C‐terminal deletion of leucine‐rich repeats from YopM reveals a heterogeneous distribution of stability in a cooperatively folded protein

Terminal deletions of units from α‐helical repeat proteins have provided insight into the physical origins of their cooperativity. To test if the same principles governing cooperativity apply to β‐sheet‐containing repeat proteins, we have created a series of C‐terminal deletion constructs from a large leucine‐rich repeat (LRR) protein, YopM. We have examined the structure and stability of the resulting deletion constructs by a combination of solution spectroscopy, equilibrium denaturation studies, and limited proteolysis. Surprisingly, a high degree of nonuniformity was found in the stability distribution of YopM. Unlike previously studied repeat proteins, we identified several key LRR that on deletion disrupt nearby structure, at distances as far away as up to three repeats, in YopM. This partial unfolding model is supported by limited proteolysis studies and by point substitution in repeats predicted to be disordered as a result of deletion of adjacent repeats. We show that key internal‐ and terminal‐caps must be present to maintain the structural integrity in adjacent regions (roughly four LRRs long) of decreased stability. The finding that full‐length YopM maintains a high level of cooperativity in equilibrium unfolding underscores the importance of interfacial interactions in stabilizing locally unstable regions of structure.     

Crystal structure of a plant leucine rich repeat protein with two island domains

Leucine rich repeat(LRR)domain,characterized by a repetitive sequence pattern rich in leucine residues,is a universal protein-protein interaction motif present in all life forms.LRR repeats interrupted by sequences of 30 70 residues(termed island domain,ID)have been found in some plant LRR receptor-like kinases(RLKs)and animal Toll-like receptors(TLR7-9).Recent studies provide insight into how a single ID is structurally integrated into an LRR protein.However,structural information on an LRR protein with two IDs is lacking.The receptor-like protein kinase 2(RPK2)is an LRR-RLK and has important roles in controlling plant growth and development by perception and transduction of hormone signal.Here we present the crystal structure of the extracellular LRR domain of RPK2(RPK2-LRR)containing two IDs from Arabidopsis.The structure reveals that both of the IDs are helical and located at the central region of the single RPK2-LRR solenoid.One of them binds to the inner surface of the solenoid,whereas the other one mainly interacts with the lateral side.Unexpectedly,a long loop immediately following the N-terminal capping domain of RPK2-LRR is presented toward and sandwiched between the two IDs,further stabilizing their embedding to the LRR solenoid.A potential ligand binding site formed by the two IDs and the solenoid is located at the C-terminal side of RPK2-LRR.The structural information of RPK2-LRR broadens our understanding toward the large family of LRR proteins and provides insight into RPK2-mediated signaling.     

Consensus design of a NOD receptor leucine rich repeat domain with binding affinity for a muramyl dipeptide,a bacterial cell wall fragment

Repeat proteins have recently emerged as especially well‐suited alternative binding scaffolds due to their modular architecture and biophysical properties. Here we present the design of a scaffold based on the consensus sequence of the leucine rich repeat (LRR) domain of the NOD family of cytoplasmic innate immune system receptors. Consensus sequence design has emerged as a protein design tool to create de novo proteins that capture sequence‐structure relationships and interactions present in nature. The multiple sequence alignment of 311 individual LRRs, which are the putative ligand‐recognition domain in NOD proteins, resulted in a consensus sequence protein containing two internal and N‐ and C‐capping repeats named CLRR2. CLRR2 protein is a stable, monomeric, and cysteine free scaffold that without any affinity maturation displays micromolar binding to muramyl dipeptide, a bacterial cell wall fragment. To our knowledge, this is the first report of direct interaction of a NOD LRR with a physiologically relevant ligand.     

Assessment of the ability to model proteins with leucine-rich repeats in light of the latest structural information

The three-dimensional structures of leucine-rich repeat (LRR)-containing proteins from five different families were previously predicted based on the crystal structure of the ribonuclease inhibitor, using an approach that combined homology-based modeling, structure-based sequence alignment of LRRs, and several rational assumptions. The structural models have been produced based on very limited sequence similarity, which, in general, cannot yield trustworthy predictions. Recently, the protein structures from three of these five families have been determined. In this report we estimate the quality of the modeling approach by comparing the models with the experimentally determined structures. The comparison suggests that the general architecture, curvature, "interior/exterior" orientations of side chains, and backbone conformation of the LRR structures can be predicted correctly. On the other hand, the analysis revealed that, in some cases, it is difficult to predict correctly the twist of the overall super-helical structure. Taking into consideration the conclusions from these comparisons, we identified a new family of bacterial LRR proteins and present its structural model. The reliability of the LRR protein modeling suggests that it would be informative to apply similar modeling approaches to other classes of solenoid proteins.     

Crystal structure and standardized geometric analysis of InlJ, a listerial virulence factor and leucine-rich repeat protein with a novel cysteine ladder

We report on the crystal structure of the internalin domain of InlJ, a virulence-associated surface protein of Listeria monocytogenes, at 2.7-Å resolution. InlJ is a member of the internalin family of listerial cell surface proteins characterized by a common N-terminal domain. InlJ bears 15 leucine-rich repeats (LRRs), the same number as in InlA, the prototypical internalin family member. The LRRs of InlJ differ from those of other internalins by having 21, rather than 22, residues and by replacing 1 LRR-defining hydrophobic residue with a conserved cysteine. These cysteines stack to form an intramolecular ladder and regular hydrophobic interactions in consecutive repeats. Analyzing the curvature, twist, and lateral bending angles of InlJ and comparing these with several other LRR proteins, we provide a systematic geometric comparison of LRR protein structures (http://bragi2.helmholtz-hzi.de/Angulator/). These indicate that both cysteine and asparagine ladders stabilize the LRR fold, whereas substitutions in some repeat positions are more likely than others to induce changes in LRR geometry.     

Designing repeat proteins: modular leucine-rich repeat protein libraries based on the mammalian ribonuclease inhibitor family

We present a novel approach to design repeat proteins of the leucine-rich repeat (LRR) family for the generation of libraries of intracellular binding molecules. From an analysis of naturally occurring LRR proteins, we derived the concept to assemble repeat proteins with randomized surface positions from libraries of consensus repeat modules. As a guiding principle, we used the mammalian ribonuclease inhibitor (RI) family, which comprises cytosolic LRR proteins known for their extraordinary affinities to many RNases. By aligning the amino acid sequences of the internal repeats of human, pig, rat, and mouse RI, we derived a first consensus sequence for the characteristic alternating 28 and 29 amino acid residue A-type and B-type repeats. Structural considerations were used to replace all conserved cysteine residues, to define less conserved positions, and to decide where to introduce randomized amino acid residues. The so devised consensus RI repeat library was generated at the DNA level and assembled by stepwise ligation to give libraries of 2-12 repeats. Terminal capping repeats, known to shield the continuous hydrophobic core of the LRR domain from the surrounding solvent, were adapted from human RI. In this way, designed LRR protein libraries of 4-14 LRRs (equivalent to 130-415 amino acid residues) were obtained. The biophysical analysis of randomly chosen library members showed high levels of soluble expression in the Escherichia coli cytosol, monomeric behavior as characterized by gel-filtration, and alpha-helical CD spectra, confirming the success of our design approach.     

Comparative structural analysis of the binding domain of follicle stimulating hormone receptor

Proteins with leucine-rich repeats (LRRs) specialize in mediating protein-protein interactions. The hormone binding portion of the receptor for follicle stimulating hormone (FSH) is an LRR protein by sequence, and the crystal structure of this domain from human FSH receptor in a complex with FSH shows that it does indeed have an LRR structure. It differs from other LRR domains, however, in being an all-beta protein composed of highly irregular repeats and having only slight overall curvature. Despite these distinctions and a superficial resemblance to beta-helical proteins, the binding domain of FSH receptor clearly is an LRR protein. The structure does consist of two parts with distinctively different curvatures. Comparison with the structures of other LRR-containing proteins shows a correlation between curvature and main-chain hydrogen bonding pattern of the parallel beta-sheet. The hormone-binding site is located at the concave surface of the receptor structure, a feature common to proteins with LRR motifs. Analysis of the ligand-binding site of LRR-containing proteins reveals that they generally utilize extensive interface area and a large number of charged residues to facilitate high-affinity protein-protein interactions.     

Structural principles of leucine-rich repeat (LRR) proteins

LRR-containing proteins are present in over 2000 proteins from viruses to eukaryotes. Most LRRs are 20-30 amino acids long, and the repeat number ranges from 2 to 42. The known structures of 14 LRR proteins, each containing 4-17 repeats, have revealed that the LRR domains fold into a horseshoe (or arc) shape with a parallel beta-sheet on the concave face and with various secondary structures, including alpha-helix, 3(10)-helix, and pII helix on the convex face. We developed simple methods to charactere quantitatively the arc shape of LRR and then applied them to all known LRR proteins. A quantity of 2Rsin(phi/2), in which R and phi are the radii of the LRR arc and the rotation angle about the central axis per repeating unit, respectively, is highly conserved in all the LRR proteins regardless of a large variety of repeat number and the radius of the LRR arc. The radii of the LRR arc with beta-alpha structural units are smaller than those with beta-3(10) or beta-pII units. The concave face of the LRR beta-sheet forms a surface analogous to a part of a M?bius strip.     

Capping motifs stabilize the leucine‐rich repeat protein PP32 and rigidify adjacent repeats

Capping motifs are found to flank most β‐strand‐containing repeat proteins. To better understand the roles of these capping motifs in organizing structure and stability, we carried out folding and solution NMR studies on the leucine‐rich repeat (LRR) domain of PP32, which is composed of five tandem LRR, capped by α‐helical and β‐hairpin motifs on the N‐ and C‐termini. We were able to purify PP32 constructs lacking either cap and containing destabilizing substitutions. Removing the C‐cap results in complete unfolding of PP32. Removing the N‐cap has a much less severe effect, decreasing stability but retaining much of its secondary structure. In contrast, the dynamics and tertiary structure of the first two repeats are significantly perturbed, based on ¹H‐¹⁵N relaxation studies, chemical shift perturbations, and residual dipolar couplings. However, more distal repeats (3 to C‐cap) retain their native tertiary structure. In this regard, the N‐cap drives the folding of adjacent repeats from what appears to be a molten‐globule‐like state. This interpretation is supported by extensive analysis using core packing substitutions in the full‐length and N‐cap‐truncated PP32. This work highlights the importance of caps to the stability and structural integrity of β‐strand‐containing LRR proteins, and emphasizes the different contributions of the N‐ and C‐terminal caps.     

The tomato I gene for Fusarium wilt resistance encodes an atypical leucine‐rich repeat receptor‐like protein whose function is nevertheless dependent on SOBIR1 and SERK3/BAK1

We have identified the tomato I gene for resistance to the Fusarium wilt fungus Fusarium oxysporum f. sp. lycopersici (Fol) and show that it encodes a membrane‐anchored leucine‐rich repeat receptor‐like protein (LRR‐RLP). Unlike most other LRR‐RLP genes involved in plant defence, the I gene is not a member of a gene cluster and contains introns in its coding sequence. The I gene encodes a loopout domain larger than those in most other LRR‐RLPs, with a distinct composition rich in serine and threonine residues. The I protein also lacks a basic cytosolic domain. Instead, this domain is rich in aromatic residues that could form a second transmembrane domain. The I protein recognises the Fol Avr1 effector protein, but, unlike many other LRR‐RLPs, recognition specificity is determined in the C‐terminal half of the protein by polymorphic amino acid residues in the LRRs just preceding the loopout domain and in the loopout domain itself. Despite these differences, we show that I/Avr1‐dependent necrosis in Nicotiana benthamiana depends on the LRR receptor‐like kinases (RLKs) SERK3/BAK1 and SOBIR1. Sequence comparisons revealed that the I protein and other LRR‐RLPs involved in plant defence all carry residues in their last LRR and C‐terminal LRR capping domain that are conserved with SERK3/BAK1‐interacting residues in the same relative positions in the LRR‐RLKs BRI1 and PSKR1. Tyrosine mutations of two of these conserved residues, Q922 and T925, abolished I/Avr1‐dependent necrosis in N. benthamiana, consistent with similar mutations in BRI1 and PSKR1 preventing their interaction with SERK3/BAK1.     

Leucine-rich repeat (LRR) proteins: Integrators of pattern recognition and signaling in immunity

The leucine-rich repeats (LRR)-containing domain is evolutionarily conserved in many proteins associated with innate immunity in plants, invertebrates and vertebrates. Serving as a first line of defense, the innate immune response is initiated through the sensing of pathogen-associated molecular patterns (PAMPs). In plants, NBS (nucleotide-binding site)-LRR proteins provide recognition of pathogen products of avirulence (AVR) genes. LRRs also promote interaction between LRR proteins as observed in receptor-coreceptor complexes. In mammals, toll-like receptors (TLRs) and NOD-like receptors (NLRs) through their LRR domain, sense molecular determinants from a structurally diverse set of bacterial, fungal, parasite and viral-derived components. In humans, at least 34 LRR proteins are implicated in diseases. Most LRR domains consist of 2–45 leucine-rich repeats, with each repeat about 20–30 residues long. Structurally, LRR domains adopt an arc or horseshoe shape, with the concave face consisting of parallel β-strands and the convex face representing a more variable region of secondary structures including helices. Apart from the TLRs and NLRs, most of the 375 human LRR proteins remain uncharacterized functionally. We incorporated computational and functional analyses to facilitate multifaceted insights into human LRR proteins and outline a few approaches here.     

Origin and Evolution of GALA-LRR,a New Member of the CC-LRR Subfamily: From Plants to Bacteria?

The phytopathogenic bacterium Ralstonia solanacearum encodes type III effectors, called GALA proteins, which contain F-box and LRR domains. The GALA LRRs do not perfectly fit any of the previously described LRR subfamilies. By applying protein sequence analysis and structural prediction, we clarify this ambiguous case of LRR classification and assign GALA-LRRs to CC-LRR subfamily. We demonstrate that side-by-side packing of LRRs in the 3D structures may control the limits of repeat variability within the LRR subfamilies during evolution. The LRR packing can be used as a criterion, complementing the repeat sequences, to classify newly identified LRR domains. Our phylogenetic analysis of F-box domains proposes the lateral gene transfer of bacterial GALA proteins from host plants. We also present an evolutionary scenario which can explain the transformation of the original plant LRRs into slightly different bacterial LRRs. The examination of the selective evolutionary pressure acting on GALA proteins suggests that the convex side of their horse-shoe shaped LRR domains is more prone to positive selection than the concave side, and we therefore hypothesize that the convex surface might be the site of protein binding relevant to the adaptor function of the F-box GALA proteins. This conclusion provides a strong background for further functional studies aimed at determining the role of these type III effectors in the virulence of R. solanacearum.     

Leucine-rich repeat (LRR) proteins: integrators of pattern recognition and signaling in immunity

The leucine-rich repeats (LRR)-containing domain is evolutionarily conserved in many proteins associated with innate immunity in plants, invertebrates and vertebrates. Serving as a first line of defense, the innate immune response is initiated through the sensing of pathogen-associated molecular patterns (PAMPs). In plants, NBS (nucleotide-binding site)-LRR proteins provide recognition of pathogen products of avirulence (AVR) genes. LRRs also promote interaction between LRR proteins as observed in receptor-coreceptor complexes. In mammals, toll-like receptors (TLRs) and NOD-like receptors (NLRs) through their LRR domain, sense molecular determinants from a structurally diverse set of bacterial, fungal, parasite and viral-derived components. In humans, at least 34 LRR proteins are implicated in diseases. Most LRR domains consist of 2-45 leucine-rich repeats, with each repeat about 20-30 residues long. Structurally, LRR domains adopt an arc or horseshoe shape, with the concave face consisting of parallel β-strands and the convex face representing a more variable region of secondary structures including helices. Apart from the TLRs and NLRs, most of the 375 human LRR proteins remain uncharacterized functionally. We incorporated computational and functional analyses to facilitate multifaceted insights into human LRR proteins and outline a few approaches here.     

Common occurrence of internal repeat symmetry in membrane proteins

Symmetry plays significant roles in protein structure and function. Particularly, symmetric interfaces are known to act as switches for two-state conformational change. Membrane proteins often undergo two-state conformational change during the transport process of ion channels or the active/inactive transitions in receptors. Here, we provide the first comprehensive analyses of internal repeat symmetry in membrane proteins. We examined the known membrane protein structures and found that, remarkably, nearly half of them have internal repeat symmetry. Moreover, we found that the conserved cores of these internal repeats are positioned at the interface of symmetric units when they are mapped on structures. Because of the large sequence divergence that occurs between internal repeats, the inherent symmetry present in protein sequences often has only been detected after structure determination. We therefore developed a sensitive procedure to predict the internal repeat symmetry from sequence information and identified 4653 proteins that are likely to have internal repeat symmetry.     

神经系统中富亮氨酸重复序列跨膜蛋白的功能研究进展

富亮氨酸重复序列(leucine-rich repeat, LRR)是一种常见的蛋白质结构域．含有富亮氨酸重复序列的蛋白质简称LRR蛋白．LRR蛋白在真核生物和原核生物的细胞和组织中广泛分布,其定位的特异性以及与之相互作用蛋白质的复杂性,决定了LRR蛋白功能的多样性．许多LRR蛋白相对特异性表达于神经系统,绝大多数在神经系统中高表达的LRR蛋白属于跨膜蛋白,它们主要作为细胞黏附分子或配体结合蛋白参与突触的形成、神经突起的生长发育、神经递质的转移和释放等神经系统正常生理活动．LRR蛋白的异常表达将会导致神经、精神系统疾病的发生．     

The small heat shock protein 20 RSI2 interacts with and is required for stability and function of tomato resistance protein I‐2

Race‐specific disease resistance in plants depends on the presence of resistance (R) genes. Most R genes encode NB‐ARC‐LRR proteins that carry a C‐terminal leucine‐rich repeat (LRR). Of the few proteins found to interact with the LRR domain, most have proposed (co)chaperone activity. Here, we report the identification of RSI2 (Required for Stability of I‐2) as a protein that interacts with the LRR domain of the tomato R protein I‐2. RSI2 belongs to the family of small heat shock proteins (sHSPs or HSP20s). HSP20s are ATP‐independent chaperones that form oligomeric complexes with client proteins to prevent unfolding and subsequent aggregation. Silencing of RSI2‐related HSP20s in Nicotiana benthamiana compromised the hypersensitive response that is normally induced by auto‐active variants of I‐2 and Mi‐1, a second tomato R protein. As many HSP20s have chaperone properties, the involvement of RSI2 and other R protein (co)chaperones in I‐2 and Mi‐1 protein stability was examined. RSI2 silencing compromised the accumulation of full‐length I‐2 in planta, but did not affect Mi‐1 levels. Silencing of heat shock protein 90 (HSP90) and SGT1 led to an almost complete loss of full‐length I‐2 accumulation and a reduction in Mi‐1 protein levels. In contrast to SGT1 and HSP90, RSI2 silencing led to accumulation of I‐2 breakdown products. This difference suggests that RSI2 and HSP90/SGT1 chaperone the I‐2 protein using different molecular mechanisms. We conclude that I‐2 protein function requires RSI2, either through direct interaction with, and stabilization of I‐2 protein or by affecting signalling components involved in initiation of the hypersensitive response.     

Leucine‐rich repeat receptor‐like kinase II phylogenetics reveals five main clades throughout the plant kingdom

Receptor‐like kinases (RLKs) represent the largest group of cell surface receptors in plants. The monophyletic leucine‐rich repeat (LRR)‐RLK subfamily II is considered to contain the somatic embryogenesis receptor kinases (SERKs) and NSP‐interacting kinases known to be involved in developmental processes and cellular immunity in plants. There are only a few published studies on the phylogenetics of LRR‐RLKII; unfortunately these suffer from poor taxon/gene sampling. Hence, it is not clear how many and what main clades this family contains, let alone what structure–function relationships exist. We used 1342 protein sequences annotated as ‘SERK’ and ‘SERK‐like’ plus related sequences in order to estimate phylogeny within the LRR‐RLKII clade, using the nematode protein kinase Pelle as an outgroup. We reconstruct five main clades (LRR‐RLKII 1–5), in each of which the main pattern of land plant relationships re‐occurs, confirming previous hypotheses that duplication events happened in this gene subfamily prior to divergence among land plant lineages. We show that domain structures and intron–exon boundaries within the five clades are well conserved in evolution. Furthermore, phylogenetic patterns based on the separate LRR and kinase parts of LRR‐RLKs are incongruent: whereas the LRR part supports a LRR‐RLKII 2/3 sister group relationship, the kinase part supports clades 1/2. We infer that the kinase part includes few ‘radical’ amino acid changes compared with the LRR part. Finally, our results confirm that amino acids involved in each LRR‐RLKII–receptor complex interaction are located at N‐capping residues, and that the short amino acid motifs of this interaction domain are highly conserved throughout evolution within the five LRR‐RLKII clades.     

Leucine-rich repeat region of decorin binds to filamin-A

Decorin is a member of the family of small leucine-rich proteoglycans found in the extracellular matrix and has an important role in promoting fiber formation and in controlling cell proliferation. Here, we have investigated whether the leucine-rich repeat (LRR) region of decorin interacts with proteins from human lung fibroblasts by using a yeast two-hybrid assay. We report that the LRR region of decorin interacts with the cytoskeletal protein, filamin-A (ABP-280), a peripheral cytoplasmic protein. This interaction is dependent on the 288 carboxyl-terminal amino acids of filamin-A, which correspond to repeats 22-24 of its conserved beta-sheet structure. We also show that the recombinant LRR region of decorin binds to filamin-A in vitro, and that the deglycosylated core protein of decorin coprecipitates with filamin-A, whereas intact decorin does not. Together, these results suggest that proteins containing the LRR motif that interact with filamin-A may be present in the cytoplasm or at the plasma membrane.     

高等植物的LRR蛋白:结构与功能

ＬＲＲ结构存在于细胞定位和功能上各不相同的多种蛋白质中,与蛋白质之间的相互作用和细胞内的信号传递过程密切相关。植物中含ＬＲＲ的蛋白主要有类受体蛋白激酶、抗病基因编码的蛋白和多聚半乳糖醛酸酶抑制蛋白等,它们分别在细胞的生长发育、抗病反应等过程中发挥着重要作用,其相似的ＬＲＲ结构为从分子水平上研究这些蛋白的作用机制提供了结构基础。     

Discovery of a novel long terminal repeat (LTR2i_SS) in Sus Scrofa

Long terminal repeat (LTR) retrotransposons are transposable elements flanked by 5′/3′ LTRs. They have a structure similar to endogenous retroviruses, but they lack the envelope (env) gene making them non‐infectious. Long terminal repeats are motif‐rich sequences and can act as bidirectional promoters or enhancers to regulate or inactivate genes by insertion. In this study, we identified a new chimeric LTR subfamily, LTR2i_SS, in the pig genome. This chimeric LTR family appears to be the ancestral form of the previously described LTR2_SS family. LTR2_SS appears to have deleted ~300 bp of un‐annotated, ancestral sequence from LTR2i_SS. We identified no functional provirus sequences for either of these LTR types. LTR2i_SS sequences have been exapted into the untranslated regions of two protein‐coding gene mRNAs. Both of these genes lie within previously mapped pig quantitative trait loci.