was co-localized in preameloblasts, secretory ameloblasts, enamel matrix and odontoblasts. At the late stages of mouse tooth development, expression patterns of amelogenin and MMP-9 were similar to that seen in postnatal day 2. Their co-expression was further confirmed by RT-PCR, Western blot and enzymatic zymography analyses in enamel organ epithelial and odontoblast-like cells. Immunoprecipitation assay revealed that MMP-9 binds to amelogenin. The MMP-9 cleavage sites in amelogenin proteins across species were found using bio-informative software program. Analyses of these data suggest that MMP-9 may be involved in controlling amelogenin processing and enamel formation.